Beatriz Santiago González
Beatriz Santiago González has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
- Sergio Brovelli
Università degli Studi di Milano-Bicocca
5 shared publications - Carlo Santambrogio
Department of Biotechnology and Biosciences, University of Milano-Bicocca, Milan, Italy
4 shared publications Francesco Meinardi
Univ Milano Bicocca, Dipartimento Sci Mat, I-20125 Milan, Italy
4 shared publications- Manuel Arturo López Quintela
Department of Physical Chemistry & iMATUS Universidad de Santiago de Compostela Santiago de Compostela Spain
4 shared publications - Mirko Prato
Istituto Italiano di Tecnologia
4 shared publications - Marcello Campione
University of Milano - Bicocca
3 shared publications
Latest Publications
- 21 January 2019
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 19 (2) , 1307-1317
Quantized Electronic Doping towards Atomically Controlled “Charge-Engineered” Semiconductor Nanocrystals
"Charge engineering" of semiconductor nanocrystals (NCs) through so-called electronic impurity doping is a long-standing challenge in colloidal chemistry and holds promise for ground-breaking advancements in many optoelectronic, photonic, and spin-based nanotechnologies. To date, our knowledge is limited to a few paradigmatic studies on a small number of model compounds and doping conditions, with important electronic dopants still unexplored in nanoscale systems. Equally importantly, fine-tuning of charge engineered NCs is hampered by the statistical limitations of traditional approaches. The resulting intrinsic doping inhomogeneity restricts fundamental studies to statistically averaged behaviors and complicates the realization of advanced device concepts based on their advantageous functionalities. Here we aim to address these issues by realizing the first example of II-VI NCs electronically doped with an exact number of heterovalent gold atoms, a known p-type acceptor impurity in bulk chalcogenides. Single-dopant accuracy across entire NC ensembles is obtained through a novel non-injection synthesis employing ligand-exchanged gold clusters as "quantized" dopant sources to seed the nucleation of CdSe NCs in organic media. Structural, spectroscopic, and magneto-optical investigations trace a comprehensive picture of the physical processes resulting from the exact doping level of the NCs. Gold atoms, doped here for the first time into II-VI NCs, are found to incorporate as nonmagnetic Au+ species activating intense size-tunable intragap photoluminescence and artificially offsetting the hole occupancy of valence band states. Fundamentally, the transient conversion of Au+ to paramagnetic Au2+ (5d(9) configuration) under optical excitation results in strong photoinduced magnetism and diluted magnetic semiconductor behavior revealing the contribution of individual paramagnetic impurities to the macroscopic magnetism of the NCs. Altogether, our results demonstrate a new chemical approach toward NCs with physical functionalities tailored to the single impurity level and offer a versatile platform for future investigations and device exploitation of individual and collective impurity processes in quantum confined structures.
- 21 January 2019
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 19 (2) , 1307-1317
Quantized Electronic Doping towards Atomically Controlled “Charge-Engineered” Semiconductor Nanocrystals
"Charge engineering" of semiconductor nanocrystals (NCs) through so-called electronic impurity doping is a long-standing challenge in colloidal chemistry and holds promise for ground-breaking advancements in many optoelectronic, photonic, and spin-based nanotechnologies. To date, our knowledge is limited to a few paradigmatic studies on a small number of model compounds and doping conditions, with important electronic dopants still unexplored in nanoscale systems. Equally importantly, fine-tuning of charge engineered NCs is hampered by the statistical limitations of traditional approaches. The resulting intrinsic doping inhomogeneity restricts fundamental studies to statistically averaged behaviors and complicates the realization of advanced device concepts based on their advantageous functionalities. Here we aim to address these issues by realizing the first example of II-VI NCs electronically doped with an exact number of heterovalent gold atoms, a known p-type acceptor impurity in bulk chalcogenides. Single-dopant accuracy across entire NC ensembles is obtained through a novel non-injection synthesis employing ligand-exchanged gold clusters as "quantized" dopant sources to seed the nucleation of CdSe NCs in organic media. Structural, spectroscopic, and magneto-optical investigations trace a comprehensive picture of the physical processes resulting from the exact doping level of the NCs. Gold atoms, doped here for the first time into II-VI NCs, are found to incorporate as nonmagnetic Au+ species activating intense size-tunable intragap photoluminescence and artificially offsetting the hole occupancy of valence band states. Fundamentally, the transient conversion of Au+ to paramagnetic Au2+ (5d(9) configuration) under optical excitation results in strong photoinduced magnetism and diluted magnetic semiconductor behavior revealing the contribution of individual paramagnetic impurities to the macroscopic magnetism of the NCs. Altogether, our results demonstrate a new chemical approach toward NCs with physical functionalities tailored to the single impurity level and offer a versatile platform for future investigations and device exploitation of individual and collective impurity processes in quantum confined structures.
