Marcelo Nalin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Marcelo Nalin has a total of 384 co-authors. Here are the top co-authors by number of shared publications:
- Sidney Jose Lima Ribeiro
Institute of Chemistry
27 shared publications - Danilo Manzani
São Carlos Institute of Chemistry, University of São Paulo, IQSC-USP, PO Box 780, 13560-970, São Carlos, Brazil
12 shared publications Y. Messaddeq
Sao Paulo State Univ, UNESP, Inst Chem, LAMF, Araraquara, SP, Brazil
12 shared publications- Douglas Faza Franco
São Paulo State University (UNESP)
11 shared publications Douglas Faza Franco
10 shared publications- Gael Poirier
Universidade Federal de Alfenas, Brazil
10 shared publications
Latest Publications
- Open Access
- 5 October 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (21) , 8783-8794
Systematic Replacement of PbO by BaO for TGG Single Crystal Production Using the Supersaturated Glass-Melt Method
This study demonstrates the controlled nucleation and growth of high-quality terbium gallium garnet (TGG, Tb3Ga5O12) single crystals in PbO-free BaO-based glass ceramics through a sustainable supersaturated glass-melt approach. Using a new multicomponent glass composition and optimized thermal treatments, controlled nucleation and growth of well-defined cubic TGG crystals (5−50 μm) were achieved within the glass matrix while maintaining high optical transparency. Structural characterization by powder and single-crystal X-ray diffraction confirmed the formation of phase-pure TGG cubic garnet (space group Ia3̅d) with lattice parameters consistent with reference TGG crystals. Raman and FTIR spectroscopy verified the preservation of the garnet structure, while SEM−EDS analysis revealed a homogeneous elemental distribution between the crystalline phase and the surrounding glass matrix. Optical measurements showed good transparency across the visible and near-infrared regions, characteristic of TGG materials. Magnetic characterization of the Pb-free composition exhibited typical paramagnetic behavior, with Curie−Weiss analysis yielding an effective magnetic moment (μeff ≈ 9.62 μB) close to the theoretical value for Tb3+ ions and indicating weak antiferromagnetic interactions (θ = −5.78 K). These results demonstrate that BaO can successfully replace PbO without altering the structural or magnetic properties of TGG, providing an environmentally safer route for producing TGG crystals for magneto-optical applications.
- 5 October 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (21) , 8783-8794
Open AccessSystematic Replacement of PbO by BaO for TGG Single Crystal Production Using the Supersaturated Glass-Melt Method
This study demonstrates the controlled nucleation and growth of high-quality terbium gallium garnet (TGG, Tb3Ga5O12) single crystals in PbO-free BaO-based glass ceramics through a sustainable supersaturated glass-melt approach. Using a new multicomponent glass composition and optimized thermal treatments, controlled nucleation and growth of well-defined cubic TGG crystals (5−50 μm) were achieved within the glass matrix while maintaining high optical transparency. Structural characterization by powder and single-crystal X-ray diffraction confirmed the formation of phase-pure TGG cubic garnet (space group Ia3̅d) with lattice parameters consistent with reference TGG crystals. Raman and FTIR spectroscopy verified the preservation of the garnet structure, while SEM−EDS analysis revealed a homogeneous elemental distribution between the crystalline phase and the surrounding glass matrix. Optical measurements showed good transparency across the visible and near-infrared regions, characteristic of TGG materials. Magnetic characterization of the Pb-free composition exhibited typical paramagnetic behavior, with Curie−Weiss analysis yielding an effective magnetic moment (μeff ≈ 9.62 μB) close to the theoretical value for Tb3+ ions and indicating weak antiferromagnetic interactions (θ = −5.78 K). These results demonstrate that BaO can successfully replace PbO without altering the structural or magnetic properties of TGG, providing an environmentally safer route for producing TGG crystals for magneto-optical applications.
