Yves Rolain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yves Rolain has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Dries Peumans
Department of Fundamental Electricity and Instrumentation, Vrije Universiteit Brussel, Brussels, Belgium
9 shared publications - Gerd Vandersteen
Vrije Universiteit Brussel, Brussels, Belgium
7 shared publications - Francesco Ferranti
Department of Applied Physics and Photonics, Brussels Photonics, Vrije Universiteit Brussel and Flanders Make, Brussels, Belgium
5 shared publications - Johan Schoukens
Vrije Universiteit Brussel, Brussels, Belgium
5 shared publications - R. Pintelon
Department of Electrical Engineering, Vrije Universiteit Brussel, Brussels, Belgium
5 shared publications - John Lataire
Department of ELEC, Vrije Universiteit Brussel, Brussels, Belgium
4 shared publications
Latest Publications
- 19 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 27 (1) , 51-63
Toward Interpretable Digital Predistortion: A Frequency-Domain Behavioral Approach
We introduce a compact frequency-domain-based model for digital predistortion (DPD) that emphasizes interpretability and efficiency. The model relies on two key hyperparameters: the order of nonlinear Volterra kernels, which controls the level of nonlinearity, and the complexity of the local polynomial used to capture frequency dependencies around the carrier. This structure simplifies traditional modeling approaches while maintaining high accuracy. The frequency-domain formulation ensures band-limited predistortion, making it well-suited for spectral control.
- 19 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 27 (1) , 51-63
Toward Interpretable Digital Predistortion: A Frequency-Domain Behavioral Approach
We introduce a compact frequency-domain-based model for digital predistortion (DPD) that emphasizes interpretability and efficiency. The model relies on two key hyperparameters: the order of nonlinear Volterra kernels, which controls the level of nonlinearity, and the complexity of the local polynomial used to capture frequency dependencies around the carrier. This structure simplifies traditional modeling approaches while maintaining high accuracy. The frequency-domain formulation ensures band-limited predistortion, making it well-suited for spectral control.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-7
Power Sweep Stitching in Modulated RF Experiments With Automatic Ranging
Present-day modulated RF experiments that perform power sweeps use a fixed amplitude range to avoid discontinuities induced by range-switching in the acquisition channels of the measurement instrument. However, working with a fixed amplitude range has its shortcomings as it limits the dynamic range of the swept measurements. That’s why this work proposes to do power sweeps with automatic ranging and tackle the problem of these switching discontinuities. To this end, a noise calibration procedure is developed to get rid of the discontinuities by stitching the figures-of-merit in the power sweep. The developed calibration method is experimentally validated using a power amplifier as a device under test. The calibrated results are compared and discussed with the uncalibrated results to show the impact and the improvement of the proposed calibration.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-7
Power Sweep Stitching in Modulated RF Experiments With Automatic Ranging
Present-day modulated RF experiments that perform power sweeps use a fixed amplitude range to avoid discontinuities induced by range-switching in the acquisition channels of the measurement instrument. However, working with a fixed amplitude range has its shortcomings as it limits the dynamic range of the swept measurements. That’s why this work proposes to do power sweeps with automatic ranging and tackle the problem of these switching discontinuities. To this end, a noise calibration procedure is developed to get rid of the discontinuities by stitching the figures-of-merit in the power sweep. The developed calibration method is experimentally validated using a power amplifier as a device under test. The calibrated results are compared and discussed with the uncalibrated results to show the impact and the improvement of the proposed calibration.
- 8 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 32 (4) , 1923-1929
Equivalent Modeling of Multilayered Conductive Composite Materials for EMI Shielding Applications
This paper develops a single-layer equivalent model for multilayered shielding materials using measurements of complex permittivity and permeability. Through rectangular waveguide Transmission/Reflection measurements, electromagnetic parameters and shielding effectiveness (SE) are evaluated. The aim is to establish an equivalent single-layer structure matching the SE of the original multilayered structure. Initial validation involves testing on simulated and experimental data of a reference single-layer material. The methodology is then applied to a novel three-layer PANI-Fe3O4/CNT/PANI-Fe3O4 composite material. Unlike conventional approaches requiring new multilayered material synthesis, this approach combines existing and widely available materials, simplifying characterization and reducing cost and complexity to achieve the desired SE. Comparative analysis with analytical SE values from Transmission Line Matrix (TLM) formulation is conducted using simulated data. The proposed approach is validated within the X-band frequency range using analytical TLM formulation, numerical simulation, and experimental data. The proposed approach exhibits good performance in reconstructing the equivalent model.
