Amit Kachroo
Research Subjects
Amit Kachroo has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Sabit Ekin
Texas A&M University
6 shared publications - Ali Imran
AI4Networks Research Center, School of Electrical and Computer Engineering, The University of Oklahoma, Norman, OK, USA
3 shared publications Mehmet Kemal Ozdemir
School of Engineering and Natural Sciences Istanbul Medipol University Istanbul Turkey
3 shared publications- Nann Win Moe Thet
Resilient ICT Research Center, National Institute of Information and Communications Technology (NICT), Sendai, Japan
2 shared publications Adam Coffey
Oklahoma State University
1 shared publicationAdithya Popuri
Oklahoma State Univ, Sch Elect & Comp Engn, Stillwater, OK 74078 USA
1 shared publication
Latest Publications
- Open Access
- 2 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 58-69
Detecting Database Migration Non-equivalence through LLM-Assisted Mutation-Score-Guided Testing
- 2 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 58-69
Open AccessDetecting Database Migration Non-equivalence through LLM-Assisted Mutation-Score-Guided Testing
- 5 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (10) , 6691-6701
Emulating UAV Motion by Utilizing Robotic Arm for mmWave Wireless Channel Characterization
In this article, millimeter-wave (mmWave) wireless channel characteristics (Doppler spread and path loss modeling) for unmanned aerial vehicle (UAV)-assisted communication is analyzed and studied by emulating the real UAV motion using a robotic arm. The motion considers the actual turbulence caused by the wind gusts to the UAV in the atmosphere, which is statistically modeled by the widely used Dryden wind model. The frequency under consideration is 28 GHz in an anechoic chamber setting. A total of 11 distance points from 3.5 to 23.5 ft in increments of 2 ft were considered in this experiment. At each distance point, three samples of data were collected for better inference purposes. In this emulated environment, it was found out that the average Doppler spread at these different distances was around −20 and +20 Hz at the noise floor of −60 dB. On the other hand, the path loss exponent was found to be 1.843. This study presents and lays out a novel framework of emulating UAV motion for mmWave communication systems, which will pave the way out for future design and implementation of next-generation UAV-assisted wireless communication systems.
- 5 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (10) , 6691-6701
Emulating UAV Motion by Utilizing Robotic Arm for mmWave Wireless Channel Characterization
In this article, millimeter-wave (mmWave) wireless channel characteristics (Doppler spread and path loss modeling) for unmanned aerial vehicle (UAV)-assisted communication is analyzed and studied by emulating the real UAV motion using a robotic arm. The motion considers the actual turbulence caused by the wind gusts to the UAV in the atmosphere, which is statistically modeled by the widely used Dryden wind model. The frequency under consideration is 28 GHz in an anechoic chamber setting. A total of 11 distance points from 3.5 to 23.5 ft in increments of 2 ft were considered in this experiment. At each distance point, three samples of data were collected for better inference purposes. In this emulated environment, it was found out that the average Doppler spread at these different distances was around −20 and +20 Hz at the noise floor of −60 dB. On the other hand, the path loss exponent was found to be 1.843. This study presents and lays out a novel framework of emulating UAV motion for mmWave communication systems, which will pave the way out for future design and implementation of next-generation UAV-assisted wireless communication systems.
- Open Access
Interference Spreading through Random Subcarrier Allocation Technique and Its Error Rate Performance in Cognitive Radio Networks
In this letter, we investigate the idea of interference spreading and its effect on bit error rate (BER) performance in a cognitive radio network (CRN). The interference spreading phenomenon is caused because of the random allocation of subcarriers in an orthogonal frequency division multiplexing (OFDM)-based CRN without any spectrum-sensing mechanism. The CRN assumed in this work is of underlay configuration, where the frequency bands are accessed concurrently by both primary users (PUs) and secondary users (SUs). With random allocation, subcarrier collisions occur among the carriers of primary users (PUs) and secondary users (SUs), leading to interference among subcarriers. This interference caused by subcarrier collisions spreads out across multiple subcarriers of PUs rather than on an individual PU, therefore avoiding high BER for an individual PU. Theoretical and simulated signal to interference and noise ratio (SINR) for collision and no-collision cases are validated for M-quadrature amplitude modulation (M-QAM) techniques. Similarly, theoretical BER performance expressions are found and compared for M-QAM modulation orders under Rayleigh fading channel conditions. The BER for different modulation orders of M-QAM are compared and the relationship of average BER with interference temperature is also explored further.
Open AccessInterference Spreading through Random Subcarrier Allocation Technique and Its Error Rate Performance in Cognitive Radio Networks
In this letter, we investigate the idea of interference spreading and its effect on bit error rate (BER) performance in a cognitive radio network (CRN). The interference spreading phenomenon is caused because of the random allocation of subcarriers in an orthogonal frequency division multiplexing (OFDM)-based CRN without any spectrum-sensing mechanism. The CRN assumed in this work is of underlay configuration, where the frequency bands are accessed concurrently by both primary users (PUs) and secondary users (SUs). With random allocation, subcarrier collisions occur among the carriers of primary users (PUs) and secondary users (SUs), leading to interference among subcarriers. This interference caused by subcarrier collisions spreads out across multiple subcarriers of PUs rather than on an individual PU, therefore avoiding high BER for an individual PU. Theoretical and simulated signal to interference and noise ratio (SINR) for collision and no-collision cases are validated for M-quadrature amplitude modulation (M-QAM) techniques. Similarly, theoretical BER performance expressions are found and compared for M-QAM modulation orders under Rayleigh fading channel conditions. The BER for different modulation orders of M-QAM are compared and the relationship of average BER with interference temperature is also explored further.