- Open Access
- 7 August 2026
- Published by Elsevier in Optical Materials: X
- Vol. 31
Terbium-containing aluminoborate glasses and fibers for magneto-optical applications
- 7 August 2026
- Published by Elsevier in Optical Materials: X
- Vol. 31
Open AccessTerbium-containing aluminoborate glasses and fibers for magneto-optical applications
- 7 May 2026
- Published by Elsevier in Optical Materials
- Vol. 177
The photoluminescence property of Tb3+ and Eu3+ co-doped P2O5–Al2O3–BaO–PbO–ZnO glasses for photonic applications
- 7 May 2026
- Published by Elsevier in Optical Materials
- Vol. 177
The photoluminescence property of Tb3+ and Eu3+ co-doped P2O5–Al2O3–BaO–PbO–ZnO glasses for photonic applications
- Open Access
Multimode Magneto-Optical Fiber Based on Borogermanate Glass Containing Tb3+ for Sensing Applications
A multimode magneto-optical fiber based on Tb3+-containing borogermanate glass was designed, fabricated, and characterized, aiming at potential sensing applications. There are continuing challenges in the development of single-mode (SMF) or multimode (MMF) optical fibers doped with rare-earth (RE) ions and exhibiting high Verdet constants, related to devitrification of the precursor glass. Most RE-doped glass compositions are not suitable as precursors for core-cladding fiber production due to devitrification processes and consequent poor optical quality. Application as Faraday rotators is limited by the intrinsically low Verdet constant of silica (~0.589 rad T−1 m−1 at 1550 nm and 0.876 rad T−1 m−1 at 1310 nm). Borogermanate glasses are good candidates for manufacturing optical fibers due to their excellent potential to solubilize high concentrations of Tb3+ ions as well as satisfactory thermal stability. In this work, a magneto-optical core-cladding borogermanate fiber with a 227 μm diameter was fabricated, with characterization using differential scanning calorimetry (DSC), thermomechanical analysis (TMA), viscosity measurements, M-lines spectroscopy, UV-Vis-NIR absorption spectroscopy, the cut-back technique, and magneto-optical measurements. The measured numerical aperture (NA) was 0.183, with minimum attenuation of 13 dB m−1 at 1270 nm. The Verdet constant (VB) reached −6.74 rad T−1 m−1 at 1330 nm.
Open AccessMultimode Magneto-Optical Fiber Based on Borogermanate Glass Containing Tb3+ for Sensing Applications
A multimode magneto-optical fiber based on Tb3+-containing borogermanate glass was designed, fabricated, and characterized, aiming at potential sensing applications. There are continuing challenges in the development of single-mode (SMF) or multimode (MMF) optical fibers doped with rare-earth (RE) ions and exhibiting high Verdet constants, related to devitrification of the precursor glass. Most RE-doped glass compositions are not suitable as precursors for core-cladding fiber production due to devitrification processes and consequent poor optical quality. Application as Faraday rotators is limited by the intrinsically low Verdet constant of silica (~0.589 rad T−1 m−1 at 1550 nm and 0.876 rad T−1 m−1 at 1310 nm). Borogermanate glasses are good candidates for manufacturing optical fibers due to their excellent potential to solubilize high concentrations of Tb3+ ions as well as satisfactory thermal stability. In this work, a magneto-optical core-cladding borogermanate fiber with a 227 μm diameter was fabricated, with characterization using differential scanning calorimetry (DSC), thermomechanical analysis (TMA), viscosity measurements, M-lines spectroscopy, UV-Vis-NIR absorption spectroscopy, the cut-back technique, and magneto-optical measurements. The measured numerical aperture (NA) was 0.183, with minimum attenuation of 13 dB m−1 at 1270 nm. The Verdet constant (VB) reached −6.74 rad T−1 m−1 at 1330 nm.
- 17 April 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (13) , 4709-4713
Novel scalable synthesis of luminescent and magnetic single crystal garnets
This letter reports a novel method for synthesizing RE 3 Ga 5 O 12 , RE 3 Al 5 O 12 , and RE 3 Fe 5 O 12 single-crystal garnets, where RE refers to rare earth elements, including Sc and Y.
