Marc Balmer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marc Balmer has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Ronald Ernst Jung
Clinic of Reconstructive Dentistry, Center of Dental Medicine University of Zurich Zurich Switzerland
20 shared publications - Ralf-Joachim Kohal
Department of Prosthetic Dentistry, Center for Dental Medicine, Medical Center-University of Freiburg, Faculty of Medicine, University of Freiburg, Hugstetterstr. 55, 79106 Freiburg, Germany
8 shared publications - Benedikt Christopher Spies
Department of Prosthetic Dentistry, Center for Dental Medicine, Medical Center-University of Freiburg, Faculty of Medicine, University of Freiburg, Freiburg, Germany
6 shared publications - Daniel Stefan Thoma
Clinic of Reconstructive Dentistry, Center for Dental Medicine University of Zurich Zürich Switzerland
6 shared publications - Kirstin Vach
Center for Data Science, Eberswalde University for Sustainable Development, Schicklerstr. 5, 16225 Eberswalde, Germany
5 shared publications - Stefan P. Bienz
Clinic of Reconstructive Dentistry, Center for Dental Medicine University of Zurich Zürich Switzerland
4 shared publications
Latest Publications
- Open Access
- 11 October 2026
- Published by Wiley in Clinical Oral Implants Research
- Vol. 37 (11) , 1350-1362
Three‐Year Follow‐Up of Clinical, Radiographic, and Patient‐Reported Outcomes for Zirconia and Titanium Implants in the Posterior Region: A Randomized Controlled Trial
Objective: To compare the 3‐year clinical, radiographic, esthetic, and patient‐reported outcomes of zirconia (Zr) and titanium (Ti) implants placed in posterior sites in a randomized, controlled within‐subject design. Materials and Methods: Forty‐two patients each received one Zr and one Ti implant. Clinical and radiographic outcomes were evaluated at baseline, 1, and 3 years after crown delivery. Marginal bone levels (MBL), peri‐implant soft‐tissue parameters, technical complications, esthetic outcomes (Δ E values, VAS scores), and patient‐reported measures were assessed. Thirty‐nine patients (37 Zr; 39 Ti implants) were available at 3 years. Results: The 3‐year survival rate was 100% for Ti and 94.9% for Zr implants. MBL remained stable after the initial remodeling phase, with no clinically relevant differences between materials. Peri‐implant soft‐tissue conditions (BOP, plaque presence, PD, KT) were similar for Zr and Ti. Two zirconia implants were lost during the observation period. Peri‐implantitis was diagnosed in 7.9% of the implants, affecting three titanium and three zirconia implants. Technical complications differed between groups: chipping occurred significantly more often at Zr implant‐supported crowns. Ti implants showed two screw‐loosening events, while Zr implants showed two cases of decementation. Esthetic and patient‐reported outcomes were comparable, with low perceived mucosal color differences and a slight preference for Zr sites, if detectable. Conclusion: Zr and Ti implants showed similar peri‐implant health, marginal bone stability, esthetic outcomes, and patient satisfaction after 3 years. Zr implants, however, demonstrated a slightly lower survival rate and more chipping. Trial Registration: The trial is registered in the German Clinical Trials Register (DRKS) under the ID DRKS00008591
- 11 October 2026
- Published by Wiley in Clinical Oral Implants Research
- Vol. 37 (11) , 1350-1362
Open AccessThree‐Year Follow‐Up of Clinical, Radiographic, and Patient‐Reported Outcomes for Zirconia and Titanium Implants in the Posterior Region: A Randomized Controlled Trial
Objective: To compare the 3‐year clinical, radiographic, esthetic, and patient‐reported outcomes of zirconia (Zr) and titanium (Ti) implants placed in posterior sites in a randomized, controlled within‐subject design. Materials and Methods: Forty‐two patients each received one Zr and one Ti implant. Clinical and radiographic outcomes were evaluated at baseline, 1, and 3 years after crown delivery. Marginal bone levels (MBL), peri‐implant soft‐tissue parameters, technical complications, esthetic outcomes (Δ E values, VAS scores), and patient‐reported measures were assessed. Thirty‐nine patients (37 Zr; 39 Ti implants) were available at 3 years. Results: The 3‐year survival rate was 100% for Ti and 94.9% for Zr implants. MBL remained stable after the initial remodeling phase, with no clinically relevant differences between