Wenlong Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wenlong Zhang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Yue Liang
School of Materials , Harbin University of Science and Technology, No. 249, Zhengyi Road, No. 4, Linyuan Road, Harbin University of Science and Technology, Harbin City, Heilongjiang Province, Harbin, Heilongjiang, 150000, CHINA
4 shared publicationsChunyu Li
2 shared publicationsLing Weng
College of Material Science & Engineering, Harbin University of Science and Technology, Harbin, China
2 shared publications- Yingyi Ma
School of Material Science and Chemical Engineering
2 shared publications - Zhenfeng He
School of Chemical Engineering and Technology, North University of China, Taiyuan, China
2 shared publications - Zijian Wu
School of materials science and chemical engineering, Harbin University of Science and Technology, Harbin, China
2 shared publications
Latest Publications
- Open Access
- 1 May 2022
- Published by IOP Publishing in Materials Research Express
- Vol. 9 (5) , 055304
Preparation and properties of ethylene-vinyl acetate grafted acrylonitrile
Ethylene-vinyl acetate copolymer (EVA) was functionalized to varying degrees with acrylonitrile (AN) by melt grafting processes. Fourier transform infrared spectra (FT-IR) confirmed that AN was successfully grafted onto the EVA. High resistance meter, electronic universal testing machine, etc have studied the influencing factors of grafting process and the effect of grafting rate on oil resistance, mechanical properties and electrical properties. The results show that the optimal grafting process is that the dosage of AN is 8.0 wt%, the dosage of styrene (St) is 5.0 wt%, the dosage of Dilauroyl peroxide (LPO) is 0.4 wt% of the total amount of AN and St, and the grafting rate is 1.24%. With the increase of the amount of LPO and AN, the grafting rate first increased and then decreased. The grafting rate increases, so that the oil resistance, volume resistivity, and breakdown field strength of the grafted product are gradually increased. When the grafting rate is 1.24%, the volume resistivity is 1.63 × 1013 Ω·m, which is significantly improved compared with pure EVA, and the breakdown field strength is 23.26 kV mm−1, which is 12.3% higher than pure EVA.
- 1 May 2022
- Published by IOP Publishing in Materials Research Express
- Vol. 9 (5) , 055304
Open AccessPreparation and properties of ethylene-vinyl acetate grafted acrylonitrile
Ethylene-vinyl acetate copolymer (EVA) was functionalized to varying degrees with acrylonitrile (AN) by melt grafting processes. Fourier transform infrared spectra (FT-IR) confirmed that AN was successfully grafted onto the EVA. High resistance meter, electronic universal testing machine, etc have studied the influencing factors of grafting process and the effect of grafting rate on oil resistance, mechanical properties and electrical properties. The results show that the optimal grafting process is that the dosage of AN is 8.0 wt%, the dosage of styrene (St) is 5.0 wt%, the dosage of Dilauroyl peroxide (LPO) is 0.4 wt% of the total amount of AN and St, and the grafting rate is 1.24%. With the increase of the amount of LPO and AN, the grafting rate first increased and then decreased. The grafting rate increases, so that the oil resistance, volume resistivity, and breakdown field strength of the grafted product are gradually increased. When the grafting rate is 1.24%, the volume resistivity is 1.63 × 1013 Ω·m, which is significantly improved compared with pure EVA, and the breakdown field strength is 23.26 kV mm−1, which is 12.3% higher than pure EVA.
- 19 August 2021
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 50 (11) , 6228-6236
Preparation and Electrical Properties of 4-allyloxy-2-hydroxybenzophenone Grafted Polypropylene for HVDC Cables
- 19 August 2021
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 50 (11) , 6228-6236
Preparation and Electrical Properties of 4-allyloxy-2-hydroxybenzophenone Grafted Polypropylene for HVDC Cables
- Open Access
- 1 August 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (8) , 085301
Block polypropylene/styrene-ethylene-butylene-styrene tri-block copolymer blends for recyclable HVDC cable insulation
Polypropylene (PP) is regarded as the most promising candidate for eco-friendly high-voltage direct current (HVDC) cable insulation material due to its excellent thermal and electrical properties. In this paper, a block polypropylene (BPP) was selected as the matrix and blended with styrene-ethylene-butylene-styrene tri-block copolymer (SEBS) by melt blending. The thermal behavior, dynamic mechanical behavior, crystallization behavior, and mechanical and electrical properties of the BPP/SEBS blends were investigated. It was found that SEBS could efficiently improve the flexibility while maintaining the excellent heat resistance of PPB. Furthermore, adding an appropriate amount of SEBS had a positive effect on suppressing the space charge and increasing the breakdown field strength. For the BPP/SEBS blend containing 20 wt% SEBS, a desirable combination of thermal, mechanical, and electrical properties was achieved. This work may help pave the way for developing eco-friendly PP insulating material in HVDC cable applications.
