Jian Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jian Li has a total of 188 co-authors. Here are the top co-authors by number of shared publications:
Peng Mu
22 shared publicationsWeimin Liu
Key Laboratory of Eco-Functional Polymer Materials of the Ministry of Education, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, P.R. China
18 shared publicationsBin Xiang
17 shared publicationsFei Zha
College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
10 shared publicationsJingling Gong
10 shared publicationsSuyue Zhong
10 shared publications
Latest Publications
- 10 November 2026
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (22) , 9516-9533
CS/ACNT@MOF composite membranes with hydration-layer anti-fouling and photocatalytic degradation for efficient oil–water emulsion purification
Schematic diagram of the separation and anti-fouling mechanism of CS/ACNT@MOF composite membrane.
- 10 November 2026
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (22) , 9516-9533
CS/ACNT@MOF composite membranes with hydration-layer anti-fouling and photocatalytic degradation for efficient oil–water emulsion purification
Schematic diagram of the separation and anti-fouling mechanism of CS/ACNT@MOF composite membrane.
- 10 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (37) , 50811-50820
Integrating a Phase-Change Core and a Photothermal Fabric Shell for High-Efficiency Solar Desalination and Water Treatment
Water stress presents a critical threat to the advancement of global sustainable development. With the advantages of low-carbon operation and high efficiency, solar-driven interfacial evaporation has emerged as a highly promising technology. However, the inherent intermittency of solar energy severely limits its continuous operation and practical application. To achieve this goal, this work proposes an innovative design strategy of matrix stabilization-functional encapsulation, constructing a functionally integrated “energy storage core–evaporation shell” core–shell structure evaporator. This evaporator employs an inner composite phase-change aerogel as its thermal management core, enabling controlled heat storage and release. The outer layer utilizes polypyrrole (PPy)-modified hydrophilic nonwoven fabric to simultaneously achieve favorable photothermal conversion and rapid directional water transfer. Consequently, the thermal management pathway and water transport pathway are synergistically optimized, effectively resolving issues such as insufficient coupling between thermal and water pathways. Experiments demonstrate that this evaporator achieves 97% solar absorption efficiency, with an evaporation rate of 2.22 kg m−2 h−1 and a photothermal conversion efficiency of 96.04%. Even after illumination ceases, the system can sustain evaporation at a rate of 0.92 kg m−2 h−1 for 1 h, a process driven by latent heat released from phase-change materials. This enables the evaporation process to extend from illuminated periods to nonilluminated periods. Furthermore, the evaporator demonstrates outstanding stability and purification performance in various complex water environments. Through synergistic structural and material design, this work achieves efficient integration of energy storage units with an evaporation interface.
- 10 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (37) , 50811-50820
Integrating a Phase-Change Core and a Photothermal Fabric Shell for High-Efficiency Solar Desalination and Water Treatment
Water stress presents a critical threat to the advancement of global sustainable development. With the advantages of low-carbon operation and high efficiency, solar-driven interfacial evaporation has emerged as a highly promising technology. However, the inherent intermittency of solar energy severely limits its continuous operation and practical application. To achieve this goal, this work proposes an innovative design strategy of matrix stabilization-functional encapsulation, constructing a functionally integrated “energy storage core–evaporation shell” core–shell structure evaporator. This evaporator employs an inner composite phase-change aerogel as its thermal management core, enabling controlled heat storage and release. The outer layer utilizes polypyrrole (PPy)-modified hydrophilic nonwoven fabric to simultaneously achieve favorable photothermal conversion and rapid directional water transfer. Consequently, the thermal management pathway and water transport pathway are synergistically optimized, effectively resolving issues such as insufficient coupling between thermal and water pathways. Experiments demonstrate that this evaporator achieves 97% solar absorption efficiency, with an evaporation rate of 2.22 kg m−2 h−1 and a photothermal conversion efficiency of 96.04%. Even after illumination ceases, the system can sustain evaporation at a rate of 0.92 kg m−2 h−1 for 1 h, a process driven by latent heat released from phase-change materials. This enables the evaporation process to extend from illuminated periods to nonilluminated periods. Furthermore, the evaporator demonstrates outstanding stability and purification performance in various complex water environments. Through synergistic structural and material design, this work achieves efficient integration of energy storage units with an evaporation interface.
- 25 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Photothermally Triggered Phase-Change Solid Slippery Surface with Self-Healing for Durable Corrosion Protection of Magnesium Alloy
Slippery liquid-infused porous surfaces (SLIPS) have shown great potential in anti-corrosion applications because of excellent liquid repellency and barrier properties. However, the inevitable depletion and migration of liquid lubricants, together with limited mechanical durability, severely restrict the long-term anti-corrosion performance. In this work, a photothermally triggered phase-change solid slippery surface (SSS) with self-healing capability was developed on magnesium alloy by infusing paraffin into a natural wollastonite (NW)/ZIF-67/GO hierarchical structure. Electrochemical measurements demonstrate that the SSS exhibits an ultralow corrosion current density of 1.442 × 10–9 A cm–2, which is five orders of magnitude lower than that of bare Mg alloy, together with a high polarization resistance of 8.537 × 108 Ω and a corrosion protection efficiency of 99.99%. After photothermal self-healing, the healed SSS still maintains a low corrosion current density of 3.907 × 10–8 A cm–2 and a protection efficiency of 99.97%, confirming the effective recovery of its barrier performance. Moreover, the low-frequency impedance modulus at 0.01 Hz remains at the 105 Ω cm2 level even after 240 h of immersion in a 3.5 wt % NaCl solution, indicating durable corrosion resistance. In addition, owing to the synergistic effects of paraffin sealing, porous confinement, and photothermal responsiveness, the obtained SSS exhibits excellent anti-contamination behavior, remarkable stability against water-jet impact, ultrasonic treatment, and acid/alkali exposure, as well as rapid scratch repair. This work offers new insight into the design of long-term anti-corrosion coatings for magnesium alloys.