- 12 March 2018
- Published by Wiley in Advanced Functional Materials
- Vol. 28 (19)
Self‐Assembled pH‐Sensitive Fluoromagnetic Nanotubes as Archetype System for Multimodal Imaging of Brain Cancer
Fluoromagnetic systems are recognized as an emerging class of materials with great potential in the biomedical field. Here, it is shown how to fabricate fluoromagnetic nanotubes that can serve as multimodal probes for the imaging and targeting of brain cancer. An ionic self‐assembly strategy is used to functionalize the surface of synthetic chrysotile nanotubes with pH‐sensitive fluorescent chromophores and ferromagnetic nanoparticles. The acquired magnetic properties permit their use as contrast agent for magnetic resonance imaging, and enable the tracking of tumor cell migration and infiltration responsible for metastatic growth and disease recurrence. Their organic component, changing its fluorescence attitude as a function of local pH, targets the cancer distinctive acidity, and allows localizing and monitoring the tumor occurrence and progression by mapping the acidic spatial distribution within biopsy tissues. The fluoromagnetic properties of nanotubes are preserved from the in vitro to the in vivo condition and they show the ability to migrate across the blood brain barrier, thus spontaneously reaching the brain tumor after injection. The simplicity of the synthesis route of these geomimetic nanomaterials combined with their demonstrated affinity with the in vivo condition strongly highlights their potential for developing effective functional materials for multimodal theranostics of brain cancer.
- 12 March 2018
- Published by Wiley in Advanced Functional Materials
- Vol. 28 (19)
Self‐Assembled pH‐Sensitive Fluoromagnetic Nanotubes as Archetype System for Multimodal Imaging of Brain Cancer
Fluoromagnetic systems are recognized as an emerging class of materials with great potential in the biomedical field. Here, it is shown how to fabricate fluoromagnetic nanotubes that can serve as multimodal probes for the imaging and targeting of brain cancer. An ionic self‐assembly strategy is used to functionalize the surface of synthetic chrysotile nanotubes with pH‐sensitive fluorescent chromophores and ferromagnetic nanoparticles. The acquired magnetic properties permit their use as contrast agent for magnetic resonance imaging, and enable the tracking of tumor cell migration and infiltration responsible for metastatic growth and disease recurrence. Their organic component, changing its fluorescence attitude as a function of local pH, targets the cancer distinctive acidity, and allows localizing and monitoring the tumor occurrence and progression by mapping the acidic spatial distribution within biopsy tissues. The fluoromagnetic properties of nanotubes are preserved from the in vitro to the in vivo condition and they show the ability to migrate across the blood brain barrier, thus spontaneously reaching the brain tumor after injection. The simplicity of the synthesis route of these geomimetic nanomaterials combined with their demonstrated affinity with the in vivo condition strongly highlights their potential for developing effective functional materials for multimodal theranostics of brain cancer.
- 1 January 2018
- Published by Elsevier
- p. 32-37
Composite Functional Nanomaterials Assembled via Electrostatic Interactions of Inorganic Surfaces and Organic Molecules
- 1 January 2018
- Published by Elsevier
- p. 32-37
Composite Functional Nanomaterials Assembled via Electrostatic Interactions of Inorganic Surfaces and Organic Molecules
- Open Access
- 20 July 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 5976
Metal Nanoclusters with Synergistically Engineered Optical and Buffering Activity of Intracellular Reactive Oxygen Species by Compositional and Supramolecular Design
Metal nanoclusters featuring tunable luminescence and high biocompatibility are receiving attention as fluorescent markers for cellular imaging. The recently discovered ability of gold clusters to scavenge cytotoxic reactive oxygen species (ROS) from the intracellular environment extends their applicability to biomedical theranostics and provides a novel platform for realizing multifunctional luminescent probes with engineered anti-cytotoxic activity for applications in bio-diagnostics and conceivably cellular therapy. This goal could be achieved by using clusters of strongly reactive metals such as silver, provided that strategies are found to enhance their luminescence while simultaneously enabling direct interaction between the metal atoms and the chemical surroundings. In this work, we demonstrate a synergic approach for realizing multifunctional metal clusters combining enhanced luminescence with strong and lasting ROS scavenging activity, based on the fabrication and in situ protection of Ag nanoclusters with a supramolecular mantle of thiolated-Au atoms (Ag/Au-t). Confocal imaging and viability measurements highlight the biocompatibility of Ag/Au-t and their suitability as fluorescent bio-markers. ROS concentration tests reveal the remarkable scavenging activity of Ag-based clusters. Proliferation tests of cells in artificially stressed culture conditions point out their prolonged anti-cytotoxic effect with respect to gold systems, ensuring positive cell proliferation rates even for long incubation time.
