Daniel Corzo
Daniel Corzo has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Derya Baran
King Abdullah University of Science and Technology (KAUST)
6 shared publications Diego Rosas‐Villalva
King Abdullah University of Science and Technology (KAUST) Division of Physical Science and Engineering KAUST Solar Center KAUST Thuwal 23955 Kingdom of Saudi Arabia
3 shared publicationsEmily Bezerra Alexandre
Physical Sciences and Engineering Division, KAUST Solar Center (KSC), King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia
2 shared publications- Sahika Inal
Organic Bioelectronics Laboratory, Biological and Environmental Science and Engineering Division, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
2 shared publications Amruth C
Physical Sciences and Engineering Division, KAUST Solar Center (KSC), King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia
1 shared publication- Aniruddha Basu
King Abdullah University of Science and Technology (KAUST) KAUST Solar Center (KSC) Thuwal 23955 Saudi Arabia
1 shared publication
Latest Publications
- Open Access
- 24 September 2026
- Published by Springer Nature in Communications Sustainability
- Vol. 1 (1) , 152
A circular approach to reduce, recover and recycle graphene-based printed electronics
The shift towards renewable materials and circular processes is crucial for sustainable printed electronics. Conventional conductive inks rely on petrochemical-based solvents and synthetic binders that hinder recyclability and recovery of high-value materials. Here, we report a recyclable graphene ink formulated with a bio-renewable terpene solvent and cellulose-based binder for electrochemical sensing applications. Using Hansen Solubility as ink formulation framework along the GlaxoSmithKline Solvent Sustainability Guide, we propose linalool as a low-toxicity dispersant alongside the ethyl cellulose binder to enable efficient graphene recovery. We fabricated fully printed electrochemical sensors for physiologically relevant analytes, including ascorbic and uric acid. The devices were subsequently disassembled, enabling recovery of the solvent, substrate, and over 93% of the graphene. Reclaimed materials were reused to fabricate sensors and heaters, with graphene recycled five times without compromising performance. The ink reduces global warming potential by up to 42% compared with conventional graphene inks and by over 59% after recycling, demonstrating a circular approach to sustainable graphene-based printed electronics.
- 24 September 2026
- Published by Springer Nature in Communications Sustainability
- Vol. 1 (1) , 152
Open AccessA circular approach to reduce, recover and recycle graphene-based printed electronics
The shift towards renewable materials and circular processes is crucial for sustainable printed electronics. Conventional conductive inks rely on petrochemical-based solvents and synthetic binders that hinder recyclability and recovery of high-value materials. Here, we report a recyclable graphene ink formulated with a bio-renewable terpene solvent and cellulose-based binder for electrochemical sensing applications. Using Hansen Solubility as ink formulation framework along the GlaxoSmithKline Solvent Sustainability Guide, we propose linalool as a low-toxicity dispersant alongside the ethyl cellulose binder to enable efficient graphene recovery. We fabricated fully printed electrochemical sensors for physiologically relevant analytes, including ascorbic and uric acid. The devices were subsequently disassembled, enabling recovery of the solvent, substrate, and over 93% of the graphene. Reclaimed materials were reused to fabricate sensors and heaters, with graphene recycled five times without compromising performance. The ink reduces global warming potential by up to 42% compared with conventional graphene inks and by over 59% after recycling, demonstrating a circular approach to sustainable graphene-based printed electronics.
- 13 March 2026
- Published by Springer Nature in Nature Materials
- Vol. 25 (5) , 725-736
Pathways to commercially viable organic photovoltaic materials
Organic photovoltaics (OPVs) are a pathway to sustainable energy solutions in various applications, but the challenge of developing materials that simultaneously fulfil stringent cost, efficiency and stability requirements has limited widespread adoption. Here we examine the critical factors shaping the transition of OPV materials from laboratory research to real-world deployment, focusing on materials design, scalable manufacturing and device reliability. Recent laboratory-scale proof-of-concept and prototype demonstrations have advanced the development of OPV materials with device efficiencies that exceed 21%, yet overcoming scale-up challenges remains essential for commercial viability. To facilitate this lab-to-fab transition, we discuss four key aspects that are expected to define the next decade of sustainable OPV: cost-effectiveness, green solvents for processing, stability and efficiency. By integrating these considerations, we highlight the advantages of OPV materials, including high power-to-weight ratios, intrinsic mechanical flexibility and tailored spectral selectivity for greenhouse agrivoltaics, to accelerate their commercialization.
