Giuseppe Perrone
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Giuseppe Perrone has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Donatello Cardone
Department of Engineering, University of Basilicata, 85100 Potenza, Italy
11 shared publications D Cardone
5 shared publicationsL Pardi
4 shared publicationsS Sofia
3 shared publicationsDonatello Cardone
2 shared publicationsGiuseppe Gesualdi
School of Engineering, University of Basilicata, Potenza, Italy
2 shared publications
Latest Publications
- 2 March 2022
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 27 (4) , 1069-1093
Modelling and Seismic Response Analysis of Existing Italian Residential RC Buildings Retrofitted by Seismic Isolation
The seismic performance of existing RC frame buildings seismically retrofitted by base isolation is examined. Two different types of isolation systems are considered, i.e.: rubber-based and friction-based isolation systems, respectively. Two different performance levels are examined, namely: Global collapse prevention and Usability preventing damage. Seismic performance is assessed by multi-stripe nonlinear time-history analysis, considering earthquake intensity levels with return period ranging from 10 to 100000 years. Results point out that seismic isolation works effectively in limiting damage well beyond the design limit state level while it shows a limited margin with respect to collapse beyond the design limit state level.
- 2 March 2022
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 27 (4) , 1069-1093
Modelling and Seismic Response Analysis of Existing Italian Residential RC Buildings Retrofitted by Seismic Isolation
The seismic performance of existing RC frame buildings seismically retrofitted by base isolation is examined. Two different types of isolation systems are considered, i.e.: rubber-based and friction-based isolation systems, respectively. Two different performance levels are examined, namely: Global collapse prevention and Usability preventing damage. Seismic performance is assessed by multi-stripe nonlinear time-history analysis, considering earthquake intensity levels with return period ranging from 10 to 100000 years. Results point out that seismic isolation works effectively in limiting damage well beyond the design limit state level while it shows a limited margin with respect to collapse beyond the design limit state level.
- 8 June 2020
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 24 (sup1) , 82-113
Displacement-Based Simplified Seismic Loss Assessment of Pre-70S RC Buildings
A Displacement-Based framework for the Simplified Seismic Loss Assessment of pre-70 RC buildings is presented. The attention is focused on the calculation of the Expected Annual Loss using results of traditional structural analyses within a closed-form expression. Comparisons with conventional approach proposed in the Italian guidelines for seismic classification, and rigorous probabilistic seismic performance assessment presented in FEMA-P85 are made for a number of case-studies. Results show that the proposed method performs better than the conventional approach and is aligned with the rigorous method, with errors less than 20%. Finally, preliminary considerations on how to incorporate indirect losses are made.
- 8 June 2020
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 24 (sup1) , 82-113
Displacement-Based Simplified Seismic Loss Assessment of Pre-70S RC Buildings
A Displacement-Based framework for the Simplified Seismic Loss Assessment of pre-70 RC buildings is presented. The attention is focused on the calculation of the Expected Annual Loss using results of traditional structural analyses within a closed-form expression. Comparisons with conventional approach proposed in the Italian guidelines for seismic classification, and rigorous probabilistic seismic performance assessment presented in FEMA-P85 are made for a number of case-studies. Results show that the proposed method performs better than the conventional approach and is aligned with the rigorous method, with errors less than 20%. Finally, preliminary considerations on how to incorporate indirect losses are made.
- Open Access
- 20 April 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (8) , 2844
Evaluating Collapse Fragility Curves for Existing Buildings Retrofitted Using Seismic Isolation
Few studies have investigated so far the collapse capacity of buildings with base-isolation. In such studies, preliminary considerations have been drawn based on a number of assumptions regarding: (i) the methodology used for assessing the collapse capacity, (ii) the collapse conditions and failure modes assumed for both superstructure and isolation system, and (iii) the numerical modeling assumptions. The main results pointed out that the collapse conditions of base-isolated buildings may occur for intensity levels slightly higher than those associated with the design earthquake. In this paper, further developments are made through the use of enhanced models for the description of the behavior of a rubber-based isolation system and the assumption of more rational collapse conditions. Collapse fragility functions, in terms of mean and dispersion values, are proposed for two archetypes representative of existing buildings retrofitted using the seismic isolation technique. The collapse margin ratio (median collapse capacity Sa,C, namely the spectral acceleration associated to a probability of exceedance equal to 50%, divided by the design spectral acceleration at the collapse prevention limit state) has been evaluated for each examined case-study. Values ranging from 1.10 to 1.45 were found.
