Jingsi Huo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jingsi Huo has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Baisheng Chen
College of Civil Engineering, Hunan University
2 shared publicationsY.Z. Liu
Hunan Univ, Coll Civil Engn, Yuelu Mt, Changsha 410082, Peoples R China
2 shared publicationsYan Xiao
Professor, China Ministry of Education Key Laboratory of Bldg. Safety and Energy Efficiency, Hunan Univ., Yuelu Mountain, Changsha 410082, China; Dean, College of Civil Engineering, Nanjing Tech Univ., Nanjing 211816, China
2 shared publicationsYanzhi Liu
Hunan University
2 shared publications- Ahmed Y. Elghazouli
Department of Civil & Environmental Engineering Hong Kong Polytechnic University Hong Kong China
1 shared publication B. S. Chen
Hunan University
1 shared publication
Latest Publications
- 28 October 2024
- Published by Elsevier in Structures
- Vol. 70
Failure mechanism and deformation limit of square tubular T-joints under impact loading
- 28 October 2024
- Published by Elsevier in Structures
- Vol. 70
Failure mechanism and deformation limit of square tubular T-joints under impact loading
- Open Access
Experimental Study on Dynamic Mechanical Performance of Post-Fire Concrete Confined by CFRP Sheets
Impact tests on post-fire concrete confined by Carbon Fiber-Reinforced Polymer/Plastic (CFRP) sheets were carried out by using Split Hopkinson Pressure Bar (SHPB) experimental setup in this paper, with emphasis on the effect of exposed temperatures, CFRP layers and impact velocities. Firstly, according to the measured stress-strain curves, the effects of experiment parameters on concrete dynamic mechanical performance such as compressive strength, ultimate strain and energy absorption are discussed in details. Additionally, temperature caused a softening effect on the compressive strength of concrete specimens, while CFRP confinement and strain rate play a hardening effect, which can lead to the increase in dynamic compressive strength by 1.8 to 3.6 times compared to static conditions. However, their hardening mechanisms and action stages are extremely different. Finally, nine widely accepted Dynamic Increase Factor (DIF) models considering strain rate effect were summarized, and a simplified model evaluating dynamic compressive strength of post-fire concrete confined by CFRP sheets was proposed, which can provide evidence for engineering emergency repair after fire accidents.
Open AccessExperimental Study on Dynamic Mechanical Performance of Post-Fire Concrete Confined by CFRP Sheets
Impact tests on post-fire concrete confined by Carbon Fiber-Reinforced Polymer/Plastic (CFRP) sheets were carried out by using Split Hopkinson Pressure Bar (SHPB) experimental setup in this paper, with emphasis on the effect of exposed temperatures, CFRP layers and impact velocities. Firstly, according to the measured stress-strain curves, the effects of experiment parameters on concrete dynamic mechanical performance such as compressive strength, ultimate strain and energy absorption are discussed in details. Additionally, temperature caused a softening effect on the compressive strength of concrete specimens, while CFRP confinement and strain rate play a hardening effect, which can lead to the increase in dynamic compressive strength by 1.8 to 3.6 times compared to static conditions. However, their hardening mechanisms and action stages are extremely different. Finally, nine widely accepted Dynamic Increase Factor (DIF) models considering strain rate effect were summarized, and a simplified model evaluating dynamic compressive strength of post-fire concrete confined by CFRP sheets was proposed, which can provide evidence for engineering emergency repair after fire accidents.
- 1 December 2021
- Published by Elsevier in Structures
- Vol. 34, 615-629
Cyclic behaviour of a novel steel beam-to-prefabricated CFST column connection with threaded sleeve bolts
- 1 December 2021
- Published by Elsevier in Structures
- Vol. 34, 615-629
Cyclic behaviour of a novel steel beam-to-prefabricated CFST column connection with threaded sleeve bolts
- 28 November 2019
- Published by Springer Nature in Fire Technology
- Vol. 56 (4) , 1443-1464
Behaviour of Fire-Exposed Reinforced Concrete Joints with Varying Anchorage Details Subjected to Exterior Column Removal
- 28 November 2019
- Published by Springer Nature in Fire Technology
- Vol. 56 (4) , 1443-1464
Behaviour of Fire-Exposed Reinforced Concrete Joints with Varying Anchorage Details Subjected to Exterior Column Removal
- 1 February 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 144 (2)
Experimental Study on Impact Behavior of Stud Shear Connectors between Concrete Slab and Steel Beam
This paper deals with the shear behavior of steel stud connectors between a concrete slab and steel beam under static and impact loading. An experimental program involving four static and nine impact pushout tests was designed and carried out according to the descriptions in related specification. The failure modes and the time history of impact load and slippage displacement as well as the shear strength of stud connectors are presented and investigated. It is found from static tests that the shear capacity of stud connectors reasonably met the corresponding requirements in a related specification, while the dynamic shear capacities of the connectors were improved by 33–63% compared with the static results. Based on the dynamic responses, the shear mechanism of the steel stud shear connectors under impact loading is also examined, and the failure process can be divided into three typical stages. Furthermore, based on the equations given in some existing guidelines, a design proposal is developed to accurately predict the shear capacity of stud connectors under impact loading, where the strain-rate effect is considered according to the recommendations given in a published report for the concrete strength and in a published journal paper for the steel strength under impact loading. The testing results can provide essential data for future analytical and design-oriented study of composite beam with shear stud connectors under extreme loading conditions.
