MAMohammad Reza Amini

Mohammad Reza Amini

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mohammad Reza Amini has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Control Co-Design of Hydrokinetic Turbines Considering Dynamic–Hydrodynamic Coupling

    by Boxi Jiang, Mohammad Reza Amini, Yingqian Liao, Kartik Naik, Joaquim R. R. A. Martins, Jing Sun

    Hydrokinetic turbine (HKT) controllers are traditionally optimized after determining physical turbine variables. However, simultaneously varying controls and turbine shape by considering the interactions between the control space and the turbine shape can significantly enhance the system performance in contrast to the conventional sequential design approach. This article delves into this prospect by introducing a control co-design (CCD) framework tailored for this simultaneous optimization for a variable-speed HKT rotor. The proposed CCD framework integrates a dynamic–hydrodynamic model that captures the intricate interplay between hydrodynamic performance and control strategies for the HKT under time-varying flow profiles. We systematically investigate cases with diverse control constraints in a time-varying flow environment to explore the coupling between the control space and the physical system. We demonstrate the advantages of the CCD framework over the conventional sequential design methodology through comparative study cases. CCD optimization considering a single flow condition leads to an overly specialized design that underperforms at other off-design conditions. The stochastic nature of the flow thereby highlights the need to account for a broader range of flow speeds in the HKT design process. To address this challenge, we introduce a multipoint CCD optimization that accounts for the annual flow probability distribution. The multipoint CCD approach demonstrates higher annual energy extraction compared to optimizations based on a single flow condition.


  • Open Access

    Modeling and Control of Diesel Engine Emissions using Multi-layer Neural Networks and Economic Model Predictive Control

    by Jiadi Zhang, Xiao Li, Mohammad Reza Amini, Ilya Kolmanovsky, Munechika Tsutsumi, Hayato Nakada

    This paper presents the results of developing a multi-layer Neural Network (NN) to represent diesel engine emissions and integrating this NN into control design. Firstly, a NN is trained and validated to simultaneously predict oxides of nitrogen (N Ox) and Soot using both transient and steady-state data. Based on the input-output correlation analysis, inputs to NN with the highest influence on the emissions are selected while keeping the NN structure simple. Secondly, a co-simulation framework is implemented to integrate the NN emissions model with a model of a diesel engine airpath system built in GT-Power and used to identify a low-order linear parameter-varying (LPV) model for emissions prediction. Finally, an economic supervisory model predictive controller (MPC) is developed using the LPV emissions model to adjust setpoints to an inner-loop airpath tracking MPC. Simulation results are reported illustrating the capability of the resulting controller to reduce N Ox, meet the target Soot limit, and track the adjusted intake manifold pressure and exhaust gas recirculation (EGR) rate targets.

  • Robust Thermal Management of Electric Vehicles Using Model Predictive Control With Adaptive Optimization Horizon and Location-Dependent Constraint Handling Strategies

    by Qiuhao Hu, Mohammad Reza Amini, Ashley Wiese, Ronald Semel, Julia Buckland Seeds, Ilya Kolmanovsky, Jing Sun

    The thermal management system (TMS) in electric vehicles (EVs) consumes a considerable amount of energy for maintaining the battery and cabin temperatures within the desired range. This energy consumption can significantly impact the vehicle’s driving range. In this article, a model predictive control (MPC) is applied to minimize the energy consumption of the TMS while enforcing power and thermal constraints. The MPC-based thermal management strategy relies on a control-oriented model that captures the dynamics of the powertrain and thermal subsystems of an EV, as well as the coupling between these subsystems at different timescales. The relatively slow dynamics of the thermal systems call for a long prediction horizon to achieve the best performance. However, large uncertainties associated with speed prediction and preview information significantly impact the performance and robustness. In this study, an extensive sensitivity analysis is conducted to: 1) determine the key traffic and speed features over a long prediction horizon with a significant influence on the EV optimal performance and 2) study the impact of uncertainties associated with predicting these key traffic and speed features on EV performance in terms of energy efficiency and constraint enforcement. The MPC-based thermal management strategy is evaluated using real-world traffic data. To improve the robustness of the algorithm in the presence of uncertainties, a location-dependent constraint is proposed and integrated into the MPC-based thermal management strategy. The simulation results demonstrate that the location-dependent constraint enhances the capacity to enforce the battery temperature constraint, resulting in improved algorithmic robustness against uncertainties in preview information.


