Matthias Grube
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Matthias Grube has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Thomas Mikolajick
NaMLAb gGmbH Dresden Germany
21 shared publications - Walter Michael Weber
Institute of Solid State Electronics TU Wien Vienna Austria
17 shared publications Dominik Martin
NaMLab gGmbH Dresden, Germany
8 shared publicationsHenning Riechert
Paul Drude Institute for Solid State Electronics 3 , 10117 Berlin, Germany
8 shared publicationsJens Trommer
NaMLab gGmbH Noethnitzer Strasse 64 01187 Dresden Germany
5 shared publicationsAndre Heinzig
Center for Advancing Electronics Dresden (cfaed), Dresden, Germany
4 shared publications
Latest Publications
- Open Access
- 16 February 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (6)
Modulation of Oxygen Content and Ferroelectricity in Sputtered Hafnia‐Zirconia by Engineering of Tungsten Oxide Bottom Electrodes
The well‐developed high‐k technologies ease the integration complexity for HfO2‐based ferroelectric (FE) devices in the complementary metal‐oxide semiconductor processes. Sputtered HfxZr(1‐x)O2 (HZO) FEs have proven their thermal compatibility in back‐end‐of‐line (BEOL) integration processes with high remanent polarization (Pr) and a high cycling endurance. With the help of a tungsten oxide (WOx) bottom electrode, the sputtered HZO's FE properties are further advanced in this work. WOx is used to tune the oxygen content in the HZO film, providing an FE performance with a maximum 2Pr of 46 µC cm−2 and an endurance of 108 cycles. Based on this, sputtered HZO can compete with the atomic layer deposited HZO in the BEOL processes. In addition, WOx bottom electrodes enhance the FE capacitor behavior in a broad processing window, which relaxes the manufacturing restrictions.
- 16 February 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (6)
Open AccessModulation of Oxygen Content and Ferroelectricity in Sputtered Hafnia‐Zirconia by Engineering of Tungsten Oxide Bottom Electrodes
The well‐developed high‐k technologies ease the integration complexity for HfO2‐based ferroelectric (FE) devices in the complementary metal‐oxide semiconductor processes. Sputtered HfxZr(1‐x)O2 (HZO) FEs have proven their thermal compatibility in back‐end‐of‐line (BEOL) integration processes with high remanent polarization (Pr) and a high cycling endurance. With the help of a tungsten oxide (WOx) bottom electrode, the sputtered HZO's FE properties are further advanced in this work. WOx is used to tune the oxygen content in the HZO film, providing an FE performance with a maximum 2Pr of 46 µC cm−2 and an endurance of 108 cycles. Based on this, sputtered HZO can compete with the atomic layer deposited HZO in the BEOL processes. In addition, WOx bottom electrodes enhance the FE capacitor behavior in a broad processing window, which relaxes the manufacturing restrictions.
- Open Access
- 18 January 2022
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 16 (10)
Assessment of Back‐End‐of‐Line Compatibility of Sputtered HfO2‐Based Ferroelectrics
The thermal compatibility of fully sputtered, ferroelectric TiN/HfxZr(1−x)O2/TiN thin‐film capacitors with back‐end‐of‐line processing is investigated. The sputtering power, ZrO2 concentration, and annealing temperature affect the crystal structure and ferroelectric properties of HfxZr(1−x)O2 (HZO) in different ways, which is revealed by the grazing incidence X‐ray diffraction and electric characterization. Moderate sputtering power and ZrO2 content favor the orthorhombic phase and higher remanent polarization. In contrast, low and high power or low and high ZrO2 concentrations increase the monoclinic and tetragonal/cubic phase fractions, respectively. For the first time, it is shown that annealing at 400 °C for 1 h can result in fully crystalline HZO films deposited by physical vapor deposition. Even pure HfO2 deposited from a 3 in. target with a sputtering power of 50 W exhibits some ferroelectric response after annealing at 400 °C and wakeup cycling.