- 9 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 69 (5) , 5102-5114
Statistical Modelling of Dynamic Interference Threshold and Its Effect on Network Capacity
In this paper, we present the case of utilizing interference temperature (IT) as a dynamic quantity rather than as a fixed quantity in an orthogonal frequency division multiple access (OFDMA) based spectrum sharing systems. The fundamental idea here is to reflect the changing capacity demand of primary user (PU) over time in setting the interference power threshold for secondary user (SU). This type of dynamic IT will allow the SU to opportunistically have higher transmit power during relaxed IT period, thereby resulting in higher network capacity. The cognitive radio network (CRN) considered in this paper has an underlay network configuration in which the available spectrum of the PU is accessed concurrently by SU provided that the interference power at the PU receiver from SU is under a certain power threshold. This power threshold is set to maintain and guarantee a certain level of quality of service (QoS) for PU network. Theoretical expressions for outage probability and mean capacity for SU network are derived, and validated with simulation results, and it is observed that utilizing dynamic IT results in high network performance gains as compared to utilizing a fixed IT in cognitive radio system.
- 9 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 69 (5) , 5102-5114
Statistical Modelling of Dynamic Interference Threshold and Its Effect on Network Capacity
In this paper, we present the case of utilizing interference temperature (IT) as a dynamic quantity rather than as a fixed quantity in an orthogonal frequency division multiple access (OFDMA) based spectrum sharing systems. The fundamental idea here is to reflect the changing capacity demand of primary user (PU) over time in setting the interference power threshold for secondary user (SU). This type of dynamic IT will allow the SU to opportunistically have higher transmit power during relaxed IT period, thereby resulting in higher network capacity. The cognitive radio network (CRN) considered in this paper has an underlay network configuration in which the available spectrum of the PU is accessed concurrently by SU provided that the interference power at the PU receiver from SU is under a certain power threshold. This power threshold is set to maintain and guarantee a certain level of quality of service (QoS) for PU network. Theoretical expressions for outage probability and mean capacity for SU network are derived, and validated with simulation results, and it is observed that utilizing dynamic IT results in high network performance gains as compared to utilizing a fixed IT in cognitive radio system.
- Open Access
Statistical Modelling of Dynamic Interference Threshold and Its Effect on Network Capacity
In this paper, we present the case of utilizing interference temperature (IT) as a dynamic quantity rather than as a fixed quantity in an orthogonal frequency division multiple access (OFDMA) based spectrum sharing systems. The fundamental idea here is to reflect the changing capacity demand of primary user (PU) over time in setting the interference power threshold for secondary user (SU). This type of dynamic IT will allow the SU to opportunistically have higher transmit power during relaxed IT period, thereby resulting in higher network capacity. The cognitive radio network (CRN) considered in this paper has an underlay network configuration in which the available spectrum of the PU is accessed concurrently by SU provided that the interference power at the PU receiver from SU is under a certain power threshold. This power threshold is set to maintain and guarantee a certain level of quality of service (QoS) for PU network. Theoretical expressions for outage probability and mean capacity for SU network are derived, and validated with simulation results, and it is observed that utilizing dynamic IT results in high network performance gains as compared to utilizing a fixed IT in cognitive radio system.
Open AccessStatistical Modelling of Dynamic Interference Threshold and Its Effect on Network Capacity
In this paper, we present the case of utilizing interference temperature (IT) as a dynamic quantity rather than as a fixed quantity in an orthogonal frequency division multiple access (OFDMA) based spectrum sharing systems. The fundamental idea here is to reflect the changing capacity demand of primary user (PU) over time in setting the interference power threshold for secondary user (SU). This type of dynamic IT will allow the SU to opportunistically have higher transmit power during relaxed IT period, thereby resulting in higher network capacity. The cognitive radio network (CRN) considered in this paper has an underlay network configuration in which the available spectrum of the PU is accessed concurrently by SU provided that the interference power at the PU receiver from SU is under a certain power threshold. This power threshold is set to maintain and guarantee a certain level of quality of service (QoS) for PU network. Theoretical expressions for outage probability and mean capacity for SU network are derived, and validated with simulation results, and it is observed that utilizing dynamic IT results in high network performance gains as compared to utilizing a fixed IT in cognitive radio system.