  • A Data-Driven Spatio-Temporal Speed Prediction Framework for Energy Management of Connected Vehicles

    by Mohammad Reza Amini, Qiuhao Hu, Ashley Wiese, Ilya Kolmanovsky, Julia Buckland Seeds, Jing Sun

    We present an integrated spatio-temporal framework for multi-range traction power and speed prediction for connected vehicles (CVs). It combines data-driven and model-based strategies to enable CVs energy efficiency optimization. The proposed framework focuses on urban arterial corridors with signalized intersections, and leverages the historical and real-time data collected from CVs and infrastructure to predict location-specific traction loads (e.g. acceleration at intersections), and augment them with time-specific speed profiles (e.g., stop duration at intersections). A Bayesian network is developed to provide a long-term load prediction informed by probabilistic analysis of historical traffic data at intersections and between intersections. Moreover, a shockwave profile model is adopted for modeling the queuing process at intersections by leveraging vehicle-to-infrastructure (V2I) communications, providing a short-range prediction of the vehicle speed with an enhanced accuracy. The benefits of the proposed load prediction framework are demonstrated for energy management of connected hybrid electric vehicles (C-HEVs). By incorporating the predicted loads into a multi-horizon model predictive controller (MPC), integrated power and thermal management of light-duty C-HEVs is enabled over real-world driving cycles, demonstrating a near globally-optimal fuel consumption over the entire trip with a $<$ 1% deviation from dynamic programming (DP) results.


  • Open Access

    Development of a Model Predictive Airpath Controller for a Diesel Engine on a High-Fidelity Engine Model with Transient Thermal Dynamics

    by Jiadi Zhang, Mohammad Reza Amini, Ilya Kolmanovsky, Munechika Tsutsumi, Hayato Nakada

    This paper presents the results of a model predictive controller (MPC) development for diesel engine air-path regulation. The control objective is to track the intake manifold pressure and exhaust gas recirculation (EGR) rate targets by manipulating the EGR valve and variable geometry turbine (VGT) while satisfying state and control constraints. The MPC controller is designed and verified using a high-fidelity engine model in GT-Power. The controller exploits a low-order rate-based linear parameter-varying (LPV) model for prediction which is identified from transient response data generated by the GT-Power model. It is shown that transient engine thermal dynamics influence the airpath dynamics, specifically the intake manifold pressure response, however, MPC demonstrates robustness against inaccuracies in modeling these thermal dynamics. In particular, we show that MPC can be successfully implemented using a rate-based prediction model with two inputs (EGR and VGT positions) identified from data with steady-state wall temperature dynamics, however, closed-loop performance can be improved if a prediction model (i) is identified from data with transient thermal dynamics, and (ii) has the fuel injection rate as extra model input. Further, the MPC calibration process across the engine operating range to achieve improved performance is addressed. As the MPC calibration is shown to be sensitive to the operating conditions, a fast calibration process is proposed.

  • A Multirange Vehicle Speed Prediction With Application to Model Predictive Control-Based Integrated Power and Thermal Management of Connected Hybrid Electric Vehicles

    by Qiuhao Hu, Mohammad Reza Amini, Ashley Wiese, Julia Buckland Seeds, Ilya Kolmanovsky, Jing Sun

    Connectivity and automated driving technologies have opened up new research directions in the energy management of vehicles which exploit look-ahead preview and enhance the situational awareness. Despite this advancement, the vehicle speed preview that can be obtained from vehicle-to-vehicle/infrastructure (V2V/I) communications is often limited to a relatively short time-horizon. The vehicular energy systems, specifically those of the electrified vehicles, consist of multiple interacting power and thermal subsystems that respond over different time-scales. Consequently, their optimal energy management can greatly benefit from long-term speed prediction beyond that available through V2V/I communications. Accurately extending the look-ahead preview, on the other hand, is fundamentally challenging due to the dynamic nature of the traffic environment. To address this challenge, we propose a data-driven multirange vehicle speed prediction strategy for arterial corridors with signalized intersections, providing the vehicle speed preview for three different ranges, i.e., short-, medium-, and long-range. The short-range preview is obtained by V2V/I communications. The medium-range preview is realized using a neural network (NN), while the long-range preview is predicted based on a Bayesian network (BN). The predictions are updated in real-time based on the current state of traffic and incorporated into a multihorizon model predictive control (MH-MPC) for integrated power and thermal management (iPTM) of connected vehicles. The results of design and evaluation of the performance of the proposed data-informed MH-MPC for iPTM of connected hybrid electric vehicles (HEVs) using traffic data for real-world city driving are reported.


