Ivan A. Moreno-Hernandez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ivan A. Moreno-Hernandez has a total of 108 co-authors. Here are the top co-authors by number of shared publications:
- Armand Paul Alivisatos
University of Chicago
10 shared publications - Nathan S. Lewis
California Institute of Technology
9 shared publications - Bruce S. Brunschwig
Beckman Institute, California Institute of Technology, Pasadena, California 91125, United States
8 shared publications - Justin C. Ondry
University of Chicago
6 shared publications - Simon Avery Vigil
Department of Chemistry
6 shared publications - Michelle F. Crook
Department of Chemistry, University of California, Berkeley, California 94720, United States
5 shared publications
Latest Publications
- 26 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (30) , 32041-32052
Activation of Oxygen Evolution Electrocatalysis via Reduced Ruthenium–Oxygen–Ruthenium Coordination
Noble metal oxides such as RuO2 are the state-of-the-art electrocatalysts for anodic reactions in acidic electrolytes, but their scarcity and moderate activity greatly limit emerging renewable energy technologies. Here, we show that oxidized overlayers of ruthenium on earth-abundant manganese oxide (MnO2/o-RuOx) nanocrystal supports exhibit Ru chemical states associated with reduced Ru-O-Ru coordination that enable dynamic switching of hydrogen bonding, with *OH intermediates hydrogen bonding to surface O and *OOH intermediates bonding to protruding RuOx clusters. The resulting electrocatalysts exhibit an overpotential of 218.9 ± 0.3 mV at 10 mA cm-2 for the oxygen evolution reaction in acid, corresponding to a 2425% increase in Ru mass activity compared to RuO2, enabling the construction of electrolyzers that achieved 3 A cm-2 at 1.646 V, 5.54 A cm-2 at 1.8 V, and exhibited over 3000-h stability at 100 mA cm-2. These findings motivate further efforts to develop nanomaterials that harness reduced Ru-O-Ru coordination to enable emerging renewable energy technologies.
- 26 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (30) , 32041-32052
Activation of Oxygen Evolution Electrocatalysis via Reduced Ruthenium–Oxygen–Ruthenium Coordination
Noble metal oxides such as RuO2 are the state-of-the-art electrocatalysts for anodic reactions in acidic electrolytes, but their scarcity and moderate activity greatly limit emerging renewable energy technologies. Here, we show that oxidized overlayers of ruthenium on earth-abundant manganese oxide (MnO2/o-RuOx) nanocrystal supports exhibit Ru chemical states associated with reduced Ru-O-Ru coordination that enable dynamic switching of hydrogen bonding, with *OH intermediates hydrogen bonding to surface O and *OOH intermediates bonding to protruding RuOx clusters. The resulting electrocatalysts exhibit an overpotential of 218.9 ± 0.3 mV at 10 mA cm-2 for the oxygen evolution reaction in acid, corresponding to a 2425% increase in Ru mass activity compared to RuO2, enabling the construction of electrolyzers that achieved 3 A cm-2 at 1.646 V, 5.54 A cm-2 at 1.8 V, and exhibited over 3000-h stability at 100 mA cm-2. These findings motivate further efforts to develop nanomaterials that harness reduced Ru-O-Ru coordination to enable emerging renewable energy technologies.
- Open Access
- 9 June 2026
- Published by American Physical Society (APS) in PRX Energy
- Vol. 5 (2)
Local Structural Coherence and Interfacial Charge Transfer in Cu 2 S / Mo S 2 Heterostructure
Precise control over electronic coupling at nanoscale interfaces is critical for designing materials with tunable charge-transfer behavior and catalytic function. Heterostructures with locally coherent interfaces provide a platform for interrogating interfacial charge redistribution in coupled material systems. Here, we report Cu 2 S / Mo S 2 heterostructures exhibiting nanoscale crystallographic alignment, which are synthesized through a rapid thermal transformation pathway. We employed electrochemical reduction reactions to probe interfacial charge transfer, revealing shifts in product distribution attributable to modified interfacial energetics, even in the absence of optimized catalytic performance. The observed formate Faradaic efficiency suggests that interfacial electronic modulation in the heterostructure shifts product selectivity towards formate, highlighting how interface-driven electronic modulation can direct reaction pathways and influence product selectivity. Optimizing catalyst loading, architecture, and reactor configuration will be critical for future improvement. Structural and compositional integrity were confirmed through powder x-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. Electron transfer between Cu 2 S and Mo S 2 domains was further evaluated by electrochemical impedance spectroscopy, while selected-area electron diffraction revealed local crystallographic alignment consistent with a local epitaxial relationship at the Cu 2 S / Mo S 2 heterointerface. To illustrate the broader applicability of this approach, a Zn S / Mo S 2 heterostructure was also synthesized using the same microwave strategy, confirming the generalizability of interfacial engineering principles across metal sulfide- Mo S 2 systems. Collectively, these findings demonstrate that controlled local epitaxial alignment serves as an effective design principle for tuning interfacial energetics and catalytic reactivity in complex heterostructure materials.