- 13 March 2026
- Published by Springer Nature in Nature Materials
- Vol. 25 (5) , 725-736
Pathways to commercially viable organic photovoltaic materials
Organic photovoltaics (OPVs) are a pathway to sustainable energy solutions in various applications, but the challenge of developing materials that simultaneously fulfil stringent cost, efficiency and stability requirements has limited widespread adoption. Here we examine the critical factors shaping the transition of OPV materials from laboratory research to real-world deployment, focusing on materials design, scalable manufacturing and device reliability. Recent laboratory-scale proof-of-concept and prototype demonstrations have advanced the development of OPV materials with device efficiencies that exceed 21%, yet overcoming scale-up challenges remains essential for commercial viability. To facilitate this lab-to-fab transition, we discuss four key aspects that are expected to define the next decade of sustainable OPV: cost-effectiveness, green solvents for processing, stability and efficiency. By integrating these considerations, we highlight the advantages of OPV materials, including high power-to-weight ratios, intrinsic mechanical flexibility and tailored spectral selectivity for greenhouse agrivoltaics, to accelerate their commercialization.
- Open Access
- 15 December 2022
- Published by Springer Nature in Nature Energy
- Vol. 8 (1) , 62-73
High-performing organic electronics using terpene green solvents from renewable feedstocks
Accelerating the shift towards renewable materials and sustainable processes for printed organic electronic devices is crucial for a green circular economy. Currently, the fabrication of organic devices with competitive performances is linked to toxic petrochemical-based solvents with considerable carbon emissions. Here we show that terpene solvents obtained from renewable feedstocks can replace non-renewable environmentally hazardous solvent counterparts in the production of highly efficient organic photovoltaics (OPVs) light-emitting diodes (OLEDs) and field-effect transistors (OFETs) with on-par performances. Using a Hansen solubility ink formulation framework, we identify various terpene solvent systems and investigate effective film formation and drying mechanisms required for optimal charge transport. This approach is universal for state-of-the-art materials in OPVs, OLEDs and OFETs. We created an interactive library for green solvent selections and made it publicly available through the OMEGALab website. As potential carbon-negative solvents, terpenes open a unique and universal approach towards efficient, large-area and stable organic electronic devices.
- 15 December 2022
- Published by Springer Nature in Nature Energy
- Vol. 8 (1) , 62-73
Open AccessHigh-performing organic electronics using terpene green solvents from renewable feedstocks
Accelerating the shift towards renewable materials and sustainable processes for printed organic electronic devices is crucial for a green circular economy. Currently, the fabrication of organic devices with competitive performances is linked to toxic petrochemical-based solvents with considerable carbon emissions. Here we show that terpene solvents obtained from renewable feedstocks can replace non-renewable environmentally hazardous solvent counterparts in the production of highly efficient organic photovoltaics (OPVs) light-emitting diodes (OLEDs) and field-effect transistors (OFETs) with on-par performances. Using a Hansen solubility ink formulation framework, we identify various terpene solvent systems and investigate effective film formation and drying mechanisms required for optimal charge transport. This approach is universal for state-of-the-art materials in OPVs, OLEDs and OFETs. We created an interactive library for green solvent selections and made it publicly available through the OMEGALab website. As potential carbon-negative solvents, terpenes open a unique and universal approach towards efficient, large-area and stable organic electronic devices.
- 26 November 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (7)
Ink Engineering of Transport Layers for 9.5% Efficient All‐Printed Semitransparent Nonfullerene Solar Cells
New polymer donors and nonfullerene acceptors have elevated the performance and stability of solar cells to higher grounds. To achieve their full potential, they require their adaptation to scalable and cost‐effective solution manufacturing techniques for large area deposition. Likewise, formulating scalable solution‐based transport layer inks that are compatible with the photoactive layer is imperative. This manuscript reports the full integration of solution‐based transport layers and electrode alongside a PTB7‐Th:IEICO‐4F bulk heterojunction in inverted architecture through inkjet‐printing, resulting in power conversion efficiencies up to 12.4% opaque devices and 9.5% semitransparent devices with average visible transmittance values of 50.1%, including hole transport layer. The wetting envelope of the highly‐hydrophobic photoactive layer alongside the surface energy of candidate solutions and solvents allows the formulation of thick transport layer inks that are compatible with the drop‐on‐demand inkjet‐printing process and yield uniform and homogenous films. Moreover, the surface energy components of the donor and acceptor serves as a fingerprint to assess the vertical stratification of the photoactive layer with the inclusion of different solvents. This methodology addresses a scale‐up bottleneck of solution‐based transport layers for high‐efficiency organic cells, enabling its adaptation to high‐throughput techniques including slot‐die and roll‐to‐roll coating.
