Ibadillah A. Digdaya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Ibadillah A. Digdaya has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Wilson A. Smith
University of Colorado Boulder
8 shared publications - Miro Zeman
Delft University of Technology Mekelweg 4 Delft 2628CD The Netherlands
5 shared publications Arno H. M. Smets
Photovoltaic Materials and Devices (PVMD) group, Delft University of Technology. Building 36, Mekelweg 4, 2628CD, Delft, The Netherlands
3 shared publications- Bartek Jacek Trześniewski
Materials for Energy Conversion and Storage (MECS), Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, 2629 HZ Delft, The Netherlands
3 shared publications - Erik Christian Garnett
LMPV-Sustainable Energy Materials Department, AMOLF Institute, Science Park 104, Amsterdam, 1098XG, The Netherlands
3 shared publications - Lihao Han
Joint Center for Artificial Photosynthesis (JCAP), California Institute of Technology (CALTECH), Pasadena, USA
3 shared publications
Latest Publications
- 23 November 2020
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2020-02 (64) , 3262
(Invited) Electrochemical Extraction and Conversion of CO2 from Seawater
Capture and conversion of CO2 from anthropogenic emission is becoming an increasingly important social responsibility as the concentration of atmospheric CO2 continues to rise above record high levels. To achieve carbon negative conditions in the long term, capture and extraction of CO2 directly from air and seawater will likely play a much bigger role. The concentration of the present CO2 in the atmosphere is ~400 ppm, or 0.00079 kg m−3. As a result, a large volume of air needs to be processed in direct air capture processes. In contrast, world ocean constitutes the largest carbon sink, absorbing about 40% of anthropogenic CO2 since the beginning of industrial era with an effective CO2 concentration of 2.1 mmol kg−1, or 0.095 kg m−3 in seawater, which is a factor of 120 times larger than in the atmosphere. Thus, extraction of CO2 from seawater provides an alternative and unique approach in the global carbon removal technological landscape. Herein, a new bipolar membrane electrodialysis (BPMED) cell design, in which the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) at the electrodes were replaced with reversible redox couple reactions with minimal thermodynamic and kinetic voltage losses, was designed, constructed and evaluated. At an operating current density of 3.3 mA cm−2, and a seawater flow rate of 37 ml min−1, a record low electrochemical energy consumption of 155.4 kJ mol−1 or 0.98 kWh kg−1 of CO2 was achieved. The demonstrated BPMED cell also exhibited a high CO2 extraction efficiency of 71% of total dissolved inorganic carbon (DIC). We also demonstrated, for the first time, the direct coupling between the CO2 extraction from seawater via BPMED and electrochemical CO2 reduction (CO2R) into fuels and chemicals. The outlet CO2 stream from the BPMED was fed into tandem custom-built vapor-fed GDE cells to first perform the oxygen reduction reaction (ORR) using a nanoparticle Ag-based catalyst followed by CO2R using Cu or Ag as the electrocatalyst. This configuration allowed us to convert CO2 from seawater to fuels and valuable chemicals such as carbon monoxide, ethylene, ethanol, and propanol with total Faradaic efficiency (FE) of up to 73% at current densities of 58 mA cm−2 using CO2R Cu electrocatalyst and to carbon monoxide with selectivity of up to 95% at current densities of 11.15 mA cm−2 using CO2R Ag electrocatalyst. Figure 1
- 23 November 2020
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2020-02 (64) , 3262
(Invited) Electrochemical Extraction and Conversion of CO2 from Seawater
