SKSergey I. Kosenko

Sergey I. Kosenko

*This is an algorithmically generated author record based on publicly available information.

Sergey I. Kosenko has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental Fast Channel Reactor Operating in the Traveling-Wave Mode with a Softened Fast Neutron Spectrum

    by Victor Tarasov, Serhiy Chernezhenko, Volodymyr Vashchenko, Mykhailo Shcherbyna, Serhiy Kosenko, Viacheslav Lavrukhin

    This paper presents the principle scheme of the prototype fast single-channel reactor operating in the traveling-wave mode with a softened fast neutron spectrum. The reactor design has cylindrical symmetry. The problem of radiation resistance of construction materials in this design of the experimental reactor is solved on the basis of proposals previously published by the authors of the article. Specifically, the nuclear-fission traveling wave regime is implemented on neutrons with the softened fast spectrum (the spectrum peaks is in range of the 20-50 keV), which reduces the neutron impact on construction materials by more than an order of magnitude. To further reduce neutron impact on construction materials, the reactor design incorporates movement of the nuclear fuel relative to the fuel channel walls using elements of the hydraulic fuel handling system. The nuclear fuel in which the fission wave travels is cylindrical uranium dicarbide, which is homogeneous with respect to the neutron field.

  • Open Access

    Search for a Stable Traveling Fission Wave in Uranium Dicarbide in the Soft Fast Neutron Spectrum

    by Victor Tarasov, Serhiy Chernezhenko, Mykhailo Shcherbyna, Kateryna Shcherbyna, Serhiy Kosenko

    Previous studies established the viability of epithermal breed-and-burn regimes in a uranium dicarbide medium [1]. This research investigates the propagation of a fission wave in uranium dicarbide in the soft fast neutron spectrum (20-50 keV) using a one-group neutron diffusion model coupled with nuclide balance equations. By evaluating a soft fast neutron spectrum within a finite cylindrical geometry, this study identifies the key parameters for reactor ignition and confirms that this targeted energy successfully sustains a stable, traveling wave. Furthermore, following recent analytical proposals for a soft fast spectrum experimental reactor [2], this computational modeling addresses the need to rigorously validate the traveling wave burn criterion beyond previously relied-upon approximate equilibrium concentrations [3,4].

  • Open Access

    APPROACHES TO MODELING CONDITIONS OF THERMOACOUSTIC INSTABILITY IN NON-EQUILIBRIUM TWO-PHASE COOLANT OF NUCLEAR REACTORS

    by V.I. Skalozubov, O.A. Dorozh, V.A. Kondratyk, S.I. Kosenko, V.I. Konshin

    The consequences of thermoacoustic instability of the coolant in the active zone of nuclear reactors can be high-amplitude, high-frequency dynamic loads on the internal structures and a violation of the tightness of the TVEL shells. However, until now, there are no reactor control/diagnostic systems and operational instructions for managing accidents in conditions of thermoacoustic instability of the coolant in the reactor core. The main reason for this situation is the lack of substantiated methods for modeling the criteria and conditions for the occurrence of thermoacoustic instability in the active zone. The purpose of the work is the development of a criterion method for modeling the conditions of thermoacoustic instability of the coolant in the active zone of the reactor to substantiate the appropriate reactor control systems and symptom-oriented emergency instructions. An original method of determining the criteria and conditions of thermoacoustic instability of the coolant in the active zone depending on the determining parameters of the thermodynamic state of the reactor plant has been developed.. Based on the thermodynamic approach, which takes into account the level of completion of interphase heat and mass transfer processes in acoustic pressure waves, the criteria and area of thermoacoustic instability of the coolant in the reactor core are determined. The established area of thermoacoustic instability of the coolant in the reactor core was verified on the basis of known experimental data obtained at the experimental installation, which meets the criteria of thermodynamic similarity to the core of the VVER-1000 core. Based on the developed criterion method, the main provisions and requirements for the relevant reactor control/diagnostic systems and symptom-oriented instructions for managing accidents in conditions of thermoacoustic instability of the coolant in the active zone of the reactors are defined.

