Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Joseph H. Koo has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Novel Fiber-Reinforced Polysiloxane Composites: Processing, Characterization, and Modeling for Hypersonic Applications

    by Joseph H. Koo, Yanan Hou, Colin Yee, Steven Kim, Samantha Bernstein, Remy Feru, Ben Rech, Louis A. Pilato

    Novel fiber-reinforced polysiloxane composites (FRPCs) using various fibers infiltrated with a high char yield polysiloxane resin were developed and tested under extreme aerothermal environments. Techneglas manufactures the preceramic polysiloxane resin. FRPCs using glass, silica, carbon, graphite, carbon/polybenzimidazole, alumina, and quartz fibers in different architectures were manufactured by the Koo Research Group. Characterization of thermal stability, flammability, ablation, thermophysical, and mechanical properties of these FRPCs was performed. Thermal stability properties of these FRPCs were characterized using thermogravimetric analysis, and flammability properties using microscale combustion calorimetry. Ablation properties using an oxy-acetylene test bed with advanced diagnostics were performed at several heat fluxes and exposure times. Recession rate, mass loss rate, front surface temperature, and back-face heat-soaked temperature are criteria to compare material performance. The microstructures of these pre- and post-tested FRPCs were investigated using scanning electron microscopy and micro-computed tomography. Thermophysical properties of these FRPCs in virgin and char states were characterized at elevated temperatures. Using these material properties and surface thermochemistry analysis, material response modeling was performed and validated with aerothermal test data. The composites’ tensile, compression, and flexural properties were conducted via ASTM standards. These FRPCs compared favorably with legacy phenolic-based ablatives under similar extreme aerothermal environments.

  • Open Access

    Novel Fiber-Reinforced Polysiloxane Composites: Processing, Characterization, and Modeling for Hypersonic Applications

    by Joseph H. Koo, Yanan Hou, Colin Yee, Steven Kim, Samantha Bernstein, Remy Feru, Ben Rech, Louis A. Pilato

    Fiber-reinforced polysiloxane composites (FRPCs) with glass, silica, carbon, graphite, car-bon/polybenzimidazole, alumina, and quartz fibers in different architectures, infiltrated with a high char yield polysiloxane resin, were developed for hypersonic applications. Techneglas manufactures the polysiloxane resin. FRPCs were manufactured by the Koo Research Group. Material characterization of thermal stability, flammability, ablation, thermophysical, and mechanical properties of these high-performance FRPCs was per-formed. Thermal stability properties were characterized using thermogravimetric analysis, and flammability properties using microscale combustion calorimetry for the FRPCs. Ablation properties using oxy-acetylene test bed with advanced diagnostics were performed at sev-eral heat flux test conditions, exposure times for recession rate, mass loss rate, front surface temperature, and back-face heat-soaked temperature to compare material performance. The microstructures of these FRPCs before and after ablation and mechanical testing were in-vestigated using scanning electron microscopy and micro-computed tomography. Thermophysical properties of the virgin and char FRPC were measured at elevated tem-peratures. Using these material properties and surface thermochemistry analysis, material response modeling was performed and validated with aerothermal test data. Mechanical properties, such as tensile, compression, and flexural were conducted via ASTM stand-ards. The above material properties of these FRPCs compared favorably with several commercial ablatives under similar extreme aerothermal environments.

  • Open Access

    Polymer Nanocomposite Ablatives—Part III

    by Joseph H. Koo, Kaelyn Wagner, Louis A. Pilato, Hao Wu

    Previous reviews by authors indicate the continuing development and improvement of thermal protective systems through the introduction of polymer nanocomposites into polymer matrix composites. These materials perform as thermal protective systems for a variety of aerospace applications, such as thermal protection systems (TPSs), solid rocket motor (SRM) nozzles, internal insulation of SRMs, leading edges of hypersonic vehicles, and missile launch structures. A summary of the most recent global technical research is presented. Polymeric resin systems continue to emphasize phenolic resins and other materials. New high-temperature organic resins based on phthalonitrile and polysiloxane are described and extend the increased temperature range of resin matrix systems. An important technical development relates to the transformation of the resin matrix, primarily phenolic resin, into an aerogel or a nanoporous material that penetrates uniformly within the reinforcing fiber configuration with a corresponding particle size of <100 nm. Furthermore, many of the current papers consider the use of low-density carbon fiber or quartz fiber in the use of low-density felts with high porosity to mimic NASA’s successful use of rigid low-density carbon/phenolic known as phenolic impregnated carbon ablator (PICA). The resulting aerogel composition with low-density non-wovens or felts possesses durability and low density and is extremely effective in providing insulation and preventing heat transfer with low thermal conductivity within the aerogel-modified thermal protective system, resulting in multiple features, such as low-density TPSs, increased thermal stability, improved mechanical properties, especially compressive strength, lower thermal conductivity, improved thermal insulation, reduced ablation recession rate and mass loss, and lower backside temperature. The utility of these TPS materials is being expanded by considering them for infrastructures and ballistics besides aerospace applications.