materials. Peri‐implant soft‐tissue conditions (BOP, plaque presence, PD, KT) were similar for Zr and Ti. Two zirconia implants were lost during the observation period. Peri‐implantitis was diagnosed in 7.9% of the implants, affecting three titanium and three zirconia implants. Technical complications differed between groups: chipping occurred significantly more often at Zr implant‐supported crowns. Ti implants showed two screw‐loosening events, while Zr implants showed two cases of decementation. Esthetic and patient‐reported outcomes were comparable, with low perceived mucosal color differences and a slight preference for Zr sites, if detectable. Conclusion: Zr and Ti implants showed similar peri‐implant health, marginal bone stability, esthetic outcomes, and patient satisfaction after 3 years. Zr implants, however, demonstrated a slightly lower survival rate and more chipping. Trial Registration: The trial is registered in the German Clinical Trials Register (DRKS) under the ID DRKS00008591
- Open Access
- 21 August 2026
- Published by Wiley in Clinical Oral Implants Research
- Vol. 37 (10) , 1197-1207
Monolithic Zirconia Versus Porcelain‐Fused‐to‐Metal Implant‐Supported Fixed Dental Prostheses in the Posterior Region: 3‐Year Results of a Randomized Controlled Clinical Trial
Objectives: To compare the clinical, biological, and technical outcomes of posterior three‐unit implant‐supported fixed dental prostheses (iFDPs) fabricated from monolithic zirconia (MonoZR) or porcelain‐fused‐to‐metal (PFM). Materials and Methods: In this prospective randomized controlled trial, partially edentulous patients requiring a posterior three‐unit iFDP supported by two implants were randomly assigned to MonoZR or PFM iFDPs. The primary outcome was ceramic fracture. Secondary outcomes included prosthesis survival, complication‐free survival, marginal bone level (MBL) changes, peri‐implant clinical parameters, and USPHS ratings. Follow‐up examinations were performed at 1 and 3 years. Statistical analyses included Kaplan–Meier estimates, Fisher's exact test, and linear mixed‐effects models ( α = 0.05). Results: Fifty‐five patients received iFDPs at baseline (MonoZR: n = 28; PFM: n = 27), and 45 completed the 3‐year follow‐up. Two prosthesis failures occurred, one in each group, both associated with implant loss, with no difference in survival between groups ( p = 1.00). Veneering ceramic chipping occurred only in the PFM group (3/23; 13%) and not in the MonoZR group (0/22) ( p = 0.11). Complication‐free survival, peri‐implant clinical parameters, and MBL changes did not differ significantly between groups ( p > 0.05). Plaque index and bleeding on probing increased over time, while probing depth and MBL remained stable. Both groups showed high clinical acceptability according to USPHS criteria. Conclusions: Both MonoZR and PFM posterior three‐unit iFDPs demonstrated high survival and favorable biological outcomes after 3 years. MonoZR showed no chipping events and may represent a promising alternative to PFM for posterior implant‐supported restorations. Trial Registration: German Clinical Trials Register: DRKS00011039
- 21 August 2026
- Published by Wiley in Clinical Oral Implants Research
- Vol. 37 (10) , 1197-1207
Open AccessMonolithic Zirconia Versus Porcelain‐Fused‐to‐Metal Implant‐Supported Fixed Dental Prostheses in the Posterior Region: 3‐Year Results of a Randomized Controlled Clinical Trial
Objectives: To compare the clinical, biological, and technical outcomes of posterior three‐unit implant‐supported fixed dental prostheses (iFDPs) fabricated from monolithic zirconia (MonoZR) or porcelain‐fused‐to‐metal (PFM). Materials and Methods: In this prospective randomized controlled trial, partially edentulous patients requiring a posterior three‐unit iFDP supported by two implants were randomly assigned to MonoZR or PFM iFDPs. The primary outcome was ceramic fracture. Secondary outcomes included prosthesis survival, complication‐free survival, marginal bone level (MBL) changes, peri‐implant clinical parameters, and USPHS ratings. Follow‐up examinations were performed at 1 and 3 years. Statistical analyses included Kaplan–Meier estimates, Fisher's exact test, and linear mixed‐effects models ( α = 0.05). Results: Fifty‐five patients received iFDPs at baseline (MonoZR: n = 28; PFM: n = 27), and 45 completed the 3‐year follow‐up. Two prosthesis failures occurred, one