- 20 April 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (8) , 2844
Open AccessEvaluating Collapse Fragility Curves for Existing Buildings Retrofitted Using Seismic Isolation
Few studies have investigated so far the collapse capacity of buildings with base-isolation. In such studies, preliminary considerations have been drawn based on a number of assumptions regarding: (i) the methodology used for assessing the collapse capacity, (ii) the collapse conditions and failure modes assumed for both superstructure and isolation system, and (iii) the numerical modeling assumptions. The main results pointed out that the collapse conditions of base-isolated buildings may occur for intensity levels slightly higher than those associated with the design earthquake. In this paper, further developments are made through the use of enhanced models for the description of the behavior of a rubber-based isolation system and the assumption of more rational collapse conditions. Collapse fragility functions, in terms of mean and dispersion values, are proposed for two archetypes representative of existing buildings retrofitted using the seismic isolation technique. The collapse margin ratio (median collapse capacity Sa,C, namely the spectral acceleration associated to a probability of exceedance equal to 50%, divided by the design spectral acceleration at the collapse prevention limit state) has been evaluated for each examined case-study. Values ranging from 1.10 to 1.45 were found.
- 19 September 2019
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 26 (1) , 1-32
Developing a Direct Approach for Estimating Expected Annual Losses of Italian Buildings
A new approach, referred to as the DEAL (Direct estimation of Expected Annual Losses) method, is developed to evaluate the Expected Annual Loss (EAL) of RC buildings using results of traditional structural analyses within a closed-form expression. The DEAL method is developed here to account for buildings that may be irregular in height or have differing occupancy types along their height. By comparing loss estimates for case study buildings with a rigorous application of the FEMA P58 framework, it is shown that the DEAL method performs better than the PAM approach recently proposed in Italy for seismic risk classification.
- 19 September 2019
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 26 (1) , 1-32
Developing a Direct Approach for Estimating Expected Annual Losses of Italian Buildings
A new approach, referred to as the DEAL (Direct estimation of Expected Annual Losses) method, is developed to evaluate the Expected Annual Loss (EAL) of RC buildings using results of traditional structural analyses within a closed-form expression. The DEAL method is developed here to account for buildings that may be irregular in height or have differing occupancy types along their height. By comparing loss estimates for case study buildings with a rigorous application of the FEMA P58 framework, it is shown that the DEAL method performs better than the PAM approach recently proposed in Italy for seismic risk classification.
- 21 October 2018
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 48 (1) , 78-102
Developing collapse fragility curves for base‐isolated buildings
Summary: Seismic isolation technique is increasingly used both for the design of new buildings and for the seismic retrofit of existing buildings. Nevertheless, so far, little attention has been paid on the collapse capacity of these structures, mainly because it requires refined nonlinear models and careful consideration of different sources of uncertainties.To fill this gap, a set of collapse fragility functions for existing reinforced concrete‐frame buildings, designed for gravity loads only and then retrofitted with different isolation systems (including rubber‐based and friction‐based isolation systems), are derived in this study. For completeness, buildings with low and high seismic resistance are also considered.Collapse fragility functions are derived through incremental dynamic analysis, considering different collapse conditions both for isolation system and superstructure. For each case study building, mean and dispersion values are obtained considering both aleatory and epistemic uncertainties, due to record‐to record and model variability, respectively. Finally, some comments on the possible use of the results of this study for practical applications are made.
- 21 October 2018
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 48 (1) , 78-102
Developing collapse fragility curves for base‐isolated buildings
Summary: Seismic isolation technique is increasingly used both for the design of new buildings and for the seismic retrofit of existing buildings. Nevertheless, so far, little attention has been paid on the collapse capacity of these structures, mainly because it requires refined nonlinear models and careful consideration of different sources of uncertainties.To fill this gap, a set of collapse fragility functions for existing reinforced concrete‐frame buildings, designed for gravity loads only and then retrofitted with different isolation systems (including rubber‐based and friction‐based isolation systems), are derived in this study. For completeness, buildings with low and high seismic resistance are also considered.Collapse fragility functions are derived through incremental dynamic analysis, considering different collapse conditions both for isolation system and superstructure. For each case study building, mean and dispersion values are obtained considering both aleatory and epistemic uncertainties, due to record‐to record and model variability, respectively. Finally, some comments on the possible use of the results of this study for practical applications are made.
