Angelo Ricardo Favaro Pipi
Research Subjects
Angelo Ricardo Favaro Pipi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Aroldo Geraldo Magdalena
Universidade Estadual Paulista, Brasil
4 shared publications - Adalgisa Rodrigues de Andrade
Department of Chemistry Faculty of Philosophy Sciences and Letters at Ribeirão Preto (FFCLRP) University of São Paulo (USP) Ribeirão Preto São Paulo Brazil
3 shared publications - Marina Piacenti-Silva
Department of Physics and Meteorology, School of Sciences, São Paulo State University–UNESP, Bauru, São Paulo, Brazil
3 shared publications - Emerson Leandro-Silva
Universidade Estadual Paulista, Brasil
2 shared publications - Enric Brillas
Departament de Ciència de Materials i Química Física, Facultat de Química, Universitat de Barcelona, Martí i Franquès 1-11, 08028 Barcelona, Spain
2 shared publications - Ignasi Sirés
Laboratori d'Electroquímica dels Materials i del Medi Ambient, Departament de Ciència de Materials i Química Física, Secció de Química Física, Facultat de Química, Universitat de Barcelona, 08028 Barcelona, Spain
2 shared publications
Latest Publications
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 27 (3)
Study of simultaneous adsorption efficiency of metals using modified organic and synthetic adsorbents
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 27 (3)
Open AccessStudy of simultaneous adsorption efficiency of metals using modified organic and synthetic adsorbents
- Open Access
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 25 (2)
Aplicação dos modelos de Langmuir e Freundlich no estudo da casca de banana como bioadsorvente de cobre (II) em meio aquoso
RESUMO A contaminação de água por metais pesados ainda é um grande risco de poluição. Diante deste cenário, processos adsortivos e diversos materiais adsorventes têm sido empregados para descontaminação. Dentre os materiais sintéticos e bioadsorventes empregados, os sintéticos são eficientes na remoção de metais em solução aquosa, contudo agregam alto custo comparados aos bioadsorventes. Os bioadsorventes são em geral provenientes de biomassa agroindustrial e vêm se destacando por serem abundantes, renováveis e com custo acessível para remediação de efluentes com metais pesados na forma ionizada. Dentre os bioadsorventes, a casca da banana reúne grupos funcionais capazes de adsorver íons de metais pesados em meio aquoso. Dessa forma, este trabalho descreve o método de preparação e caraterização da farinha da casca de banana (FCB) através das técnicas de Microscopia Eletrônica de Varredura (MEV), Espectroscopia Dispersiva em Energia de Raios X e Espectroscopia na Região do Infravermelho bem como estudos da capacidade adsortiva desse bioadsorvente para o íon Cu (II) em soluções aquosas. Os estudos de adsorção foram realizados através da avaliação das isotermas experimentais de adsorção em função do tempo de contato, variações do pH, temperatura e concentração de íon Cu (II) na solução pela técnica de batelada. As isotermas experimentais foram submetidas aos modelos matemáticos de isotermas de Langmuir e Freundlich. A capacidade máxima de adsorção alcançada pela FCB foi 15,1 mg de Cu (II) por grama de FCB, pH ajustado em 5 e tempo de saturação bastante rápido, em torno de 10 minutos. A isoterma de Langmuir foi o modelo que melhor se ajustou ao processo adsortivo de cobre (II) pela FCB e o preenchimento dos sítios ativos foi na faixa de 98,7%.