- 9 June 2026
- Published by American Physical Society (APS) in PRX Energy
- Vol. 5 (2)
Open AccessLocal Structural Coherence and Interfacial Charge Transfer in Cu 2 S / Mo S 2 Heterostructure
Precise control over electronic coupling at nanoscale interfaces is critical for designing materials with tunable charge-transfer behavior and catalytic function. Heterostructures with locally coherent interfaces provide a platform for interrogating interfacial charge redistribution in coupled material systems. Here, we report Cu 2 S / Mo S 2 heterostructures exhibiting nanoscale crystallographic alignment, which are synthesized through a rapid thermal transformation pathway. We employed electrochemical reduction reactions to probe interfacial charge transfer, revealing shifts in product distribution attributable to modified interfacial energetics, even in the absence of optimized catalytic performance. The observed formate Faradaic efficiency suggests that interfacial electronic modulation in the heterostructure shifts product selectivity towards formate, highlighting how interface-driven electronic modulation can direct reaction pathways and influence product selectivity. Optimizing catalyst loading, architecture, and reactor configuration will be critical for future improvement. Structural and compositional integrity were confirmed through powder x-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. Electron transfer between Cu 2 S and Mo S 2 domains was further evaluated by electrochemical impedance spectroscopy, while selected-area electron diffraction revealed local crystallographic alignment consistent with a local epitaxial relationship at the Cu 2 S / Mo S 2 heterointerface. To illustrate the broader applicability of this approach, a Zn S / Mo S 2 heterostructure was also synthesized using the same microwave strategy, confirming the generalizability of interfacial engineering principles across metal sulfide- Mo S 2 systems. Collectively, these findings demonstrate that controlled local epitaxial alignment serves as an effective design principle for tuning interfacial energetics and catalytic reactivity in complex heterostructure materials.
- 3 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (7) , 7102-7112
Direct Observation of Collective Dissolution Mechanisms in Iridium Oxide Nanocrystals
Iridium oxide (IrO2) is the state-of-the-art electrocatalyst for water oxidation in electrolyzers, yet it suffers from instability under operating conditions. Here, we combine first-principles modeling with in situ liquid-phase transmission electron microscopy and device-scale characterization to resolve the atomic-scale morphology and dissolution dynamics of IrO2 nanocrystals. Our computational Wulff constructions uniquely incorporate high-index facets, providing new insights into thermodynamic facet-dependent stability under operating conditions. Atomically resolved studies reveal multiple distinct collective dissolution pathways, including high-index facet formation, monolayer reconstruction, step-edge formation, and monolayer delamination on {110} surfaces. Device-scale studies confirm that electrochemical operation results in high-index facet formation. Ab initio molecular dynamics simulations further show that initial dissolution kinetics are facet-dependent. These findings highlight how combining in situ imaging with first-principles modeling reveals atomic-scale dynamics that influence material performance.
- 3 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (7) , 7102-7112
Direct Observation of Collective Dissolution Mechanisms in Iridium Oxide Nanocrystals
Iridium oxide (IrO2) is the state-of-the-art electrocatalyst for water oxidation in electrolyzers, yet it suffers from instability under operating conditions. Here, we combine first-principles modeling with in situ liquid-phase transmission electron microscopy and device-scale characterization to resolve the atomic-scale morphology and dissolution dynamics of IrO2 nanocrystals. Our computational Wulff constructions uniquely incorporate high-index facets, providing new insights into thermodynamic facet-dependent stability under operating conditions. Atomically resolved studies reveal multiple distinct collective dissolution pathways, including high-index facet formation, monolayer reconstruction, step-edge formation, and monolayer delamination on {110} surfaces. Device-scale studies confirm that electrochemical operation results in high-index facet formation. Ab initio molecular dynamics simulations further show that initial dissolution kinetics are facet-dependent. These findings highlight how combining in situ imaging with first-principles modeling reveals atomic-scale dynamics that influence material performance.
