Jialin Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jialin Zhou has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Erwin Oh
Griffith University
13 shared publications- Erwin Oh
Griffith University
4 shared publications Lin Zhang
School of Transportation, Southeast University, Nanjing, China
4 shared publications- Guowei Sui
School of Engineering and Built Environment, Griffith University, 58 Parklands Dr, Southport, QLD 4215, Australia
2 shared publications Jian Lu
Jiangsu Key Laboratory of Urban ITS, Southeast University, Si Pai Lou #2, Nanjing 210096, China
2 shared publications- Jian Lu
Jiangsu Key Laboratory of Urban ITS, Southeast University
2 shared publications
Latest Publications
- Open Access
- 19 January 2024
- Published by MDPI AG in Geotechnics
- Vol. 4 (1) , 158-179
Parametric Study of Lateral Load on Helical Pipe Piles in Clay
In the past decades, as the world has placed emphasis on green energy, solar energy has become a favorable option. Different piled foundations have been designed to strengthen the structure supporting the solar panels. These piled foundations include rectangular and circular hollow section piles, as well as H-shaped piles. With various environmental loadings, lateral soil displacement will be encountered when large solar panels are installed on the supporting structure at an inclined angle. Presently, helical pipe piles are widely used in solar farms as part of the supporting structure. In this paper, the pile–soil interaction of steel pipe piles and helical pipe piles with wind loads is analyzed using ABAQUS. The Finite Element Method (FEM) models are assessed with varying strength moduli and cohesions of clay. Further, this paper examines the pile soil system, considering different clay stiffnesses, including very soft, soft, firm, stiff, very stiff, and hard. It is found that the helical piles’ horizontal capacity increases with soil strength and Young’s modulus, but the capacity increment rate reacts differently. This study has a guiding effect on the construction of solar farms using the “tracker” solar system.
- 19 January 2024
- Published by MDPI AG in Geotechnics
- Vol. 4 (1) , 158-179
Open AccessParametric Study of Lateral Load on Helical Pipe Piles in Clay
In the past decades, as the world has placed emphasis on green energy, solar energy has become a favorable option. Different piled foundations have been designed to strengthen the structure supporting the solar panels. These piled foundations include rectangular and circular hollow section piles, as well as H-shaped piles. With various environmental loadings, lateral soil displacement will be encountered when large solar panels are installed on the supporting structure at an inclined angle. Presently, helical pipe piles are widely used in solar farms as part of the supporting structure. In this paper, the pile–soil interaction of steel pipe piles and helical pipe piles with wind loads is analyzed using ABAQUS. The Finite Element Method (FEM) models are assessed with varying strength moduli and cohesions of clay. Further, this paper examines the pile soil system, considering different clay stiffnesses, including very soft, soft, firm, stiff, very stiff, and hard. It is found that the helical piles’ horizontal capacity increases with soil strength and Young’s modulus, but the capacity increment rate reacts differently. This study has a guiding effect on the construction of solar farms using the “tracker” solar system.
- Open Access
- 30 August 2022
- Published by MDPI AG in Geosciences
- Vol. 12 (9) , 329
Parametric Study of Lateral Loaded Blade Pile in Clay
The study of the mechanical properties between the pile and soil is limited when an enlarged head is added at the bottom of the pile foundation, which acts as anchor stabilization. This study investigates the blade pile foundation used in a solar panel project, which is subjected to lateral wind load action. The parametrical study is performed through the numerical simulation of the blade pile that is embedded in clay soil. The study considers both the soil modulus and the strength parameter of cohesion and concludes that the blade pile foundation capacity has a positive correlation with both. Moreover, when adding blades to a normal circular hollow section (CHS) pile, if the clay cohesion is less than 35 MPa, the capacity improvement rate will be greater. It analyzes the simulated load versus the soil displacement by considering clay in the soil states of very soft, soft, firm, stiff, very stiff and hard. This study finds that the blade application increases the lateral capacity of the pile foundation. In addition, when the soil is very soft to firm, adding blades results in a higher percentage of capacity improvement, which is up to 14.8% for the standard 1.5-m CHS pile with an outside diameter of 76.1 mm.