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 25 (2)
Open AccessAplicação dos modelos de Langmuir e Freundlich no estudo da casca de banana como bioadsorvente de cobre (II) em meio aquoso
RESUMO A contaminação de água por metais pesados ainda é um grande risco de poluição. Diante deste cenário, processos adsortivos e diversos materiais adsorventes têm sido empregados para descontaminação. Dentre os materiais sintéticos e bioadsorventes empregados, os sintéticos são eficientes na remoção de metais em solução aquosa, contudo agregam alto custo comparados aos bioadsorventes. Os bioadsorventes são em geral provenientes de biomassa agroindustrial e vêm se destacando por serem abundantes, renováveis e com custo acessível para remediação de efluentes com metais pesados na forma ionizada. Dentre os bioadsorventes, a casca da banana reúne grupos funcionais capazes de adsorver íons de metais pesados em meio aquoso. Dessa forma, este trabalho descreve o método de preparação e caraterização da farinha da casca de banana (FCB) através das técnicas de Microscopia Eletrônica de Varredura (MEV), Espectroscopia Dispersiva em Energia de Raios X e Espectroscopia na Região do Infravermelho bem como estudos da capacidade adsortiva desse bioadsorvente para o íon Cu (II) em soluções aquosas. Os estudos de adsorção foram realizados através da avaliação das isotermas experimentais de adsorção em função do tempo de contato, variações do pH, temperatura e concentração de íon Cu (II) na solução pela técnica de batelada. As isotermas experimentais foram submetidas aos modelos matemáticos de isotermas de Langmuir e Freundlich. A capacidade máxima de adsorção alcançada pela FCB foi 15,1 mg de Cu (II) por grama de FCB, pH ajustado em 5 e tempo de saturação bastante rápido, em torno de 10 minutos. A isoterma de Langmuir foi o modelo que melhor se ajustou ao processo adsortivo de cobre (II) pela FCB e o preenchimento dos sítios ativos foi na faixa de 98,7%.
- 3 April 2018
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 190 (5) , 263
Evaluation of metal removal efficiency and its influence in the physicochemical parameters at two sewage treatment plants
In sewage treatment plants, physicochemical parameters are highly controlled since treated sewage can be returned to water bodies or reused. In addition, pollutants such as heavy metals also deserve attention due to their potential toxicity. In general, these characteristics of sewage and treated water are evaluated independently, with the support of Brazilian legislation that does not require a routine for the analysis of metals as frequent as for the physicochemical parameters. In this work, 66 samples of raw sewage, treated sewage, and effluents from two treatment plants in the city of Bauru, São Paulo, Brazil, were evaluated to assess the efficiency of the treatment plants in the removal of metals. In addition, the influence of these pollutants on the quantification of physicochemical parameters was evaluated. The quantification of metals was performed using inductively coupled plasma optical spectroscopy (ICP-OES), and Spearman’s test was applied to evaluate correlation between physicochemical parameters and metal content. The main metals found in the samples were Ba, Mn, Zn, Cu, Se, Fe, and Al. The results indicate that concentrations of metals in the aquatic environment can significantly affect the physicochemical parameters, since high concentrations of metals can interfere mainly in the pH, chemical oxygen demand, and dissolved oxygen.
- 3 April 2018
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 190 (5) , 263
Evaluation of metal removal efficiency and its influence in the physicochemical parameters at two sewage treatment plants
In sewage treatment plants, physicochemical parameters are highly controlled since treated sewage can be returned to water bodies or reused. In addition, pollutants such as heavy metals also deserve attention due to their potential toxicity. In general, these characteristics of sewage and treated water are evaluated independently, with the support of Brazilian legislation that does not require a routine for the analysis of metals as frequent as for the physicochemical parameters. In this work, 66 samples of raw sewage, treated sewage, and effluents from two treatment plants in the city of Bauru, São Paulo, Brazil, were evaluated to assess the efficiency of the treatment plants in the removal of metals. In addition, the influence of these pollutants on the quantification of physicochemical parameters was evaluated. The quantification of metals was performed using inductively coupled plasma optical spectroscopy (ICP-OES), and Spearman’s test was applied to evaluate correlation between physicochemical parameters and metal content. The main metals found in the samples were Ba, Mn, Zn, Cu, Se, Fe, and Al. The results indicate that concentrations of metals in the aquatic environment can significantly affect the physicochemical parameters, since high concentrations of metals can interfere mainly in the pH, chemical oxygen demand, and dissolved oxygen.