- Open Access
- 30 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 73741-73750
Unmanned Aerial Vehicle-to-Wearables (UAV2W) Indoor Radio Propagation Channel Measurements and Modeling
- 30 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 73741-73750
Open AccessUnmanned Aerial Vehicle-to-Wearables (UAV2W) Indoor Radio Propagation Channel Measurements and Modeling
- 22 April 2019
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 30 (12)
Extended reduced‐rank joint estimation of direction of arrival with mutual coupling for coherent signals
This paper proposes an extended method for direction‐of‐arrival (DOA) estimation with unknown mutual coupling for coherent signals. The proposed method employs the forward/backward spatial smoothing to decorrelate the coherent signals in the process of rank reduction with the joint iterative subspace optimization approach. Then, the autocalibration of mutual coupling is performed based on the Capon's minimum variance criterion. Performance of the proposed method is compared with the state of the art algorithms in terms of DOA root‐mean‐square error and in terms of probability of successful estimation, where successful estimation is the case when the average of absolute DOA estimation error is within 2.5°. It is shown that the proposed method has a similar performance as the state of the art autocalibration methods while offering a lower computational complexity.
- 22 April 2019
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 30 (12)
Extended reduced‐rank joint estimation of direction of arrival with mutual coupling for coherent signals
This paper proposes an extended method for direction‐of‐arrival (DOA) estimation with unknown mutual coupling for coherent signals. The proposed method employs the forward/backward spatial smoothing to decorrelate the coherent signals in the process of rank reduction with the joint iterative subspace optimization approach. Then, the autocalibration of mutual coupling is performed based on the Capon's minimum variance criterion. Performance of the proposed method is compared with the state of the art algorithms in terms of DOA root‐mean‐square error and in terms of probability of successful estimation, where successful estimation is the case when the average of absolute DOA estimation error is within 2.5°. It is shown that the proposed method has a similar performance as the state of the art autocalibration methods while offering a lower computational complexity.
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Impact of Secondary User Interference on Primary Network in Cognitive Radio Systems
Most of the research in cognitive radio field is primarily focused on finding and improving secondary user (SU) performance parameters such as bit error rate, outage probability and capacity etc. Less attention is being paid towards the other side of the network that is the primary network which is under interference from SU. Also, it is the primary user (PU) that decides upon the interference temperature constraint for power adaptation to maintain a certain level of quality of service while providing access to SUs. However, given the random nature of wireless communication, interference temperature can be regulated dynamically to overcome the bottlenecks in entire network performance. In order to do so, we need to analyze the primary network carefully. This study tries to fill this gap by analytically finding the closed form theoretical expressions for signal to interference and noise ratio (SINR), mean SINR, instantaneous capacity, mean capacity and outage probability of PU, while taking peak transmit power adaptation at SU into picture. Furthermore, the expressions generated are validated with the simulation results and it is found that our theoretical derivations are in perfect accord with the simulation outcomes.
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Impact of Secondary User Interference on Primary Network in Cognitive Radio Systems
Most of the research in cognitive radio field is primarily focused on finding and improving secondary user (SU) performance parameters such as bit error rate, outage probability and capacity etc. Less attention is being paid towards the other side of the network that is the primary network which is under interference from SU. Also, it is the primary user (PU) that decides upon the interference temperature constraint for power adaptation to maintain a certain level of quality of service while providing access to SUs. However, given the random nature of wireless communication, interference temperature can be regulated dynamically to overcome the bottlenecks in entire network performance. In order to do so, we need to analyze the primary network carefully. This study tries to fill this gap by analytically finding the closed form theoretical expressions for signal to interference and noise ratio (SINR), mean SINR, instantaneous capacity, mean capacity and outage probability of PU, while taking peak transmit power adaptation at SU into picture. Furthermore, the expressions generated are validated with the simulation results and it is found that our theoretical derivations are in perfect accord with the simulation outcomes.
- 6 July 2018
- Published by Springer Nature
- p. 137-147
Position at Response: A Novel Highly Accurate and Low Cost Laser Positioning System
- 6 July 2018
- Published by Springer Nature
- p. 137-147
Position at Response: A Novel Highly Accurate and Low Cost Laser Positioning System
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Reduced-rank joint estimation of DOA with mutual coupling
In this paper, an extended reduced-rank direction-of-arrival (DOA) estimation with unknown mutual coupling in uniform linear array (ULA) structure is presented. The proposed method is based on the joint iterative subspace optimization (JIO) and the auto-calibration of mutual coupling. Given an initial coupling vector, reduced-rank correlation matrix is estimated with the JIO approach, followed by iterative joint estimation of DOA and coupling with an auto-calibration algorithm. Simulation results show that both the proposed method and the existing auto-calibration method have similar performance in terms of DOA root mean square error, while the complexity of the proposed method is much lower than that of the auto-calibration approach due to the reduced rank.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Reduced-rank joint estimation of DOA with mutual coupling
In this paper, an extended reduced-rank direction-of-arrival (DOA) estimation with unknown mutual coupling in uniform linear array (ULA) structure is presented. The proposed method is based on the joint iterative subspace optimization (JIO) and the auto-calibration of mutual coupling. Given an initial coupling vector, reduced-rank correlation matrix is estimated with the JIO approach, followed by iterative joint estimation of DOA and coupling with an auto-calibration algorithm. Simulation results show that both the proposed method and the existing auto-calibration method have similar performance in terms of DOA root mean square error, while the complexity of the proposed method is much lower than that of the auto-calibration approach due to the reduced rank.