Wei Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Wei Gao has a total of 85 co-authors. Here are the top co-authors by number of shared publications:
Guanben Du
Yunnan Key Laboratory of Wood Adhesives and Glue Products
22 shared publicationsLong Yang
Yunnan Key Laboratory of Wood Adhesives and Glue Products Southwest Forestry University Kunming Yunnan Province 650224 P. R. China
10 shared publicationsKe Zhan
School of Forestry and Wildlife Science, Auburn University, Duncan Drive, Auburn, Alabama36849, United States
8 shared publicationsLingling Wang
Yunnan Key Laboratory of Wood Adhesives and Glue Products
8 shared publicationsQuanxiong Lu
8 shared publicationsTengfei Yi
National Centre for Timber Durability and Design Life , University of the Sunshine Coast , Sippy Downs , QLD , Australia
8 shared publications
Latest Publications
- 5 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (46) , 63384-63398
Br-Doped CuO NPs@Wood for Photocatalytic Degrading Organic Dyes and VOCs
Developing sustainable and high-performance photocatalysts for environmental remediation remains a significant challenge. Herein, bromine-doped CuO nanoparticles (Br-CuO NPs) were in situ anchored onto hardwood and softwood substrates via a facile hydrothermal approach, yielding robust wood-semiconductor hybrid architectures. The optimized Br-CuO NPs@poplar exhibited outstanding photocatalytic activity, achieving 99.46% degradation of methylene blue (MB) within 10 h, which is 1.23 times higher than that of undoped CuO, and retained over 95% efficiency after 100 consecutive cycles. Furthermore, the photocatalyst efficiently degraded gaseous pollutants, achieving 97.26%, 94.63%, and 87.79% removal of acetone, formaldehyde, and ammonia, respectively, under visible light irradiation. Comprehensive structural and electronic analyses (SEM, EIS, PL) revealed that Br doping introduced oxygen vacancies and shallow donor levels, thereby narrowing the bandgap and promoting charge carrier separation. This in situ doping-anchoring strategy provides a scalable and eco-friendly route to fabricate durable wood-based photocatalysts with superior efficiency for simultaneous air and water purification.
- 5 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (46) , 63384-63398
Br-Doped CuO NPs@Wood for Photocatalytic Degrading Organic Dyes and VOCs
Developing sustainable and high-performance photocatalysts for environmental remediation remains a significant challenge. Herein, bromine-doped CuO nanoparticles (Br-CuO NPs) were in situ anchored onto hardwood and softwood substrates via a facile hydrothermal approach, yielding robust wood-semiconductor hybrid architectures. The optimized Br-CuO NPs@poplar exhibited outstanding photocatalytic activity, achieving 99.46% degradation of methylene blue (MB) within 10 h, which is 1.23 times higher than that of undoped CuO, and retained over 95% efficiency after 100 consecutive cycles. Furthermore, the photocatalyst efficiently degraded gaseous pollutants, achieving 97.26%, 94.63%, and 87.79% removal of acetone, formaldehyde, and ammonia, respectively, under visible light irradiation. Comprehensive structural and electronic analyses (SEM, EIS, PL) revealed that Br doping introduced oxygen vacancies and shallow donor levels, thereby narrowing the bandgap and promoting charge carrier separation. This in situ doping-anchoring strategy provides a scalable and eco-friendly route to fabricate durable wood-based photocatalysts with superior efficiency for simultaneous air and water purification.
Hydrangea and Lotus Inspired In Situ Growth Mechanism of Nano Basic Copper Acetate on Functional Modified Wood
The value‐added functional modification on wood have attracted much more attention because of global consensus on low carbon and carbon reduction. Nano basic copper acetate is in situ synthesized on a wood surface successfully. The morphology of in situ grown nano basic copper acetate varies according to the wood species and cut wood sections. Furthermore, the time‐dependent evolution of in situ synthesized nano basic copper acetate particles on poplar surface is first illuminated in this work. The as prepared nanoparticle simultaneously endows typical hard and soft wood with superhydrophobic function on all three sections, which also endowed desired mechanical and chemical stability, self‐cleaning, and antifouling properties, as well as excellent UV durability and mold resistance. The progress of this work may start a new journey for scientific research on dual regulation between nanoparticles morphology and aimed function.
Hydrangea and Lotus Inspired In Situ Growth Mechanism of Nano Basic Copper Acetate on Functional Modified Wood
The value‐added functional modification on wood have attracted much more attention because of global consensus on low carbon and carbon reduction. Nano basic copper acetate is in situ synthesized on a wood surface successfully. The morphology of in situ grown nano basic copper acetate varies according to the wood species and cut wood sections. Furthermore, the time‐dependent evolution of in situ synthesized nano basic copper acetate particles on poplar surface is first illuminated in this work. The as prepared nanoparticle simultaneously endows typical hard and soft wood with superhydrophobic function on all three sections, which also endowed desired mechanical and chemical stability, self‐cleaning, and antifouling properties, as well as excellent UV durability and mold resistance. The progress of this work may start a new journey for scientific research on dual regulation between nanoparticles morphology and aimed function.