- 1 February 2018
- Published by Elsevier in Journal of Physics and Chemistry of Solids
- Vol. 113, 5-10
EDTA-functionalized Fe3O4 nanoparticles
- 1 February 2018
- Published by Elsevier in Journal of Physics and Chemistry of Solids
- Vol. 113, 5-10
EDTA-functionalized Fe3O4 nanoparticles
- Open Access
- 20 March 2017
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 20 (3) , 628-638
Photocatalytic Activity and RNO Dye Degradation of Nitrogen-doped TiO2 Prepared by Ionothermal Synthesis
This work concerns the preparation a nitrogen-doped TiO2 by ionothermal synthesis methods and the photocatalytic studies. In this procedure, alkoxide was used as a titanium source, and a deep eutectic mixture of choline chloride and urea (molar ratio 1:2) served as a solvent and source of nitrogen. Different samples were synthesized varying the percentages of the eutectic mixture, titanium butoxide, and water, as well as temperature and reaction time. The catalysts were characterized by X-ray diffraction, Raman spectrometry, scanning electron microscopy, and diffuse reflectance spectroscopy. N-doping was confirmed by X-ray photoelectron spectroscopy. The photocatalytic activity of the N-TiO2 nanoparticles was evaluated in the oxidation of N,N-dimethyl-4-nitrosoaniline (RNO) dye. The best photocatalytic activity under illumination by UV and visible light was found for the catalysts prepared under reflux in the presence of water, and for the catalysts prepared hydrothermally using intermediate percentages of the nitrogen source (the eutectic mixture).
- 20 March 2017
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 20 (3) , 628-638
Open AccessPhotocatalytic Activity and RNO Dye Degradation of Nitrogen-doped TiO2 Prepared by Ionothermal Synthesis
This work concerns the preparation a nitrogen-doped TiO2 by ionothermal synthesis methods and the photocatalytic studies. In this procedure, alkoxide was used as a titanium source, and a deep eutectic mixture of choline chloride and urea (molar ratio 1:2) served as a solvent and source of nitrogen. Different samples were synthesized varying the percentages of the eutectic mixture, titanium butoxide, and water, as well as temperature and reaction time. The catalysts were characterized by X-ray diffraction, Raman spectrometry, scanning electron microscopy, and diffuse reflectance spectroscopy. N-doping was confirmed by X-ray photoelectron spectroscopy. The photocatalytic activity of the N-TiO2 nanoparticles was evaluated in the oxidation of N,N-dimethyl-4-nitrosoaniline (RNO) dye. The best photocatalytic activity under illumination by UV and visible light was found for the catalysts prepared under reflux in the presence of water, and for the catalysts prepared hydrothermally using intermediate percentages of the nitrogen source (the eutectic mixture).
- 1 August 2014
- Published by Elsevier in Separation and Purification Technology
- Vol. 132, 674-683
Total removal of alachlor from water by electrochemical processes
- 1 August 2014
- Published by Elsevier in Separation and Purification Technology
- Vol. 132, 674-683
Total removal of alachlor from water by electrochemical processes
- 1 August 2014
- Published by Elsevier in Chemosphere
- Vol. 109, 49-55
Application of electrochemical advanced oxidation processes to the mineralization of the herbicide diuron
- 1 August 2014
- Published by Elsevier in Chemosphere
- Vol. 109, 49-55
Application of electrochemical advanced oxidation processes to the mineralization of the herbicide diuron
- Open Access
- 1 January 2013
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
- Vol. 24 (8) , 1259-+
Electrochemical Degradation of Diuron in Chloride Medium using DSA ® Based Anodes
- 1 January 2013
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
- Vol. 24 (8) , 1259-+
Open AccessElectrochemical Degradation of Diuron in Chloride Medium using DSA ® Based Anodes
- 1 April 2011
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 41 (7) , 787-793
Voltammetric studies of titanium (IV) phosphate modified with copper hexacyanoferrate and electroanalytical determination of N-acetylcysteine
- 1 April 2011
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 41 (7) , 787-793
Voltammetric studies of titanium (IV) phosphate modified with copper hexacyanoferrate and electroanalytical determination of N-acetylcysteine