Anatoliy Zelinskiy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anatoliy Zelinskiy has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Andriy Horyn
Ivan Franko National University of Lviv, 6, Kyryla and Mefodiya Str., Lviv, 79005, Ukraine
3 shared publications - Lyubov Romaka
Ivan Franko National University of Lviv, 6, Kyryla and Mefodiya Str., Lviv, 79005, Ukraine
3 shared publications - Oleksandr Gromyko
Microbial Culture Collection of Antibiotic Producers, Ivan Franko National University of Lviv, Lviv, Ukraine
3 shared publications - Olga Klyuchivska
Department of Regulation of Cell Proliferation and Apoptosis, Institute of Cell Biology, National Academy of Sciences of Ukraine, Lviv, Ukraine
3 shared publications - Rostyslav Stoika
Department of Regulation of Cell Proliferation and Apoptosis, Institute of Cell Biology, National Academy of Sciences of Ukraine, Lviv, Ukraine
3 shared publications - Volodymyr O. Vasylechko
Ivan Franko National University of Lviv, Lviv, Ukraine
3 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 3,p. 5-18
Features of the Electrical Conductivity Mechanisms of the New Semiconductor Thermoelectric Material Hf1-xScxNiSn
The structural, thermodynamic, energetic, electrokinetic, and magnetic properties of the new semiconductor thermoelectric material Hf1-xScxNiSn, х=0–0.07, obtained by introducing Sc atoms into the structure of the HfNiSn compound by replacing Hf atoms, were investigated. The features of the transformation of the crystal and electronic structures, as well as the nature of the generated energy states and mechanisms of electrical conductivity, were established. Analysis of the electron density function based on Bader’s quantum theory for the HfNiSn and Hf0.75Sc0.25NiSn compounds confirmed the experimental conclusions regarding the generation in Hf1-xScxNiSn of structural defects of acceptor nature only and the corresponding energy states. High values of the specific electrical conductivity and the thermopower coefficient correspond to the condition of maximum efficiency of thermal-to-electrical energy conversion, making Hf1-xScxNiSn a promising thermoelectric material.
- 30 September 2026
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 3,p. 5-18
Open AccessFeatures of the Electrical Conductivity Mechanisms of the New Semiconductor Thermoelectric Material Hf1-xScxNiSn
The structural, thermodynamic, energetic, electrokinetic, and magnetic properties of the new semiconductor thermoelectric material Hf1-xScxNiSn, х=0–0.07, obtained by introducing Sc atoms into the structure of the HfNiSn compound by replacing Hf atoms, were investigated. The features of the transformation of the crystal and electronic structures, as well as the nature of the generated energy states and mechanisms of electrical conductivity, were established. Analysis of the electron density function based on Bader’s quantum theory for the HfNiSn and Hf0.75Sc0.25NiSn compounds confirmed the experimental conclusions regarding the generation in Hf1-xScxNiSn of structural defects of acceptor nature only and the corresponding energy states. High values of the specific electrical conductivity and the thermopower coefficient correspond to the condition of maximum efficiency of thermal-to-electrical energy conversion, making Hf1-xScxNiSn a promising thermoelectric material.
- Open Access
- 22 September 2026
- Published by Elsevier in Results in Surfaces and Interfaces
- Vol. 25
Synthesis and characterization of novel clinoptilolite composite doped with silver (Ag+) and copper (Cu2+) cations and assessment of its disinfecting potential towards laboratory and pathogenic strains of Staphylococcus aureus and Pseudomonas aeruginosa
- 22 September 2026
- Published by Elsevier in Results in Surfaces and Interfaces
- Vol. 25
Open AccessSynthesis and characterization of novel clinoptilolite composite doped with silver (Ag+) and copper (Cu2+) cations and assessment of its disinfecting potential towards laboratory and pathogenic strains of Staphylococcus aureus and Pseudomonas aeruginosa
- Open Access
- 1 April 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (13)
Influence of cadmium ion doping on luminescence of CsPbBr3 single crystals
The effect of impurity doping with cadmium ions on the luminescent properties of CsPbBr3 perovskite single crystals has been investigated. The luminescence spectra of pure and Cd-activated CsPbBr3 crystals, obtained upon excitation with synchrotron radiation, reveal characteristic excitonic bands, which are interpreted as the emission of free and bound excitons in the vicinity of the crystal absorption edge, a broadband luminescence at 556.3 nm, and additional luminescence bands at 920 nm. The introduction of Cd is shown to result in an increase in the intensity of the excitonic luminescence, the emergence of supplementary emission bands due to the scattering of excitons on quasilocal lattice vibrations, and a shift of the near-edge luminescence bands toward the high-energy region. Cadmium doping is proposed to improve the tolerance factor of the perovskite structure, reduce the concentration of bromine vacancies, and increase the formation energy of anionic vacancies in Cd–Br pairs, thereby limiting halogen diffusion. These modifications lead to a reduction in non-radiative relaxation channels and enhance the efficiency of near-edge luminescence by a factor of 4. The luminescence band at 920 nm is attributed to the emission of radiation-induced defects. The results obtained highlight the potential of CsPbBr3–Cd single crystals for the development of fast scintillators with improved light output.
