XHXuelian He

Xuelian He

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xuelian He has a total of 128 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of Borate Co‐Catalyst on Ethylene‐Propylene Binary/Ternary Copoly‐Merization with Bisindenyl Zirconocene

    by Qi Chen, Yun Sun, Xuelian He

    Background: The choice of co‐catalyst significantly impacts metallocene catalyzed ethylene propylene copolymerization. This study compares methylaluminoxane (MAO) and borate/TIBA systems for efficiency and comonomer incorporation.Objective: Copolymerizations were catalyzed by Me2Si(Ind)2ZrCl2 activated with MAO (Al/Zr = 2500) or borate/TIBA (B/Zr = 1.5). Activities were measured at varying E/P ratios (4/6 to 8/2) and 5‐ethylidene‐2‐norbornene (ENB) concentrations.Results: The MAO system achieved peak activity (6.89 × 106 g·mol−1·h−1) at E/P = 4/6, while borate/TIBA reached 6.76 × 106 g·mol−1·h−1 (E/P = 8/2). Terpolymerization with ENB showed 180% higher incorporation (6.97%) using borate, with equivalent activity (2.87 × 106 g·mol−1·h−1) and molecular weight to MAO.Conclusion: Borate/TIBA reduces co‐catalyst loading (B/Zr = 1.5 vs. Al/Zr = 2500) while maintaining performance, offering a cost‐effective alternative for industrial EPM/EPDM production.


  • Enhanced Mechanical Properties of Poly(dicyclopentadiene) Composites via Norbornene‐Functionalized Silica Nanomaterials

    by Feng Gao, Xian Wang, Han Shu, Xuelian He

    Functionalizing inorganic fillers and strengthening their interfacial interactions with polymers is a highly effective strategy for improving the mechanical properties of polymer composites. We synthesize nano‐silica using an improved sol–gel method and selected 5‐(triethoxysilyl)‐2‐norbornene grafted silica to obtain NB‐modified SiO2 nanoparticles, which are uniformly dispersed in dicyclopentadiene with an average particle size of 80.4 ± 1.0 nm and a narrow particle size distribution. The NB‐SiO2/PDCPD composite is synthesized via in situ polymerization under the catalysis of the Grubbs second‐generation catalyst. At an NB‐SiO2 loading of 8 wt%, the composite exhibited a glass transition temperature of 141.2°C, representing a 19.9°C increase compared to pure PDCPD. Additionally, the crosslink density reaches 3.933 × 103 mol m−3, reflecting an increment of about 367% compared to pure PDCPD. The enhancement in rigidity resulting from the modification of PDCPD by NB‐SiO2 increases the tensile moduli. At an NB‐SiO2 loading of 8 wt%, the tensile modulus increases by 18.3% to 2029 MPa.


  • Synthesis of Isotactic Polypropylene‐Based Block Copolymers via Bridged Metallocene Catalytic System

    by Qingyun Chu, Yun Sun, Yuanlong Yu, Xuelian He

    To address the inherent limitations in impact resistance of isotactic polypropylene, strategic incorporation of ethylene monomers into polypropylene chains is implemented as an effective toughening modification strategy. In this study, the Me2Si(2‐Me‐4‐PhInd)2ZrCl2/(Ph3C)B(C6F5)4 catalytic system is employed for ethylene‐propylene copolymerization, with particular emphasis on elucidating the influence of alkyl‐aluminum species on propylene homo‐polymerization kinetics. Systematic evaluation of four distinct alkyl‐aluminum compounds as cocatalyst reveals that tri‐isobutyl‐aluminum demonstrates optimal performance, achieving both the maximum polymerization activity (44.16 × 106 g mol−1 h−1). Ethylene‐propylene block copolymers are synthesized via a sequential two‐stage polymerization approach, copolymers exhibiting both distinctive thermal characteristics and superior macroscopic performance. Prolonged ethylene–propylene copolymerization duration induces notable structural evolutions in the block copolymers, proportion of flexible random copolymer segments increases, and weight‐average molecular weight reduces from 21.15 × 106 to 10.83 × 106 g mol−1 accompanied by narrowed polydispersity (Đ from 5.18 to 4.02). Comparative studies with MAO‐activated systems further reveal that the current catalytic system produced block copolymers with enhanced molecular weights (Mw = 34.11 × 104 g mol−1), tighter molecular weight distributions (Đ = 2.46), and elevated propylene content.


  • Molecular dynamics simulation of crystallization and stretching mechanisms in ethylene/1-octene block copolymers: insights into the role of the block structure

    by Yangyang Zhao, Yiran Cao, Fan Zhang, Xuelian He

    MD simulation study of stress–strain behavior and stretching mechanisms in OBCs with varying soft block content and 1-octene insertion rates.