- 18 January 2022
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 16 (10)
Open AccessAssessment of Back‐End‐of‐Line Compatibility of Sputtered HfO2‐Based Ferroelectrics
The thermal compatibility of fully sputtered, ferroelectric TiN/HfxZr(1−x)O2/TiN thin‐film capacitors with back‐end‐of‐line processing is investigated. The sputtering power, ZrO2 concentration, and annealing temperature affect the crystal structure and ferroelectric properties of HfxZr(1−x)O2 (HZO) in different ways, which is revealed by the grazing incidence X‐ray diffraction and electric characterization. Moderate sputtering power and ZrO2 content favor the orthorhombic phase and higher remanent polarization. In contrast, low and high power or low and high ZrO2 concentrations increase the monoclinic and tetragonal/cubic phase fractions, respectively. For the first time, it is shown that annealing at 400 °C for 1 h can result in fully crystalline HZO films deposited by physical vapor deposition. Even pure HfO2 deposited from a 3 in. target with a sputtering power of 50 W exhibits some ferroelectric response after annealing at 400 °C and wakeup cycling.
- 1 September 2020
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 215, 110651
Al2O3-TiOx as full area passivating contacts for silicon surfaces utilizing oxygen scavenging titanium interlayers
- 1 September 2020
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 215, 110651
Al2O3-TiOx as full area passivating contacts for silicon surfaces utilizing oxygen scavenging titanium interlayers
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2176-2179
Towards Full-area Passivating Contacts for Silicon Surfaces based on Al2O3-TiOx Double Layers
In order to remove the local openings for contacting PERC Solar cells, one has to introduce passivating contacts. The Al 2 O 3 -TiO x double layer stack is an attractive candidate for this purpose. This study will guide a way to enhance the conductivity of those contacts by doping TiO x with a. Additionally, it is shown, that major parts of the stacks are deposited by sputtering. This demonstrates a higher feasibility for industrial applications than atomic layer deposition as reported earlier [1], [2].
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2176-2179
Towards Full-area Passivating Contacts for Silicon Surfaces based on Al2O3-TiOx Double Layers
In order to remove the local openings for contacting PERC Solar cells, one has to introduce passivating contacts. The Al 2 O 3 -TiO x double layer stack is an attractive candidate for this purpose. This study will guide a way to enhance the conductivity of those contacts by doping TiO x with a. Additionally, it is shown, that major parts of the stacks are deposited by sputtering. This demonstrates a higher feasibility for industrial applications than atomic layer deposition as reported earlier [1], [2].
- 11 December 2017
- Published by Wiley in Advanced Electronic Materials
- Vol. 4 (1)
Reconfigurable Si Nanowire Nonvolatile Transistors
Reconfigurable transistors merge unipolar p‐ and n‐type characteristics of field‐effect transistors into a single programmable device. Combinational circuits have shown benefits in area and power consumption by fine‐grain reconfiguration of complete logic blocks at runtime. To complement this volatile programming technology, a proof of concept for individually addressable reconfigurable nonvolatile transistors is presented. A charge‐trapping stack is incorporated, and four distinct and stable states in a single device are demonstrated.
- 11 December 2017
- Published by Wiley in Advanced Electronic Materials
- Vol. 4 (1)
Reconfigurable Si Nanowire Nonvolatile Transistors
Reconfigurable transistors merge unipolar p‐ and n‐type characteristics of field‐effect transistors into a single programmable device. Combinational circuits have shown benefits in area and power consumption by fine‐grain reconfiguration of complete logic blocks at runtime. To complement this volatile programming technology, a proof of concept for individually addressable reconfigurable nonvolatile transistors is presented. A charge‐trapping stack is incorporated, and four distinct and stable states in a single device are demonstrated.