- 15 November 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (23) , 19810-19822
Advancing Electrocatalyst Design Principles via Liquid-Phase Transmission Electron Microscopy
- 15 November 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (23) , 19810-19822
Advancing Electrocatalyst Design Principles via Liquid-Phase Transmission Electron Microscopy
- Open Access
- 11 July 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (16) , 8029-8038
Understanding the reaction energetics of oxygen-evolving electrocatalysts
Electrocatalysts are crucial for efficient electrochemical devices that enable sustainable chemical transformations. Electrocatalyst activity has been correlated to the thermodynamics of reaction intermediates that balance intermediate formation and desorption. However, a lack of detailed experimental thermodynamic information about reaction energetics limits the design of next-generation electrocatalysts. Here we show kinetic and electroadsorption studies of precisely terminated first-row transition metal ruthenium oxide nanocrystals that elucidate how material chemistry influences the oxygen evolution reaction activity and reaction energetics. We established the energy scaling relations between the *OH, *O, and *OOH intermediates involved in the oxygen evolution reaction. These energy scaling relations were leveraged to design an FeMnRuOx electrocatalyst with an 876% increase in mass activity compared to RuO2. Our study highlights the potential for precise nanocrystal synthesis and electroadsorption analysis to rationally guide the design of next-generation electrocatalysts with improved activity and further elucidate mechanisms of catalyst activation.
- 11 July 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (16) , 8029-8038
Open AccessUnderstanding the reaction energetics of oxygen-evolving electrocatalysts
Electrocatalysts are crucial for efficient electrochemical devices that enable sustainable chemical transformations. Electrocatalyst activity has been correlated to the thermodynamics of reaction intermediates that balance intermediate formation and desorption. However, a lack of detailed experimental thermodynamic information about reaction energetics limits the design of next-generation electrocatalysts. Here we show kinetic and electroadsorption studies of precisely terminated first-row transition metal ruthenium oxide nanocrystals that elucidate how material chemistry influences the oxygen evolution reaction activity and reaction energetics. We established the energy scaling relations between the *OH, *O, and *OOH intermediates involved in the oxygen evolution reaction. These energy scaling relations were leveraged to design an FeMnRuOx electrocatalyst with an 876% increase in mass activity compared to RuO2. Our study highlights the potential for precise nanocrystal synthesis and electroadsorption analysis to rationally guide the design of next-generation electrocatalysts with improved activity and further elucidate mechanisms of catalyst activation.
- 22 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Oxidized Overlayers of Ruthenium and Iridium as Electrocatalysts for Anodic Reactions
Renewable energy technologies often rely on rutile tetravalent oxides, such as ruthenium(IV) oxide and iridium(IV) oxide, to catalyze anodic reactions that are paired with fuel formation. Herein, we report the synthesis of angstrom-scale and nanoscale oxidized overlayers of ruthenium (o-RuOx) and iridium (o-IrOx) from simple aqueous precursors grown on earth-abundant supports and state-of-the-art oxide electrocatalysts. The resulting overlayers exhibit distinct redox features and chemical states as indicated by cyclic voltammetry, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy. The electrocatalysts exhibit increased activity towards anodic reactions. In particular, annealed o-RuOx grown on TiO2 (a-TiO2/o-RuOx) results in an electrocatalyst with an overpotential of 213, 206, and 14 mV at 10 mA cm-2 for the oxygen evolution reaction (OER) in acid, the OER in base, and the chlorine evolution reaction, respectively. The activity of a-TiO2/o-RuOx corresponds to a 47.7×, 117.4×, and 1.3× increase in ruthenium mass activity compared to RuO2 towards the OER in acid, the OER in base, and the chlorine evolution reaction, respectively. These findings highlight the unique chemistry of oxidized overlayers and their potential to meet operational demands for renewable energy technologies.
