Marco Lops

This work investigates a radar-centric integrated sensing and communication (ISAC) transceiver that incorporates a simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) and a radar receiver equipped with a passive electronically scanned array (PESA) and a single digital channel. A periodic pulsed waveform, emitted by a feeder, illuminates the STAR-RIS, which applies space-time modulation to the redirected pulses. The spatial response of the STAR-RIS and the spatial beamformer of the radar receiver are jointly designed to illuminate desired directions on each side of the STAR-RIS, i.e., those monitored by the radar and those corresponding to communication users, while mitigating clutter returns. Time modulation enables both the embedding of communication data and the assignment of unique signatures to echoes from each side of the STAR-RIS. Two encoding schemes are proposed, enabling either simultaneous or sequential illumination of the two sides, while the corresponding radar and communication receivers are designed using a generalized information criterion. Several trade-offs between radar and communication functionalities can be achieved by adjusting the STAR-RIS and PESA array power patterns; in addition, the proposed data encoding schemes allow different data transmission and error rates, while having minimal impact on the radar performance.

Integrated sensing and communication (ISAC) enables numerous innovative wireless applications. Communication-centric design is a practical choice for the construction of the sixth generation (6G) ISAC networks. Continuous-wave-based ISAC systems, with orthogonal frequency-division multiplexing (OFDM) being a representative example, suffer from the self-interference (SI) problem, and hence are less suitable for long-range sensing. On the other hand, pulse-based half-duplex ISAC systems are free of SI, but are also less favourable for high-throughput communication scenarios. In this treatise, we propose MASked Modulation (MASM), a half-duplex ISAC waveform design scheme, which minimises a range blindness metric, termed as “mainlobe fluctuation”, given a duty cycle (proportional to communication throughput) constraint. In particular, MASM is capable of supporting high-throughput communication (∼50% duty cycle) under mild mainlobe fluctuation. Moreover, MASM can be flexibly adapted to frame-level waveform designs by operating on the slow-time scale. In terms of optimal transmit mask design, a set of masks is shown to be ideal in the sense of sidelobe level and mainlobe fluctuation intensity.

Achieving efficient and cost-effective transmit beampattern control for integrated sensing and communication (ISAC) systems is a significant challenge. This paper addresses this by proposing a dual-function radar communication (DFRC) transmitter based on a reconfigurable intelligent surface (RIS) illuminated by a limited number of active sources. We formulate and solve the joint design of source waveforms and RIS phase shifts to match a desired space-frequency radiation pattern, and we evaluate the resulting ISAC system's performance in terms of radar detection probability and data transmission rate. Numerical results demonstrate the promising capabilities of this RIS-enabled transmitter for ISAC applications.

Integrated sensing and communications (ISAC) has emerged as a pivotal enabling technology for next-generation wireless networks. Despite the distinct signal design requirements of sensing and communication (S&C) systems, shifting the symbol-wise pulse shaping (SWiPS) framework from communication-only systems to ISAC poses significant challenges in signal design and processing This paper addresses these challenges by examining the ambiguity function (AF) of the SWiPS ISAC signal and introducing a novel pulse shaping design for single-carrier ISAC transmission. We formulate optimization problems to minimize the average integrated sidelobe level (ISL) of the AF, as well as the weighted ISL (WISL) while satisfying inter-symbol interference (ISI), out-of-band emission (OOBE), and power constraints. Our contributions include establishing the relationship between the AFs of both the random data symbols and signaling pulses, analyzing the statistical characteristics of the AF, and developing algorithmic frameworks for pulse shaping optimization using successive convex approximation (SCA) and alternating direction method of multipliers (ADMM) approaches. Numerical results are provided to validate our theoretical analysis, which demonstrate significant performance improvements in the proposed SWiPS design compared to the root-raised cosine (RRC) pulse shaping for conventional communication systems.

In this work, we consider a backscatter communication system wherein multiple asynchronous sources (tags) exploit the reverberation generated by a nearby radar transmitter as an ambient carrier to deliver a message to a common destination (reader) through a number of available subchannels. We propose a new encoding strategy wherein each tag transmits both pilot and data symbols on each subchannel and repeats some of the data symbols on multiple subchannels. We then exploit this signal structure to derive two semi-blind iterative algorithms for joint estimation of the data symbols and the subchannel responses that are also able to handle some missing measurements. The proposed encoding/decoding strategies are scalable with the number of tags and their payload and can achieve different tradeoffs in terms of transmission and error rates. Some numerical examples are provided to illustrate the merits of the proposed solutions.