Capture and conversion of CO2 from anthropogenic emission is becoming an increasingly important social responsibility as the concentration of atmospheric CO2 continues to rise above record high levels. To achieve carbon negative conditions in the long term, capture and extraction of CO2 directly from air and seawater will likely play a much bigger role. The concentration of the present CO2 in the atmosphere is ~400 ppm, or 0.00079 kg m−3. As a result, a large volume of air needs to be processed in direct air capture processes. In contrast, world ocean constitutes the largest carbon sink, absorbing about 40% of anthropogenic CO2 since the beginning of industrial era with an effective CO2 concentration of 2.1 mmol kg−1, or 0.095 kg m−3 in seawater, which is a factor of 120 times larger than in the atmosphere. Thus, extraction of CO2 from seawater provides an alternative and unique approach in the global carbon removal technological landscape. Herein, a new bipolar membrane electrodialysis (BPMED) cell design, in which the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) at the electrodes were replaced with reversible redox couple reactions with minimal thermodynamic and kinetic voltage losses, was designed, constructed and evaluated. At an operating current density of 3.3 mA cm−2, and a seawater flow rate of 37 ml min−1, a record low electrochemical energy consumption of 155.4 kJ mol−1 or 0.98 kWh kg−1 of CO2 was achieved. The demonstrated BPMED cell also exhibited a high CO2 extraction efficiency of 71% of total dissolved inorganic carbon (DIC). We also demonstrated, for the first time, the direct coupling between the CO2 extraction from seawater via BPMED and electrochemical CO2 reduction (CO2R) into fuels and chemicals. The outlet CO2 stream from the BPMED was fed into tandem custom-built vapor-fed GDE cells to first perform the oxygen reduction reaction (ORR) using a nanoparticle Ag-based catalyst followed by CO2R using Cu or Ag as the electrocatalyst. This configuration allowed us to convert CO2 from seawater to fuels and valuable chemicals such as carbon monoxide, ethylene, ethanol, and propanol with total Faradaic efficiency (FE) of up to 73% at current densities of 58 mA cm−2 using CO2R Cu electrocatalyst and to carbon monoxide with selectivity of up to 95% at current densities of 11.15 mA cm−2 using CO2R Ag electrocatalyst. Figure 1
- Top Cited PapersOpen Access
- 4 September 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-10
A direct coupled electrochemical system for capture and conversion of CO2 from oceanwater
Capture and conversion of CO2 from oceanwater can lead to net-negative emissions and can provide carbon source for synthetic fuels and chemical feedstocks at the gigaton per year scale. Here, we report a direct coupled, proof-of-concept electrochemical system that uses a bipolar membrane electrodialysis (BPMED) cell and a vapor-fed CO2 reduction (CO2R) cell to capture and convert CO2 from oceanwater. The BPMED cell replaces the commonly used water-splitting reaction with one-electron, reversible redox couples at the electrodes and demonstrates the ability to capture CO2 at an electrochemical energy consumption of 155.4 kJ mol−1 or 0.98 kWh kg−1 of CO2 and a CO2 capture efficiency of 71%. The direct coupled, vapor-fed CO2R cell yields a total Faradaic efficiency of up to 95% for electrochemical CO2 reduction to CO. The proof-of-concept system provides a unique technological pathway for CO2 capture and conversion from oceanwater with only electrochemical processes.
- 4 September 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-10
Top Cited PapersOpen AccessA direct coupled electrochemical system for capture and conversion of CO2 from oceanwater
Capture and conversion of CO2 from oceanwater can lead to net-negative emissions and can provide carbon source for synthetic fuels and chemical feedstocks at the gigaton per year scale. Here, we report a direct coupled, proof-of-concept electrochemical system that uses a bipolar membrane electrodialysis (BPMED) cell and a vapor-fed CO2 reduction (CO2R) cell to capture and convert CO2 from oceanwater. The BPMED cell replaces the commonly used water-splitting reaction with one-electron, reversible redox couples at the electrodes and demonstrates the ability to capture CO2 at an electrochemical energy consumption of 155.4 kJ mol−1 or 0.98 kWh kg−1 of CO2 and a CO2 capture efficiency of 71%. The direct coupled, vapor-fed CO2R cell yields a total Faradaic efficiency of up to 95% for electrochemical CO2 reduction to CO. The proof-of-concept system provides a unique technological pathway for CO2 capture and conversion from oceanwater with only electrochemical processes.