- 20 July 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 5976
Open AccessMetal Nanoclusters with Synergistically Engineered Optical and Buffering Activity of Intracellular Reactive Oxygen Species by Compositional and Supramolecular Design
Metal nanoclusters featuring tunable luminescence and high biocompatibility are receiving attention as fluorescent markers for cellular imaging. The recently discovered ability of gold clusters to scavenge cytotoxic reactive oxygen species (ROS) from the intracellular environment extends their applicability to biomedical theranostics and provides a novel platform for realizing multifunctional luminescent probes with engineered anti-cytotoxic activity for applications in bio-diagnostics and conceivably cellular therapy. This goal could be achieved by using clusters of strongly reactive metals such as silver, provided that strategies are found to enhance their luminescence while simultaneously enabling direct interaction between the metal atoms and the chemical surroundings. In this work, we demonstrate a synergic approach for realizing multifunctional metal clusters combining enhanced luminescence with strong and lasting ROS scavenging activity, based on the fabrication and in situ protection of Ag nanoclusters with a supramolecular mantle of thiolated-Au atoms (Ag/Au-t). Confocal imaging and viability measurements highlight the biocompatibility of Ag/Au-t and their suitability as fluorescent bio-markers. ROS concentration tests reveal the remarkable scavenging activity of Ag-based clusters. Proliferation tests of cells in artificially stressed culture conditions point out their prolonged anti-cytotoxic effect with respect to gold systems, ensuring positive cell proliferation rates even for long incubation time.
- 16 May 2017
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 11 (6) , 6233-6242
“Quantized” Doping of Individual Colloidal Nanocrystals Using Size-Focused Metal Quantum Clusters
The insertion of intentional impurities, commonly referred to as doping, into colloidal semiconductor quantum dots (QDs) is a powerful paradigm for tailoring their electronic, optical, and magnetic behaviors beyond what is obtained with size-control and heterostructuring motifs. Advancements in colloidal chemistry have led to nearly atomic precision of the doping level in both lightly and heavily doped QDs. The doping strategies currently available, however, operate at the ensemble level, resulting in a Poisson distribution of impurities across the QD population. To date, the synthesis of monodisperse ensembles of QDs individually doped with an identical number of impurity atoms is still an open challenge, and its achievement would enable the realization of advanced QD devices, such as optically/electrically controlled magnetic memories and intragap state transistors and solar cells, that rely on the precise tuning of the impurity states (i.e., number of unpaired spins, energy and width of impurity levels) within the QD host. The only approach reported to date relies on QD seeding with organometallic precursors that are intrinsically unstable and strongly affected by chemical or environmental degradation, which prevents the concept from reaching its full potential and makes the method unsuitable for aqueous synthesis routes. Here, we overcome these issues by demonstrating a doping strategy that bridges two traditionally orthogonal nanostructured material systems, namely, QDs and metal quantum clusters composed of a “magic number” of atoms held together by stable metal-to-metal bonds. Specifically, we use clusters composed of four copper atoms (Cu4) capped with d-penicillamine to seed the growth of CdS QDs in water at room temperature. The elemental analysis, performed by electrospray ionization mass spectrometry, X-ray fluorescence, and inductively coupled plasma mass spectrometry, side by side with optical spectroscopy and transmission electron microscopy measurements, indicates that each Cu:CdS QD in the ensemble incorporates four Cu atoms originating from one Cu4 cluster, which acts as a “quantized” source of dopant impurities.