- 30 August 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (5)
In Situ Growth Mechanism of Nano Brochantite on Superhydrophobic Eucalyptus Scrimber
The urgent requirement of carbon reduction in the world provides wood products a historical opportunity to play a crucial role to fix carbon dioxide and reduce carbon emission. It is essential to reveal the in situ growth mechanism of copper nanoparticles on eucalyptus scrimber surface. Cu4(SO4)(OH)6 nanoflowers are in situ synthesized successfully on the surface of eucalyptus scrimber via a simple hydrothermal process in this work. The detailed nucleation and in situ growth process of Cu4(OH)6SO4 nanoparticles on the surface of eucalyptus scrimber, characterized by the trajectory of size evolution, are revealed first in this work. According to the classical nucleation theory, the nucleation stage of as prepared Cu4(SO4)(OH)6 nanoflowers includes nucleus formation and nucleus growth. Although the same initial precursor reactant is obtained at the nucleation stage, there are two types of early nanoparticles, with morphology of fusiform and strip shape being self assembled to nanoflower structure during the growth stage. Further, the modified eucalyptus scrimber exhibits excellent superhydrophobicity, UV durability, mold and moisture resistance, as well as reversible property. Therefore, the proposed in situ growth kinetics related to Cu4(OH)6SO4 nanoparticles on wood surface have potential to be a reference to develop multifunctional superhydrophobic wood‐based material for variable applications.
- 30 August 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (5)
In Situ Growth Mechanism of Nano Brochantite on Superhydrophobic Eucalyptus Scrimber
The urgent requirement of carbon reduction in the world provides wood products a historical opportunity to play a crucial role to fix carbon dioxide and reduce carbon emission. It is essential to reveal the in situ growth mechanism of copper nanoparticles on eucalyptus scrimber surface. Cu4(SO4)(OH)6 nanoflowers are in situ synthesized successfully on the surface of eucalyptus scrimber via a simple hydrothermal process in this work. The detailed nucleation and in situ growth process of Cu4(OH)6SO4 nanoparticles on the surface of eucalyptus scrimber, characterized by the trajectory of size evolution, are revealed first in this work. According to the classical nucleation theory, the nucleation stage of as prepared Cu4(SO4)(OH)6 nanoflowers includes nucleus formation and nucleus growth. Although the same initial precursor reactant is obtained at the nucleation stage, there are two types of early nanoparticles, with morphology of fusiform and strip shape being self assembled to nanoflower structure during the growth stage. Further, the modified eucalyptus scrimber exhibits excellent superhydrophobicity, UV durability, mold and moisture resistance, as well as reversible property. Therefore, the proposed in situ growth kinetics related to Cu4(OH)6SO4 nanoparticles on wood surface have potential to be a reference to develop multifunctional superhydrophobic wood‐based material for variable applications.
- 2 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (6) , 7950-7960
Lobster-Inspired Chitosan-Derived Adhesives with a Biomimetic Design
Polysaccharide-based adhesives, especially chitosan (CS)-derived adhesives, serve as promising sustainable alternatives to traditional adhesives. However, most demonstrate a poor adhesive strength. Inspired by the inherent layered structure of marine arthropods (lobsters), a core-shell structure (SiO2-NH2@OPG) with amine-functionalized silica (SiO2-NH2) as the core and oxidized pyrogallol (OPG) as the shell is prepared in this study. The compound is blended with CS to produce a structural biomimetic wood adhesive (SiO2-NH2@OPG/CS) with excellent performance. In addition to thermocompressive curing, this adhesive exhibits a water-evaporation-induced curing behavior at room temperature. With reference to the design mechanism of the lobster cuticle, this microphase-separated structure consists of clustered nanofibers with varying amounts of SiO2-NH2@OPG particles between the fibers. This intriguing microphase structure and its mechanical effects could offer a powerful solution for improving the functional modification of wood composites.
- 2 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (6) , 7950-7960
Lobster-Inspired Chitosan-Derived Adhesives with a Biomimetic Design
Polysaccharide-based adhesives, especially chitosan (CS)-derived adhesives, serve as promising sustainable alternatives to traditional adhesives. However, most demonstrate a poor adhesive strength. Inspired by the inherent layered structure of marine arthropods (lobsters), a core-shell structure (SiO2-NH2@OPG) with amine-functionalized silica (SiO2-NH2) as the core and oxidized pyrogallol (OPG) as the shell is prepared in this study. The compound is blended with CS to produce a structural biomimetic wood adhesive (SiO2-NH2@OPG/CS) with excellent performance. In addition to thermocompressive curing, this adhesive exhibits a water-evaporation-induced curing behavior at room temperature. With reference to the design mechanism of the lobster cuticle, this microphase-separated structure consists of clustered nanofibers with varying amounts of SiO2-NH2@OPG particles between the fibers. This intriguing microphase structure and its mechanical effects could offer a powerful solution for improving the functional modification of wood composites.