  • Multihorizon Model Predictive Control: An Application to Integrated Power and Thermal Management of Connected Hybrid Electric Vehicles

    by Qiuhao Hu, Mohammad Reza Amini, Ilya Kolmanovsky, Jing Sun, Ashley Wiese, Julia Buckland Seeds

    In this article, we propose a multihorizon model predictive control (MH-MPC) approach with applications to integrated power and thermal management (iPTM) of connected hybrid electric vehicles (HEVs). The proposed MH-MPC leverages preview and optimization over a short receding and a long shrinking horizon, where the accuracy of preview, model, and integration can be different over different horizons. Compared with a conventional MPC-based approach with a short prediction horizon and terminal cost, the MH-MPC improves fuel consumption to a level comparable to dynamic programming (DP) while still being computationally affordable. A statistical sensitivity analysis over real-world city driving cycles is conducted to demonstrate the robustness of MH-MPC to moderate levels of uncertainty in the long-term preview.


  • A Two-Layer Real-Time Optimization Control Strategy for Integrated Battery Thermal Management and HVAC System in Connected and Automated HEVs

    by Zhao Shuofeng, Mohammad Reza Amini, Jing Sun, Chunting Chris Mi

    With the increase in the capacity and power rating of batteries in today's HEVs and EVs, the battery thermal management (BTM) system bears growing importance in vehicle safety and efficiency. A practical BTM system is commonly coupled with the passenger cabin heating-ventilation-air-conditioning (HVAC) system, which makes a major energy consumer and a challenging control object. Thanks to the connected and automated vehicle (CAV) technology, predictions of the vehicle speed profile and power trajectory can be obtained, providing the possibility for predictive control of the BTM and HVAC coupled system in order to maintain battery safety, passenger comfort, and to reduce energy consumption. However, the tradeoff among higher energy saving potential and wider control range from a long and sparse horizon, and higher accuracy from a short and dense horizon is inevitable in the conventional predictive control. In this paper, a two-layer predictive control strategy for warm/hot weather is proposed to address the aforementioned tradeoff. The upper layer controller firstly plans the optimized battery temperature trajectory according to the look-ahead speed preview and battery power profiles provided by the CAV network and the integrated BTM and HVAC system efficiency surface from off-line data. Then the lower layer model predictive controller tracks the planned trajectory and cabin temperature reference while enforcing the energy consumption optimization. Simulation results demonstrate that the proposed strategy exhibits accurate battery and passenger cabin temperature reference tracking while achieving up to {\color{red}10.47\% HVAC energy saving comparing to a baseline control strategy with UDDS profile and typical driving conditions}. Implementation of the proposed strategy on a real-time vehicle emulator based on rapid control prototyping (RCP) and hardware-in-the-loop (HIL) platforms demonstrates the real-world implementation capability of the proposed two-layer framework.


  • Open Access

    Stochastic Drift Counteraction Optimal Control of a Fuel Cell-Powered Small Unmanned Aerial Vehicle

    by Jiadi Zhang, Ilya Kolmanovsky, Mohammad Reza Amini

    This paper investigates optimal power management of a fuel cell hybrid small unmanned aerial vehicle (sUAV) from the perspective of endurance (time of flight) maximization in a stochastic environment. Stochastic drift counteraction optimal control is exploited to obtain an optimal policy for power management that coordinates the operation of the fuel cell and battery to maximize the expected flight time while accounting for the limits on the rate of change of fuel cell power output and the orientation dependence of fuel cell efficiency. The proposed power management strategy accounts for known statistics in transitions of propeller power and climb angle during the mission, but does not require the exact preview of their time histories. The optimal control policy is generated offline using value iterations implemented in Cython, demonstrating an order of magnitude speedup as compared to MATLAB. It is also shown that the value iterations can be further sped up using a discount factor, but at the cost of decreased performance. Simulation results for a 1.5 kg sUAV are reported that illustrate the optimal coordination between the fuel cell and the battery during aircraft maneuvers, including a turnpike in the battery state of charge (SOC) trajectory. As the fuel cell is not able to support fast changes in power output, the optimal policy is shown to charge the battery to the turnpike value if starting from a low initial SOC value. If starting from a high SOC value, the battery energy is used till a turnpike value of the SOC is reached with further discharge delayed to later in the flight. For the specific scenarios and simulated sUAV parameters considered, the results indicate the capability of up to 2.7 h of flight time.