- 26 November 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (7)
Ink Engineering of Transport Layers for 9.5% Efficient All‐Printed Semitransparent Nonfullerene Solar Cells
New polymer donors and nonfullerene acceptors have elevated the performance and stability of solar cells to higher grounds. To achieve their full potential, they require their adaptation to scalable and cost‐effective solution manufacturing techniques for large area deposition. Likewise, formulating scalable solution‐based transport layer inks that are compatible with the photoactive layer is imperative. This manuscript reports the full integration of solution‐based transport layers and electrode alongside a PTB7‐Th:IEICO‐4F bulk heterojunction in inverted architecture through inkjet‐printing, resulting in power conversion efficiencies up to 12.4% opaque devices and 9.5% semitransparent devices with average visible transmittance values of 50.1%, including hole transport layer. The wetting envelope of the highly‐hydrophobic photoactive layer alongside the surface energy of candidate solutions and solvents allows the formulation of thick transport layer inks that are compatible with the drop‐on‐demand inkjet‐printing process and yield uniform and homogenous films. Moreover, the surface energy components of the donor and acceptor serves as a fingerprint to assess the vertical stratification of the photoactive layer with the inclusion of different solvents. This methodology addresses a scale‐up bottleneck of solution‐based transport layers for high‐efficiency organic cells, enabling its adaptation to high‐throughput techniques including slot‐die and roll‐to‐roll coating.
- 14 June 2020
- Published by Wiley in Advanced Materials Technologies
- Vol. 5 (8)
Fully Inkjet‐Printed, Ultrathin and Conformable Organic Photovoltaics as Power Source Based on Cross‐Linked PEDOT:PSS Electrodes
Ultra‐lightweight solar cells have attracted enormous attention due to their ultra‐conformability, flexibility, and compatibility with applications including electronic skin or miniaturized electronics for biological applications. With the latest advancements in printing technologies, printing ultrathin electronics is becoming now a reality. This work offers an easy path to fabricate indium tin oxide (ITO)‐free ultra‐lightweight organic solar cells through inkjet‐printing while preserving high efficiencies. A method consisting of the modification of a poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) ink with a methoxysilane‐based cross‐linker (3‐glycidyloxypropyl)trimethoxysilane (GOPS)) is presented to chemically modify the structure of the electrode layer. Combined with plasma and solvent post‐treatments, this approach prevents shunts and ensures precise patterning of solar cells. By using poly(3‐hexylthiophene) along rhodanine‐benzothiadiazole‐coupled indacenodithiophene (P3HT:O‐IDTBR), the power conversion efficiency (PCE) of the fully printed solar cells is boosted up to 4.73% and fill factors approaching 65%. All inkjet‐printed ultrathin solar cells on a 1.7 µm thick biocompatible parylene substrate are fabricated with PCE reaching up to 3.6% and high power‐per‐weight values of 6.3 W g−1. After encapsulation, the cells retain their performance after being exposed for 6 h to aqueous environments such as water, seawater, or phosphate buffered saline, paving the way for their integration in more complex circuits for biological systems.