- 1 April 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (13)
Open AccessInfluence of cadmium ion doping on luminescence of CsPbBr3 single crystals
The effect of impurity doping with cadmium ions on the luminescent properties of CsPbBr3 perovskite single crystals has been investigated. The luminescence spectra of pure and Cd-activated CsPbBr3 crystals, obtained upon excitation with synchrotron radiation, reveal characteristic excitonic bands, which are interpreted as the emission of free and bound excitons in the vicinity of the crystal absorption edge, a broadband luminescence at 556.3 nm, and additional luminescence bands at 920 nm. The introduction of Cd is shown to result in an increase in the intensity of the excitonic luminescence, the emergence of supplementary emission bands due to the scattering of excitons on quasilocal lattice vibrations, and a shift of the near-edge luminescence bands toward the high-energy region. Cadmium doping is proposed to improve the tolerance factor of the perovskite structure, reduce the concentration of bromine vacancies, and increase the formation energy of anionic vacancies in Cd–Br pairs, thereby limiting halogen diffusion. These modifications lead to a reduction in non-radiative relaxation channels and enhance the efficiency of near-edge luminescence by a factor of 4. The luminescence band at 920 nm is attributed to the emission of radiation-induced defects. The results obtained highlight the potential of CsPbBr3–Cd single crystals for the development of fast scintillators with improved light output.
- Open Access
- 31 March 2026
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 1
Research on a New Semiconductor Thermoelectric Material n-Zr1-xNbxNiSn. I. Experimental Results
The structural, electrokinetic, energetic, and magnetic properties of the new semiconductor thermoelectric material n-Zr1-xNbxNiSn, х = 0–0.07, obtained by doping n-ZrNiSn with Nb atoms (4d45s1) by replacing Zr atoms (4d25s2) were investigated. The nature of the generated energy states and mechanisms of electrical conductivity were established. It was shown that in the n-Zr1-xNbxNiSn structure, there is a simultaneous substitution of Zr atoms by Nb atoms in different ratios, as well as the occupation of tetrahedral voids of the structure by Nb atoms. The decrease in the unit cell parameter a(x) of n-Zr1-xNbxNiSn at concentrations 0 < x ≤ 0.05 is caused by the preferential partial substitution of Zr atoms (rZr = 0.1602 nm) by Nb atoms (rNb = 0.1468 nm), and the increase in the lattice parameter a(x) at x > 0.05 is caused by the preferential occupation of tetrahedral voids of the structure by Nb atoms. Structural transformations of n-Zr1-xNbxNiSn generate two types of defects of donor nature and the corresponding energy states of the band gap εg, which meet the condition for obtaining the maximum efficiency of converting thermal energy into electrical energy. It is shown that the n-Zr1-xNbxNiSn semiconductor is a promising thermoelectric material.
- 31 March 2026
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 1
Open AccessResearch on a New Semiconductor Thermoelectric Material n-Zr1-xNbxNiSn. I. Experimental Results
The structural, electrokinetic, energetic, and magnetic properties of the new semiconductor thermoelectric material n-Zr1-xNbxNiSn, х = 0–0.07, obtained by doping n-ZrNiSn with Nb atoms (4d45s1) by replacing Zr atoms (4d25s2) were investigated. The nature of the generated energy states and mechanisms of electrical conductivity were established. It was shown that in the n-Zr1-xNbxNiSn structure, there is a simultaneous substitution of Zr atoms by Nb atoms in different ratios, as well as the occupation of tetrahedral voids of the structure by Nb atoms. The decrease in the unit cell parameter a(x) of n-Zr1-xNbxNiSn at concentrations 0 < x ≤ 0.05 is caused by the preferential partial substitution of Zr atoms (rZr = 0.1602 nm) by Nb atoms (rNb = 0.1468 nm), and the increase in the lattice parameter a(x) at x > 0.05 is caused by the preferential occupation of tetrahedral voids of the structure by Nb atoms. Structural transformations of n-Zr1-xNbxNiSn generate two types of defects of donor nature and the corresponding energy states of the band gap εg, which meet the condition for obtaining the maximum efficiency of converting thermal energy into electrical energy. It is shown that the n-Zr1-xNbxNiSn semiconductor is a promising thermoelectric material.