- Open Access
- 20 June 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 27982
High Area Capacity Lithium-Sulfur Full-cell Battery with Prelitiathed Silicon Nanowire-Carbon Anodes for Long Cycling Stability
We show full Li/S cells with the use of balanced and high capacity electrodes to address high power electro-mobile applications. The anode is made of an assembly comprising of silicon nanowires as active material densely and conformally grown on a 3D carbon mesh as a light-weight current collector, offering extremely high areal capacity for reversible Li storage of up to 9 mAh/cm2. The dense growth is guaranteed by a versatile Au precursor developed for homogenous Au layer deposition on 3D substrates. In contrast to metallic Li, the presented system exhibits superior characteristics as an anode in Li/S batteries such as safe operation, long cycle life and easy handling. These anodes are combined with high area density S/C composite cathodes into a Li/S full-cell with an ether- and lithium triflate-based electrolyte for high ionic conductivity. The result is a highly cyclable full-cell with an areal capacity of 2.3 mAh/cm2, a cyclability surpassing 450 cycles and capacity retention of 80% after 150 cycles (capacity loss <0.4% per cycle). A detailed physical and electrochemical investigation of the SiNW Li/S full-cell including in-operando synchrotron X-ray diffraction measurements reveals that the lower degradation is due to a lower self-reduction of polysulfides after continuous charging/discharging.
- 20 June 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 27982
Open AccessHigh Area Capacity Lithium-Sulfur Full-cell Battery with Prelitiathed Silicon Nanowire-Carbon Anodes for Long Cycling Stability
We show full Li/S cells with the use of balanced and high capacity electrodes to address high power electro-mobile applications. The anode is made of an assembly comprising of silicon nanowires as active material densely and conformally grown on a 3D carbon mesh as a light-weight current collector, offering extremely high areal capacity for reversible Li storage of up to 9 mAh/cm2. The dense growth is guaranteed by a versatile Au precursor developed for homogenous Au layer deposition on 3D substrates. In contrast to metallic Li, the presented system exhibits superior characteristics as an anode in Li/S batteries such as safe operation, long cycle life and easy handling. These anodes are combined with high area density S/C composite cathodes into a Li/S full-cell with an ether- and lithium triflate-based electrolyte for high ionic conductivity. The result is a highly cyclable full-cell with an areal capacity of 2.3 mAh/cm2, a cyclability surpassing 450 cycles and capacity retention of 80% after 150 cycles (capacity loss <0.4% per cycle). A detailed physical and electrochemical investigation of the SiNW Li/S full-cell including in-operando synchrotron X-ray diffraction measurements reveals that the lower degradation is due to a lower self-reduction of polysulfides after continuous charging/discharging.
- 3 December 2015
- Published by The Electrochemical Society in ECS Transactions
- Vol. 70 (1) , 69-78
Comparison of Silicon Nanowire Growth on SiO2 and on Carbon Substrates
Silicon nanowires have emerged as a cheap and efficient technology for nanostructured Si necessary for electronic devices as well as anode material in Li battery technology. They are typically grown via the vapor-liquid-solid mechanism and gold nanoparticles used as catalyst. Here we compare the CVD growth of those silicon nanowires on different substrates, namely Si with 130 nm SiO2 as well as on a carbon surface. The presence of carbon does change the typical characteristics of single crystalline growth to more amorphous or polycrystalline growth regardless of different process conditions typically varied to get optimal nanowire growth.
- 3 December 2015
- Published by The Electrochemical Society in ECS Transactions
- Vol. 70 (1) , 69-78
Comparison of Silicon Nanowire Growth on SiO2 and on Carbon Substrates
Silicon nanowires have emerged as a cheap and efficient technology for nanostructured Si necessary for electronic devices as well as anode material in Li battery technology. They are typically grown via the vapor-liquid-solid mechanism and gold nanoparticles used as catalyst. Here we compare the CVD growth of those silicon nanowires on different substrates, namely Si with 130 nm SiO2 as well as on a carbon surface. The presence of carbon does change the typical characteristics of single crystalline growth to more amorphous or polycrystalline growth regardless of different process conditions typically varied to get optimal nanowire growth.