- 16 May 2017
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 11 (6) , 6233-6242
“Quantized” Doping of Individual Colloidal Nanocrystals Using Size-Focused Metal Quantum Clusters
The insertion of intentional impurities, commonly referred to as doping, into colloidal semiconductor quantum dots (QDs) is a powerful paradigm for tailoring their electronic, optical, and magnetic behaviors beyond what is obtained with size-control and heterostructuring motifs. Advancements in colloidal chemistry have led to nearly atomic precision of the doping level in both lightly and heavily doped QDs. The doping strategies currently available, however, operate at the ensemble level, resulting in a Poisson distribution of impurities across the QD population. To date, the synthesis of monodisperse ensembles of QDs individually doped with an identical number of impurity atoms is still an open challenge, and its achievement would enable the realization of advanced QD devices, such as optically/electrically controlled magnetic memories and intragap state transistors and solar cells, that rely on the precise tuning of the impurity states (i.e., number of unpaired spins, energy and width of impurity levels) within the QD host. The only approach reported to date relies on QD seeding with organometallic precursors that are intrinsically unstable and strongly affected by chemical or environmental degradation, which prevents the concept from reaching its full potential and makes the method unsuitable for aqueous synthesis routes. Here, we overcome these issues by demonstrating a doping strategy that bridges two traditionally orthogonal nanostructured material systems, namely, QDs and metal quantum clusters composed of a “magic number” of atoms held together by stable metal-to-metal bonds. Specifically, we use clusters composed of four copper atoms (Cu4) capped with d-penicillamine to seed the growth of CdS QDs in water at room temperature. The elemental analysis, performed by electrospray ionization mass spectrometry, X-ray fluorescence, and inductively coupled plasma mass spectrometry, side by side with optical spectroscopy and transmission electron microscopy measurements, indicates that each Cu:CdS QD in the ensemble incorporates four Cu atoms originating from one Cu4 cluster, which acts as a “quantized” source of dopant impurities.
- 6 February 2017
- Published by Wiley in Advanced Functional Materials
- Vol. 27 (12)
Two‐Color Emitting Colloidal Nanocrystals as Single‐Particle Ratiometric Probes of Intracellular pH
Intracellular pH is a key parameter in many biological mechanisms and cell metabolism and is used to detect and monitor cancer formation and brain or heart diseases. pH‐sensing is typically performed by fluorescence microscopy using pH‐responsive dyes. Accuracy is limited by the need for quantifying the absolute emission intensity in living biological samples. An alternative with a higher sensitivity and precision uses probes with a ratiometric response arising from the different pH‐sensitivity of two emission channels of a single emitter. Current ratiometric probes are complex constructs suffering from instability and cross‐readout due to their broad emission spectra. Here, we overcome such limitations using a single‐particle ratiometric pH probe based on dot‐in‐bulk CdSe/CdS nanocrystals (NCs). These nanostructures feature two fully‐separated narrow emissions with different pH sensitivity arising from radiative recombination of core‐ and shell‐localized excitons. The core emission is nearly independent of the pH, whereas the shell luminescence increases in the 3–11 pH range, resulting in a cross‐readout‐free ratiometric response as strong as 600%. In vitro microscopy demonstrates that the ratiometric response in biologic media resembles the precalibralation curve obtained through far‐field titration experiments. The NCs show good biocompatibility, enabling us to monitor in real‐time the pH in living cells.
- 6 February 2017
- Published by Wiley in Advanced Functional Materials
- Vol. 27 (12)
Two‐Color Emitting Colloidal Nanocrystals as Single‐Particle Ratiometric Probes of Intracellular pH
Intracellular pH is a key parameter in many biological mechanisms and cell metabolism and is used to detect and monitor cancer formation and brain or heart diseases. pH‐sensing is typically performed by fluorescence microscopy using pH‐responsive dyes. Accuracy is limited by the need for quantifying the absolute emission intensity in living biological samples. An alternative with a higher sensitivity and precision uses probes with a ratiometric response arising from the different pH‐sensitivity of two emission channels of a single emitter. Current ratiometric probes are complex constructs suffering from instability and cross‐readout due to their broad emission spectra. Here, we overcome such limitations using a single‐particle ratiometric pH probe based on dot‐in‐bulk CdSe/CdS nanocrystals (NCs). These nanostructures feature two fully‐separated narrow emissions with different pH sensitivity arising from radiative recombination of core‐ and shell‐localized excitons. The core emission is nearly independent of the pH, whereas the shell luminescence increases in the 3–11 pH range, resulting in a cross‐readout‐free ratiometric response as strong as 600%. In vitro microscopy demonstrates that the ratiometric response in biologic media resembles the precalibralation curve obtained through far‐field titration experiments. The NCs show good biocompatibility, enabling us to monitor in real‐time the pH in living cells.