in each group, both associated with implant loss, with no difference in survival between groups ( p = 1.00). Veneering ceramic chipping occurred only in the PFM group (3/23; 13%) and not in the MonoZR group (0/22) ( p = 0.11). Complication‐free survival, peri‐implant clinical parameters, and MBL changes did not differ significantly between groups ( p > 0.05). Plaque index and bleeding on probing increased over time, while probing depth and MBL remained stable. Both groups showed high clinical acceptability according to USPHS criteria. Conclusions: Both MonoZR and PFM posterior three‐unit iFDPs demonstrated high survival and favorable biological outcomes after 3 years. MonoZR showed no chipping events and may represent a promising alternative to PFM for posterior implant‐supported restorations. Trial Registration: German Clinical Trials Register: DRKS00011039
- 18 August 2026
- Published by Elsevier in Journal of Dentistry
- Vol. 175
Accuracy and feasibility of robot-assisted implant surgery in edentulous patients: A retrospective case series
- 18 August 2026
- Published by Elsevier in Journal of Dentistry
- Vol. 175
Accuracy and feasibility of robot-assisted implant surgery in edentulous patients: A retrospective case series
- Open Access
- 28 May 2026
- Published by Wiley in Clinical Implant Dentistry and Related Research
- Vol. 28 (3) , e70160
Zirconia versus Titanium Implants: 1‐year Prosthetic Outcome of Screw‐Retained Single Crowns in a Randomized Clinical Trial
Aim: To compare one‐year prosthetic, technical, and esthetic outcomes of screw‐retained, implant‐supported all‐ceramic single crowns placed on two‐piece zirconia (ZrO 2 ) versus titanium implants. Materials and Methods: In this randomized, prospective, multicenter clinical trial, patients received screw‐retained, implant‐supported all‐ceramic single crowns placed either on a two‐piece zirconia implant with a titanium base connection or on a titanium implant with a conventional titanium base (implant diameters: 4.1 mm). Restoration survival and technical complications were systematically recorded. Peri‐implant soft‐tissue parameters, including plaque index (PI), papilla bleeding index (PBI), and papilla index (PaI), were assessed at baseline and at the one‐year follow‐up. Baseline was set at three weeks after crown insertion. Statistical analyses were performed using descriptive statistics. Chi‐square tests were used to compare outcomes between the zirconia and titanium implant groups, with the level of significance set at p < 0.05. Results: A total of 117 implants were restored, and 112 restorations were available for analysis after one year of function. Restoration survival was 100% in both the zirconia and titanium implant groups. No statistically significant differences were observed between groups with regard to overall technical complication rates. Veneered zirconia crowns exhibited significantly higher complication rates compared with monolithic restorations, irrespective of the supporting implant material. Peri‐implant soft‐tissue parameters, including PI, PBI, and PaI, did not differ significantly between groups. Conclusion: Within the limitations of this prospective randomized clinical trial, restorations supported by zirconia implants with a screw‐retained titanium base connection demonstrated short‐term clinical performance comparable to that of restorations placed on titanium implants. Both groups showed a 100% restoration survival rate, with no significant differences in technical complications or peri‐implant soft‐tissue parameters. These findings should be interpreted considering the one‐year follow‐up, the study design primarily powered to detect differences in marginal bone loss, and the exclusive use of regular‐diameter implants. Overall, the results support the favorable short‐term clinical performance at 1 year. Trial Registration: The study is registered at the German Clinical Trial Register ( https://drks.de/search/de/trial/DRKS00013209 ) as well as at the Federal Office of Public Health's (FOPH) portal for human research in Switzerland (kofam.ch)
- 28 May 2026
- Published by Wiley in Clinical Implant Dentistry and Related Research
- Vol. 28 (3) , e70160
Open AccessZirconia versus Titanium Implants: 1‐year Prosthetic Outcome of Screw‐Retained Single Crowns in a Randomized Clinical Trial