- Open Access
- 5 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (17) , 7161-7169
Enhanced exciton luminescence and fast scintillation potential in Sr 2+ -activated CsPbCl 3 single crystals
Fast scintillator potential of Sr 2+ -activated CsPbCl 3 single crystals: tenfold excitonic luminescence enhancement and ultrashort ∼0.2 ns decay times.
- 5 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (17) , 7161-7169
Open AccessEnhanced exciton luminescence and fast scintillation potential in Sr 2+ -activated CsPbCl 3 single crystals
Fast scintillator potential of Sr 2+ -activated CsPbCl 3 single crystals: tenfold excitonic luminescence enhancement and ultrashort ∼0.2 ns decay times.
- Open Access
- 11 February 2026
- Published by Elsevier in SSRN Electronic Journal
Synthesis and characterization of novel clinoptilolite composite doped with silver (Ag⁺) and copper (Cu²⁺) cations and assessment of its disinfecting potential towards laboratory and pathogenic strains of Staphylococcus aureus and Pseudomonas aeruginosa
A series of composites Transcarpathian clinoptilolite - Metn+ (Metn+ = Ag+, Cu2+) was synthesized by mechanochemical treatment of natural clinoptilolite (CL) and nitrate salts in various media or by extraction from solution (with subsequent milling). The characteristics of the composites were analyzed through different techniques (XRD, SEM, EDX, FTIR, UV-Vis, XPS, atomic absorption spectroscopy, particle size distribution, study of porous structure, isoterm adsorption-desorption). The resulting composites consists of clinoptilolite of varying degrees of amorphization, alpha-quartz, and silver or copper (partly in the form of Cu2(OH)3(NO3). After ion-exchange introduction of cations into CL structure and particle milling, formation of macropores sized >50 nm was observed.,It was firstly demonstrated the antimicrobial effect of the created CL composites towards various contaminated surfaces, including metal, wood, stone, glass, and teflon, that represent real-world civilian and military environments. It was detected that Ag⁺- and Cu²⁺- doped formulations possessed the highest antibacterial activity even under big microbial load and towards clinical strains of bacteria. It should be noted that Ag⁺- doped composites exhibited stronger bactericidal effects than Cu²⁺-doped composites, however, the last ones provide a cost-effective alternative with a sufficient efficacy. Cytotoxicity assays of the created composites revealed good biocompatibility towards mammalian cells. The findings of this study demonstrated high potential of metal-doped CL, as an effective, safe, and sustainable surface disinfectant, especially in resource-limited or high-risk settings.
- 11 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSynthesis and characterization of novel clinoptilolite composite doped with silver (Ag⁺) and copper (Cu²⁺) cations and assessment of its disinfecting potential towards laboratory and pathogenic strains of Staphylococcus aureus and Pseudomonas aeruginosa
A series of composites Transcarpathian clinoptilolite - Metn+ (Metn+ = Ag+, Cu2+) was synthesized by mechanochemical treatment of natural clinoptilolite (CL) and nitrate salts in various media or by extraction from solution (with subsequent milling). The characteristics of the composites were analyzed through different techniques (XRD, SEM, EDX, FTIR, UV-Vis, XPS, atomic absorption spectroscopy, particle size distribution, study of porous structure, isoterm adsorption-desorption). The resulting composites consists of clinoptilolite of varying degrees of amorphization, alpha-quartz, and silver or copper (partly in the form of Cu2(OH)3(NO3). After ion-exchange introduction of cations into CL structure and particle milling, formation of macropores sized >50 nm was observed.,It was firstly demonstrated the antimicrobial effect of the created CL composites towards various contaminated surfaces, including metal, wood, stone, glass, and teflon, that represent real-world civilian and military environments. It was detected that Ag⁺- and Cu²⁺- doped formulations possessed the highest antibacterial activity even under big microbial load and towards clinical strains of bacteria. It should be noted that Ag⁺- doped composites exhibited stronger bactericidal effects than Cu²⁺-doped composites, however, the last ones provide a cost-effective alternative with a sufficient efficacy. Cytotoxicity assays of the created composites revealed good biocompatibility towards mammalian cells. The findings of this study demonstrated high potential of metal-doped CL, as an effective, safe, and sustainable surface disinfectant, especially in resource-limited or high-risk settings.
