Papul Changmai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Papul Changmai has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Sanjeev Kumar Metya
National Institute of Technology Arunachal Pradesh
4 shared publications - Sisir Kumar Nayak
IIT Guwahati
3 shared publications Abhijit Bora
Department of CA, ADBU 781 017, India
1 shared publication- Belqasem Aljafari
Electrical Engineering Department, College of Engineering, Najran University, Najran, Saudi Arabia
1 shared publication - Benedetto Nastasi
Department of Planning, Design and Technology of Architecture, Sapienza University of Rome, Via Flaminia 72, 00196 Rome, Italy
1 shared publication - Darshana Sharma
Assam Donbosco University
1 shared publication
Latest Publications
- 28 July 2026
- Published by Springer Nature
- p. 121-133
Optimization of $K_{v}$ (Voltage Constant) Required for MPP Tracking of Solar PV System- 28 July 2026
- Published by Springer Nature
- p. 121-133
Optimization of $K_{v}$ (Voltage Constant) Required for MPP Tracking of Solar PV System- Open Access
- 1 June 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Pure & Applied Physics
- Vol. 63 (6) , 460-466
Reliable EAR Method to Increase the Performance of a Solar PV Array connected in TCT fashion even in Partial Shading Condition
In partial shading condition (PSC), the solar photo-voltaic (PV) array’s efficiency is significantly reduced. Although using a bypass diode increases the efficiency of a PV array that is connected in series, it also causes problems with multiple peaks (local and global peaks). Total-Cross-Tied (TCT) connections are suggested in the literature as a solution to these problems. Despite having superior performance when compared to other configurations like SP, bridge links, honeycomb, etc., the TCT-connected PV array does not provide satisfactory results for all types of shading patterns. This work proposes a robust algorithm to address these problems, allowing PV installers to achieve high efficiency under any type of shading pattern. The electrical array reconfiguration (EAR) technique is used in the proposed algorithm. The results of laboratoryscale experiments and MATLAB simulations used to verify the proposed model demonstrate extremely close coordination.
- 1 June 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Pure & Applied Physics
- Vol. 63 (6) , 460-466
Open AccessReliable EAR Method to Increase the Performance of a Solar PV Array connected in TCT fashion even in Partial Shading Condition
In partial shading condition (PSC), the solar photo-voltaic (PV) array’s efficiency is significantly reduced. Although using a bypass diode increases the efficiency of a PV array that is connected in series, it also causes problems with multiple peaks (local and global peaks). Total-Cross-Tied (TCT) connections are suggested in the literature as a solution to these problems. Despite having superior performance when compared to other configurations like SP, bridge links, honeycomb, etc., the TCT-connected PV array does not provide satisfactory results for all types of shading patterns. This work proposes a robust algorithm to address these problems, allowing PV installers to achieve high efficiency under any type of shading pattern. The electrical array reconfiguration (EAR) technique is used in the proposed algorithm. The results of laboratoryscale experiments and MATLAB simulations used to verify the proposed model demonstrate extremely close coordination.
- Open Access
A Critical Review on the Estimation Techniques of the Solar PV Cell’s Unknown Parameters
To meet the exponentially growing demand for clean and green energy, the solar photovoltaic (PV) system’s importance is increasing day by day, for which PV modeling is considered to be one of the most important work in the current state-of-the-art methods. To effectively model a PV system, accurate PV parameter estimation is of the utmost importance. In line with this, although the values of some of the parameters are provided in the manufacturer’s datasheet, the values of unknown parameters, such as shunt resistance, series resistance, the diode ideality factor, photo-generated current and diode saturation current, are not provided. To estimate these values a lot of algorithms are already reported in the literature. After careful observation of all the reported algorithms, a few best-reported algorithms are identified and their performances are compared with respect to accuracy, convergence issues, computational complexity and thermal stability. All kind of algorithms, such as numerical, analytical and evolutionary algorithms, are considered in this study, and only the best reported algorithms are considered for the comparison.