  • Effect of macromolecular sodium polyacrylate on the molecular structure and properties of polyvinyl butyral synthesized deep eutectic solvent

    by Xiaolu Lv, Yumeng Zhang, Fengtao Li, Xuelian He

    Sodium polyacrylate (PAAS), a macromolecule surfactant, was employed in the synthesis of polyvinyl butyral (PVB) using a deep eutectic solvent (DES) as the catalyst. Contrasting with traditional low molecular weight surfactants, scanning electron microscopy (SEM) analysis has confirmed that PAAS enhanced the uniformity of PVB granules while minimizing PAAS residuals, facilitating the production of films with superior transparency and resistance to yellowing. Investigations into the effects of varying molecular weights, dosages of PAAS, and aging times on the properties of PVB revealed that an increase in PAAS molecular weight correspondingly raised the acetal degree (AD) of PVB without affecting the molecular weight of PVB itself. Furthermore, yhe dosage of PAAS significantly impacted the properties of PVB, whereas aging time exhibits minimal influence on the AD of PVB. 1H‐NMR analysis indicated that the structural stability of PVB is due to the dominance of meso acetal isomers, which improved its mechanical properties when synthesized with PAAS3 (molecular weight 60,000 g/mol), containing 91.5% hexamethylene cycloacetal. Notably, compared to PVB synthesized using sodium dodecyl sulphate (SDS), PVB synthesized with PAAS3 exhibits superior mechanical properties, with significantly improved tensile strength and elongation. This phenomenon is further elucidated by SEM images. A comparison between the optimized self‐made PVB and commercial PVB shows that the self‐made PVB performs better, highlighting the critical role of macromolecular PAAS in enhancing the structure and mechanical properties of PVB.


  • Evolution of the cavity structure of HDPE/UHMWPE blends during cold stretching

    by Sun Yun, Xuefeng Pan, Feng Zhang, Xuelian He

    The cavitation process of high‐performance HDPE/UHMWPE blends with a uniform dispersion of UHMWPE during cold stretching was investigated. It was observed that incorporating a small amount of UHMWPE into the HDPE matrix resin can serve as a nucleating agent, increasing the number of contact sites and accelerating the crystallization rate. This leads to the formation of thicker lamellar crystals and tethered molecules, ultimately enhancing the mechanical properties of the HDPE matrix. Furthermore, the relationship between the natural tensile ratio and strain‐hardening modulus was confirmed. Microstructural changes within the blends were also explored. As the drawing tangles in the middle, the cavities subsequently evolve by collapsing and merging to align parallel to the tensile direction, culminating in tensile damage forming a large crack in the final macroscopic form. As a result, the presence of more tethered molecules in the later stages of stretching inhibits further cavity growth.Highlights: The HDPE/UHMWPE blends were prepared by solution blending and ultrasound‐assisted twin‐screw extrusion. The mechanisms underlying the formation and evolution of cavities in HDPE/UHMWPE blends, which lead to stress whitening during tensile damage, were examined by using DSC and SAXS/WAXD. The relationship between microstructure and mechanical properties was analyzed by cold‐drawing the molded blended sheets at room temperature.


  • Dynamics and Internal Structure Evolution during the Glass Transition of the Ethylene–Cyclic Olefin Copolymers: A Molecular Dynamics Simulation

    by Fan Zhang, Wenhui Wang, Yangyang Zhao, Xuelian He

    Amorphous ethylene-cyclic olefin copolymers (COCs) which can be used in cell phone lenses and prefilled syringes have attracted increasing attention due to their excellent and tunable thermal properties. In order to better explain the influence of COC microstructure (cyclic olefin types and content) on the glass transition mechanism, we used molecular dynamics (MD) simulations to track the evolution of free volume, diffusion coefficients, atomic mobility, trans conformation probabilities, and characteristic parameters of α-relaxation kinetics during the quenching process. MD results show that for the classic COC E-co-NB (ethylene-norbornene copolymer), an increase in cyclic olefin content from 25 to 50 mol % reduces atomic mobility, limiting the molecular chain movement at higher temperatures and improving Tg. Compared to NB, the more rigid rings in tricyclopentadiene (TCPD) and exo-1,4,4a,9,9a,10-hexahydro-9,10(1',2')-bridged phenylidene-1,4-bridged methylideneanthracene (HBM) have the following effects: (1) reducing the thermal expansion coefficient and overall chain mobility; (2) enhancing the diffusion energy barrier; (3) promoting the formation of local ordered structures; (4) accelerating α-relaxation dynamics at high temperatures and improving the dynamic fragility m. These lead to an upward shift in the temperature region where chain movement is limited and thus improve Tg and high-temperature dimensional stability. In this simulation, the correlation equation between Tg, m, and the microstructural parameters of COCs is established, which is of great significance for the development of COCs with high performance.


