ESElia Strambini

Elia Strambini

*This is an algorithmically generated author record based on publicly available information.

Elia Strambini has a total of 168 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Graphene Josephson diodes from asymmetric disorder

    by Ivan Villani, Luca Chirolli, Matteo Carrega, Alessandro Crippa, Elia Strambini, Francesco Giazotto, Vaidotas Mišeikis, Camilla Coletti, Fabio Beltram, Kenji Watanabe, et al.

    Josephson diodes are non-reciprocal superconducting devices characterized by different switching currents depending on the current flow direction. They recently attracted considerable theoretical and experimental attention, in view of their possible application as rectifying elements in the field of superconducting electronics, and as probes to investigate symmetry breaking mechanisms in mesoscopic systems. In this work, we show that graphene Josephson junctions provide rectification of supercurrent with an efficiency exceeding 20 % . The effect appears applying a mT out-of-plane magnetic field and is enhanced close to the nodes of the Fraunhofer interference pattern. Our findings are consistent with a theoretical model that considers long-range scattering potentials in the junction as the symmetry-breaking mechanism, which yields supercurrent rectification in highly transparent junctions. While graphene stands out as an ultra-clean transmission medium, our work shows that unavoidable residual disorder is sufficient to promote this effect.


  • Open Access

    Nonreciprocal Transport in Superconducting Diodes via Tailored Antidot Geometries

    by Eloi Benicio de Melo Junior, Elia Strambini, Francesco Giazotto, Clodoaldo I. L. de Araujo

    The superconducting diode effect (SDE) offers a transformative path toward dissipationless nonreciprocal electronics, yet a unified framework for controlling its microscopic origins remains elusive. Here, we demonstrate precision engineering of the SDE in niobium films by tailoring the geometry of asymmetric micrometer-sized antidots. By decoupling transport responses under in-plane and out-of-plane magnetic fields, we identify a dual-mechanism regime: low-field rectification is governed by surface-barrier asymmetry (edge flux pinning), while high-field performance is driven by the intrinsic geometric landscape of the antidots (bulk flux pinning). Supported by time-dependent Ginzburg–Landau (TDGL) simulations and a robust analytical model, we establish a predictive design principle that links pinning topology to diode efficiency. These results provide a scalable strategy for developing tunable superconducting rectifiers, offering a critical building block for next-generation cryogenic logic and quantum information processing.

  • Open Access

    Supercurrent time division multiplexing with solid-state integrated hybrid superconducting electronics

    by Alessandro Paghi, Laura Borgongino, Simone Tortorella, Giorgio De Simoni, Elia Strambini, Lucia Sorba, Francesco Giazotto

    Time-division multiplexing of cryogenic signals is a promising approach to reduce space requirements, shorten cooldown times, and increase the number of quantum devices measured per cooldown. We demonstrate time-division multiplexing of non-dissipative supercurrents using voltage-controlled hybrid superconducting demultiplexers. These chips integrate superconducting Josephson Field Effect Transistors including Al superconducting electrodes, proximitized semiconducting InAs channels, and hafnium oxide gate insulators. Each transistor fully suppresses the switching current and increases the resistance 20 times under a gate voltage of −4.5 V. A demultiplexer with one input and eight outputs showed a non-dissipative input range of ±2 μA, operating up to 100 MHz in signal frequency, and 100 kHz in switching frequency at 50 mK. It achieved near-zero insertion loss in the superconducting state and an \(\frac{{ON}}{{OFF}}\) ratio of 17.5 dB. By optimizing the signal layout, the operation was extended up to 4 GHz using a demultiplexer with two outputs.


  • Open Access

    Biharmonic-Drive Tunable Josephson Diode

    by Laura Borgongino, Rubén Seoane Souto, Alessandro Paghi, Giulio Senesi, Katarzyna Skibinska, Lucia Sorba, Elisa Riccardi, Francesco Giazotto, Elia Strambini

    The superconducting diode effect has garnered significant interest due to its prospective applications in cryogenic electronics and computing, enabling directional supercurrent transport. This phenomenon has been demonstrated across various superconducting platforms, which typically necessitate unconventional materials with broken spatial symmetries or external magnetic fields, posing scalability and integration challenges. This work introduces an innovative method to realize the superconducting diode effect by disrupting spatiotemporal symmetries in a conventional Josephson junction utilizing a biharmonic alternating-current (AC) drive signal. We achieve wireless modulation of the diode's polarity and efficiency with an antenna. Our findings indicate a diode efficiency reaching the ideal 100% over a broad frequency range, with a temperature resilience of up to 800 mK, and efficient AC signal rectification. This versatile and platform-independent superconducting diode signifies a promising component for advancing future superconducting digital electronics, including efficient logic gates, ultrafast switches, and dynamic half-wave supercurrent rectifiers.


  • Open Access

    Double loop dc-SQUID as a tunable Josephson diode

    by A. Greco, Q. Pichard, E. Strambini, F. Giazotto

    The development of superconducting electronics requires careful characterization of the components that makeup electronic circuits. Superconducting weak links are the building blocks of most superconducting electronic components and are characterized by highly nonlinear current-to-phase relations (CPRs), which are often not perfectly known. Recent research has found that the Josephson diode effect (JDE) can be related to the high harmonic content of the current-to-phase relation of the weak links embedded in superconducting interferometers. This makes the JDE a natural tool for exploring the harmonic content of weak links beyond single-harmonic CPR. In this study, we present the theoretical model and experimental characterization of a double-loop superconducting quantum interference device (DL-SQUID) that embeds all-metallic superconductor-normal metal-superconductor junctions. The proposed device exhibits the JDE due to the interference of the supercurrents of three weak links in parallel, and this feature can be adjusted through two magnetic fluxes, which act as experimental knobs. We carry out a theoretical study of the device in terms of the relative weight of the interferometer arms and the experimental characterization concerning flux tunability and temperature.


