Niloufar Raeis-Hosseini

[This corrects the article DOI: 10.1021/acsaelm.2c00979.].

Electrochemical metallization memory (ECM) devices have been made by sub-stoichiometric deposition of a tantalum oxide switching film (Ta₂O_5−x) using sputtering. We investigated the influence of zirconium as the active top electrode material in the lithographically fabricated ECM devices. A simple capacitor like (Pt/Zr/Ta₂O_5−x/Pt) structure represented the resistive switching memory. A cyclic voltammetry measurement demonstrated the electrochemical process of the memory device. The I–V characteristics of ECMs show stable bipolar resistive switching properties with reliable endurance and retention. The resistive switching mechanism results from the formation and rupture of a conductive filament characteristic of ECM. Our results suggest that Zr can be considered a potential active electrode in the ECMs for the next generation of nonvolatile nanoelectronics. We successfully showed that the ECM device can work under AC pulses to emulate the essential characteristics of an artificial synapse by further improvements.

The main requirements for skin-attachable memory devices are flexibility and biocompatibility. We represent a flexible, transparent, and biocompatible resistive switching random access memory (ReRAM) based on gold-decorated chitosan for future flexible and wearable electronics. The device with an Ag/Au–chitosan/Au cross-bar structure shows nonvolatile ReRAM properties. This fabricated Au–chitosan-based biocompatible ReRAM (bioReRAM) shows reliable bipolar memory performance with mechanical flexibility. The device shows essential memory characterizations including long data retention and hundreds of switching cycles. The origin of the resistance switching properties is related to trap-assisted space-charge-limited conduction in the high-resistance state and formation/annihilation of a conductive filament in the low-resistance state. This transparent bioReRAM is a viable candidate for flexible and biodegradable nanoelectronic devices.

Integration of metamaterial and nonvolatile memory devices with tunable characteristics is an enthusing area of research. Designing a unique nanoscale prototype to achieve a metasurface with reliable resistive switching properties is an elusive goal. We demonstrate a method to exploit the advantages of a phase-change material (PCM) as a metamaterial light absorber and a nanoscale data storage device. We designed and simulated a metamaterial perfect absorber (MPA) that can be reconfigured by adjusting the visible light properties of a chalcogenide-based PCM. The suggested perfect absorber is based on a Ge₂Sb₂Te₅ (GST) film, and is tuned between two distinct states by heat treatment. Furthermore, we fabricated and characterized a resistive switching memory (ReRAM) device with the same features. The MPA/ReRAM device with a conventional metal/dielectric/metal structure (Ag/GST/Al₂O₃/Pt) consisted of arrays of Ag squares patterned on a GST thin film and an alumina-coated Pt mirror on a glass substrate. Based on the numerical data, amorphous GST showed perfect absorbance in the visible spectrum, whereas, crystalline GST showed broadband perfect absorbance. The fabricated ReRAM device exhibited uniform, bidirectional, and programmable memory characteristics with a high ON/OFF ratio for nonvolatile memory applications. The elucidated origin of the bipolar resistive switching behavior is assigned to the formation and rupture of conductive filaments.

Integration of phase-change materials (PCMs) into electrical/optical circuits has initiated extensive innovation for applications of metamaterials (MMs) including rewritable optical data storage, metasurfaces, and optoelectronic devices. PCMs have been studied deeply due to their reversible phase transition, high endurance, switching speed, and data retention. Germanium-antimony-tellurium (GST) is a PCM that has amorphous and crystalline phases with distinct properties, is bistable and nonvolatile, and undergoes a reliable and reproducible phase transition in response to an optical or electrical stimulus; GST may therefore have applications in tunable photonic devices and optoelectronic circuits. In this progress article, we outline recent studies of GST and discuss its advantages and possible applications in reconfigurable metadevices. We also discuss outlooks for integration of GST in active nanophotonic metadevices.

Implementing biocompatible materials in resistive switching memory (ReRAM) devices provide opportunities to use them in biomedical applications. We demonstrate a robust, nonvolatile, flexible, and transparent ReRAM based on potato starch. We also introduce a biomolecular memory device that has a starch-chitosan composite layer. The ReRAM behavior can be controlled by mixing starch with chitosan in the resistive switching layer. Whereas starch-based bio-memory devices which show abrupt changes in current level; the memory device with mixed biopolymers undergoes gradual changes. Both devices exhibit uniform and robust programmable memory properties for nonvolatile memory applications. The explicated source of the bipolar resistive switching behavior is assigned to formation and rupture of carbon-rich filaments (CRFs). The gradual set/reset behavior in the memory device based on starch-chitosan mixture makes it suitable for use in neuromorphic devices.