Open AccessA Critical Review on the Estimation Techniques of the Solar PV Cell’s Unknown Parameters
To meet the exponentially growing demand for clean and green energy, the solar photovoltaic (PV) system’s importance is increasing day by day, for which PV modeling is considered to be one of the most important work in the current state-of-the-art methods. To effectively model a PV system, accurate PV parameter estimation is of the utmost importance. In line with this, although the values of some of the parameters are provided in the manufacturer’s datasheet, the values of unknown parameters, such as shunt resistance, series resistance, the diode ideality factor, photo-generated current and diode saturation current, are not provided. To estimate these values a lot of algorithms are already reported in the literature. After careful observation of all the reported algorithms, a few best-reported algorithms are identified and their performances are compared with respect to accuracy, convergence issues, computational complexity and thermal stability. All kind of algorithms, such as numerical, analytical and evolutionary algorithms, are considered in this study, and only the best reported algorithms are considered for the comparison.
- 18 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (4) , 3883-3894
Maximum Power Estimation of Total Cross-Tied Connected PV Cells in Different Shading Conditions for High Current Application
In the existing solar photovoltaic (PV) modules, cells are connected in series. The performance of the series-connected module degrades severely during partial shading conditions (PSCs). Furthermore, the use of bypass diode causes multiple peak (local and global peaks) problems. Therefore, a total cross tied (TCT) connection has been proposed in this article to connect the cells in a module (TCT connected module) that gives a better performance during partial shading without multiple peak problems. A novel analytical algorithm is presented in this article, which will help the PV installers to estimate the output power of a TCT connected module without using any sophisticated measuring instruments except irradiance and temperature measurement. The proposed analytical algorithm is simple, robust, and user-friendly, which can be widely used in multidisciplinary research. The output of the proposed model is verified with the simulation and laboratory-scale experimental results, which shows less than 4.58% error. Moreover, the proposed algorithm is implemented in a 10 MW solar plant, which shows around 174.44% performance improvement (PI) compared to the existing TCT connected array. Furthermore, the current value of the TCT connected module is very high, which can be effectively used in high current applications such as welding even in PSC.
- 18 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (4) , 3883-3894
Maximum Power Estimation of Total Cross-Tied Connected PV Cells in Different Shading Conditions for High Current Application
In the existing solar photovoltaic (PV) modules, cells are connected in series. The performance of the series-connected module degrades severely during partial shading conditions (PSCs). Furthermore, the use of bypass diode causes multiple peak (local and global peaks) problems. Therefore, a total cross tied (TCT) connection has been proposed in this article to connect the cells in a module (TCT connected module) that gives a better performance during partial shading without multiple peak problems. A novel analytical algorithm is presented in this article, which will help the PV installers to estimate the output power of a TCT connected module without using any sophisticated measuring instruments except irradiance and temperature measurement. The proposed analytical algorithm is simple, robust, and user-friendly, which can be widely used in multidisciplinary research. The output of the proposed model is verified with the simulation and laboratory-scale experimental results, which shows less than 4.58% error. Moreover, the proposed algorithm is implemented in a 10 MW solar plant, which shows around 174.44% performance improvement (PI) compared to the existing TCT connected array. Furthermore, the current value of the TCT connected module is very high, which can be effectively used in high current applications such as welding even in PSC.