- Open Access
- 7 February 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (10) , 5462-5471
General Considerations for Improving Photovoltage in Metal–Insulator–Semiconductor Photoanodes
Metal–insulator–semiconductor (MIS) photoelectrodes offer a simple alternative to the traditional semiconductor–liquid junction and the conventional p–n junction electrode. Highly efficient MIS photoanodes require interfacial surface passivating oxides and high workfunction metals to produce a high photovoltage. Herein, we investigate and analyze the effect of interfacial oxides and metal workfunctions on the barrier height and the photovoltage of a c-Si photoanode. We use two metal components in a bimetal contact configuration and observe the modulation of the effective barrier height and the resulting photovoltage as a function of the secondary outer metal. The photovoltage shows a strong linear dependence by increasing the inner metal workfunction, with the highest photovoltage achieved by a MIS photoanode using a platinum inner metal. We also found that coupling a thin aluminium oxide with an interfacial silicon oxide and controlling the oxide thickness can significantly improve the photovoltage of an MIS junction photoanode.
- 7 February 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (10) , 5462-5471
Open AccessGeneral Considerations for Improving Photovoltage in Metal–Insulator–Semiconductor Photoanodes
Metal–insulator–semiconductor (MIS) photoelectrodes offer a simple alternative to the traditional semiconductor–liquid junction and the conventional p–n junction electrode. Highly efficient MIS photoanodes require interfacial surface passivating oxides and high workfunction metals to produce a high photovoltage. Herein, we investigate and analyze the effect of interfacial oxides and metal workfunctions on the barrier height and the photovoltage of a c-Si photoanode. We use two metal components in a bimetal contact configuration and observe the modulation of the effective barrier height and the resulting photovoltage as a function of the secondary outer metal. The photovoltage shows a strong linear dependence by increasing the inner metal workfunction, with the highest photovoltage achieved by a MIS photoanode using a platinum inner metal. We also found that coupling a thin aluminium oxide with an interfacial silicon oxide and controlling the oxide thickness can significantly improve the photovoltage of an MIS junction photoanode.
- Open Access
- 29 June 2017
- Published by Springer Nature in Nature Communications
- Vol. 8 (1) , 15968
Interfacial engineering of metal-insulator-semiconductor junctions for efficient and stable photoelectrochemical water oxidation
Solar-assisted water splitting can potentially provide an efficient route for large-scale renewable energy conversion and storage. It is essential for such a system to provide a sufficiently high photocurrent and photovoltage to drive the water oxidation reaction. Here we demonstrate a photoanode that is capable of achieving a high photovoltage by engineering the interfacial energetics of metal–insulator–semiconductor junctions. We evaluate the importance of using two metals to decouple the functionalities for a Schottky contact and a highly efficient catalyst. We also illustrate the improvement of the photovoltage upon incidental oxidation of the metallic surface layer in KOH solution. Additionally, we analyse the role of the thin insulating layer to the pinning and depinning of Fermi level that is responsible to the resulting photovoltage. Finally, we report the advantage of using dual metal overlayers as a simple protection route for highly efficient metal–insulator–semiconductor photoanodes by showing over 200 h of operational stability.
- 29 June 2017
- Published by Springer Nature in Nature Communications
- Vol. 8 (1) , 15968
Open AccessInterfacial engineering of metal-insulator-semiconductor junctions for efficient and stable photoelectrochemical water oxidation
Solar-assisted water splitting can potentially provide an efficient route for large-scale renewable energy conversion and storage. It is essential for such a system to provide a sufficiently high photocurrent and photovoltage to drive the water oxidation reaction. Here we demonstrate a photoanode that is capable of achieving a high photovoltage by engineering the interfacial energetics of metal–insulator–semiconductor junctions. We evaluate the importance of using two metals to decouple the functionalities for a Schottky contact and a highly efficient catalyst. We also illustrate the improvement of the photovoltage upon incidental oxidation of the metallic surface layer in KOH solution. Additionally, we analyse the role of the thin insulating layer to the pinning and depinning of Fermi level that is responsible to the resulting photovoltage. Finally, we report the advantage of using dual metal overlayers as a simple protection route for highly efficient metal–insulator–semiconductor photoanodes by showing over 200 h of operational stability.