- 11 September 2017
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 23 (2) , 208-241
Cost-Benefit Analysis of Alternative Retrofit Strategies for RC Frame Buildings
Monetary losses induced by earthquakes in Reinforced Concrete (RC) buildings are mainly due to damage to non-structural elements (infills, partitions, finishes, etc.). In this study, alternative retrofit strategies for reducing monetary losses in RC frame buildings are examined. They include local strengthening of infills (and partitions) and seismic isolation. The Expected Annual Loss (EAL) of a number of RC frame buildings, pre- and post-rehabilitation, is evaluated, following the time-based assessment approach proposed in the FEMA P-58 guidelines. The breakeven time of each retrofit intervention is then computed, considering the initial cost of the intervention and the expected benefit in terms of EAL reduction.
- 11 September 2017
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 23 (2) , 208-241
Cost-Benefit Analysis of Alternative Retrofit Strategies for RC Frame Buildings
Monetary losses induced by earthquakes in Reinforced Concrete (RC) buildings are mainly due to damage to non-structural elements (infills, partitions, finishes, etc.). In this study, alternative retrofit strategies for reducing monetary losses in RC frame buildings are examined. They include local strengthening of infills (and partitions) and seismic isolation. The Expected Annual Loss (EAL) of a number of RC frame buildings, pre- and post-rehabilitation, is evaluated, following the time-based assessment approach proposed in the FEMA P-58 guidelines. The breakeven time of each retrofit intervention is then computed, considering the initial cost of the intervention and the expected benefit in terms of EAL reduction.
- 3 April 2017
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 46 (12) , 2009-2032
Simplified estimation of the expected annual loss of reinforced concrete buildings
Summary: Performance‐based earthquake engineering procedures have now developed to the point that it is possible to evaluate a range of possible decision variables, including the expected annual monetary loss (EAL). Quantification of the EAL is considered to be particularly useful because it could assist with the identification of effective design and retrofit measures that consider seismic performance over a range of intensity levels. Recognizing, however, that existing procedures for the evaluation of EAL tends to be quite time consuming, this paper builds on a recent proposal to use simplified limit state loss versus intensity relationships to compute EAL via a closed‐form equation, without the need to compile an inventory of damageable components and with freedom in the choice of structural analysis method. Various developments to the simplified approach are made in this paper to allow consideration of loss thresholds, non‐uniform damage distributions and the impact of differences in seismic performance in orthogonal directions. In addition, means of accounting for uncertainties in the simplified EAL assessment are described. The work has focused on the assessment of EAL for reinforced concrete frame buildings with details representative of construction practice adopted in Italy in the 1950s through to the early 1970s. By comparing loss assessment results obtained using a refined methodology with those obtained using the new guidelines developed here for two case study buildings, it is concluded that the simplified approach works well. Future research should therefore aim to further validate the approach and extend it to other building typologies and construction eras. Copyright © 2017 John Wiley & Sons, Ltd.
- 3 April 2017
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 46 (12) , 2009-2032
Simplified estimation of the expected annual loss of reinforced concrete buildings
Summary: Performance‐based earthquake engineering procedures have now developed to the point that it is possible to evaluate a range of possible decision variables, including the expected annual monetary loss (EAL). Quantification of the EAL is considered to be particularly useful because it could assist with the identification of effective design and retrofit measures that consider seismic performance over a range of intensity levels. Recognizing, however, that existing procedures for the evaluation of EAL tends to be quite time consuming, this paper builds on a recent proposal to use simplified limit state loss versus intensity relationships to compute EAL via a closed‐form equation, without the need to compile an inventory of damageable components and with freedom in the choice of structural analysis method. Various developments to the simplified approach are made in this paper to allow consideration of loss thresholds, non‐uniform damage distributions and the impact of differences in seismic performance in orthogonal directions. In addition, means of accounting for uncertainties in the simplified EAL assessment are described. The work has focused on the assessment of EAL for reinforced concrete frame buildings with details representative of construction practice adopted in Italy in the 1950s through to the early 1970s. By comparing loss assessment results obtained using a refined methodology with those obtained using the new guidelines developed here for two case study buildings, it is concluded that the simplified approach works well. Future research should therefore aim to further validate the approach and extend it to other building typologies and construction eras. Copyright © 2017 John Wiley & Sons, Ltd.