  • Open Access

    Polymer Nanocomposite Ablatives - Part Iii

    by Joseph H. Koo, Kaelyn Wagner, Louis A Pilato, Hao Wu

    Previous reviews by the authors [1, 2] indicate the continuing development and improvement of thermal protective systems through the introduction of polymer nanocomposites into polymer matrix composites. These materials perform as thermal protective systems for a variety of aerospace applications, such as thermal protection systems (TPS), solid rocket motors (SRM) nozzles, internal insulation of SRM, leading edges of hypersonic vehicles, and missile launch structures. A summary of the most recent, global technical research is presented. Polymeric resin systems continue to emphasize phenolic resins and other materials. New high-temperature organic resins based on phthalonitrile (PN), and polysiloxane are described and extend the increased temperature range of resin matrix systems.

  • Open Access

    Thick-Section Epoxy Composites

    by Yanan Hou, Liguo Li, Joseph H. Koo

    Thick-section composites (TSC) are extensively demanded in many fields, such as aerospace, wind energy, and oil and gas industries. However, the manufacturing process of thick-section thermoset composites (TSSC) encounters significant complexities, such as variations of nonuniform resin flow, exothermal reaction and curing, and dimensional stability through the thickness direction. These process-related nonuniformities are expected to result in through-thickness gradients of mechanical properties and curing-induced deformations, leading to undesirable residual stresses and damage. This chapter introduces the application of TSC and issues related to its manufacturing processes. Methods of TSC are examined and analyzed. Fundamental characteristics of curing kinetics, thermal transfer, and residual stress in TSC will be explained. Research of detailed experiments will be referred for readers for further studies.


  • Development of polyetherimide composites for use as 3D printed thermal protection material

    by Steven Kim, Hao Wu, Alexa Devega, Mallory Sico, William Fahy, John Misasi, Tarik Dickens, Joseph H. Koo


  • Evaluation of additively manufactured ultraperformance polymers to use as thermal protection systems for spacecraft

    by Abdullah Kafi, Hao Wu, Jon Langston, Ozen Atak, Haewon Kim, Steven Kim, William P. Fahy, Roderick Reber, John Misasi, Stuart Bateman, et al.

    In this study, high‐temperature thermoplastic polymers were three‐dimensional (3D) printed and evaluated for ablation performances for the first time. The purpose of this study is to fabricate, test, and evaluate several ultraperformance thermoplastics, including polyetherimide (PEI), polyether ether ketone (PEEK), and poly(ether ketone ketone) (PEKK) for thermal, flammability, and ablation properties using fused filament fabrication. Among all tested materials, PEKK exhibit the highest char yield while the two PEEKs exhibit the highest decomposition temperature. Although PEI have the lowest onset decomposition temperature, microscale combustion calorimetry results indicate that it has the lowest heat release properties. For the 15 s oxyacetylene test bed (OTB) ablation test, all five materials experienced various amount of intumescent or swelling behavior. Samples after 30 s test experienced greater mass loss among which PEKK and ULTEM 9085 shows the highest char yield. Scanning electron microscopy microstructural analysis of the char and pyrolysis zones reveal highly porous char structures caused by the rapid generation of the volatile decomposition products. To fully exploit the experimental data provided by the OTB, the flowfield generated during aerothermal testing using this heat source was modeled. Computational fluid dynamics analysis using Ansys/Fluent 19.1 code was used to the heat transfer between the ablative surface and the combustion gases generated by the OTB and compared with experimental results.


  • POLYMER NANOCOMPOSITE ABLATIVES-PART II

    by Joseph H. Koo, Louis A. Pilato

    A review of recently published literature was conducted to provide a complete picture of the current state of the polymer nanocomposite ablative branch of materials science. These are materials used as thermal protection systems (TPS) for the leading edges of hypersonic vehicles, rocket nozzle and internal insulation of solid rocket motors (SRM), and missile launch facility structures. This paper summarizes the most recent research efforts in this field by scientists globally. The polymers investigated in these papers are primarily phenolic resin, a few epoxy resin, some ethylene propylene diene monomer (EPDM), and a paucity of publications based on hydrogenated nitrile butadiene rubber (HNBR), natural rubber (NR), silicone rubber, and carbon/carbon. A variety of nanoparticles were used, such as nanoclays, graphene, multi-walled carbon nanotubes (MWCNTs), and several nanoceramics. Several microfiber reinforcements were used as well. Ablation mechanisms were studied and proposed by the researchers on their polymer nanocomposite ablatives.