Aim: To compare one‐year prosthetic, technical, and esthetic outcomes of screw‐retained, implant‐supported all‐ceramic single crowns placed on two‐piece zirconia (ZrO 2 ) versus titanium implants. Materials and Methods: In this randomized, prospective, multicenter clinical trial, patients received screw‐retained, implant‐supported all‐ceramic single crowns placed either on a two‐piece zirconia implant with a titanium base connection or on a titanium implant with a conventional titanium base (implant diameters: 4.1 mm). Restoration survival and technical complications were systematically recorded. Peri‐implant soft‐tissue parameters, including plaque index (PI), papilla bleeding index (PBI), and papilla index (PaI), were assessed at baseline and at the one‐year follow‐up. Baseline was set at three weeks after crown insertion. Statistical analyses were performed using descriptive statistics. Chi‐square tests were used to compare outcomes between the zirconia and titanium implant groups, with the level of significance set at p < 0.05. Results: A total of 117 implants were restored, and 112 restorations were available for analysis after one year of function. Restoration survival was 100% in both the zirconia and titanium implant groups. No statistically significant differences were observed between groups with regard to overall technical complication rates. Veneered zirconia crowns exhibited significantly higher complication rates compared with monolithic restorations, irrespective of the supporting implant material. Peri‐implant soft‐tissue parameters, including PI, PBI, and PaI, did not differ significantly between groups. Conclusion: Within the limitations of this prospective randomized clinical trial, restorations supported by zirconia implants with a screw‐retained titanium base connection demonstrated short‐term clinical performance comparable to that of restorations placed on titanium implants. Both groups showed a 100% restoration survival rate, with no significant differences in technical complications or peri‐implant soft‐tissue parameters. These findings should be interpreted considering the one‐year follow‐up, the study design primarily powered to detect differences in marginal bone loss, and the exclusive use of regular‐diameter implants. Overall, the results support the favorable short‐term clinical performance at 1 year. Trial Registration: The study is registered at the German Clinical Trial Register ( https://drks.de/search/de/trial/DRKS00013209 ) as well as at the Federal Office of Public Health's (FOPH) portal for human research in Switzerland (kofam.ch)
- Open Access
- 25 April 2026
- Published by Wiley in Journal of Periodontal Research
- Vol. 61 (9) , 1017-1032
Augmented and Virtual Reality in Dental Medicine Updated: A Systematic Review and Meta‐Analysis
Aim: This updated systematic review aimed to synthesize and evaluate the available evidence on the use of augmented reality (AR), mixed reality (MR), and virtual reality (VR) technologies in dental medicine and education. Both qualitative synthesis and quantitative analysis through pairwise meta‐analysis, where applicable, were performed to assess their effectiveness and potential applications in clinical and educational settings. Methods: A systematic electronic search was conducted, incorporating an updated search strategy from the original publication to reflect updated terminology, for articles published between January 1, 2019, and July 14, 2025. Articles reporting the use of AR, MR, or VR in clinical treatment or dental education were eligible for inclusion. Data on study characteristics, target population, dental discipline, application concept, type of reality, primary and secondary outcomes were extracted. Pairwise frequentist meta‐analysis was conducted on randomized controlled trials (RCTs) assessing VR and objective stress‐related clinical parameters such as heart rate. Study quality was appraised using the corresponding scale according to the study design. Results: A total of 110 studies, reporting the use of AR, MR or VR, encompassing 8573 participants, were included. VR was the most frequently investigated technology ( n = 94), followed by AR ( n = 11) and MR ( n = 2). Most studies evaluated multiple applications: clinical or patient‐centered applications were evaluated in 71 trials, operator‐ or clinician‐orientated applications in 33, and educational applications in 132 studies. Among primary outcomes, patient‐reported ( n = 30) and