- 1 February 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 144 (2)
Experimental Study on Impact Behavior of Stud Shear Connectors between Concrete Slab and Steel Beam
This paper deals with the shear behavior of steel stud connectors between a concrete slab and steel beam under static and impact loading. An experimental program involving four static and nine impact pushout tests was designed and carried out according to the descriptions in related specification. The failure modes and the time history of impact load and slippage displacement as well as the shear strength of stud connectors are presented and investigated. It is found from static tests that the shear capacity of stud connectors reasonably met the corresponding requirements in a related specification, while the dynamic shear capacities of the connectors were improved by 33–63% compared with the static results. Based on the dynamic responses, the shear mechanism of the steel stud shear connectors under impact loading is also examined, and the failure process can be divided into three typical stages. Furthermore, based on the equations given in some existing guidelines, a design proposal is developed to accurately predict the shear capacity of stud connectors under impact loading, where the strain-rate effect is considered according to the recommendations given in a published report for the concrete strength and in a published journal paper for the steel strength under impact loading. The testing results can provide essential data for future analytical and design-oriented study of composite beam with shear stud connectors under extreme loading conditions.
- 10 August 2017
- Published by American Society of Civil Engineers (ASCE)
- p. 69-76
Experimental Study on Flexural Behavior of Impact-Damaged Reinforced Concrete Beams
The dynamic behavior of reinforced concrete (RC) structures under impact loadings has received great attention from civil engineers and researchers. However, few studies have been conducted to evaluate the flexural behavior of the impact-damaged RC beams. In order to further understand the effect of impact loading on the residual flexural behavior of RC beams, simply-supported RC beams with stirrups were impacted by a drop-weight hammer. Subsequently, the static tests were conducted on the impact-damaged beams to obtain the residual behavior. Another RC beam for comparison was loaded to failure without impacted damage. The crack patterns of the specimens were observed in order to investigate the mechanical behavior in detail. The effects of impact energy on the residual flexural resistance and mid-span deformation of the impact-damaged beams are discussed. The results of tests illustrate that the significant strain hardening effect should be considered in order to evaluate the residual flexural capacity of the impact-damaged beams reasonably.
- 10 August 2017
- Published by American Society of Civil Engineers (ASCE)
- p. 69-76
Experimental Study on Flexural Behavior of Impact-Damaged Reinforced Concrete Beams
The dynamic behavior of reinforced concrete (RC) structures under impact loadings has received great attention from civil engineers and researchers. However, few studies have been conducted to evaluate the flexural behavior of the impact-damaged RC beams. In order to further understand the effect of impact loading on the residual flexural behavior of RC beams, simply-supported RC beams with stirrups were impacted by a drop-weight hammer. Subsequently, the static tests were conducted on the impact-damaged beams to obtain the residual behavior. Another RC beam for comparison was loaded to failure without impacted damage. The crack patterns of the specimens were observed in order to investigate the mechanical behavior in detail. The effects of impact energy on the residual flexural resistance and mid-span deformation of the impact-damaged beams are discussed. The results of tests illustrate that the significant strain hardening effect should be considered in order to evaluate the residual flexural capacity of the impact-damaged beams reasonably.
- 1 October 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 20 (5)
Experimental Study on Dynamic Behavior of CFRP-to-Concrete Interface
Carbon fiber–reinforced polymer (CFRP) sheets/plates are widely used to strengthen deficient RC structures. Existing studies show that the effectiveness of externally bonded CFRP materials generally depends on the bond between the CFRP element and concrete. Most of the research studies developed so far have focused on the bond behavior of the CFRP sheet-concrete interface under static loading. In this work, the bond behavior was experimentally investigated from the dynamic standpoint, through the drop-mass impact test method, with the aim of highlighting the effect of the loading rate on the bond strength. The test results show that the strain distribution gradient of the CFRP sheets under impact loading was larger than under static loading, and that the loading rate significantly influences the bond strength, while only moderately affecting the effective bond length. A practical bond-slip model is proposed to simulate the CFRP-to-concrete interface bond behavior under dynamic conditions, which co...
- 1 October 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 20 (5)
Experimental Study on Dynamic Behavior of CFRP-to-Concrete Interface
Carbon fiber–reinforced polymer (CFRP) sheets/plates are widely used to strengthen deficient RC structures. Existing studies show that the effectiveness of externally bonded CFRP materials generally depends on the bond between the CFRP element and concrete. Most of the research studies developed so far have focused on the bond behavior of the CFRP sheet-concrete interface under static loading. In this work, the bond behavior was experimentally investigated from the dynamic standpoint, through the drop-mass impact test method, with the aim of highlighting the effect of the loading rate on the bond strength. The test results show that the strain distribution gradient of the CFRP sheets under impact loading was larger than under static loading, and that the loading rate significantly influences the bond strength, while only moderately affecting the effective bond length. A practical bond-slip model is proposed to simulate the CFRP-to-concrete interface bond behavior under dynamic conditions, which co...
- 3 April 2013
- Published by Springer Nature in Materials and Structures
- Vol. 47 (1-2) , 263-283
Experimental study on impact behaviour of concrete-filled steel tubes at elevated temperatures up to 800 °C
- 3 April 2013
- Published by Springer Nature in Materials and Structures
- Vol. 47 (1-2) , 263-283
Experimental study on impact behaviour of concrete-filled steel tubes at elevated temperatures up to 800 °C
- 11 July 2012
- Published by Springer Nature in Materials and Structures
- Vol. 46 (1-2) , 255-265
Experimental study on dynamic behaviours of concrete after exposure to high temperatures up to 700 °C
- 11 July 2012
- Published by Springer Nature in Materials and Structures
- Vol. 46 (1-2) , 255-265
Experimental study on dynamic behaviours of concrete after exposure to high temperatures up to 700 °C