Hamid Alielahi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hamid Alielahi has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Adampira
Department of Civil Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
11 shared publications - Ali Derakhshan
Department of Civil Engineering, University of Science and Culture, Tehran, Iran
3 shared publications - Mehdi Panji
Department of Civil Engineering, Zanjan Branch, Islamic Azad University, Zanjan, Iran
3 shared publications - Mohsen Kamalian
International Institute of Earthquake Engineering and Seismology
3 shared publications - Zia Addin Nadernia
Department of Civil Engineering, Zanjan Branch, Islamic Azad University, Zanjan, Iran
3 shared publications Damoon Feizi
Department of Civil Engineering, Faculty of Civil and Earth Resources Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran
2 shared publications
Latest Publications
- Open Access
Rigid Inclusions for Soft Soil Improvement: A State-of-the-Art Review of Principles, Design, and Performance
Construction on soft, highly compressible soils increasingly requires reliable ground improvement solutions. Among these, Rigid Inclusions (RIs) have emerged as one of the most efficient soil-reinforcement techniques. This paper synthesizes evidence from over 180 studies to provide a comprehensive state-of-the-art review of RI technology encompassing its governing mechanisms, design methodologies, and field performance. While the static behavior of RI systems has now been extensively studied and is supported by international design guidelines, the response under cyclic and seismic loading, particularly in liquefiable soils, remains less documented and subject to significant uncertainty. This review critically analyzes the degradation of key load-transfer mechanisms including soil arching, membrane tension, and interface shear transfer under repeated loading conditions. It further emphasizes the distinct role of RIs in liquefiable soils, where mitigation relies primarily on reinforcement and confinement rather than on drainage-driven mechanisms typical of granular columns. The evolution of design practice is traced from analytical formulations validated under static conditions toward advanced numerical and physical modeling frameworks suitable for dynamic loading. The lack of validated seismic design guidelines is high-lighted, and critical knowledge gaps are identified, underscoring the need for advanced numerical simulations and large-scale physical testing to support the future development of performance-based seismic design (PBSD) approaches for RI-improved ground.
Open AccessRigid Inclusions for Soft Soil Improvement: A State-of-the-Art Review of Principles, Design, and Performance
Construction on soft, highly compressible soils increasingly requires reliable ground improvement solutions. Among these, Rigid Inclusions (RIs) have emerged as one of the most efficient soil-reinforcement techniques. This paper synthesizes evidence from over 180 studies to provide a comprehensive state-of-the-art review of RI technology encompassing its governing mechanisms, design methodologies, and field performance. While the static behavior of RI systems has now been extensively studied and is supported by international design guidelines, the response under cyclic and seismic loading, particularly in liquefiable soils, remains less documented and subject to significant uncertainty. This review critically analyzes the degradation of key load-transfer mechanisms including soil arching, membrane tension, and interface shear transfer under repeated loading conditions. It further emphasizes the distinct role of RIs in liquefiable soils, where mitigation relies primarily on reinforcement and confinement rather than on drainage-driven mechanisms typical of granular columns. The evolution of design practice is traced from analytical formulations validated under static conditions toward advanced numerical and physical modeling frameworks suitable for dynamic loading. The lack of validated seismic design guidelines is high-lighted, and critical knowledge gaps are identified, underscoring the need for advanced numerical simulations and large-scale physical testing to support the future development of performance-based seismic design (PBSD) approaches for RI-improved ground.
- 1 October 2025
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 56 (10) , 1-22
A Study on 1D and 2D Seismic Site Response Analysis in a Complex Sedimentary Basin: A Case Study
- 1 October 2025
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 56 (10) , 1-22
A Study on 1D and 2D Seismic Site Response Analysis in a Complex Sedimentary Basin: A Case Study
- Open Access
- 21 December 2024
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 12 (1) , 1-22
Efficacy Assessment of Geosynthetic Liners on Seismic Response Mitigation of Slopes
- 21 December 2024
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 12 (1) , 1-22
Open AccessEfficacy Assessment of Geosynthetic Liners on Seismic Response Mitigation of Slopes
- 18 September 2024
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 42 (8) , 7525-7552
Fragility Curves for Seismic Vulnerability of Back-to-Back Mechanically Stabilized Earth Walls
- 18 September 2024
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 42 (8) , 7525-7552
Fragility Curves for Seismic Vulnerability of Back-to-Back Mechanically Stabilized Earth Walls
- 8 May 2024
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 55 (2) , 1031-1043
3D Numerical Modeling of Negative Skin Friction Effects on Tapered Piles in Soft Soils
- 8 May 2024
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 55 (2) , 1031-1043
3D Numerical Modeling of Negative Skin Friction Effects on Tapered Piles in Soft Soils
- 27 November 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 42 (4) , 2475-2493
Exploring the Efficacy of Aluminum Foam as an Innovative Solution to Mitigate Surface Faulting Effects on Shallow Foundations: A Numerical Investigation
- 27 November 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 42 (4) , 2475-2493
Exploring the Efficacy of Aluminum Foam as an Innovative Solution to Mitigate Surface Faulting Effects on Shallow Foundations: A Numerical Investigation
- Open Access
- 16 October 2023
- Published by Springer Nature in Research Square
The Application of Artificial Intelligence Methods on the Optimizing Improvement Depth of Dynamic Compaction
Dynamic Compaction (DC) with tamping is one of the soil improvement methods and has been significantly accepted due to its advantages over other soil improvement methods. In this paper, an attempt has been made to use the fuzzy logic and Sugeno inference system to investigate the effect of the parameters involved in soil improvement operations using the DC method on the relative improvement depth. A correlation has been proposed to estimate the effective depth for the granular soils and compared to the fuzzy results. The Particle Swarm Optimization (PSO) algorithm has been used to achieve maximum improvement depth. The results indicate that the interaction between tamper weight and height of tamping plays the most important role in the design procedures. The results reveal that by using PSO, the maximum depth of improvement is increased by 33%. Studies show that the optimal tamper radius for most of the compaction patterns with medium to high applied energies is equal to 1.5 to 2 meters, the optimal numbers of drops are equal to 25, and the optimal grid spacing is equal to 6 to 7 meters. It should be noted that using PSO dynamic compaction pattern; the maximum improvement depth has been achieved.