- 8 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 32 (4) , 1923-1929
Equivalent Modeling of Multilayered Conductive Composite Materials for EMI Shielding Applications
This paper develops a single-layer equivalent model for multilayered shielding materials using measurements of complex permittivity and permeability. Through rectangular waveguide Transmission/Reflection measurements, electromagnetic parameters and shielding effectiveness (SE) are evaluated. The aim is to establish an equivalent single-layer structure matching the SE of the original multilayered structure. Initial validation involves testing on simulated and experimental data of a reference single-layer material. The methodology is then applied to a novel three-layer PANI-Fe3O4/CNT/PANI-Fe3O4 composite material. Unlike conventional approaches requiring new multilayered material synthesis, this approach combines existing and widely available materials, simplifying characterization and reducing cost and complexity to achieve the desired SE. Comparative analysis with analytical SE values from Transmission Line Matrix (TLM) formulation is conducted using simulated data. The proposed approach is validated within the X-band frequency range using analytical TLM formulation, numerical simulation, and experimental data. The proposed approach exhibits good performance in reconstructing the equivalent model.
- 24 October 2024
- Published by Elsevier in Additive Manufacturing
- Vol. 94
Direct electrodeposition on conductive polymer structures for microwave device manufacturing
- 24 October 2024
- Published by Elsevier in Additive Manufacturing
- Vol. 94
Direct electrodeposition on conductive polymer structures for microwave device manufacturing
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 3128-3132
Accurate Radiation Pattern Prediction of Phased Array Antennas Using Hadamard-Based Excitations
The radiation patterns of phased array antennas are commonly characterised through embedded element patterns, wherein only one element is excited for each measurement at a time. However, this approach is suboptimal as it does not reflect the typical operation of a fully active array. To address this limitation, a Hadamard matrix based-method is proposed that uses orthogonal measurements of the fully excited array to derive single element patterns. This method provides a superior representation of the radiation properties of the fully active antenna array and its mutual coupling effects, while providing measurements with a greater signal-to-noise ratio. The element patterns from embedded elements and the Hadamard method are evaluated and used to predict beamforming patterns using over-the-air measurements.
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 3128-3132
Accurate Radiation Pattern Prediction of Phased Array Antennas Using Hadamard-Based Excitations
The radiation patterns of phased array antennas are commonly characterised through embedded element patterns, wherein only one element is excited for each measurement at a time. However, this approach is suboptimal as it does not reflect the typical operation of a fully active array. To address this limitation, a Hadamard matrix based-method is proposed that uses orthogonal measurements of the fully excited array to derive single element patterns. This method provides a superior representation of the radiation properties of the fully active antenna array and its mutual coupling effects, while providing measurements with a greater signal-to-noise ratio. The element patterns from embedded elements and the Hadamard method are evaluated and used to predict beamforming patterns using over-the-air measurements.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (8) , 4568-4578
Adaptive Frequency Sampling Based on Local Rational Modeling for Microwave Electromagnetic Simulations
Performing simulations with electromagnetic (EM) solvers can be a computationally complex task that is time consuming and resource demanding. Adaptive frequency sampling (AFS) techniques are very effective in reducing the computational complexity of frequency-domain simulations performed by EM solvers. In this work, we propose a novel AFS technique based on local rational models. This brings multiple advantages, such as accurate and efficient model uncertainty estimation, the local refinement of subintervals of the full frequency range of interest, and suitability toward parallel computing. Multiple numerical examples thoroughly validate the proposed technique. The local rational models can also be used as an accurate frequency-domain macromodeling technique after the AFS process is completed.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (8) , 4568-4578
Adaptive Frequency Sampling Based on Local Rational Modeling for Microwave Electromagnetic Simulations
Performing simulations with electromagnetic (EM) solvers can be a computationally complex task that is time consuming and resource demanding. Adaptive frequency sampling (AFS) techniques are very effective in reducing the computational complexity of frequency-domain simulations performed by EM solvers. In this work, we propose a novel AFS technique based on local rational models. This brings multiple advantages, such as accurate and efficient model uncertainty estimation, the local refinement of subintervals of the full frequency range of interest, and suitability toward parallel computing. Multiple numerical examples thoroughly validate the proposed technique. The local rational models can also be used as an accurate frequency-domain macromodeling technique after the AFS process is completed.
- 27 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (6) , 3701-3710
ROVA: A Practical, Parsimonious Volterra Model for Modulated Microwave Systems
This article presents a novel Volterra model particularly suited to describe modulated microwave systems. The seRies expansiOn of the Volterra Approximation (ROVA), (ReeksOntwikkeling van de Volterra Approximatie in Dutch) model uses the Taylor series expansion of the frequency-domain Volterra kernels and their symmetries to avoid a combinatorical explosion in model parameters. ROVA is moreover linear in its model parameters and can hence be solved in linear least squares sense. It is parsimonious compared to other state-of-the-art models used for similar applications. Additionally, the interpretability of ROVA avoids the need for heuristics to tune its hyperparameters. The performance of the ROVA approach is compared to current state-of-the-art memory polynomials. Simulation and experimental validation on power amplifiers indicate that ROVA outperforms the memory polynomials with less model parameters and lower modeling error.