- 1 January 2026
- Published by Lviv Polytechnic National University in Measuring Equipment and Metrology
- Vol. 87 (1) , 13-18
RESEARCH OF SENSITIVE ELEMENTS OF THERMOELECTRIC CONVERTERS BASED ON Ti1-xNbxNiSn1-ySby
The results of modeling and experimental studies of the properties of the thermometric material Ti1-xNbxNiSn1-ySby, as well as the conversion functions of the sensitive elements of a thermoelectric thermometer based on it at temperatures of 4.2–1300 K, are presented. The modeling and experimental studies of the structural, electrokinetic and energy properties of the thermometric material Ti1-xNbxNiSn1-ySby for the case of an ordered variant of its crystal structure showed that at all concentrations of Sb atoms in the semiconductor, donor states are generated that compensate for the formed acceptor states, which makes the properties of the material stable and predictable. The dependence between the spatial arrangement of atoms in the units of the unit cell (crystal structure) of the thermometric material Ti1-xNbxNiSn1-ySby and the mechanisms of electrical conductivity is established, which allows us to determine the conditions for the synthesis of materials with maximum efficiency of converting thermal energy into electrical energy. It is shown that the investigated thermometric material Ti1-xNbxNiSn1-ySby is promising for the manufacture of sensitive elements of thermoelectric thermometers. The regularities of the transformation functions of the thermoelectric pair Ti0.98Nb0.02NiSn0.98Sb0.02-(Pt-Rh)13, the thermoelectrodes of which are made of the investigated thermometric material and platinoid (PR13) (positive branch), are investigated.
- 1 January 2026
- Published by Lviv Polytechnic National University in Measuring Equipment and Metrology
- Vol. 87 (1) , 13-18
RESEARCH OF SENSITIVE ELEMENTS OF THERMOELECTRIC CONVERTERS BASED ON Ti1-xNbxNiSn1-ySby
The results of modeling and experimental studies of the properties of the thermometric material Ti1-xNbxNiSn1-ySby, as well as the conversion functions of the sensitive elements of a thermoelectric thermometer based on it at temperatures of 4.2–1300 K, are presented. The modeling and experimental studies of the structural, electrokinetic and energy properties of the thermometric material Ti1-xNbxNiSn1-ySby for the case of an ordered variant of its crystal structure showed that at all concentrations of Sb atoms in the semiconductor, donor states are generated that compensate for the formed acceptor states, which makes the properties of the material stable and predictable. The dependence between the spatial arrangement of atoms in the units of the unit cell (crystal structure) of the thermometric material Ti1-xNbxNiSn1-ySby and the mechanisms of electrical conductivity is established, which allows us to determine the conditions for the synthesis of materials with maximum efficiency of converting thermal energy into electrical energy. It is shown that the investigated thermometric material Ti1-xNbxNiSn1-ySby is promising for the manufacture of sensitive elements of thermoelectric thermometers. The regularities of the transformation functions of the thermoelectric pair Ti0.98Nb0.02NiSn0.98Sb0.02-(Pt-Rh)13, the thermoelectrodes of which are made of the investigated thermometric material and platinoid (PR13) (positive branch), are investigated.
- Open Access
- 25 February 2025
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 651 (5)
Ternary Gallide Hf7Pd7Ga3: Crystal and Electronic Structures
Hf7Pd7Ga3 has been obtained by arc melting the elements under argon atmosphere. The crystal structure of the new compound has been determined from single‐crystal X‐ray diffraction data, while powder X‐ray diffraction has been applied for the characterization of polycrystalline samples. Hf7Pd7Ga3 (oS68, Cmce, a = 12.948(4), b = 9.585(3), c = 9.581(3) Å, Z = 4) crystallizes with a ternary version of the Zr7Ni10 type of structure exhibiting a statistical mixture of palladium and gallium atoms on three crystallographically independent nickel sites. The crystal structure of Hf7Pd7Ga3 features a Pd–Ga framework built of sinusoidal layers of Pd and Ga, which stack along the b axis sandwiching the Hf atoms. Density functional theory calculations for Hf7Pd7Ga3 in an idealized, ordered structure and, for comparison, hypothetical Hf7Pd10 reveal that partial substitution of Pd by Ga helps to alleviate the strong Pd–Pd antibonding interactions observed in Ga‐free Hf7Pd10.
