Shih-Chia Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Shih-Chia Liu has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Weidong Zhou
University of Texas at Arlington
3 shared publications - Carl Reuterskiöld Hedlund
Department of Electrical Engineering, KTH Royal Institute of Technology 3 , 164 40 Kista, Sweden
2 shared publications - Mattias Hammar
Division of Electronics and Embedded Systems, Royal Institute of Technology, 114 28 Stockholm, Sweden
2 shared publications - Zhenqiang Ma
Department of Electrical and Computer Engineering University of Wisconsin‐Madison Madison Wisconsin USA
2 shared publications Abouzar Gharajeh
The University of Texas at Dallas, Richardson, TX, USA 75080
1 shared publication- Alexander A. Zakhidov
Alan G. MacDiarmid NanoTech Institute
1 shared publication
Latest Publications
- Open Access
- 27 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 10 (3) , 1-6
Size Scaling of Photonic Crystal Surface Emitting Lasers on Silicon Substrates
We report here the lateral cavity size scaling and confinement effects on the lasing performance in defect-free photonic crystal surface-emitting lasers (PCSEL) on silicon substrates. Hybrid PCSELs with different lateral cavity sizes and different lateral confinement geometries have been fabricated using transfer printing technology and controlled selective etching. The measured lasing properties show a strong dependence on the lateral cavity size below 100 μm. In particular, the finite lateral dimension significantly affects the laser threshold and side mode suppression ratio (SMSR) of the PCSEL devices. On the other hand, by controlling the lateral confinement using vertical etching, a reduction of the laser threshold is observed. The experimental results agree well with theoretical predictions. The work presented here can lead to ultra-compact PCSELs for on-chip integration with excellent energy efficiency.
- 27 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 10 (3) , 1-6
Open AccessSize Scaling of Photonic Crystal Surface Emitting Lasers on Silicon Substrates
We report here the lateral cavity size scaling and confinement effects on the lasing performance in defect-free photonic crystal surface-emitting lasers (PCSEL) on silicon substrates. Hybrid PCSELs with different lateral cavity sizes and different lateral confinement geometries have been fabricated using transfer printing technology and controlled selective etching. The measured lasing properties show a strong dependence on the lateral cavity size below 100 μm. In particular, the finite lateral dimension significantly affects the laser threshold and side mode suppression ratio (SMSR) of the PCSEL devices. On the other hand, by controlling the lateral confinement using vertical etching, a reduction of the laser threshold is observed. The experimental results agree well with theoretical predictions. The work presented here can lead to ultra-compact PCSELs for on-chip integration with excellent energy efficiency.
- 1 January 2018
- Published by Optica Publishing Group
- p. SW3Q.5
Electrically Pumped Hybrid III-V/Si Photonic Crystal Surface Emitting Lasers with Buried Tunnel-Junction
We report here an electrically pumped hybrid photonic crystal surface emitting laser (PCSELs) on silicon. The laser cavity consists of a transferred InGaAsP multi-quantum well (MQW) heterostructure membrane, printed on a single layer silicon photonic crystal (Si-PC) cavity. A buried tunnel-junction (BTJ) has been employed in the MQW structure for efficiency charge injection. Single mode emitted spectrum was achieved at 1504 nm for a large area laser in the continuous-wave (c.w.) mode under room temperature operation.
- 1 January 2018
- Published by Optica Publishing Group
- p. SW3Q.5
Electrically Pumped Hybrid III-V/Si Photonic Crystal Surface Emitting Lasers with Buried Tunnel-Junction
We report here an electrically pumped hybrid photonic crystal surface emitting laser (PCSELs) on silicon. The laser cavity consists of a transferred InGaAsP multi-quantum well (MQW) heterostructure membrane, printed on a single layer silicon photonic crystal (Si-PC) cavity. A buried tunnel-junction (BTJ) has been employed in the MQW structure for efficiency charge injection. Single mode emitted spectrum was achieved at 1504 nm for a large area laser in the continuous-wave (c.w.) mode under room temperature operation.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 534-536
Amplified spontaneous emission in nanoimprinted perovskite nanograting metasurface
Hybrid halide perovskite has made great advances for making new composition of materials, which have wide usage in advanced optoelectronic devices. Here we show amplified spontaneous emission (ASE) in a perovskite nanograting metasurface, defined by the cost effective nanoimprint lithography method which cannot typically be applied to hard, ionic based materials such as perovskite.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 534-536
Amplified spontaneous emission in nanoimprinted perovskite nanograting metasurface
Hybrid halide perovskite has made great advances for making new composition of materials, which have wide usage in advanced optoelectronic devices. Here we show amplified spontaneous emission (ASE) in a perovskite nanograting metasurface, defined by the cost effective nanoimprint lithography method which cannot typically be applied to hard, ionic based materials such as perovskite.
- Open Access
Transfer Printed Nanomembranes for Heterogeneously Integrated Membrane Photonics
Heterogeneous crystalline semiconductor nanomembrane (NM) integration is investigated for single-layer and double-layer Silicon (Si) NM photonics, III-V/Si NM lasers, and graphene/Si NM total absorption devices. Both homogeneous and heterogeneous integration are realized by the versatile transfer printing technique. The performance of these integrated membrane devices shows, not only intact optical and electrical characteristics as their bulk counterparts, but also the unique light and matter interactions, such as Fano resonance, slow light, and critical coupling in photonic crystal cavities. Such a heterogeneous integration approach offers tremendous practical application potentials on unconventional, Si CMOS compatible, and high performance optoelectronic systems.
Open AccessTransfer Printed Nanomembranes for Heterogeneously Integrated Membrane Photonics
Heterogeneous crystalline semiconductor nanomembrane (NM) integration is investigated for single-layer and double-layer Silicon (Si) NM photonics, III-V/Si NM lasers, and graphene/Si NM total absorption devices. Both homogeneous and heterogeneous integration are realized by the versatile transfer printing technique. The performance of these integrated membrane devices shows, not only intact optical and electrical characteristics as their bulk counterparts, but also the unique light and matter interactions, such as Fano resonance, slow light, and critical coupling in photonic crystal cavities. Such a heterogeneous integration approach offers tremendous practical application potentials on unconventional, Si CMOS compatible, and high performance optoelectronic systems.