- Open Access
- 26 May 2017
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 10 (6) , 1517-1529
Near-complete suppression of surface losses and total internal quantum efficiency in BiVO4 photoanodes
Bismuth vanadate (BiVO4) is one of the most efficient light absorbing metal oxides for solar water splitting.
- 26 May 2017
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 10 (6) , 1517-1529
Open AccessNear-complete suppression of surface losses and total internal quantum efficiency in BiVO4 photoanodes
Bismuth vanadate (BiVO4) is one of the most efficient light absorbing metal oxides for solar water splitting.
- 21 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3620-3624
Solar fuel production by using PV/PEC junctions based on earth-abundant materials
One of the main problems of renewable energies is storage of the energy carrier. For long-term storage, solar fuels seem to be a good option. Direct solar water splitting could play an important role in the production of these solar fuels. One of the main challenges of this process is the charge separation and collection at the interfaces. The knowledge on photovoltaic (PV) junctions can be used to tackle this challenge. In this work, the use of doped layers to enhance the electric field in an a-SiC:H photocathode, and the use of thin-film silicon multijunction devices to achieve a stand-alone solar water splitting device are discussed. Using a p-i-n structure as a-SiC:H photocathode, a current density of 10mA/cm2 is achievable. The p-i-n structure proposed also indicates the suitability of traditional PV structures for solar water splitting. In addition, hybrid devices, including a silicon heterojunction PV device, are proposed. A combination of the a-SiC:H photocathode with a nc-Si:H/c-Si is demonstrated and potential STH efficiencies of 7.9% have been achieved. Furthermore, a purely PV approach such as a triple junction a-Si:H/nc-Si:H/nc-Si:H solar cell is demonstrated, with solar-to-hydrogen (STH) efficiencies of 9.8%.
- 21 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3620-3624
Solar fuel production by using PV/PEC junctions based on earth-abundant materials
One of the main problems of renewable energies is storage of the energy carrier. For long-term storage, solar fuels seem to be a good option. Direct solar water splitting could play an important role in the production of these solar fuels. One of the main challenges of this process is the charge separation and collection at the interfaces. The knowledge on photovoltaic (PV) junctions can be used to tackle this challenge. In this work, the use of doped layers to enhance the electric field in an a-SiC:H photocathode, and the use of thin-film silicon multijunction devices to achieve a stand-alone solar water splitting device are discussed. Using a p-i-n structure as a-SiC:H photocathode, a current density of 10mA/cm2 is achievable. The p-i-n structure proposed also indicates the suitability of traditional PV structures for solar water splitting. In addition, hybrid devices, including a silicon heterojunction PV device, are proposed. A combination of the a-SiC:H photocathode with a nc-Si:H/c-Si is demonstrated and potential STH efficiencies of 7.9% have been achieved. Furthermore, a purely PV approach such as a triple junction a-Si:H/nc-Si:H/nc-Si:H solar cell is demonstrated, with solar-to-hydrogen (STH) efficiencies of 9.8%.