- 22 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Oxidized Overlayers of Ruthenium and Iridium as Electrocatalysts for Anodic Reactions
Renewable energy technologies often rely on rutile tetravalent oxides, such as ruthenium(IV) oxide and iridium(IV) oxide, to catalyze anodic reactions that are paired with fuel formation. Herein, we report the synthesis of angstrom-scale and nanoscale oxidized overlayers of ruthenium (o-RuOx) and iridium (o-IrOx) from simple aqueous precursors grown on earth-abundant supports and state-of-the-art oxide electrocatalysts. The resulting overlayers exhibit distinct redox features and chemical states as indicated by cyclic voltammetry, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy. The electrocatalysts exhibit increased activity towards anodic reactions. In particular, annealed o-RuOx grown on TiO2 (a-TiO2/o-RuOx) results in an electrocatalyst with an overpotential of 213, 206, and 14 mV at 10 mA cm-2 for the oxygen evolution reaction (OER) in acid, the OER in base, and the chlorine evolution reaction, respectively. The activity of a-TiO2/o-RuOx corresponds to a 47.7×, 117.4×, and 1.3× increase in ruthenium mass activity compared to RuO2 towards the OER in acid, the OER in base, and the chlorine evolution reaction, respectively. These findings highlight the unique chemistry of oxidized overlayers and their potential to meet operational demands for renewable energy technologies.
- Open Access
- 15 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (21) , 18155-18165
Heterointercalation in Chevrel-Phase Sulfides: A Model Periodic Solid for the Investigation of Chain Electron Transfer
Modulation of electron density localization on periodic crystal solids through electron transfer from interstitial cations can directly influence the bonding configurations of small-molecule intermediates at the catalyst binding site. This study presents the microwave-assisted solid-state synthesis of four heterointercalant Chevrel-phase (CP) sulfides with varying metal cation intercalants with compositional and electronic structure investigations of the electron density redistribution as a result of intercalation. The heterointercalant CP sulfides, with the general formula CuxMyMo6S8 (where M = Cr, Mn, Fe, Ni; x, y = 1.5-2.5), are presented here for the probe reaction of electrochemical CO2 reduction. A change in product selectivity is observed toward the production of methanol at low overpotentials of -0.5 V vs reversible hydrogen electrode (RHE), as a result of the intercalant combination present within the CP interstitial cavity. Structural confirmation of all materials was examined through Rietveld refinement of the powder X-ray diffraction (PXRD) data, high-resolution transmission electron microscopy (HR-TEM), and selected-area electron diffraction (SAED). Electron transfer from the intercalated metal cations to the Mo6S8 cluster was investigated via X-ray photoelectron spectroscopy (XPS) of the intercalated metal cations and the chalcogenide cluster. Electron transfer was further confirmed through X-ray absorption analysis (XAS) of the K-edges of Mo and intercalants. Intermediate studies of electrochemical reduction of formaldehyde to methanol resulted in a faradaic efficiency of ∼78% methanol production on CuxNiyMo6S8. The results presented herein identify distinct principles for materials design that can be utilized in other compositional spaces within the broad families of periodic crystal solids.
- 15 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (21) , 18155-18165
Open AccessHeterointercalation in Chevrel-Phase Sulfides: A Model Periodic Solid for the Investigation of Chain Electron Transfer
Modulation of electron density localization on periodic crystal solids through electron transfer from interstitial cations can directly influence the bonding configurations of small-molecule intermediates at the catalyst binding site. This study presents the microwave-assisted solid-state synthesis of four heterointercalant Chevrel-phase (CP) sulfides with varying metal cation intercalants with compositional and electronic structure investigations of the electron density redistribution as a result of intercalation. The heterointercalant CP sulfides, with the general formula CuxMyMo6S8 (where M = Cr, Mn, Fe, Ni; x, y = 1.5-2.5), are presented here for the probe reaction of electrochemical CO2 reduction. A change in product selectivity is observed toward the production of methanol at low overpotentials of -0.5 V vs reversible hydrogen electrode (RHE), as a result of the intercalant combination present within the CP interstitial cavity. Structural confirmation of all materials was examined through Rietveld refinement of the powder X-ray diffraction (PXRD) data, high-resolution transmission electron microscopy (HR-TEM), and selected-area electron diffraction (SAED). Electron transfer from the intercalated metal cations to the Mo6S8 cluster was investigated via X-ray photoelectron spectroscopy (XPS) of the intercalated metal cations and the chalcogenide cluster. Electron transfer was further confirmed through X-ray absorption analysis (XAS) of the K-edges of Mo and intercalants. Intermediate studies of electrochemical reduction of formaldehyde to methanol resulted in a faradaic efficiency of ∼78% methanol production on CuxNiyMo6S8. The results presented herein identify distinct principles for materials design that can be utilized in other compositional spaces within the broad families of periodic crystal solids.