- 30 August 2022
- Published by MDPI AG in Geosciences
- Vol. 12 (9) , 329
Open AccessParametric Study of Lateral Loaded Blade Pile in Clay
The study of the mechanical properties between the pile and soil is limited when an enlarged head is added at the bottom of the pile foundation, which acts as anchor stabilization. This study investigates the blade pile foundation used in a solar panel project, which is subjected to lateral wind load action. The parametrical study is performed through the numerical simulation of the blade pile that is embedded in clay soil. The study considers both the soil modulus and the strength parameter of cohesion and concludes that the blade pile foundation capacity has a positive correlation with both. Moreover, when adding blades to a normal circular hollow section (CHS) pile, if the clay cohesion is less than 35 MPa, the capacity improvement rate will be greater. It analyzes the simulated load versus the soil displacement by considering clay in the soil states of very soft, soft, firm, stiff, very stiff and hard. This study finds that the blade application increases the lateral capacity of the pile foundation. In addition, when the soil is very soft to firm, adding blades results in a higher percentage of capacity improvement, which is up to 14.8% for the standard 1.5-m CHS pile with an outside diameter of 76.1 mm.
- Open Access
- 22 July 2022
- Published by MDPI AG in Geosciences
- Vol. 12 (8) , 284
Validation of Analytical Solutions for Predicting Drilled Pile Behaviour under Bi-Directional Static Load Tests
A bi-directional static load test (BDSLT) is one of the most effective methods for accurately estimating pile bearing capacity, in which the test pile is divided into two portions by activating the single-loading device welded along the pile shaft. BDSLT, thus, eliminates the safety concerns and space limitations imposed by the reaction system, as compared to conventional static load tests (kentledge). Based on this study’s project requirements, two loading devices (supercells) were welded along the pile shaft to provide sufficient bearing capacity under the BDSLT, and an equivalent method was applied to interpret the measured load–settlement response. Since the sacrificial loading device welded along the pile shaft cannot be re-used, BDSLTs lead to increased construction costs; however, their capacity for rapid set-up in a limited space and reliable application for long piles are benefits that easily justify their use. Therefore, researchers must understand how BDSLTs perform, especially regarding double-loading devices. As informed by site investigation, this paper validates the conventional analytical solutions regarding test piles in preliminary designs, including Alpha and Beta and semi-empirical methods. In terms of a soil stiffness reduction model, modified closed-form analytical solutions based on Randolph’s analytical method were applied to predict the load–settlement response.
- 22 July 2022
- Published by MDPI AG in Geosciences
- Vol. 12 (8) , 284
Open AccessValidation of Analytical Solutions for Predicting Drilled Pile Behaviour under Bi-Directional Static Load Tests
A bi-directional static load test (BDSLT) is one of the most effective methods for accurately estimating pile bearing capacity, in which the test pile is divided into two portions by activating the single-loading device welded along the pile shaft. BDSLT, thus, eliminates the safety concerns and space limitations imposed by the reaction system, as compared to conventional static load tests (kentledge). Based on this study’s project requirements, two loading devices (supercells) were welded along the pile shaft to provide sufficient bearing capacity under the BDSLT, and an equivalent method was applied to interpret the measured load–settlement response. Since the sacrificial loading device welded along the pile shaft cannot be re-used, BDSLTs lead to increased construction costs; however, their capacity for rapid set-up in a limited space and reliable application for long piles are benefits that easily justify their use. Therefore, researchers must understand how BDSLTs perform, especially regarding double-loading devices. As informed by site investigation, this paper validates the conventional analytical solutions regarding test piles in preliminary designs, including Alpha and Beta and semi-empirical methods. In terms of a soil stiffness reduction model, modified closed-form analytical solutions based on Randolph’s analytical method were applied to predict the load–settlement response.
- 1 March 2022
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 156
Dynamic response of unsaturated poroelastic ground underlying uneven pavement subjected to vehicle load
- 1 March 2022
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 156
Dynamic response of unsaturated poroelastic ground underlying uneven pavement subjected to vehicle load
- 12 February 2021
- Published by Springer Nature
- p. 173-195
Field Tests of Super-Long and Large Diameter Piles
- 12 February 2021
- Published by Springer Nature
- p. 173-195
Field Tests of Super-Long and Large Diameter Piles
- 12 February 2021
- Published by Springer Nature
- p. 5-79
General Principles and Practices
- 12 February 2021
- Published by Springer Nature
- p. 1-4
Introduction
- 12 February 2021
- Published by Springer Nature
- p. 267-272
Conclusions and Recommendations
- 12 February 2021
- Published by Springer Nature
- p. 107-138
Field Tests of Precast Concrete Piles