- 14 June 2020
- Published by Wiley in Advanced Materials Technologies
- Vol. 5 (8)
Fully Inkjet‐Printed, Ultrathin and Conformable Organic Photovoltaics as Power Source Based on Cross‐Linked PEDOT:PSS Electrodes
Ultra‐lightweight solar cells have attracted enormous attention due to their ultra‐conformability, flexibility, and compatibility with applications including electronic skin or miniaturized electronics for biological applications. With the latest advancements in printing technologies, printing ultrathin electronics is becoming now a reality. This work offers an easy path to fabricate indium tin oxide (ITO)‐free ultra‐lightweight organic solar cells through inkjet‐printing while preserving high efficiencies. A method consisting of the modification of a poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) ink with a methoxysilane‐based cross‐linker (3‐glycidyloxypropyl)trimethoxysilane (GOPS)) is presented to chemically modify the structure of the electrode layer. Combined with plasma and solvent post‐treatments, this approach prevents shunts and ensures precise patterning of solar cells. By using poly(3‐hexylthiophene) along rhodanine‐benzothiadiazole‐coupled indacenodithiophene (P3HT:O‐IDTBR), the power conversion efficiency (PCE) of the fully printed solar cells is boosted up to 4.73% and fill factors approaching 65%. All inkjet‐printed ultrathin solar cells on a 1.7 µm thick biocompatible parylene substrate are fabricated with PCE reaching up to 3.6% and high power‐per‐weight values of 6.3 W g−1. After encapsulation, the cells retain their performance after being exposed for 6 h to aqueous environments such as water, seawater, or phosphate buffered saline, paving the way for their integration in more complex circuits for biological systems.
- Open Access
- 21 October 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (51)
Self‐Healing and Stretchable 3D‐Printed Organic Thermoelectrics
With the advent of flexible and wearable electronics and sensors, there is an urgent need to develop energy‐harvesting solutions that are compatible with such wearables. However, many of the proposed energy‐harvesting solutions lack the necessary mechanical properties, which make them susceptible to damage by repetitive and continuous mechanical stresses, leading to serious degradation in device performance. Developing new energy materials that possess high deformability and self‐healability is essential to realize self‐powered devices. Herein, a thermoelectric ternary composite is demonstrated that possesses both self‐healing and stretchable properties produced via 3D‐printing method. The ternary composite films provide stable thermoelectric performance during viscoelastic deformation, up to 35% tensile strain. Importantly, after being completely severed by cutting, the composite films autonomously recover their thermoelectric properties with a rapid response time of around one second. Using this self‐healable and solution‐processable composite, 3D‐printed thermoelectric generators are fabricated, which retain above 85% of their initial power output, even after repetitive cutting and self‐healing. This approach represents a significant step in achieving damage‐free and truly wearable 3D‐printed organic thermoelectrics.
- 21 October 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (51)
Open AccessSelf‐Healing and Stretchable 3D‐Printed Organic Thermoelectrics
With the advent of flexible and wearable electronics and sensors, there is an urgent need to develop energy‐harvesting solutions that are compatible with such wearables. However, many of the proposed energy‐harvesting solutions lack the necessary mechanical properties, which make them susceptible to damage by repetitive and continuous mechanical stresses, leading to serious degradation in device performance. Developing new energy materials that possess high deformability and self‐healability is essential to realize self‐powered devices. Herein, a thermoelectric ternary composite is demonstrated that possesses both self‐healing and stretchable properties produced via 3D‐printing method. The ternary composite films provide stable thermoelectric performance during viscoelastic deformation, up to 35% tensile strain. Importantly, after being completely severed by cutting, the composite films autonomously recover their thermoelectric properties with a rapid response time of around one second. Using this self‐healable and solution‐processable composite, 3D‐printed thermoelectric generators are fabricated, which retain above 85% of their initial power output, even after repetitive cutting and self‐healing. This approach represents a significant step in achieving damage‐free and truly wearable 3D‐printed organic thermoelectrics.
- 1 April 2019
- Published by Wiley in Advanced Materials Technologies
- Vol. 4 (7)
Digital Inkjet Printing of High‐Efficiency Large‐Area Nonfullerene Organic Solar Cells
Novel emerging materials for organic solar cells, such as nonfullerene acceptors, are paving the way for commercialization of organic photovoltaics. Their utilization in unconventional applications, such as conformable and disposable electronics, has turned the focus to inkjet printing as a fabrication method with advantages including low material usage, rapid digital design changes, and high resolution. In this work, the fabrication of efficient nonfullerene acceptor devices through inkjet printing for organic photovoltaic applications is reported for the first time. The engineering of printable poly‐3‐hexylthiophene:rhodanine‐benzothiadiazole‐coupled indacenodithiophene (P3HT:O‐IDTBR) inks is centered on tuning the rheological properties for proper droplet ejection and the selection of solvents, including hydrocarbons, that meet solubility and volatility requirements to avoid common inkjet printing complications like nozzle clogging. The optimization of printing parameters including drop spacing and deposition temperatures results in homogeneous P3HT:O‐IDTBR films with device efficiencies of up to 6.47% for small lab‐scale devices (0.1 cm2), comparable with that of spin‐coating or blade‐coating. A 2 cm2 inkjet‐printed device is also shown to achieve a remarkable efficiency of 6%. To demonstrate their potential usage in customized applications, large‐area devices are fabricated in the shape of a marine turtle with 4.76% efficiency, showcasing the versatility of the inkjet‐printing process for efficient organic photovoltaics.