educational outcomes ( n = 57) predominated, whereas clinical, clinician‐, and operator‐related outcomes were less frequently assessed. Results from the pairwise meta‐analyses of RCTs showed that VR significantly reduced anxiety levels in children patients when compared to tell‐show‐do techniques (SMD = −1.32, 95% CI −1.93 to −0.72); meanwhile, there was a borderline significant reduction in heart rate levels of children patients under the VR technique compared to tell‐show‐do technique (MD = −3.26, 95% CI −6.51 to −0.00). On the other hand, no significant differences were found in terms of physiological and reported outcomes in adult patients. Conclusion: AR, MR and VR are increasingly used in dental medicine and education, mainly in undergraduate and postgraduate training. Current evidence supports the effectiveness of immersive technologies, particularly VR, in enhancing learning outcomes for students and improving patient experience, especially in anxiety and pain management. However, conclusions are limited by heterogeneity and a small number of high‐quality studies, with overall low to moderate certainty of evidence. Trial Registration: PROSPERO number: CDR42023403360 and date of registration 10/03/2023. Start date of systematic review 13/03/2023.
- 25 April 2026
- Published by Wiley in Journal of Periodontal Research
- Vol. 61 (9) , 1017-1032
Open AccessAugmented and Virtual Reality in Dental Medicine Updated: A Systematic Review and Meta‐Analysis
Aim: This updated systematic review aimed to synthesize and evaluate the available evidence on the use of augmented reality (AR), mixed reality (MR), and virtual reality (VR) technologies in dental medicine and education. Both qualitative synthesis and quantitative analysis through pairwise meta‐analysis, where applicable, were performed to assess their effectiveness and potential applications in clinical and educational settings. Methods: A systematic electronic search was conducted, incorporating an updated search strategy from the original publication to reflect updated terminology, for articles published between January 1, 2019, and July 14, 2025. Articles reporting the use of AR, MR, or VR in clinical treatment or dental education were eligible for inclusion. Data on study characteristics, target population, dental discipline, application concept, type of reality, primary and secondary outcomes were extracted. Pairwise frequentist meta‐analysis was conducted on randomized controlled trials (RCTs) assessing VR and objective stress‐related clinical parameters such as heart rate. Study quality was appraised using the corresponding scale according to the study design. Results: A total of 110 studies, reporting the use of AR, MR or VR, encompassing 8573 participants, were included. VR was the most frequently investigated technology ( n = 94), followed by AR ( n = 11) and MR ( n = 2). Most studies evaluated multiple applications: clinical or patient‐centered applications were evaluated in 71 trials, operator‐ or clinician‐orientated applications in 33, and educational applications in 132 studies. Among primary outcomes, patient‐reported ( n = 30) and educational outcomes ( n = 57) predominated, whereas clinical, clinician‐, and operator‐related outcomes were less frequently assessed. Results from the pairwise meta‐analyses of RCTs showed that VR significantly reduced anxiety levels in children patients when compared to tell‐show‐do techniques (SMD = −1.32, 95% CI −1.93 to −0.72); meanwhile, there was a borderline significant reduction in heart rate levels of children patients under the VR technique compared to tell‐show‐do technique (MD = −3.26, 95% CI −6.51 to −0.00). On the other hand, no significant differences were found in terms of physiological and reported outcomes in adult patients. Conclusion: AR, MR and VR are increasingly used in dental medicine and education, mainly in undergraduate and postgraduate training. Current evidence supports the effectiveness of immersive technologies, particularly VR, in enhancing learning outcomes for students and improving patient experience, especially in anxiety and pain management. However, conclusions are limited by heterogeneity and a small number of high‐quality studies, with overall low to moderate certainty of evidence. Trial Registration: PROSPERO number: CDR42023403360 and date of registration 10/03/2023. Start date of systematic review 13/03/2023.