- 5 August 2016
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 353 (6299) , 571-575
Permanent excimer superstructures by supramolecular networking of metal quantum clusters
Long-life excimer-like structures: Metal quantum clusters have ideal properties for medical applications such as imaging. The challenge is to prolong their transient properties for the fabrication of useful devices. Santiago-Gonzalez et al. arranged gold clusters in a supramolecular lattice held together by hydrogen bonding and showed that this material can be used for imaging of fibroblast cells. In the superstructure, the gold molecules can come together in the excited state as excimers and then dissociate to emit radiation. Because they are within a lattice, this behavior shows long-term stability. Furthermore, the lattice superstructure scavenges reactive oxygen species and reduces cell damage. Science , this issue p. 571
- 5 August 2016
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 353 (6299) , 571-575
Permanent excimer superstructures by supramolecular networking of metal quantum clusters
Long-life excimer-like structures: Metal quantum clusters have ideal properties for medical applications such as imaging. The challenge is to prolong their transient properties for the fabrication of useful devices. Santiago-Gonzalez et al. arranged gold clusters in a supramolecular lattice held together by hydrogen bonding and showed that this material can be used for imaging of fibroblast cells. In the superstructure, the gold molecules can come together in the excited state as excimers and then dissociate to emit radiation. Because they are within a lattice, this behavior shows long-term stability. Furthermore, the lattice superstructure scavenges reactive oxygen species and reduces cell damage. Science , this issue p. 571
- 2 August 2016
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 1 (2) , 454-463
Surface Polarization Drives Photoinduced Charge Separation at the P3HT/Water Interface
- 2 August 2016
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 1 (2) , 454-463
Surface Polarization Drives Photoinduced Charge Separation at the P3HT/Water Interface
- 1 October 2015
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 455, 154-162
Synthesis of water-soluble gold clusters in nanosomes displaying robust photoluminescence with very large Stokes shift
- 1 October 2015
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 455, 154-162
Synthesis of water-soluble gold clusters in nanosomes displaying robust photoluminescence with very large Stokes shift
- 14 August 2014
- Published by Royal Society of Chemistry (RSC)
- p. 25-50
CHAPTER 2. New Strategies and Synthetic Routes to Synthesize Fluorescent Atomic Quantum Clusters
Atomic quantum clusters (AQCs) of metals typically consist of several to tens of atoms, with sizes below 2 nm, comparable to the Fermi wavelength of electrons. Due to electron confinement and discrete energy levels, these clusters display “molecule-like” properties different from the corresponding bulk/nanoparticle materials. They possess high fluorescent efficiency, excellent photostability, particularly small size, and especially lower toxicity than quantum dots (QDs). Recent advances in synthetic methodologies allow metal quantum clusters protected with different ligands and scaffolds with tunable sizes and emission colors covering the visible spectrum to be obtained. Therefore, they appear to be promising fluorescent materials with a multitude of potential applications, especially in the life sciences.
- 14 August 2014
- Published by Royal Society of Chemistry (RSC)
- p. 25-50
CHAPTER 2. New Strategies and Synthetic Routes to Synthesize Fluorescent Atomic Quantum Clusters
Atomic quantum clusters (AQCs) of metals typically consist of several to tens of atoms, with sizes below 2 nm, comparable to the Fermi wavelength of electrons. Due to electron confinement and discrete energy levels, these clusters display “molecule-like” properties different from the corresponding bulk/nanoparticle materials. They possess high fluorescent efficiency, excellent photostability, particularly small size, and especially lower toxicity than quantum dots (QDs). Recent advances in synthetic methodologies allow metal quantum clusters protected with different ligands and scaffolds with tunable sizes and emission colors covering the visible spectrum to be obtained. Therefore, they appear to be promising fluorescent materials with a multitude of potential applications, especially in the life sciences.