- 17 April 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (13) , 4709-4713
Novel scalable synthesis of luminescent and magnetic single crystal garnets
This letter reports a novel method for synthesizing RE 3 Ga 5 O 12 , RE 3 Al 5 O 12 , and RE 3 Fe 5 O 12 single-crystal garnets, where RE refers to rare earth elements, including Sc and Y.
- Open Access
- 10 October 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (42) , 13300-13306
Probing the Nature of Single-Photon Emitters in a WSe2 Monolayer by Magneto-Photoluminescence Spectroscopy
Monolayer transition metal dichalcogenides (TMDs) have emerged as promising materials to generate single-photon emitters (SPEs). While there are several previous reports in the literature about TMD-based SPEs, the precise nature of the excitonic states involved in them is still under debate. Here, we use magneto-optical techniques under in-plane and out-of-plane magnetic fields to investigate the nature of SPEs in WSe2 monolayers on glass substrates under different strain profiles. Our results reveal important changes on the exciton localization and, consequently, on the optical properties of SPEs. Remarkably, we observe an anomalous PL energy redshift with no significant changes of photoluminescence (PL) intensity under an in-plane magnetic field. We present a model to explain this redshift based on intervalley defect excitons under a parallel magnetic field. Overall, our results offer important insights into the nature of SPEs in TMDs, which are valuable for future applications in quantum technologies.
- 10 October 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (42) , 13300-13306
Open AccessProbing the Nature of Single-Photon Emitters in a WSe2 Monolayer by Magneto-Photoluminescence Spectroscopy
Monolayer transition metal dichalcogenides (TMDs) have emerged as promising materials to generate single-photon emitters (SPEs). While there are several previous reports in the literature about TMD-based SPEs, the precise nature of the excitonic states involved in them is still under debate. Here, we use magneto-optical techniques under in-plane and out-of-plane magnetic fields to investigate the nature of SPEs in WSe2 monolayers on glass substrates under different strain profiles. Our results reveal important changes on the exciton localization and, consequently, on the optical properties of SPEs. Remarkably, we observe an anomalous PL energy redshift with no significant changes of photoluminescence (PL) intensity under an in-plane magnetic field. We present a model to explain this redshift based on intervalley defect excitons under a parallel magnetic field. Overall, our results offer important insights into the nature of SPEs in TMDs, which are valuable for future applications in quantum technologies.
- Open Access
- 16 September 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (38) , 51253-51264
Fabrication and Performance Evaluation of a Nanostructured ZnO-Based Solid-State Electrochromic Device
In this study, we present an all-solid-state electrochromic device (ECD) that eliminates the need for hard-to-obtain materials and conventional liquid/gel electrolytes. Using a cost-effective and industrially scalable spray coating technique, we developed an ECD containing a layer of zinc oxide nanorods (ZnOnano) synthesized via a simple solochemical route. The device configuration includes a preformed Al-coated glass substrate, acting as a counter electrode, within a glass/Al/ZnOnano/PEDOT:PSS architecture. The device exhibits reversible switching between light blue and dark blue states upon application of -1.2 V and +2.8 V, respectively, with a significant difference in transmittance between bleached and colored states in the visible-NIR spectrum, featuring a high coloration efficiency of 275.62 cm2/C at 600 nm. The response times required for both coloring and bleaching states were 9.92 s and 7.51 s, respectively, for a sample with an active area of 5.5 × 2.5 cm2. Regarding the electrochemical stability of the ZnO-based ECD, the transmittance modulation reached around 8.01% at 600 nm after 12,800 s, following initial variations observed during the first 10 cycles. These results represent significant progress in electrochromic technology, offering a sustainable and efficient alternative to traditional ECDs. The use of economical fabrication techniques and the exclusion of critical materials highlight the potential for widespread industrial adoption of this novel ECD design.