- 16 October 2023
- Published by Springer Nature in Research Square
Open AccessThe Application of Artificial Intelligence Methods on the Optimizing Improvement Depth of Dynamic Compaction
Dynamic Compaction (DC) with tamping is one of the soil improvement methods and has been significantly accepted due to its advantages over other soil improvement methods. In this paper, an attempt has been made to use the fuzzy logic and Sugeno inference system to investigate the effect of the parameters involved in soil improvement operations using the DC method on the relative improvement depth. A correlation has been proposed to estimate the effective depth for the granular soils and compared to the fuzzy results. The Particle Swarm Optimization (PSO) algorithm has been used to achieve maximum improvement depth. The results indicate that the interaction between tamper weight and height of tamping plays the most important role in the design procedures. The results reveal that by using PSO, the maximum depth of improvement is increased by 33%. Studies show that the optimal tamper radius for most of the compaction patterns with medium to high applied energies is equal to 1.5 to 2 meters, the optimal numbers of drops are equal to 25, and the optimal grid spacing is equal to 6 to 7 meters. It should be noted that using PSO dynamic compaction pattern; the maximum improvement depth has been achieved.
- Open Access
- 25 January 2023
- Published by Springer Nature in SN Applied Sciences
- Vol. 5 (2) , 1-14
A numerical study on effect of underground cavities on seismic ground response due to Rayleigh wave propagation
Recent studies found that some structural damage can be attributed to the effect of surface waves. A shallow underground structure may be heavily influenced by surface waves, which makes to lose energy over distance more slowly than body waves. This study deals with evaluating the effect of Rayleigh waves (R-waves) interaction with underground cavities on the seismic ground response and amplification pattern using the Finite Element Method (FEM). First, the FEM model was verified to ensure its accuracy. Then, the influences of the effective parameters, such as cavity burial depth, distance from the cavity axis, and dimensionless incident frequency were investigated. Parametric studies revealed that the amplitude of ground motion is greater in the presence of a cavity with respect to that in the free-field condition. It was indicated that shallow cavities cause more amplification than cases with a larger depth ratio. By moving away from the wave source, the response of receiver points has a declining trend. Due to the complex interaction of R-waves with a cavity, the right side of the cavity has less amplitude than the left side. Finally, by increasing the dimensionless incident frequency, the distribution of the surface displacements and wave diffraction patterns gradually becomes more complicated while the peak displacement components decrease. Consequently, in light of the importance of the R-wave interaction with subsurface spaces, the findings of this study can help improve seismic design procedures and seismic microzonation guidelines.
- 25 January 2023
- Published by Springer Nature in SN Applied Sciences
- Vol. 5 (2) , 1-14
Open AccessA numerical study on effect of underground cavities on seismic ground response due to Rayleigh wave propagation
Recent studies found that some structural damage can be attributed to the effect of surface waves. A shallow underground structure may be heavily influenced by surface waves, which makes to lose energy over distance more slowly than body waves. This study deals with evaluating the effect of Rayleigh waves (R-waves) interaction with underground cavities on the seismic ground response and amplification pattern using the Finite Element Method (FEM). First, the FEM model was verified to ensure its accuracy. Then, the influences of the effective parameters, such as cavity burial depth, distance from the cavity axis, and dimensionless incident frequency were investigated. Parametric studies revealed that the amplitude of ground motion is greater in the presence of a cavity with respect to that in the free-field condition. It was indicated that shallow cavities cause more amplification than cases with a larger depth ratio. By moving away from the wave source, the response of receiver points has a declining trend. Due to the complex interaction of R-waves with a cavity, the right side of the cavity has less amplitude than the left side. Finally, by increasing the dimensionless incident frequency, the distribution of the surface displacements and wave diffraction patterns gradually becomes more complicated while the peak displacement components decrease. Consequently, in light of the importance of the R-wave interaction with subsurface spaces, the findings of this study can help improve seismic design procedures and seismic microzonation guidelines.
- 11 December 2022
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 53 (3) , 698-714
Statistical Assessment of Bearing Capacity of Cast-In-Situ Bored Piles Using Direct CPT and SPT Methods: A Case Study
- 11 December 2022
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 53 (3) , 698-714
Statistical Assessment of Bearing Capacity of Cast-In-Situ Bored Piles Using Direct CPT and SPT Methods: A Case Study