  • Open Access

    METHOD OF QUALIFICATION OF PASSIVE SAFETY SYSTEMS OF MODULAR NUCLEAR REACTORS WITH CIRCULATION CIRCUIT FLOWS

    by Vladimir Skalozubov, Eugene Pis'MEnnyi, Vadym Kondratyuk, Sergei Kosenko, Valeriy Konshin

    Low-power modular reactors are a promising direction for increasing the safety of nuclear power, because accident management in modular reactors is carried out only by passive safety systems (without electric pumps). Critical for the safety of modular reactors are accidents with a violation of the tightness of the natural circulation circuits of passive safety systems. The main limitations of using traditional accident modeling approaches with deterministic codes to qualify the reliability and operability of passive safety systems of modular reactors are related to the possibility of negative effects of "code differences" and "code user differences", as well as the unfoundedness of code verification/validation results. An original qualification method has been developed to ensure the safety conditions of the passive safety systems of the Westinghouse low-power modular reactor (SMR) in the event of accidents with a violation of the tightness of the natural circulation circuits. The assumptions adopted in the developed method ensure the conservatism of qualification results. Based on the preliminary calculation qualification of the natural circulation circuits of the SMR passive safety systems, it was established that for the relative sizes of the leaks, greater than 5% of the pipeline cross-section, a violation of safety conditions and drainage of the active zone may occur less than 24 hours after the start of the accident. It is necessary to modernize the SMR with regard to systems for diagnosing leaks in natural circulation circuits of passive safety systems and isolating damaged sections of circuits.


  • Open Access

    APPROACHES TO MODELING CONDITIONS OF THERMOACOUSTIC INSTABILITY IN NON-EQUILIBRIUM TWO-PHASE COOLANT OF NUCLEAR REACTORS

    by V.A. Kondratyk, V.I. Skalozubov, U.O. Komarov, S.I. Kosenko, V.I. Konshin

    The occurrence of thermoacoustic instability in the non-equilibrium two-phase flow of the coolant can significantly affect the reliability and integrity of the nuclear reactor's internal devices. At present, the development of adequate and justified methods for modeling thermoacoustic instability in the active zone of a nuclear reactor is an urgent issue. The purpose of the study is to develop a criterion method for determining the conditions for the occurrence of TAN in the active zone of nuclear reactors, which will increase operational safety and provide an opportunity to develop an operational system for diagnosing the conditions of TAN in the active zone of high-power reactor installations. For the conditions of transient and emergency modes of nuclear power plants with VVER, the thermodynamic approach of determining the conditions for the occurrence of thermoacoustic instability of a non-equilibrium two-phase coolant is more justified. Based on the thermodynamic approach, the conditions of thermoacoustic instability of the coolant in the active zone of the reactor were obtained. They depend on the defining thermodynamic parameters – reactor power, coolant consumption, pressure and temperature of the coolant at the entrance and exit of the active zone. It was established that in the nominal operating mode of the reactor, the coolant is stable with respect to thermoacoustic fluctuations. Based on the analysis of the well-known resonance approach to modeling the conditions for the occurrence of thermoacoustic instability (on the example of a single condensing bubble), it was established that the resonance effects of the coincidence of the frequency of propagation of acoustic waves and the frequency of condensation of steam bubbles can be significant for relatively short channels (less than 1 m) at relatively low pressures. For the conditions of transient and emergency modes of nuclear power plants with VVER, the thermodynamic approach of determining the conditions for the occurrence of thermoacoustic instability of a non-equilibrium two-phase coolant, based on the regularities of the conditions for the occurrence of oscillatory processes during acoustic perturbations of the thermodynamic parameters of the coolant flow in the active zone of a nuclear reactor, is more justified.


  • Open Access

    Criteria of thermochemical conditions of steam gas explosions in dynamic accident modes at nuclear power units with WWER reactors

    by Volodymyr M. Vashchenko, Volodymyr I. Skalozubov, Iryna B. Korduba, Serhiy I. Kosenko, Olena H. Zhukova

    The main lessons of the major accident at the Fukushima-Daiichi NPP in 2011 for the nuclear power industry identify the need to model, analyze and develop emergency measures for relatively unlikely events with catastrophic environmental consequences, taking into account multiple failures of safety systems. Steam-gas explosions became one of the main causes of the catastrophic environmental consequences of the Chernobyl and Fukushima accidents. Criteria and conditions for the occurrence of steam-gas explosions in dynamic emergency modes in the "tight" reactor circuit of nuclear power reactor units (NPP) with water-water reactors (WWER) with failures of safety systems valves and emergency steam gas removal are determined by the rate of change of thermodynamic and physico-chemical parameters. A method for determining the criteria and conditions for the occurrence of steam-gas explosions in dynamic accident modes with a "tight" reactor circuit and failure of safety valves for modeling the initial emergency events – seismic effects, falling of massive objects, etc. is presented. The conditions for the occurrence of hydrogen explosions are determined by the maximum rate of increase in the temperature of fuel oil shells, and the conditions for steam explosions are determined by the maximum rate of pressure increase as a result of the intensification of vaporization processes. The criteria for the occurrence of steam explosions in dynamic emergency modes are determined by the maximum pressure amplitude and the propagation speed of acoustic disturbances in the steam volume. And the criteria for hydrogen detonation in dynamic emergency modes are determined by the maximum amplitude of the increase in the temperature of the fuel shells and the average flow rate of the coolant in the active zone of the reactor.