  • Open Access

    Superconducting spintronic heat engine

    by Clodoaldo Irineu Levartoski de Araujo, Pauli Virtanen, Maria Spies, Carmen González-Orellana, Samuel Kerschbaumer, Maxim Ilyn, Celia Rogero, Tero Tapio Heikkilä, Francesco Giazotto, Elia Strambini

    Heat engines are key devices that convert thermal energy into usable energy. Strong thermoelectricity, at the basis of electrical heat engines, is present in superconducting spin tunnel barriers at cryogenic temperatures where conventional semiconducting or metallic technologies cease to work. Here we realize a superconducting spintronic heat engine consisting of a ferromagnetic insulator/superconductor/insulator/ferromagnet tunnel junction (EuS/Al/AlOx/Co). The efficiency of the engine is quantified for bath temperatures ranging from 25 mK up to 800 mK, and at different load resistances. Moreover, we show that the sign of the generated thermoelectric voltage can be inverted according to the parallel or anti-parallel orientation of the two ferromagnetic layers, EuS and Co. This realizes a thermoelectric spin valve controlling the sign and strength of the Seebeck coefficient, thereby implementing a thermoelectric memory cell. We propose a theoretical model that allows describing the experimental data and predicts the engine efficiency for different device parameters.


  • Open Access

    Sign reversal diode effect in superconducting Dayem nanobridges

    by Daniel Margineda, Alessandro Crippa, Elia Strambini, Yuri Fukaya, Maria Teresa Mercaldo, Mario Cuoco, Francesco Giazotto

    Supercurrent diodes are nonreciprocal electronic elements whose switching current depends on their flow direction. Recently, a variety of composite systems combining different materials and engineered asymmetric superconducting devices have been proposed. Yet, ease of fabrication and tunable sign of supercurrent rectification joined to large efficiency have not been assessed in a single platform so far. We demonstrate that all-metallic superconducting Dayem nanobridges naturally exhibit nonreciprocal supercurrents under an external magnetic field, with a rectification efficiency up to ~ 27%. Our niobium nanostructures are tailored so that the diode polarity can be tuned by varying the amplitude of an out-of-plane magnetic field or the temperature in a regime without magnetic screening. We show that sign reversal of the diode effect may arise from the high-harmonic content of the current phase relation in combination with vortex phase windings present in the bridge or an anomalous phase shift compatible with anisotropic spin-orbit interactions.


  • Open Access

    Superconducting spintronic tunnel diode

    by E. Strambini, M. Spies, N. Ligato, S. Ilic, M. Rouco, C. G. Orellana, M. Ilyn, C. Rogero, F. S. Bergeret, J. S. Moodera, et al.

    Diodes are key elements for electronics, optics, and detection. The search for a material combination providing the best performances for the required application is continuously ongoing. Here, we present a superconducting spintronic tunnel diode based on the strong spin filtering and splitting generated by an EuS thin film between a superconducting Al and a normal metal Cu layer. The Cu/EuS/Al tunnel junction achieves a large rectification (up to $\sim40$\%) already for a small voltage bias ($\sim 200$ $\mu$V) thanks to the small energy scale of the system: the Al superconducting gap. With the help of an analytical theoretical model we can link the maximum rectification to the spin polarization of the barrier and describe the quasi-ideal Schottky-diode behavior of the junction. This cryogenic spintronic rectifier is promising for the application in highly-sensitive radiation detection for which two different configurations are evaluated. In addition, the superconducting diode may pave the way for future low-dissipation and fast superconducting electronics.


  • Open Access

    Superconducting Spintronic Heat Engine

    by Clodoaldo I. L. de Araujo, Pauli Virtanen, Maria Spies, Carmen González-Orellana, Samuel Kerschbaumer, Maxim Ilyn, Celia Rogero, Tero T. Heikkilä, Francesco Giazotto, E. Strambini

    Heat engines are key devices that convert thermal energy into usable energy. Strong thermoelectricity, at the basis of electrical heat engines, is present in superconducting spin tunnel barriers at cryogenic temperatures where conventional semiconducting or metallic technologies cease to work. Here we realize a superconducting spintronic heat engine consisting of a ferromagnetic insulator/superconductor/insulator/ferromagnet tunnel junction (EuS/Al/AlO$_x$/Co). The efficiency of the engine is quantified for bath temperatures ranging from 25 mK up to 800 mK, and at different load resistances. Moreover, we show that the sign of the generated thermoelectric voltage can be inverted according to the parallel or anti-parallel orientation of the two ferromagnetic layers, EuS and Co. This realizes a thermoelectric spin valve controlling the sign and strength of the Seebeck coefficient, thereby implementing a thermoelectric memory cell. We propose a theoretical model that allows describing the experimental data and predicts the engine efficiency for different device parameters.

  • Open Access

    Superconductor-ferromagnet hybrids for non-reciprocal electronics and detectors

    by Zhuoran Geng, Alberto Hijano, Stefan Ilić, Maxim Ilyn, Ilari Maasilta, Alessandro Monfardini, Maria Spies, Elia Strambini, Pauli Virtanen, Martino Calvo, et al.

    We review the use of hybrid thin films composed of superconductors and ferromagnets for creating non-reciprocal electronic components and self-biased detectors of electromagnetic radiation. We begin by introducing the theory behind these effects, as well as discussing various potential materials that can be used in the fabrication of these components. We then proceed with a detailed discussion on the fabrication and characterization of Al/EuS/Cu and EuS/Al/Co-based detectors, along with their noise analysis. Additionally, we suggest some approaches for multiplexing such self-biased detectors.