- Open Access
- 3 July 2020
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 14 (11) , 1988-1996
Estimation of PV module parameters from the manufacturer's datasheet for MPP estimation
A study has been performed to extract the unknown parameters of a photovoltaic (PV) module using mathematical model‐driven analysis. Neglecting the less significant terms, the number of non‐linear exponential terms are reduced to develop a simplified algorithm to estimate five unknown parameters such as diode ideality factor, series resistance, shunt resistance, diode saturation current and photogenerated current of a single diode model PV module accurately with less computational complexities from the manufacturer's datasheet values. Substituting the estimated values of the unknown parameters, the PV module output power is obtained at different irradiance and temperature, which shows close co‐ordination with the datasheet values. To improve the accuracy in the estimation of the PV module output using the proposed model, the nominal operating cell temperature (NOCT) is considered. The results of the proposed model are verified with the experimental output of two (one 315 Wp and another 3 Wp) PV modules, which shows better correlation with the proposed model considering NOCT. The measurement uncertainty to obtain the output power experimentally is not more than 6.88%.
- 3 July 2020
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 14 (11) , 1988-1996
Open AccessEstimation of PV module parameters from the manufacturer's datasheet for MPP estimation
A study has been performed to extract the unknown parameters of a photovoltaic (PV) module using mathematical model‐driven analysis. Neglecting the less significant terms, the number of non‐linear exponential terms are reduced to develop a simplified algorithm to estimate five unknown parameters such as diode ideality factor, series resistance, shunt resistance, diode saturation current and photogenerated current of a single diode model PV module accurately with less computational complexities from the manufacturer's datasheet values. Substituting the estimated values of the unknown parameters, the PV module output power is obtained at different irradiance and temperature, which shows close co‐ordination with the datasheet values. To improve the accuracy in the estimation of the PV module output using the proposed model, the nominal operating cell temperature (NOCT) is considered. The results of the proposed model are verified with the experimental output of two (one 315 Wp and another 3 Wp) PV modules, which shows better correlation with the proposed model considering NOCT. The measurement uncertainty to obtain the output power experimentally is not more than 6.88%.
- 28 November 2019
- Published by Springer Nature in Journal of Optics
- Vol. 48 (4) , 499-504
Determination of the best shading pattern to maximize the power of TCT connected solar PV array during partial shading condition
- 28 November 2019
- Published by Springer Nature in Journal of Optics
- Vol. 48 (4) , 499-504
Determination of the best shading pattern to maximize the power of TCT connected solar PV array during partial shading condition
- Open Access
- 27 August 2019
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 13 (14) , 2647-2655
Mathematical model to estimate the maximum power output of a total cross tied connected PV array during partial shading condition
Estimation of the output power of a solar photovoltaic (PV) system during partial shading condition (PSC) is an interest of PV installers. Owing to the inclusion of a bypass diode, the occurrence of local and global maximum peak creates more difficulty in the calculation of maximum power output from a PV array. In this study, a mathematical model is established to estimate the percentage of degradation of a square total cross tied (TCT) connected PV array at different PSCs. By employing the proposed algorithm, it will be easier to estimate the maximum power point of a ( ) TCT connected PV array during PSC without using any measuring instrument except for the measurement of irradiance and temperature. A better correlation is obtained when the output of the proposed model is compared with MATLAB simulated output. The output of the proposed model is compared with the experimental output performed on an array comprises of 3 W PV modules and the comparison shows the satisfactory result.
- 27 August 2019
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 13 (14) , 2647-2655
Open AccessMathematical model to estimate the maximum power output of a total cross tied connected PV array during partial shading condition
Estimation of the output power of a solar photovoltaic (PV) system during partial shading condition (PSC) is an interest of PV installers. Owing to the inclusion of a bypass diode, the occurrence of local and global maximum peak creates more difficulty in the calculation of maximum power output from a PV array. In this study, a mathematical model is established to estimate the percentage of degradation of a square total cross tied (TCT) connected PV array at different PSCs. By employing the proposed algorithm, it will be easier to estimate the maximum power point of a ( ) TCT connected PV array during PSC without using any measuring instrument except for the measurement of irradiance and temperature. A better correlation is obtained when the output of the proposed model is compared with MATLAB simulated output. The output of the proposed model is compared with the experimental output performed on an array comprises of 3 W PV modules and the comparison shows the satisfactory result.