- 22 September 2016
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 21 (1) , 23-61
Damage and Loss Assessment of Pre-70 RC Frame Buildings with FEMA P-58
Past earthquakes have shown that seismic events may incur large economic losses in buildings. FEMA P-58 provides engineers a practical tool for the performance seismic assessment of buildings. In this article, FEMA P-58 is applied to a typical Italian pre-1970 reinforced concrete frame building, characterized by plain rebars as steel reinforcement and masonry infills and partitions. Given that suitable tools for these buildings are missing in FEMA P-58, in the first part of the article, specific fragility curves and loss functions for the main structural and non-structural components of the building type under consideration are proposed. In the second part, building performance is evaluated following a time-based assessment approach. Expected economic losses in form of repair costs are then derived. Finally, results are compared with those from past applications to old RC frame buildings.
- 22 September 2016
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 21 (1) , 23-61
Damage and Loss Assessment of Pre-70 RC Frame Buildings with FEMA P-58
Past earthquakes have shown that seismic events may incur large economic losses in buildings. FEMA P-58 provides engineers a practical tool for the performance seismic assessment of buildings. In this article, FEMA P-58 is applied to a typical Italian pre-1970 reinforced concrete frame building, characterized by plain rebars as steel reinforcement and masonry infills and partitions. Given that suitable tools for these buildings are missing in FEMA P-58, in the first part of the article, specific fragility curves and loss functions for the main structural and non-structural components of the building type under consideration are proposed. In the second part, building performance is evaluated following a time-based assessment approach. Expected economic losses in form of repair costs are then derived. Finally, results are compared with those from past applications to old RC frame buildings.
- 3 December 2015
- Published by American Society of Civil Engineers (ASCE)
- p. 363-375
Damage and Loss Assessment of Pre-70 RC Frame Buildings with FEMA P-58: A Case Study
Past earthquakes have shown that seismic events may incur large economic losses in buildings. FEMA P-58 provides engineers, a practical tool for the performance seismic assessment of buildings. In this study, FEMA P-58 is applied to a typical Italian pre-1970 reinforced concrete frame building, characterized by plain rebars as steel reinforcement and masonry infills and partitions. Given that suitable tools for these buildings are missing in FEMA P-58, specific fragility curves and loss functions are first developed. Next, building performance is evaluated following a time-based assessment approach. Finally, the expected annual loss of the selected building is derived and compared with results from past PEER-PBEE applications to old RC frame buildings representative of the U.S. building stock.
- 3 December 2015
- Published by American Society of Civil Engineers (ASCE)
- p. 363-375
Damage and Loss Assessment of Pre-70 RC Frame Buildings with FEMA P-58: A Case Study
Past earthquakes have shown that seismic events may incur large economic losses in buildings. FEMA P-58 provides engineers, a practical tool for the performance seismic assessment of buildings. In this study, FEMA P-58 is applied to a typical Italian pre-1970 reinforced concrete frame building, characterized by plain rebars as steel reinforcement and masonry infills and partitions. Given that suitable tools for these buildings are missing in FEMA P-58, specific fragility curves and loss functions are first developed. Next, building performance is evaluated following a time-based assessment approach. Finally, the expected annual loss of the selected building is derived and compared with results from past PEER-PBEE applications to old RC frame buildings representative of the U.S. building stock.
- 25 July 2015
- Published by Techno-Press in Earthquakes and Structures
- Vol. 9 (1) , 257-279
Developing fragility curves and loss functions for masonry infill walls
- 25 July 2015
- Published by Techno-Press in Earthquakes and Structures
- Vol. 9 (1) , 257-279
Developing fragility curves and loss functions for masonry infill walls