- Open Access
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Robotics and Bionics
- Vol. 8 (2) , 727-738
Miniature Intraoral Robot (MIR) for Minimally Invasive Tooth Preparation
Dental restorations are used to replace the loss of natural tooth structure for medical reasons, to restore function, or to improve aesthetics. For this purpose, the affected teeth are manually prepared to provide adequate space for the dental restoration. The outcome of tooth preparation depends largely on the skills and experience of the dentists. To improve consistency, predictability, and reduce invasiveness, we developed a Miniature Intraoral Robot (MIR). The MIR was designed to be mounted inside the mouth and actuated by remotely placed motors via flexible shafts. This paper presents the workflow, requirements, concept, prototyped MIR design, and its performance evaluation in positioning accuracy and grinding of resin and dental hybrid ceramic workpieces on the test bench. Actuation via flex shafts successfully achieved delay-free 1:1 torque transmission across various speeds and frequencies. In open-loop control, the prototype successfully demonstrated circular path-following motions with and without grinding. The positioning error without grinding resulted in an average absolute positioning error of 0.18mm. The deviation of the actual ground surface from the planned ground surface resulted in an average absolute error of 0.16mm. These results suggest that the prototype reached the required order of magnitude for dental interventions despite the sole reliance on remotely placed motor encoders without any position sensors inside the MIR’s joints.
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Robotics and Bionics
- Vol. 8 (2) , 727-738
Open AccessMiniature Intraoral Robot (MIR) for Minimally Invasive Tooth Preparation
Dental restorations are used to replace the loss of natural tooth structure for medical reasons, to restore function, or to improve aesthetics. For this purpose, the affected teeth are manually prepared to provide adequate space for the dental restoration. The outcome of tooth preparation depends largely on the skills and experience of the dentists. To improve consistency, predictability, and reduce invasiveness, we developed a Miniature Intraoral Robot (MIR). The MIR was designed to be mounted inside the mouth and actuated by remotely placed motors via flexible shafts. This paper presents the workflow, requirements, concept, prototyped MIR design, and its performance evaluation in positioning accuracy and grinding of resin and dental hybrid ceramic workpieces on the test bench. Actuation via flex shafts successfully achieved delay-free 1:1 torque transmission across various speeds and frequencies. In open-loop control, the prototype successfully demonstrated circular path-following motions with and without grinding. The positioning error without grinding resulted in an average absolute positioning error of 0.18mm. The deviation of the actual ground surface from the planned ground surface resulted in an average absolute error of 0.16mm. These results suggest that the prototype reached the required order of magnitude for dental interventions despite the sole reliance on remotely placed motor encoders without any position sensors inside the MIR’s joints.
- Top Cited PapersOpen Access
- 22 January 2026
- Published by Wiley in Clinical Oral Implants Research
- Vol. 37 (4) , 496-508
One‐Year Analysis of Clinical and Radiological Outcomes of Two‐Piece Zirconia Compared to Titanium Implants: A Multicenter Prospective Randomized Clinical Trial
Objectives: To evaluate the clinical performance of two‐piece zirconia implants with screw‐retained abutments compared to titanium implants after 1 year of loading. Materials and Methods: In this multicenter, prospective, randomized clinical trial, 61 two‐piece zirconia and 61 titanium implants were placed and restored with single crowns. Evaluations were performed at implant placement, crown delivery, and 1‐year post‐loading. Peri‐implant Marginal Bone Loss (MBL), survival rate, early wound healing index, and soft tissue parameters were assessed. Intergroup comparisons of continuous outcomes were performed using Linear Mixed‐Effects Models accounting for center and potential confounders. Categorical variables were analyzed using the chi‐square