VKVladimir Kvon

Vladimir Kvon

*This is an algorithmically generated author record based on publicly available information.

Vladimir Kvon has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Controlled dust mobilization on a solid surface with grazing electron beam incidence

    by Sean Gopalakrishnan, Xu Wang, Mihály Horányi, Vladimir Kvon, Manis Chaudhuri, Andrei Yakunin, Luuk Heijmans, Hariprasad Gangadharan, Pavel Krainov, Dmitry Astakhov

    We present experimental results of dust mobilization on a solid surface under an electron beam with grazing incidence. When the electron beam energy has a secondary electron yield greater than 1, dust particles move in the opposite direction of the electron beam. This is caused by asymmetric charging between the beam-facing and beam-shadowed sides of the particles. On the beam-facing side, the microcavity between a dust particle and the substrate surface collects beam electrons and emits beam-induced secondary electrons. In contrast, on the beam-shadowed side, the microcavity mainly collects secondary electrons. It is shown that the charge magnitude on the beam-shadowed side is larger than that on the beam-facing side, resulting in a net repulsive force pointing in the opposite direction of the beam to move the particle. When the beam energy has a secondary electron yield smaller than 1, the beam-facing side charged by primary beam electrons and the beam-shadowed side charged by backscattered beam electrons reach a similar potential close to the beam energy, resulting in the dust particles moving in random directions. These experimental results show agreement with particle-in-cell simulations.

  • Open Access

    Charging mechanisms of dust on a surface at different neutral pressures

    by José H. Pagán Muñoz, Xu Wang, Mihály Horányi, Cordell Umland, Vladimir Kvon, Luuk Heijmans, Manis Chaudhuri, Mark van de Kerkhof, Andrei M. Yakunin, Pavel Krainov, et al.

    We present experimental and modeling results of dust mobilization on a dielectric surface exposed to an electron beam with a background plasma in two pressure regimes. Our results reveal two charging mechanisms: charge pumping and ion lensing. These two charging mechanisms are advanced from the patched charge model, which describes charging within microcavities between dust and its substrate surface. At lower pressure, as the plasma density increases relative to the electron beam, the substrate surface potential changes from positive to negative, driving more secondary electrons induced by the electron beam to be pumped into microcavities (charge pumping), causing enhanced negative charges within the microcavities and subsequently stronger repulsive forces to mobilize dust. On the other hand, at a higher pressure, increased ion-neutral charge-exchange collisions result in slow ions within the plasma sheath, which are attracted into the negatively charged microcavities (ion lensing), leading to charge neutralization and reduced dust mobility.


  • Open Access

    Electrostatic lofting conditions of single dust particles on a solid surface

    by José H. Pagán Muñoz, Xu Wang, Mihály Horányi, Vladimir Kvon, Luuk Heijmans, Manis Chaudhuri, Mark van de Kerkhof, Andrei M. Yakunin, Pavel Krainov, Dmitry Astakhov

    We present experimental results on the initial lofting conditions of single dust particles resting on a solid surface when exposed to a 120 eV electron beam. Lofting is characterized as a function of particle size (10–70 μm in radii) and shape (jagged vs spherical). Similar to previous measurements of particles lofted from a dust pile, vertical launch velocities show an inverse relationship with the particle size and broad distributions for same-sized particles. Different from piled dust, the lofting velocities of single particles depend only weakly on the shape of the particles as also found in modeling. It is shown that jagged single particles have lower lofting velocities than jagged piled particles, while spherical single particles are lofted at higher velocities, compared to spherical piled particles. Based on the patched charge model (PCM) for piled particles and PCM for single particles (PCM-SP) on a solid surface, these results indicate that differences in the formation of microcavities for different scenarios play a role in determining the charging and lofting of dust particles.


  • Liquid metals as a divertor plasma-facing material explored using the Pilot-PSI and Magnum-PSI linear devices

    by T W Morgan, P Rindt, G G van Eden, V Kvon, M A Jaworksi, N J Lopes Cardozo

    For DEMO and beyond, liquid metal plasma-facing components are considered due to their resilience to erosion through flowed replacement, potential for cooling beyond conduction and inherent immunity to many of the issues of neutron loading compared to solid materials. The development curve of liquid metals is behind that of e.g. tungsten however, and tokamak-based research is currently somewhat limited in scope. Therefore, investigation into linear plasma devices can provide faster progress under controlled and well-diagnosed conditions in assessing many of the issues surrounding the use of liquid metals. The linear plasma devices Magnum-PSI and Pilot-PSI are capable of producing DEMO-relevant plasma fluxes, which well replicate expected divertor conditions, and the exploration of physics issues for tin (Sn) and lithium (Li) such as vapour shielding, erosion under high particle flux loading and overall power handling are reviewed here. A deeper understanding of erosion and deposition through this work indicates that stannane formation may play an important role in enhancing Sn erosion, while on the other hand the strong hydrogen isotope affinity reduces the evaporation rate and sputtering yields for Li. In combination with the strong redeposition rates, which have been observed under this type of high-density plasma, this implies that an increase in the operational temperature range, implying a power handling range of 20–25 MW m −2 for Sn and up to 12.5 MW m −2 for Li could be achieved. Vapour shielding may be expected to act as a self-protection mechanism in reducing the heat load to the substrate for off-normal events in the case of Sn, but may potentially be a continual mode of operation for Li.


  • Tin re-deposition and erosion measured by cavity-ring-down-spectroscopy under a high flux plasma beam

    by V. Kvon, R. Al, K. Bystrov, F.J.J. Peeters, M.C.M. van de Sanden, T.W. Morgan

    Cavity-ring-down spectroscopy (CRDS) was implemented to measure the re-deposition of liquid tin under a high flux plasma beam in the linear plasma device Pilot-PSI. A capillary porous system (CPS) consisting of a molybdenum cup and tungsten meshes (pores diameters of 0.2 mm and 0.44 mm) was filled with tin and exposed to argon plasma. The absorption of a UV laser-beam at 286.331 nm was used to determine a number of sputtered neutral tin atoms. The incoming flux of argon ions of ~50 eV was 1.6–2.7 × 1023 m−2 s−1, and the sample temperature measured by pyrometry varied from 850 °C to 1200 °C during exposures. The use of CRDS for measuring absolute number of particles under such plasma exposure was demonstrated for the first time. The number of sputtered tin particles in the cavity region assuming no losses would be expected to be 5.5 × 1011–1.2 × 1012 while CRDS measurements showed only 5.7–9.9 × 108. About 98–99.8% of sputtered particles were therefore found to not reach the CRDS observation volume. Spectroscopic ratios of Sn I to Sn II ions, as well as equilibrium considerations, indicate that fast ionization as well as plasma entrainment of neutrals is responsible for the discrepancy. This would lead to high re-deposition rates, implying a lowered contamination rate of core plasma and lower required replenishment rates at high-flux conditions than would otherwise be expected.