  • Оцінка впливу гідродинамічної нестійкості перехідних режимів насосів систем безпеки під час аварій з міжконтурними течами на стан ядерних енергоустановок із ВВЕР

    by V. Kondratyuk, Yu. Pysmennyy, V. Skalozubov, Yu. Komarov, S. Kosenko

    З досвіду експлуатації, результатів контролю технічного стану великої кількості теплообмінних труб у кожному парогенераторі та результатів досліджень з імовірнісного аналізу безпеки вихідна подія з міжконтурними течами є однією з домінантних подій. Технічні складності ідентифікації міжконтурних теч, особливо розриву малої кількості теплообмінних трубок парогенератора, впливають на стратегії управління аваріями. Під час реалізації протиаварійних дій унаслідок пуску насосів може виникати перехідний процес, який за певних умов може призвести до коливальної гідродинамічної нестійкості в каналах систем безпеки, порушення умов теплообміну в активній зоні реактора, гідро- і термодинамічних ударів та інших негативних ефектів. Під час моделювання аварій детерміністичними кодами такий перехідний процес моделюється або спрощено, або взагалі не розглядається. Проте у перехідних режимах пуску насосів може виникнути коливальна гідродинамічна нестійкість параметрів потоку внаслідок інерційного запізнювання реакції напірно-витратної характеристики насосів. Крім того, на витрату в системах безпеки загалом можуть впливати зміни в процесі аварії протитиску в реакторі і парогенераторах. На основі консервативної теплогідродинамічної моделі аварії з міжконтурними течами наведено оригінальний метод кваліфікації ядерних енергоустановок із водо-водяними енергетичними реакторами в умовах гідродинамічної нестійкості перехідних режимів пуску насосів активних систем безпеки. Встановлено критерії впливу коливальної гідродинамічної нестійкості в режимах пуску насосів систем аварійного охолодження активної зони реактора високого та низького тиску, а також аварійного підживлення парогенератора для визначення умов та наслідків гідродинамічних і термічних ударів. Гідродинамічна нестійкість у режимах пуску насосів систем безпеки за певних умов істотно впливає на імпульси тиску гідроударів та на швидкість зміни температури металу обладнання під час термоударів, що може вплинути на надійність і цілісність систем. На основі розрахункових обґрунтувань за розробленим методом кваліфікації встановлено необхідність модернізації активних систем безпеки для запобігання коливальній гідродинамічній нестійкості в перехідних режимах пуску насосів.


  • Open Access

    On Some Fundamental Peculiarities of the Traveling Wave Reactor

    by V. D. Rusov, V. A. Tarasov, I. V. Sharph, V. N. Vashchenko, E. P. Linnik, T. N. Zelentsova, M. E. Beglaryan, S. A. Chernegenko, S. I. Kosenko, V. P. Smolyar

    On the basis of the condition for nuclear burning wave existence in the neutron-multiplying media (U-Pu and Th-U cycles) we show the possibility of surmounting the so-called dpa-parameter problem and suggest an algorithm of the optimal nuclear burning wave mode adjustment, which is supposed to yield the wave parameters (fluence/neutron flux, width and speed of nuclear burning wave) that satisfy the dpa-condition associated with the tolerable level of the reactor materials radioactive stability, in particular that of the cladding materials. It is shown for the first time that the capture and fission cross sections of238U and239Pu increase with temperature within 1000–3000 K range, which under certain conditions may lead to a global loss of the nuclear burning wave stability. Some variants of the possible stability loss due to the so-called blow-up modes (anomalous nuclear fuel temperature and neutron flow evolution) are discussed and are found to possibly become a reason for a trivial violation of the traveling wave reactor internal safety.


  • Open Access

    The peculiarities of cross-correlation between two secondary precursors – Radon and magnetic field variations, induced by stress transfer changes

    by V.D. Rusov, V.Yu. Maksymchuk, R. Ilić, V.M. Pavlovych, R. Jaćimović, V.G. Bakhmutov, O. Kakaev, V.N. Vaschenko, J. Skvarč, L. Hanžič, et al.


  • Analysis of experimental data within the statistical theory of critical phenomena

    by V. N. Bondarev, P. P. Bezverkhii, S. I. Kosenko

    An approach devised earlier is generalized for a binodal line and used to analyze experiments on a broad set of fluids from He4to organic compounds. Experimental binodal lines and isothermal...