or Fisher's exact test. Survival was analyzed using Kaplan–Meier estimates. Significance was set at p < 0.05. Results: No significant differences were found between the two implant types. Mean MBL from implantation to crown insertion was 1.10 ± 0.78 mm for titanium and 0.94 ± 0.67 mm for zirconia implants. No significant additional bone loss occurred over the subsequent year, with changes of 0.07 ± 0.55 mm and 0.08 ± 0.51 mm for titanium and zirconia, respectively. After 1 year, zirconia implants showed a 100% survival rate, while titanium implants showed 96.5% with two failures. At 1 year, differences in probing depths, plaque accumulation, and Papilla Bleeding Index were not statistically significant. Conclusion: After 1 year of loading, no statistically significant differences in MBL, implant survival, or peri‐implant health were found between zirconia and titanium implants, indicating no clinical superiority. Zirconia implants may therefore be considered a viable alternative in single‐tooth implant restorations. Trial Registration: The study is registered at the German Clinical Trial Register (No. DRKS 00013209) as well as at the Federal Office of Public Health's (FOPH) portal for human research in Switzerland (kofam.ch)
- 22 January 2026
- Published by Wiley in Clinical Oral Implants Research
- Vol. 37 (4) , 496-508
Top Cited PapersOpen AccessOne‐Year Analysis of Clinical and Radiological Outcomes of Two‐Piece Zirconia Compared to Titanium Implants: A Multicenter Prospective Randomized Clinical Trial
Objectives: To evaluate the clinical performance of two‐piece zirconia implants with screw‐retained abutments compared to titanium implants after 1 year of loading. Materials and Methods: In this multicenter, prospective, randomized clinical trial, 61 two‐piece zirconia and 61 titanium implants were placed and restored with single crowns. Evaluations were performed at implant placement, crown delivery, and 1‐year post‐loading. Peri‐implant Marginal Bone Loss (MBL), survival rate, early wound healing index, and soft tissue parameters were assessed. Intergroup comparisons of continuous outcomes were performed using Linear Mixed‐Effects Models accounting for center and potential confounders. Categorical variables were analyzed using the chi‐square or Fisher's exact test. Survival was analyzed using Kaplan–Meier estimates. Significance was set at p < 0.05. Results: No significant differences were found between the two implant types. Mean MBL from implantation to crown insertion was 1.10 ± 0.78 mm for titanium and 0.94 ± 0.67 mm for zirconia implants. No significant additional bone loss occurred over the subsequent year, with changes of 0.07 ± 0.55 mm and 0.08 ± 0.51 mm for titanium and zirconia, respectively. After 1 year, zirconia implants showed a 100% survival rate, while titanium implants showed 96.5% with two failures. At 1 year, differences in probing depths, plaque accumulation, and Papilla Bleeding Index were not statistically significant. Conclusion: After 1 year of loading, no statistically significant differences in MBL, implant survival, or peri‐implant health were found between zirconia and titanium implants, indicating no clinical superiority. Zirconia implants may therefore be considered a viable alternative in single‐tooth implant restorations. Trial Registration: The study is registered at the German Clinical Trial Register (No. DRKS 00013209) as well as at the Federal Office of Public Health's (FOPH) portal for human research in Switzerland (kofam.ch)
- Open Access
- 1 January 2026
- Published by XMLink in Journal of Periodontal & Implant Science
- Vol. 56 (1) , 57-71
Profilometric and radiographic analyses after early implant placement in sites with ridge preservation or spontaneous healing: 3-year follow-up of an exploratory randomized controlled trial
Müller NP, et al. J Periodontal Implant Sci. 2025 Jun;55:e26. https://doi.org/10.5051/jpis.2404280214
- 1 January 2026
- Published by XMLink in Journal of Periodontal & Implant Science
- Vol. 56 (1) , 57-71
Open AccessProfilometric and radiographic analyses after early implant placement in sites with ridge preservation or spontaneous healing: 3-year follow-up of an exploratory randomized controlled trial
Müller NP, et al. J Periodontal Implant Sci. 2025 Jun;55:e26. https://doi.org/10.5051/jpis.2404280214
- Open Access