- 15 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (16) , 7612-7624
Understanding Electrochemical Degradation via Liquid Phase Transmission Electron Microscopy
- 15 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (16) , 7612-7624
Understanding Electrochemical Degradation via Liquid Phase Transmission Electron Microscopy
- Open Access
- 10 April 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (16) , 11133-11140
Dissolution Heterogeneity Observed in Anisotropic Ruthenium Dioxide Nanocrystals via Liquid-Phase Transmission Electron Microscopy
Noble metal oxides such as ruthenium dioxide are highly active electrocatalysts for anodic reactions in acidic electrolytes, but dissolution during electrochemical operation impedes wide-scale applications in renewable energy technologies. Improving the fundamental understanding of the dissolution dynamics of application-relevant morphologies such as nanocrystals is critical for the grid-scale implementation of these materials. Herein, we report the nanoscale heterogeneity observed via liquid-phase transmission electron microscopy during ruthenium dioxide nanocrystal dissolution under oxidizing conditions. Single-crystalline ruthenium dioxide nanocrystals enabled the direct observation of dissolution along different crystallographic facets, allowing an unprecedented direct comparison of crystal facet stability. The nanoscale observations revealed substantial heterogeneity in the relative stability of crystallographic facets across different nanocrystals, attributed to the nanoscale strains present in these crystals. These findings highlight the importance of nanoscale heterogeneity in determining macroscale properties such as electrocatalyst stability and provide a characterization methodology that can be integrated into next-generation electrocatalyst discovery efforts.
- 10 April 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (16) , 11133-11140
Open AccessDissolution Heterogeneity Observed in Anisotropic Ruthenium Dioxide Nanocrystals via Liquid-Phase Transmission Electron Microscopy
Noble metal oxides such as ruthenium dioxide are highly active electrocatalysts for anodic reactions in acidic electrolytes, but dissolution during electrochemical operation impedes wide-scale applications in renewable energy technologies. Improving the fundamental understanding of the dissolution dynamics of application-relevant morphologies such as nanocrystals is critical for the grid-scale implementation of these materials. Herein, we report the nanoscale heterogeneity observed via liquid-phase transmission electron microscopy during ruthenium dioxide nanocrystal dissolution under oxidizing conditions. Single-crystalline ruthenium dioxide nanocrystals enabled the direct observation of dissolution along different crystallographic facets, allowing an unprecedented direct comparison of crystal facet stability. The nanoscale observations revealed substantial heterogeneity in the relative stability of crystallographic facets across different nanocrystals, attributed to the nanoscale strains present in these crystals. These findings highlight the importance of nanoscale heterogeneity in determining macroscale properties such as electrocatalyst stability and provide a characterization methodology that can be integrated into next-generation electrocatalyst discovery efforts.
- 17 March 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (29)
Toward One‐Way Smoke: Synthesis of Copper‐Based Microclubs with Asymmetric Scattering and Absorption
The ultimate goal of this work is to create an engineered aerosol that acts as one‐way smoke, i.e. it creates an asymmetric vision environment in which the ability to image objects depends on the viewing direction. To this end, a rapid, one‐pot synthesis of copper‐based microclubs is developed that consists of a Cu2O octahedron attached to a Cu2O@Cu shaft. Millions of synthesized particles are analyzed in minutes with a FlowCam to provide a robust statistical analysis of their geometry, and rapidly elucidate the roles of the reaction constituents on the particle shape and yield. The combination of asymmetry in both shape and composition introduces a 30% difference in scattering of light propagating parallel to the microclub axis from opposing directions. This work represents a first step toward the creation of an asymmetric imaging environment with an aerosol consisting of acoustically aligned microclubs.
- 17 March 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (29)
Toward One‐Way Smoke: Synthesis of Copper‐Based Microclubs with Asymmetric Scattering and Absorption
The ultimate goal of this work is to create an engineered aerosol that acts as one‐way smoke, i.e. it creates an asymmetric vision environment in which the ability to image objects depends on the viewing direction. To this end, a rapid, one‐pot synthesis of copper‐based microclubs is developed that consists of a Cu2O octahedron attached to a Cu2O@Cu shaft. Millions of synthesized particles are analyzed in minutes with a FlowCam to provide a robust statistical analysis of their geometry, and rapidly elucidate the roles of the reaction constituents on the particle shape and yield. The combination of asymmetry in both shape and composition introduces a 30% difference in scattering of light propagating parallel to the microclub axis from opposing directions. This work represents a first step toward the creation of an asymmetric imaging environment with an aerosol consisting of acoustically aligned microclubs.