- 27 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (6) , 3701-3710
ROVA: A Practical, Parsimonious Volterra Model for Modulated Microwave Systems
This article presents a novel Volterra model particularly suited to describe modulated microwave systems. The seRies expansiOn of the Volterra Approximation (ROVA), (ReeksOntwikkeling van de Volterra Approximatie in Dutch) model uses the Taylor series expansion of the frequency-domain Volterra kernels and their symmetries to avoid a combinatorical explosion in model parameters. ROVA is moreover linear in its model parameters and can hence be solved in linear least squares sense. It is parsimonious compared to other state-of-the-art models used for similar applications. Additionally, the interpretability of ROVA avoids the need for heuristics to tune its hyperparameters. The performance of the ROVA approach is compared to current state-of-the-art memory polynomials. Simulation and experimental validation on power amplifiers indicate that ROVA outperforms the memory polynomials with less model parameters and lower modeling error.
- 3 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-9
Forced Oscillation Technique Measurement Apparatus Using Fan-Speaker Hybrid
The number of patients suffering from asthma and chronic obstructive pulmonary disease (COPD) increases due to deteriorating air quality and smoking. A measurement technique known as the forced oscillation technique (FOT) helps physicians to assess the current state of their patient’s lungs. Measurement devices based on either fans or speakers have been developed in the past that can carry out this measurement, but their performance and/or robustness often fall short. This article proposes a combination of a fan- and speaker-based measurement apparatus that employs the FOT to help physicians diagnose patients with these diseases. First, we discuss the currently available measurement devices and their specific problems. Next, a fan-speaker hybrid measurement apparatus is proposed. This fan-speaker hybrid FOT measurement apparatus is then characterized and its performance is improved with a feed forward compensation. Finally, measurements on two test subjects with the proposed measurement apparatus are shown and discussed.
- 3 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-9
Forced Oscillation Technique Measurement Apparatus Using Fan-Speaker Hybrid
The number of patients suffering from asthma and chronic obstructive pulmonary disease (COPD) increases due to deteriorating air quality and smoking. A measurement technique known as the forced oscillation technique (FOT) helps physicians to assess the current state of their patient’s lungs. Measurement devices based on either fans or speakers have been developed in the past that can carry out this measurement, but their performance and/or robustness often fall short. This article proposes a combination of a fan- and speaker-based measurement apparatus that employs the FOT to help physicians diagnose patients with these diseases. First, we discuss the currently available measurement devices and their specific problems. Next, a fan-speaker hybrid measurement apparatus is proposed. This fan-speaker hybrid FOT measurement apparatus is then characterized and its performance is improved with a feed forward compensation. Finally, measurements on two test subjects with the proposed measurement apparatus are shown and discussed.
- 20 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-9
Adaptive Excitation Signals for Low-Frequency Forced Oscillation Technique Measurements in Patients
The low-frequency forced oscillation technique (FOT) has a high diagnostic potential for the detection of respiratory diseases. However, it is not yet widely accepted in clinical practice, partly because the natural breathing frequency usually interferes with the measurement, thus requiring patient-unfriendly breathing maneuvers. The presence of a subject’s breathing generally results in patient-unfriendly measurement protocols. These are needed to extract the important low-frequency information about the subject’s respiratory system. This work presents a technique enabling the application of low-frequency FOT during spontaneous breathing. This is accomplished by adding an external visual stimulus to encourage the subject to synchronize his/her breathing to the measurement apparatus, in combination with an excitation signal that is adapted to the subject’s natural breathing frequency. In this way, the contributions of the breathing and the excitation signal can be separated. This article discusses the implementation, testing, and actual measurement results in a clinical setting using this method.
- 20 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-9
Adaptive Excitation Signals for Low-Frequency Forced Oscillation Technique Measurements in Patients
The low-frequency forced oscillation technique (FOT) has a high diagnostic potential for the detection of respiratory diseases. However, it is not yet widely accepted in clinical practice, partly because the natural breathing frequency usually interferes with the measurement, thus requiring patient-unfriendly breathing maneuvers. The presence of a subject’s breathing generally results in patient-unfriendly measurement protocols. These are needed to extract the important low-frequency information about the subject’s respiratory system. This work presents a technique enabling the application of low-frequency FOT during spontaneous breathing. This is accomplished by adding an external visual stimulus to encourage the subject to synchronize his/her breathing to the measurement apparatus, in combination with an excitation signal that is adapted to the subject’s natural breathing frequency. In this way, the contributions of the breathing and the excitation signal can be separated. This article discusses the implementation, testing, and actual measurement results in a clinical setting using this method.
- 27 August 2020
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 63 (1) , 126-132
An equivalent circuit model for wide‐band analysis of defected ground structures with asymmetric slot and multiple slots
- 27 August 2020
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 63 (1) , 126-132
An equivalent circuit model for wide‐band analysis of defected ground structures with asymmetric slot and multiple slots