AVAnjeet Verma

Anjeet Verma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anjeet Verma has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • CAPSA Based Control for Power Quality Correction in PV Array Integrated EVCS Operating in Standalone and Grid Connected Modes

    by Anjeet Verma, Bhim Singh

    In this paper, a solar PV (Photo Voltaic) array and a storage battery integrated three phase electric vehicle charging station (EVCS) is presented, which uses a convex combined affine projection sign algorithm (CAPSA) for improving the power quality at the grid. This algorithm convexly combines the output of two APSA with large step size and small step size. Therefore, this algorithm achieves fast convergence and low steady-state error in abruptly changing input conditions. Therefore, this algorithm is suitable for an EV charging station, where the charging current of EV changes frequently. The EVCS provides both AC and DC charging to EVs. In the daytime, the charging station operates in standalone mode to charge the EV connected at the point of common interconnection (PCI). However, the EV requiring DC power can take power from the DC link through a bidirectional DC-DC converter. Whereas, in the absence of PV array generation, the CS takes power from the grid. Moreover, while connecting the CS to the grid, the PCI voltage is synchronized to the grid voltage for achieving the seamless mode transition. Various steady-state and dynamic condition results have been taken on the experimental prototype developed in the laboratory for demonstrating its satisfactory behavior.


  • AFF-SOGI-DRC Control of Renewable Energy Based Grid Interactive Charging Station for EV With Power Quality Improvement

    by Anjeet Verma, Bhim Singh

    In this paper, a control of solar photovoltaic (PV) array, and wind energy conversion system (WECS) based charging station using an adaptive frequency fixed second order generalized integrator with DC offset rejection capability (AFF-SOGI-DRC), is presented for charging the electric vehicle (EVs) and improving the power quality of the grid. In comparison to SOGI-based algorithm, wherein a frequency feedback loop reduces the stability margin and FF-SOGI-based algorithm, where a double frequency oscillation and offset error constraint the algorithm capability, the presented algorithm precisely estimates the fundamental EV current. Moreover, the AFF-SOGI-DRC based positive sequence extractor helps in generating the sinusoidal in-quadrature unit vectors under distorted and unbalanced grid voltages; therefore, the reference grid currents become harmonic free. The charging station is operated in grid connected mode (GCM) and islanded mode (IM) to utilize the renewable energy maximally. The control of the charging station also includes the voltage synchronizing strategy that ensures the smooth transition between the GCM and IM. Moreover, a unified controller is designed to achieve four-quadrant operation (V2G/G2V), vehicle to home power transfer, reactive power compensation and active filtering etc. The operation of the charging station complies with the IEEE 1547 standard, and the operation of the charging station is validated through the laboratory prototype.


  • Multimode Operation of Solar PV Array, Grid, Battery and Diesel Generator Set Based EV Charging Station

    by Anjeet Verma, Bhim Singh

    This paper deals with the multimode operation of a photovoltaic (PV) array, a battery, the grid and the diesel generator (DG) set based charging station (CS) for providing the continuous charging and uninterruptible supply to the household loads. In this CS, a single voltage source converter (VSC) operates the CS in an islanded mode (IM), the grid connected mode (GCM) and the DG set connected mode (DGM) and performs various tasks such as power management among different energy sources and charging the electric vehicles (EVs), extraction of maximum power from the PV array, the regulation of voltage and frequency of the generator, harmonics current compensation of nonlinear loads and intentional reactive power compensation. The control of CS is designed such that it primarily takes power from the PV array and a storage battery. In the absence of these two sources, the charging station takes power from the grid, and at last, it utilizes a squirrel cage induction generator based DG set. However, the DG set is operated such that it generates up to 33% more power than its rated capacity without exceeding the rated current in windings, therefore, the size of the DG is reduced. Moreover, the voltage and frequency of the generator are regulated at its rated values without a mechanical speed governor. In all operating modes, the CS complies with the IEEE 1547 standard and the total harmonic distortion (THD) of voltage and current, is achieved less than 5%.