- Open Access
- 1 June 2016
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 150, 82-87
A thin-film silicon/silicon hetero-junction hybrid solar cell for photoelectrochemical water-reduction applications
- 1 June 2016
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 150, 82-87
Open AccessA thin-film silicon/silicon hetero-junction hybrid solar cell for photoelectrochemical water-reduction applications
- 30 March 2016
- Published by Wiley in Chemnanomat
- Vol. 2 (7) , 739-747
The Role of Size and Dimerization of Decorating Plasmonic Silver Nanoparticles on the Photoelectrochemical Solar Water Splitting Performance of BiVO4Photoanodes
Ag nanoparticles (NPs) are deposited on BiVO4photoanodes to study their effect on the photoelectrochemical (PEC) water splitting performance of the semiconductor. 15 nm light‐absorbing NPs and 65 nm light scattering NPs were studied separately to compare their light trapping ability for enhancing the semiconductor's absorption through light concentration and light scattering, respectively. The 15 nm NPs enhanced the BiVO4external quantum efficiency throughout the semiconductor's absorption range (e.g., ≈2.5 fold atλ=400 nm). However, when a hole scavenger was added to the electrolyte, no enhancement was observed upon NP deposition, indicating that the NPs only facilitate the injection of holes from the semiconductor surface to the electrolyte but do not enhance its absorption. On the other hand, the 65 nm scattering NPs not only facilitated hole injection to the electrolyte, but also enhanced the absorption of the semiconductor (by ≈6 %) through light scattering. Such a dual effect, i.e., of enhancing both the surface properties and the absorption of the semiconductor, makes light scattering Ag NPs an ideal decoration for PEC water splitting photoelectrodes.
- 30 March 2016
- Published by Wiley in Chemnanomat
- Vol. 2 (7) , 739-747
The Role of Size and Dimerization of Decorating Plasmonic Silver Nanoparticles on the Photoelectrochemical Solar Water Splitting Performance of BiVO4Photoanodes
Ag nanoparticles (NPs) are deposited on BiVO4photoanodes to study their effect on the photoelectrochemical (PEC) water splitting performance of the semiconductor. 15 nm light‐absorbing NPs and 65 nm light scattering NPs were studied separately to compare their light trapping ability for enhancing the semiconductor's absorption through light concentration and light scattering, respectively. The 15 nm NPs enhanced the BiVO4external quantum efficiency throughout the semiconductor's absorption range (e.g., ≈2.5 fold atλ=400 nm). However, when a hole scavenger was added to the electrolyte, no enhancement was observed upon NP deposition, indicating that the NPs only facilitate the injection of holes from the semiconductor surface to the electrolyte but do not enhance its absorption. On the other hand, the 65 nm scattering NPs not only facilitated hole injection to the electrolyte, but also enhanced the absorption of the semiconductor (by ≈6 %) through light scattering. Such a dual effect, i.e., of enhancing both the surface properties and the absorption of the semiconductor, makes light scattering Ag NPs an ideal decoration for PEC water splitting photoelectrodes.
- 25 February 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (18) , 6842-6852
Engineering the kinetics and interfacial energetics of Ni/Ni–Mo catalyzed amorphous silicon carbide photocathodes in alkaline media
The photoelectrochemical performance of a-SiC photocathodes was enhanced by using a Ni/Ni-Mo dual-catalyst resulting in a significant increase of photocurrent density of −14 mA cm−2 at 0 V vs. RHE.
- 25 February 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (18) , 6842-6852
Engineering the kinetics and interfacial energetics of Ni/Ni–Mo catalyzed amorphous silicon carbide photocathodes in alkaline media
The photoelectrochemical performance of a-SiC photocathodes was enhanced by using a Ni/Ni-Mo dual-catalyst resulting in a significant increase of photocurrent density of −14 mA cm−2 at 0 V vs. RHE.
- 8 April 2015
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 8 (5) , 1585-1593
Extracting large photovoltages from a-SiC photocathodes with an amorphous TiO2 front surface field layer for solar hydrogen evolution
A p–i–n junction photocathode made from 110 nm (p/i) amorphous SiC and an (n) TiO2 top layer leads to an onset potential of +0.8 VRHE and a photocurrent density of 8.3 mA cm−2 at 0 VRHE using only earth abundant materials.
- 8 April 2015
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 8 (5) , 1585-1593
Extracting large photovoltages from a-SiC photocathodes with an amorphous TiO2 front surface field layer for solar hydrogen evolution
A p–i–n junction photocathode made from 110 nm (p/i) amorphous SiC and an (n) TiO2 top layer leads to an onset potential of +0.8 VRHE and a photocurrent density of 8.3 mA cm−2 at 0 VRHE using only earth abundant materials.