- 19 December 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 480
Optimization of durable superhydrophobic wood with superstrong ultraviolet resistance and chemical stability
- 19 December 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 480
Optimization of durable superhydrophobic wood with superstrong ultraviolet resistance and chemical stability
- 4 December 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 351, 119676
Sustainable, efficient, and synergistic photocatalytic degradation toward organic dyes and formaldehyde gas via Cu2O NPs@wood
- 4 December 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 351, 119676
Sustainable, efficient, and synergistic photocatalytic degradation toward organic dyes and formaldehyde gas via Cu2O NPs@wood
- 3 August 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (32) , 11878-11889
Integration of Aromatic Polyurea and Dialdehyde Cellulose as High-Performance Hybrid Resin Adhesives for Bonding Wood
- 3 August 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (32) , 11878-11889
Integration of Aromatic Polyurea and Dialdehyde Cellulose as High-Performance Hybrid Resin Adhesives for Bonding Wood
- Open Access
Ureido Hyperbranched Polymer Modified Urea-Formaldehyde Resin as High-Performance Particleboard Adhesive
The performance of urea-formaldehyde (UF) resin and its formaldehyde emission is a natural contradiction. High molar ratio UF resin performance is very good, but its formaldehyde release is high; low molar ratio UF resin formaldehyde release is reduced, but the resin itself performance becomes very bad. In order to solve this traditional problem, an excellent strategy of UF resin modified by hyperbranched polyurea is proposed. In this work, hyperbranched polyurea (UPA6N) is first synthesized by a simple method without any solvent. UPA6N is then added into industrial UF resin in different proportions as additives to manufacture particleboard and test its related properties. UF resin with a low molar ratio has a crystalline lamellar structure, and UF-UPA6N resin has an amorphous structure and rough surface. The results show that internal bonding strength increased by 58.5%, modulus of rupture increased by 24.4%, 24 h thickness swelling rate (%) decreased by 54.4%, and formaldehyde emission decreased by 34.6% compared with the unmodified UF particleboard. This may be ascribed to the polycondensation between UF and UPA6N, while UF-UPA6N resin forms more dense three-dimensional network structures. Finally, the application of UF-UPA6N resin adhesives to bond particleboard significantly improves the adhesive strength and water resistance and reduces formaldehyde emission, suggesting that the adhesive can be used as a green and eco-friendly adhesive resource for the wood industry.
Open AccessUreido Hyperbranched Polymer Modified Urea-Formaldehyde Resin as High-Performance Particleboard Adhesive
The performance of urea-formaldehyde (UF) resin and its formaldehyde emission is a natural contradiction. High molar ratio UF resin performance is very good, but its formaldehyde release is high; low molar ratio UF resin formaldehyde release is reduced, but the resin itself performance becomes very bad. In order to solve this traditional problem, an excellent strategy of UF resin modified by hyperbranched polyurea is proposed. In this work, hyperbranched polyurea (UPA6N) is first synthesized by a simple method without any solvent. UPA6N is then added into industrial UF resin in different proportions as additives to manufacture particleboard and test its related properties. UF resin with a low molar ratio has a crystalline lamellar structure, and UF-UPA6N resin has an amorphous structure and rough surface. The results show that internal bonding strength increased by 58.5%, modulus of rupture increased by 24.4%, 24 h thickness swelling rate (%) decreased by 54.4%, and formaldehyde emission decreased by 34.6% compared with the unmodified UF particleboard. This may be ascribed to the polycondensation between UF and UPA6N, while UF-UPA6N resin forms more dense three-dimensional network structures. Finally, the application of UF-UPA6N resin adhesives to bond particleboard significantly improves the adhesive strength and water resistance and reduces formaldehyde emission, suggesting that the adhesive can be used as a green and eco-friendly adhesive resource for the wood industry.
- 29 November 2022
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 10 (49) , 16169-16181
Superhydrophobic Poplar Scrimber Via In Situ Synthesis of Cu7Cl4(OH)10·H2O Heterostructure Inspired by Pine Cone with Superultraviolet Resistance
- 29 November 2022
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 10 (49) , 16169-16181
Superhydrophobic Poplar Scrimber Via In Situ Synthesis of Cu7Cl4(OH)10·H2O Heterostructure Inspired by Pine Cone with Superultraviolet Resistance