- 25 February 2025
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 651 (5)
Open AccessTernary Gallide Hf7Pd7Ga3: Crystal and Electronic Structures
Hf7Pd7Ga3 has been obtained by arc melting the elements under argon atmosphere. The crystal structure of the new compound has been determined from single‐crystal X‐ray diffraction data, while powder X‐ray diffraction has been applied for the characterization of polycrystalline samples. Hf7Pd7Ga3 (oS68, Cmce, a = 12.948(4), b = 9.585(3), c = 9.581(3) Å, Z = 4) crystallizes with a ternary version of the Zr7Ni10 type of structure exhibiting a statistical mixture of palladium and gallium atoms on three crystallographically independent nickel sites. The crystal structure of Hf7Pd7Ga3 features a Pd–Ga framework built of sinusoidal layers of Pd and Ga, which stack along the b axis sandwiching the Hf atoms. Density functional theory calculations for Hf7Pd7Ga3 in an idealized, ordered structure and, for comparison, hypothetical Hf7Pd10 reveal that partial substitution of Pd by Ga helps to alleviate the strong Pd–Pd antibonding interactions observed in Ga‐free Hf7Pd10.
- Open Access
- 1 June 2024
- Published by Ivan Franko National University of Lviv in Studia Biologica
- Vol. 18 (2) , 3-19
Study of antibacterial effects of Transcarpathian clinoptilolite compositions modified in different chemical ways
Background. Natural clinoptilolite (CL) meets most of the requirements for the multifunctional mineral nanomaterials. It is considered biologically neutral and non-toxic. CL is the only representative of natural zeolites that has been approved for use in medical practice and food industry. Antibacterial activity of Transcarpathian clinoptilolite was shown to be enhanced via its modification using thermal, chemical and mechanochemical treatments. The natural form of this mineral contains a significant concentration of surface silanol (-OH) groups. An increase in the efficiency of zeolite-based materials in terms of biological activity can be achieved by means of thermal and chemical treatments, replacement of cations in the exchange complex, doping with heavy metal cations, or mechanochemical treatment. Materials and Methods. FTIR spectroscopy, Electronic spectroscopy, Particle size distribution, IR spectroscopy, Crystal structure and morphology, Measurement of antibacterial activity. Results. Intact and thermally modified CL was shown to exhibit weak antibacterial effect, while its mechanical modification led to an enhanced activity. It was established that H-form of clinoptilolite demonstrated higher efficiency in inhibiting the growth of Gram-positive bacteria, compared to the Na-form of the clinoptilolite, but their effect on growth of Gram-negative bacteria was insignificant. Such an activity was accompanied by an increase in the specific surface area and porosity that promoted better contact with bacteria. Conclusions: Different samples of CL had dissimilar effect on specific types of bacteria. Intact CL has a weak antibacterial activity of inhibiting growth of microorganisms, while thermal, chemical, and mechanical modifications of the CL structure differentially increased such an activity. The H-form of CL inhibited the growth of Gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis) more effectively compared to the Na-form of CL. However, H-form of CL has a weak effect on growth of the Gram-negative bacteria (Pseudomonas aeruginosa, Pseudomonas fluorescens).
- 1 June 2024
- Published by Ivan Franko National University of Lviv in Studia Biologica
- Vol. 18 (2) , 3-19
Open AccessStudy of antibacterial effects of Transcarpathian clinoptilolite compositions modified in different chemical ways
Background. Natural clinoptilolite (CL) meets most of the requirements for the multifunctional mineral nanomaterials. It is considered biologically neutral and non-toxic. CL is the only representative of natural zeolites that has been approved for use in medical practice and food industry. Antibacterial activity of Transcarpathian clinoptilolite was shown to be enhanced via its modification using thermal, chemical and mechanochemical treatments. The natural form of this mineral contains a significant concentration of surface silanol (-OH) groups. An increase in the efficiency of zeolite-based materials in terms of biological activity can be achieved by means of thermal and chemical treatments, replacement of cations in the exchange complex, doping with heavy metal cations, or mechanochemical treatment. Materials and Methods. FTIR spectroscopy, Electronic spectroscopy, Particle size distribution, IR spectroscopy, Crystal structure and morphology, Measurement of antibacterial activity. Results. Intact and thermally modified CL was shown to exhibit weak antibacterial effect, while its mechanical modification led to an enhanced activity. It was established that H-form of clinoptilolite demonstrated higher efficiency in inhibiting the growth of Gram-positive bacteria, compared to the Na-form of the clinoptilolite, but their effect on growth of Gram-negative bacteria was insignificant. Such an activity was accompanied by an increase in the specific surface area and porosity that promoted better contact with bacteria. Conclusions: Different samples of CL had dissimilar effect on specific types of bacteria. Intact CL has a weak antibacterial activity of inhibiting growth of microorganisms, while thermal, chemical, and mechanical modifications of the CL structure differentially increased such an activity. The H-form of CL inhibited the growth of Gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis) more effectively compared to the Na-form of CL. However, H-form of CL has a weak effect on growth of the Gram-negative bacteria (Pseudomonas aeruginosa, Pseudomonas fluorescens).