- 16 September 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (38) , 51253-51264
Open AccessFabrication and Performance Evaluation of a Nanostructured ZnO-Based Solid-State Electrochromic Device
In this study, we present an all-solid-state electrochromic device (ECD) that eliminates the need for hard-to-obtain materials and conventional liquid/gel electrolytes. Using a cost-effective and industrially scalable spray coating technique, we developed an ECD containing a layer of zinc oxide nanorods (ZnOnano) synthesized via a simple solochemical route. The device configuration includes a preformed Al-coated glass substrate, acting as a counter electrode, within a glass/Al/ZnOnano/PEDOT:PSS architecture. The device exhibits reversible switching between light blue and dark blue states upon application of -1.2 V and +2.8 V, respectively, with a significant difference in transmittance between bleached and colored states in the visible-NIR spectrum, featuring a high coloration efficiency of 275.62 cm2/C at 600 nm. The response times required for both coloring and bleaching states were 9.92 s and 7.51 s, respectively, for a sample with an active area of 5.5 × 2.5 cm2. Regarding the electrochemical stability of the ZnO-based ECD, the transmittance modulation reached around 8.01% at 600 nm after 12,800 s, following initial variations observed during the first 10 cycles. These results represent significant progress in electrochromic technology, offering a sustainable and efficient alternative to traditional ECDs. The use of economical fabrication techniques and the exclusion of critical materials highlight the potential for widespread industrial adoption of this novel ECD design.
- Open Access
- 31 May 2024
- Published by IOP Publishing in Journal of Physics: Materials
- Vol. 7 (3) , 03LT01
Micrometric patterning of a borogermanate glass containing terbium by thermal poling to manage luminescence and second order optical properties
Borogermanate glasses containing terbium ions are interesting materials due to their luminescent and magnetic properties. Terbium can present two different oxidation states and the thermal poling technique can be a pertinent way to modulate spatially the oxidation state of these ions. In this work, we demonstrate using a thermo-electrical imprinting process the transfer of micro scaled motifs on the surface of a borogermanate glass containing Tb3+ resulting in a micrometric structuring of the oxidation state of Tb3+/Tb4+ ions. A large change in absorption and luminescence optical properties is observed, arising from the distinct properties of trivalent and tetravalent terbium ions. Correlative micro luminescence, Raman and second harmonic generation measurements were carried out on the patterned poled glass surface. This has demonstrated an accurate concomitant modification of the glass structure accompanying large luminescence changes and the appearance of a second order optical response which could be attributed to a localized space charge implantation. These original results demonstrate how a simple electrical process allows managing multi optical properties but also paves the way to induce static electrical functionalities in a magnetic optical glassy system.
- 31 May 2024
- Published by IOP Publishing in Journal of Physics: Materials
- Vol. 7 (3) , 03LT01
Open AccessMicrometric patterning of a borogermanate glass containing terbium by thermal poling to manage luminescence and second order optical properties
Borogermanate glasses containing terbium ions are interesting materials due to their luminescent and magnetic properties. Terbium can present two different oxidation states and the thermal poling technique can be a pertinent way to modulate spatially the oxidation state of these ions. In this work, we demonstrate using a thermo-electrical imprinting process the transfer of micro scaled motifs on the surface of a borogermanate glass containing Tb3+ resulting in a micrometric structuring of the oxidation state of Tb3+/Tb4+ ions. A large change in absorption and luminescence optical properties is observed, arising from the distinct properties of trivalent and tetravalent terbium ions. Correlative micro luminescence, Raman and second harmonic generation measurements were carried out on the patterned poled glass surface. This has demonstrated an accurate concomitant modification of the glass structure accompanying large luminescence changes and the appearance of a second order optical response which could be attributed to a localized space charge implantation. These original results demonstrate how a simple electrical process allows managing multi optical properties but also paves the way to induce static electrical functionalities in a magnetic optical glassy system.
- 20 January 2024
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 627
Paramagnetic borotungstate glasses with high terbium concentration for magneto-optical applications
- 20 January 2024
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 627
Paramagnetic borotungstate glasses with high terbium concentration for magneto-optical applications
- 15 December 2023
- Published by Elsevier in Optical Materials
- Vol. 147
Magnetic and magneto-optical properties of manganese-containing antimony phosphate glasses – An alternative to Faraday rotators
- 15 December 2023
- Published by Elsevier in Optical Materials
- Vol. 147
Magnetic and magneto-optical properties of manganese-containing antimony phosphate glasses – An alternative to Faraday rotators