  • Implementation of Solar PV- Battery and Diesel Generator Based Electric Vehicle Charging Station

    by Bhim Singh, Anjeet Verma, Ambrish Chandra, Kamal Al Haddad

    In this paper, a solar PV (Photovoltaic) array, a battery energy storage (BES), a diesel generator (DG) set and grid-based EV charging station (CS) is utilized to provide the incessant charging in islanded, grid connected and DG set connected modes. The charging station is primarily designed to use the solar photovoltaic PV array and a BES to charge the electric vehicle (EV) battery. However, in case of exhausted storage battery and unavailable solar PV array generation, the charging station intelligently takes power from the grid or DG (Diesel Generator) set. However, the power from DG set is drawn in a manner that, it always operates at 80-85% loading to achieve maximum fuel efficiency under all loading conditions. Moreover, in coordination with the storage battery, the charging station regulates the generator voltage and frequency without a mechanical speed governor. It also ensures that the power drawn from the grid or the DG set is at unity power factor (UPF) even at nonlinear loading. Moreover, the PCC (Point of Common Coupling) voltage is synchronized to the grid/ generator voltage to obtain the ceaseless charging. The charging station also performs the vehicle to grid active/reactive power transfer, vehicle to home and vehicle to vehicle power transfer for increasing the operational efficiency of the charging station. The operation of the charging station is experimentally validated using the prototype developed in the laboratory.


  • An Implementation of Solar PV Array Based Multifunctional EV Charger

    by Anjeet Verma, Bhim Singh, Ambrish Chandra, Kamal Al Haddad

    In this paper, an implementation of solar photovoltaic (PV) array powered grid connected, residential electric vehicle (EV) charger is presented, which caters the need of an EV, household loads and the grid. The charger is enabled to operate autonomously using PV array for providing an uninterruptible charging and power to household loads. However, in the absence of the PV array or insufficient PV array generation, the grid connected mode of operation is presented. Moreover, the charger is supported with the synchronization and seamless mode switching control, so that the charger automatically connects/disconnects from the grid without disturbing the EV charging and household supply. The charger is also enabled with the vehicle-to-grid (V2G) active/reactive power support to the grid and vehicle-to-home (V2H) power transfer for supporting the local loads in an islanded condition. The charger is also controlled to operate as an active power filter for achieving the unity power factor (UPF) operation and total harmonic distortion (THD) of grid current within 5%. Moreover, for achieving energy management, a dc link voltage regulation based energy management strategy is used and a sliding mode control (SMC) is used for regulating the dc link voltage. For satisfactory operation under distorted voltage condition, a second order generalized integrator frequency locked loop with dc offset rejection (SOGI-FLL-DR), is used to generate the sinusoidal reference grid current. The charger is designed for a single phase 230V, 50Hz grid and it is experimentally validated in the laboratory.


  • Multi-Objective Reconfigurable Three-Phase Off-Board Charger for EV

    by Anjeet Verma, Bhim Singh

    This paper deals with the control and implementation of solar photovoltaic (PV) array based multi-objective bi-directional charger beneficial for electric vehicle (EV), household load and utility. For EV, the charger provides the charging facility. For household load, the charger acts as a standalone inverter and for utility the charger acts as an active power filter. However, for providing the multi-functionality and the multimode operation capability of the charger, a reconfigurable control strategy is proposed. Moreover, an adaptive DC link voltage strategy is proposed for achieving the optimum voltage at DC link under all voltage conditions for achieving minimum ripple in grid currents. The charger also uses a voltage synchronization strategy for achieving the seamless mode transition between the grid connected and standalone modes. In grid connected mode, the charger uses a double second order generalized integrator (SOGI) based positive sequence estimator along with the improved linear sinusoidal tracer (ILST) based algorithm for generating the balanced and sinusoidal reference grid currents, under the unbalanced and distorted grid voltages. The charger is implemented in the laboratory, and the performance is presented under various steady-state and dynamic conditions.