- 1 April 2019
- Published by Wiley in Advanced Materials Technologies
- Vol. 4 (7)
Digital Inkjet Printing of High‐Efficiency Large‐Area Nonfullerene Organic Solar Cells
Novel emerging materials for organic solar cells, such as nonfullerene acceptors, are paving the way for commercialization of organic photovoltaics. Their utilization in unconventional applications, such as conformable and disposable electronics, has turned the focus to inkjet printing as a fabrication method with advantages including low material usage, rapid digital design changes, and high resolution. In this work, the fabrication of efficient nonfullerene acceptor devices through inkjet printing for organic photovoltaic applications is reported for the first time. The engineering of printable poly‐3‐hexylthiophene:rhodanine‐benzothiadiazole‐coupled indacenodithiophene (P3HT:O‐IDTBR) inks is centered on tuning the rheological properties for proper droplet ejection and the selection of solvents, including hydrocarbons, that meet solubility and volatility requirements to avoid common inkjet printing complications like nozzle clogging. The optimization of printing parameters including drop spacing and deposition temperatures results in homogeneous P3HT:O‐IDTBR films with device efficiencies of up to 6.47% for small lab‐scale devices (0.1 cm2), comparable with that of spin‐coating or blade‐coating. A 2 cm2 inkjet‐printed device is also shown to achieve a remarkable efficiency of 6%. To demonstrate their potential usage in customized applications, large‐area devices are fabricated in the shape of a marine turtle with 4.76% efficiency, showcasing the versatility of the inkjet‐printing process for efficient organic photovoltaics.
- Open Access
- 17 December 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-10
Single crystal hybrid perovskite field-effect transistors
The fields of photovoltaics, photodetection and light emission have seen tremendous activity in recent years with the advent of hybrid organic-inorganic perovskites. Yet, there have been far fewer reports of perovskite-based field-effect transistors. The lateral and interfacial transport requirements of transistors make them particularly vulnerable to surface contamination and defects rife in polycrystalline films and bulk single crystals. Here, we demonstrate a spatially-confined inverse temperature crystallization strategy which synthesizes micrometre-thin single crystals of methylammonium lead halide perovskites MAPbX3 (X = Cl, Br, I) with sub-nanometer surface roughness and very low surface contamination. These benefit the integration of MAPbX3 crystals into ambipolar transistors and yield record, room-temperature field-effect mobility up to 4.7 and 1.5 cm2 V−1 s−1 in p and n channel devices respectively, with 104 to 105 on-off ratio and low turn-on voltages. This work paves the way for integrating hybrid perovskite crystals into printed, flexible and transparent electronics.
- 17 December 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-10
Open AccessSingle crystal hybrid perovskite field-effect transistors
The fields of photovoltaics, photodetection and light emission have seen tremendous activity in recent years with the advent of hybrid organic-inorganic perovskites. Yet, there have been far fewer reports of perovskite-based field-effect transistors. The lateral and interfacial transport requirements of transistors make them particularly vulnerable to surface contamination and defects rife in polycrystalline films and bulk single crystals. Here, we demonstrate a spatially-confined inverse temperature crystallization strategy which synthesizes micrometre-thin single crystals of methylammonium lead halide perovskites MAPbX3 (X = Cl, Br, I) with sub-nanometer surface roughness and very low surface contamination. These benefit the integration of MAPbX3 crystals into ambipolar transistors and yield record, room-temperature field-effect mobility up to 4.7 and 1.5 cm2 V−1 s−1 in p and n channel devices respectively, with 104 to 105 on-off ratio and low turn-on voltages. This work paves the way for integrating hybrid perovskite crystals into printed, flexible and transparent electronics.