- 27 February 2015
- Published by Springer Nature in MRS Proceedings
- Vol. 1751
Stability and Performance of Heterogeneous Anode Assemblies of Silicon Nanowires on Carbon Meshes for Lithium-Sulfur Battery Applications
Si is a promising anode material for Li storage due to its high theoretical specific capacity surpassing 4200 Ah/kg. Si based anodes exhibit an extreme instability upon electrochemical incorporation of Li given the accompanied large volume expansion of about 400%. We show innovative anode assemblies composed of a forest of free standing Si nanowires conformally integrated on carbon meshes. The morphology of silicon nanowires allows a volume expansion and compression lowering strain incorporation. In this paper, we demonstrate the utilization of SiNW grown on top of a current collector made of a carbon fiber network. This leads to an increase of stability of Si with a remaining effective capacitance above 2000 Ah/kg(Si) after 225 full charge/discharge cycles. This is significantly better compared to previous results shown in literature. The anodes are fabricated by a simple and inexpensive method promising for a transfer into industrial integration.
- 27 February 2015
- Published by Springer Nature in MRS Proceedings
- Vol. 1751
Stability and Performance of Heterogeneous Anode Assemblies of Silicon Nanowires on Carbon Meshes for Lithium-Sulfur Battery Applications
Si is a promising anode material for Li storage due to its high theoretical specific capacity surpassing 4200 Ah/kg. Si based anodes exhibit an extreme instability upon electrochemical incorporation of Li given the accompanied large volume expansion of about 400%. We show innovative anode assemblies composed of a forest of free standing Si nanowires conformally integrated on carbon meshes. The morphology of silicon nanowires allows a volume expansion and compression lowering strain incorporation. In this paper, we demonstrate the utilization of SiNW grown on top of a current collector made of a carbon fiber network. This leads to an increase of stability of Si with a remaining effective capacitance above 2000 Ah/kg(Si) after 225 full charge/discharge cycles. This is significantly better compared to previous results shown in literature. The anodes are fabricated by a simple and inexpensive method promising for a transfer into industrial integration.
- 1 December 2014
- Published by Elsevier in Solid-State Electronics
- Vol. 102, 12-24
Reconfigurable nanowire electronics – A review
- 1 December 2014
- Published by Elsevier in Solid-State Electronics
- Vol. 102, 12-24
Reconfigurable nanowire electronics – A review
- 13 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 13 (6) , 1020-1028
Reconfigurable Nanowire Electronics-Enabling a Single CMOS Circuit Technology
Reconfigurable nanowire transistors are multifunctional switches that fuse the electrical characteristics of unipolar n- and p-type field effect transistors (FETs) into a single universal type of four-terminal device. In addition to the three known FET electrodes the fourth acts as an electric select signal that dynamically programs the desired polarity. The transistor consists of two independent charge carrier injection valves as realized by two gated Schottky junctions integrated within an intrinsic silicon nanowire. The transport properties that provide unipolar n- and p-type behavior will be elucidated. Further, solutions to the major device challenges toward the implementation of these novel transistors at the circuit level are proposed, by exploiting specific nanowire geometries and dimensions. These include methods that deliver equal on-currents and symmetric transfer characteristics for n- and p-type, and that eliminate supra-linear output characteristics at low source-drain biases. We will further show that circuits built of these symmetric transistors successfully exhibit complementary operation. Finally, the prospects in building reconfigurable circuits and systems will be briefly summarized.
- 13 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 13 (6) , 1020-1028
Reconfigurable Nanowire Electronics-Enabling a Single CMOS Circuit Technology
Reconfigurable nanowire transistors are multifunctional switches that fuse the electrical characteristics of unipolar n- and p-type field effect transistors (FETs) into a single universal type of four-terminal device. In addition to the three known FET electrodes the fourth acts as an electric select signal that dynamically programs the desired polarity. The transistor consists of two independent charge carrier injection valves as realized by two gated Schottky junctions integrated within an intrinsic silicon nanowire. The transport properties that provide unipolar n- and p-type behavior will be elucidated. Further, solutions to the major device challenges toward the implementation of these novel transistors at the circuit level are proposed, by exploiting specific nanowire geometries and dimensions. These include methods that deliver equal on-currents and symmetric transfer characteristics for n- and p-type, and that eliminate supra-linear output characteristics at low source-drain biases. We will further show that circuits built of these symmetric transistors successfully exhibit complementary operation. Finally, the prospects in building reconfigurable circuits and systems will be briefly summarized.