- 26 September 2025
- Published by Wiley in Clinical Oral Implants Research
- Vol. 37 (1) , 57-68
Long‐Term Performance of Bi‐Layered Single Crowns Supported by Zirconia Implants: 7.5‐Year Results of a Two‐Center Prospective Cohort Study
Objective: To evaluate the survival and success rates of veneered zirconia‐based single crowns (SCs) supported by zirconia implants in posterior regions, along with patient‐reported outcomes, over 7.5 years. Materials and Methods: Forty‐five patients received zirconia implant‐supported posterior SCs ( n = 45) composed of zirconia frameworks layered with a leucite‐reinforced feldspathic ceramic. At 7.5 years, clinical parameters and technical complications were assessed. Technical success was determined according to modified United States Public Health Service (USPHS) criteria. Patient‐reported outcome measures (PROs) were evaluated using visual analog scales (VAS). Wilcoxon matched‐pairs signed‐rank test, mixed‐effects ordered logistic regression, and linear mixed models analyzed time‐dependent effects. Results: Thirty SCs ( n = 30) could be evaluated at the 7.5‐year follow‐up (mean: 92.1 ± 3.4 months). Kaplan–Meier survival for SCs was 97.5% [95% CI: 83.6%–99.6%]. Success dropped to 79.4% [63.0%–89.2%] due to reconstructions with major chipping ( n = 3), occlusal roughness ( n = 7), marginal crevice ( n = 1), and over‐contouring ( n = 2). PROs showed significant improvements from pre‐treatment to delivery (VAS scores: 93%–97%) and remained stable throughout the follow‐up period. Conclusion: Veneered zirconia‐based SCs supported by zirconia implants in posterior sites demonstrated high survival rates and consistently met patients' functional and esthetic expectations. Despite these favorable outcomes, the considerable incidence of technical complications warrants further investigation through long‐term clinical studies. Clinical Significance: While veneered zirconia crowns offer favorable esthetics, their susceptibility to chipping in posterior regions suggests that monolithic alternatives may be preferable. Further research is needed to optimize material selection and minimize technical complications.
- 26 September 2025
- Published by Wiley in Clinical Oral Implants Research
- Vol. 37 (1) , 57-68
Open AccessLong‐Term Performance of Bi‐Layered Single Crowns Supported by Zirconia Implants: 7.5‐Year Results of a Two‐Center Prospective Cohort Study
Objective: To evaluate the survival and success rates of veneered zirconia‐based single crowns (SCs) supported by zirconia implants in posterior regions, along with patient‐reported outcomes, over 7.5 years. Materials and Methods: Forty‐five patients received zirconia implant‐supported posterior SCs ( n = 45) composed of zirconia frameworks layered with a leucite‐reinforced feldspathic ceramic. At 7.5 years, clinical parameters and technical complications were assessed. Technical success was determined according to modified United States Public Health Service (USPHS) criteria. Patient‐reported outcome measures (PROs) were evaluated using visual analog scales (VAS). Wilcoxon matched‐pairs signed‐rank test, mixed‐effects ordered logistic regression, and linear mixed models analyzed time‐dependent effects. Results: Thirty SCs ( n = 30) could be evaluated at the 7.5‐year follow‐up (mean: 92.1 ± 3.4 months). Kaplan–Meier survival for SCs was 97.5% [95% CI: 83.6%–99.6%]. Success dropped to 79.4% [63.0%–89.2%] due to reconstructions with major chipping ( n = 3), occlusal roughness ( n = 7), marginal crevice ( n = 1), and over‐contouring ( n = 2). PROs showed significant improvements from pre‐treatment to delivery (VAS scores: 93%–97%) and remained stable throughout the follow‐up period. Conclusion: Veneered zirconia‐based SCs supported by zirconia implants in posterior sites demonstrated high survival rates and consistently met patients' functional and esthetic expectations. Despite these favorable outcomes, the considerable incidence of technical complications warrants further investigation through long‐term clinical studies. Clinical Significance: While veneered zirconia crowns offer favorable esthetics, their susceptibility to chipping in posterior regions suggests that monolithic alternatives may be preferable. Further research is needed to optimize material selection and minimize technical complications.