  • Improved interfacial adhesion of carbon fiber‐reinforced polydicyclopentadiene layered composite material by modification of norbornene derivatives

    by Xian Wang, Zehan Zhang, Feng Gao, Xuelian He

    Surface chemical grafting modifications of carbon fibers (CFs) using 5‐(triethoxysilyl)norbornene (TOS), norbornene carboxylic acid tert‐butyl ester (NB‐TBE), and 5‐norbornene‐2,3‐dicarboxylic anhydride (NA) improved interfacial interactions between CFs and poly(dicyclopentadiene) (PDCPD) resin. The ring‐opening metathesis polymerization (ROMP) of DCPD, catalyzed by Grubbs catalyst II, enabled the fabrication of PDCPD/CF layered composite materials with resin and fibers tightly adhered. The optimal composite exhibited remarkable mechanical properties, with a tensile strength of 654.6 MPa and flexural strength of 510.7 MPa. Excellent thermal stability with a maximum weight loss rate in temperatures above 450°C and good chemical resistance with a weight change of about 1% in both acidic and alkaline media highlight the promising potential of these materials for use in harsh environments. The simple yet efficient approach of TOS, NB‐TBE, and NA‐enhanced layered CF shows great promise as advanced composite materials for industrial applications.Highlights: Norbornene derivatives such as TOS, NB‐TBE, and NA are suitable modifiers for CF. ROMP of DCPD and norbornene group onto CFs, fabrication of PDCPD/CF composite materials. The composite exhibited remarkable interfacial adhesion and mechanical properties.


  • Shish‐kebab structure evolution of HDPE/UHMWPE during hot drawing

    by Feng Zhang, Xuefeng Pan, Fengtao Li, Jiajia Xu, Xuelian He

    Using a solution‐mixing method, this research aimed to fabricate high‐density polyethylene (HDPE)/ultra‐high molecular weight polyethylene (UHMWPE) composite materials with uniform dispersion. By incorporating a small quantity of UHMWPE as a nucleating agent, additional contact points were introduced to enhance the crystallization rate of the HDPE matrix. Thermal stretching experiments were conducted on composite systems with varying UHMWPE contents and molecular weight additions at different temperatures. Elevating the stretching temperature was found to decrease the yield strain and yield strength, extend the stage of tensile plastic deformation, and diminish the overall mechanical properties of the composite material. Notably, stretching at temperatures ranging from 90 to 110°C accentuated the development of internal crystal orientation structures. Under low strain conditions, crystal slip was observed to be concentrated, with single crystals undergoing continuous stretching and breaking, resulting in a decrease in the long period. Conversely, at high strains, the induced formation of oriented lamellar structures was observed.Highlights: Prepared HDPE/UHMWPE blends by UHMWPE with varying molecular weights. Analyzed the alterations in the HDPE/UHMWPE blends' internal crystal structure. Influence of UHMWPE addition, temperature on the evolution of crystal structure.


  • Open Access

    Revealing the Effect of the Molecular Weight Distribution on the Chain Diffusion and Crystallization Process under a Branched Trimodal Polyethylene System

    by Min Cai, Xuelian He, Boping Liu

    With the increasing demand for high-end materials, trimodal polyethylene (PE) has become a research hotspot in recent years due to its superior performance compared with bimodal PE. By means of molecular dynamics (MD) simulations, we aim to expound the effect of the molecular weight distribution (MWD) on the mechanism of nucleation and crystallization of trimodal PE. The crystallization rate is faster when short-chain branching is distributed on a single backbone compared to that on two backbones. In addition, as the content of high molecular weight backbone decreases, the time required for nucleation decreases, but the crystallization rate slows down. This is because low molecular weight backbones undergo intra-chain nucleation and crystallize earlier due to the high diffusion capacity, which leads to entanglement that prevents the movement of medium or high molecular weight backbones. Furthermore, crystallized short backbones hinder the movement and crystallization of other backbones. What is more, a small increase in the high molecular weight branched backbone of trimodal PE can make the crystallinity greater than that of bimodal PE, but when the content of high molecular weight backbone is too high, the crystallinity decreases instead, because the contribution of short and medium backbones to high crystallinity is greater than that of long backbones.