Integrated sensing and communications (ISAC) has emerged as a pivotal enabling technology for next-generation wireless networks. Despite the distinct signal design requirements of sensing and communication (S&C) systems, shifting the symbol-wise pulse shaping (SWiPS) framework from communication-only systems to ISAC poses significant challenges in signal design and processing This paper addresses these challenges by examining the ambiguity function (AF) of the SWiPS ISAC signal and introducing a novel pulse shaping design for single-carrier ISAC transmission. We formulate optimization problems to minimize the average integrated sidelobe level (ISL) of the AF, as well as the weighted ISL (WISL) while satisfying inter-symbol interference (ISI), out-of-band emission (OOBE), and power constraints. Our contributions include establishing the relationship between the AFs of both the random data symbols and signaling pulses, analyzing the statistical characteristics of the AF, and developing algorithmic frameworks for pulse shaping optimization using successive convex approximation (SCA) and alternating direction method of multipliers (ADMM) approaches. Numerical results are provided to validate our theoretical analysis, which demonstrate significant performance improvements in the proposed SWiPS design compared to the root-raised cosine (RRC) pulse shaping for conventional communication systems.

Colocated multiple-input multiple-output (MIMO) technology has been widely used in automotive radars as it provides accurate angular estimation of the objects with a relatively small number of transmitting and receiving antennas. Since the Direction Of Departure (DOD) and the Direction Of Arrival (DOA) of line-of-sight targets coincide, MIMO signal processing allows for the formation of a larger virtual array for angle finding. However, multiple paths impinging the receiver is a major limiting factor, in that radar signals may bounce off obstacles, creating echoes for which the DOD does not equal the DOA. Thus, in complex scenarios with multiple scatterers, the direct paths of the intended targets may be corrupted by indirect paths from other objects, which leads to inaccurate angle estimation or ghost targets. In this paper, we focus on detecting the presence of ghosts due to multipath by regarding it as the problem of deciding between a composite hypothesis, ${\cal H}_{0}$ say, that the observations only contain an unknown number of direct paths sharing the same (unknown) DOD's and DOA's, and a composite alternative, ${\cal H}_{1}$ say, that the observations also contain an unknown number of indirect paths, for which DOD's and DOA's do not coincide. We exploit the Generalized Likelihood Ratio Test (GLRT) philosophy to determine the detector structure, offering closed-form expressions for theoretical detection performance, and a convex waveform optimization approach to improve detection performance. In practical scenarios, the unknown parameters of GLRT philosophy are replaced by carefully designed estimators. The angles of both the active direct paths and of the multi-paths are indeed estimated through a sparsity-enforced Compressed Sensing (CS) approach with Levenberg-Marquardt (LM) optimization to estimate the angular parameters in the continuous domain. Simulation and experimental results are finally offered in order to validate the proposed solution.

Reconfigurable Intelligent Surface (RIS) brings a transformative potential to radar systems by providing a new dimension to control electromagnetic waves. This paper focuses on enhancing target detectability through the design and analysis of RIS-aided radar. A comprehensive signal model is established, recognizing both Line of Sight (LoS) and Non-Line of Sight (N-LoS) returns, factoring in RIS location and range gate shifts. This modeling enables an examination of the RIS-dependent effect of enlarged clutter region, underscoring the essential need for precise RIS phase optimization. A joint design problem encompassing transmit waveform, receive filter, and RIS phase is then formulated with the aim to optimize Signal-to-Interference-plus-Noise-Ratio (SINR), complying with practical waveform constraints and discrete RIS phase alphabet. For this nonconvex problem, an iterative algorithm is developed to monotonically enhance SINR, ensuring convergence by alternately updating the radar waveform and RIS phases. Through the majorization-minimization framework, radar waveform updates are achieved using the feasible point pursuit technique, while a quasi-closed form solution is employed for the RIS phases. Simulation results demonstrate the efficacy of the proposed design, revealing the crucial role of RIS in the system.

In this work, we exploit the radar clutter (i.e., the ensemble of echoes generated by the terrain and/or the surrounding objects in response to the signal emitted by a radar transmitter) as a carrier signal to enable an ambient backscatter communication from a source (tag) to a destination (reader). The proposed idea relies on the fact that, since the radar excitation is periodic, the radar clutter is itself periodic over time scales shorter than the coherence time of the environment. Upon deriving a convenient signal model, we propose two encoding/decoding schemes that do not require any coordination with the radar transmitter or knowledge of the radar waveform. Different tradeoffs in terms of transmission rate and error probability can be obtained upon changing the control signal driving the tag switch or the adopted encoding rule; also, multiple tags can be accommodated with either a sourced or an unsourced multiple access strategy. Some illustrative examples are provided.