- 1 August 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (8) , 085301
Open AccessBlock polypropylene/styrene-ethylene-butylene-styrene tri-block copolymer blends for recyclable HVDC cable insulation
Polypropylene (PP) is regarded as the most promising candidate for eco-friendly high-voltage direct current (HVDC) cable insulation material due to its excellent thermal and electrical properties. In this paper, a block polypropylene (BPP) was selected as the matrix and blended with styrene-ethylene-butylene-styrene tri-block copolymer (SEBS) by melt blending. The thermal behavior, dynamic mechanical behavior, crystallization behavior, and mechanical and electrical properties of the BPP/SEBS blends were investigated. It was found that SEBS could efficiently improve the flexibility while maintaining the excellent heat resistance of PPB. Furthermore, adding an appropriate amount of SEBS had a positive effect on suppressing the space charge and increasing the breakdown field strength. For the BPP/SEBS blend containing 20 wt% SEBS, a desirable combination of thermal, mechanical, and electrical properties was achieved. This work may help pave the way for developing eco-friendly PP insulating material in HVDC cable applications.
- 28 January 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (5) , 3890-3898
Preparation and electrical properties of 4-acetoxystyrene grafted polypropylene for HVDC cable insulation
- 28 January 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (5) , 3890-3898
Preparation and electrical properties of 4-acetoxystyrene grafted polypropylene for HVDC cable insulation
- 14 December 2018
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (7) , 5952-5960
Sandwich-type porous polyimide film with improved dielectric, water resistance and mechanical properties
- 14 December 2018
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (7) , 5952-5960
Sandwich-type porous polyimide film with improved dielectric, water resistance and mechanical properties
- 27 June 2018
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 13 (14) , 1836-1841
Honeycomb‐Patterned Polyimide Film as a Versatile Coating for High‐Performance Dielectric Material
A honeycomb‐patterned porous film was conveniently prepared by means of the microemulsion method and then used as an effective coating for improving the dielectric properties and water resistance of polyimide (PI) film while maintaining its mechanical properties. The dielectric properties could be regulated by tuning the structure of the porous film through controlling its formation conditions. When suitable conditions were used, the prepared composite PI film exhibited a significant reduction of 28.3 % in its dielectric constant and 9.48–54.99 % in dielectric loss accompanied by an extremely low water uptake of 0.62 % relative to the 2.47 % of flat PI film. The composite PI film also displayed excellent durability under moist conditions, as the dielectric constant was still below 2.4 after exposure to 75 % relative humidity for more than 12 h. This provides a novel method to improve and control the dielectric properties of materials. It also suggests that this film is a suitable candidate for coating dielectric materials in high‐humidity environments.
- 27 June 2018
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 13 (14) , 1836-1841
Honeycomb‐Patterned Polyimide Film as a Versatile Coating for High‐Performance Dielectric Material
A honeycomb‐patterned porous film was conveniently prepared by means of the microemulsion method and then used as an effective coating for improving the dielectric properties and water resistance of polyimide (PI) film while maintaining its mechanical properties. The dielectric properties could be regulated by tuning the structure of the porous film through controlling its formation conditions. When suitable conditions were used, the prepared composite PI film exhibited a significant reduction of 28.3 % in its dielectric constant and 9.48–54.99 % in dielectric loss accompanied by an extremely low water uptake of 0.62 % relative to the 2.47 % of flat PI film. The composite PI film also displayed excellent durability under moist conditions, as the dielectric constant was still below 2.4 after exposure to 75 % relative humidity for more than 12 h. This provides a novel method to improve and control the dielectric properties of materials. It also suggests that this film is a suitable candidate for coating dielectric materials in high‐humidity environments.