- 25 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Photothermally Triggered Phase-Change Solid Slippery Surface with Self-Healing for Durable Corrosion Protection of Magnesium Alloy
Slippery liquid-infused porous surfaces (SLIPS) have shown great potential in anti-corrosion applications because of excellent liquid repellency and barrier properties. However, the inevitable depletion and migration of liquid lubricants, together with limited mechanical durability, severely restrict the long-term anti-corrosion performance. In this work, a photothermally triggered phase-change solid slippery surface (SSS) with self-healing capability was developed on magnesium alloy by infusing paraffin into a natural wollastonite (NW)/ZIF-67/GO hierarchical structure. Electrochemical measurements demonstrate that the SSS exhibits an ultralow corrosion current density of 1.442 × 10–9 A cm–2, which is five orders of magnitude lower than that of bare Mg alloy, together with a high polarization resistance of 8.537 × 108 Ω and a corrosion protection efficiency of 99.99%. After photothermal self-healing, the healed SSS still maintains a low corrosion current density of 3.907 × 10–8 A cm–2 and a protection efficiency of 99.97%, confirming the effective recovery of its barrier performance. Moreover, the low-frequency impedance modulus at 0.01 Hz remains at the 105 Ω cm2 level even after 240 h of immersion in a 3.5 wt % NaCl solution, indicating durable corrosion resistance. In addition, owing to the synergistic effects of paraffin sealing, porous confinement, and photothermal responsiveness, the obtained SSS exhibits excellent anti-contamination behavior, remarkable stability against water-jet impact, ultrasonic treatment, and acid/alkali exposure, as well as rapid scratch repair. This work offers new insight into the design of long-term anti-corrosion coatings for magnesium alloys.
- Open Access
- 27 June 2026
- Published by Elsevier in SSRN Electronic Journal
Supramolecularly Engineered ZIF-L/GO/Pebax Mixed-Matrix Membranes with Intercalated Network Structures for Enhanced CO2/N2 Separation
Membrane separation has emerged as competitive energy-efficient approach for carbon capture and flue gas treatment. Membrane materials and structures are the core of gas separation membranes, which collectively govern gas molecular mass transfer and separation behaviors. Two-dimensional (2D) graphene oxide (GO) porous nanosheets hold great promise for gas separation due to their nanoscale thickness and structural tunability, but they are often limited by low permeability. Herein, we propose supramolecularly strategy to fabricate ZIF-L/GO/Pebax mixed matrix membranes with intercalated network architectures for efficient CO2/N2 separation. Leaf-like ZIF-L expands the interlayer spacing of GO nanosheets and constructs high-speed continuous gas transport pathways within the membrane. This unique intercalated structure provides abundant CO2-philic sites, significantly enhancing CO2 solubility and enabling highly selective gas molecular sieving. Moreover, hydrogen bonds and chelation coordination interactions between ZIF-L/GO and polymer matrix ensure excellent interfacial compatibility while reinforcing structural stability. This supramolecular structural engineering approach effectively mitigates the limitations of traditional membranes, achieving CO2 permeability of 1000.8 Barrer and CO2/N2 selectivity of 45, exceeding the 2008 Robeson upper bound and approaching the 2019 limit. Additionally, the membrane displays superior mechanical properties and long-term operational stability, providing a promising avenue toward high-performance materials for efficient CO2 capture.
- 27 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSupramolecularly Engineered ZIF-L/GO/Pebax Mixed-Matrix Membranes with Intercalated Network Structures for Enhanced CO2/N2 Separation
Membrane separation has emerged as competitive energy-efficient approach for carbon capture and flue gas treatment. Membrane materials and structures are the core of gas separation membranes, which collectively govern gas molecular mass transfer and separation behaviors. Two-dimensional (2D) graphene oxide (GO) porous nanosheets hold great promise for gas separation due to their nanoscale thickness and structural tunability, but they are often limited by low permeability. Herein, we propose supramolecularly strategy to fabricate ZIF-L/GO/Pebax mixed matrix membranes with intercalated network architectures for efficient CO2/N2 separation. Leaf-like ZIF-L expands the interlayer spacing of GO nanosheets and constructs high-speed continuous gas transport pathways within the membrane. This unique intercalated structure provides abundant CO2-philic sites, significantly enhancing CO2 solubility and enabling highly selective gas molecular sieving. Moreover, hydrogen bonds and chelation coordination interactions between ZIF-L/GO and polymer matrix ensure excellent interfacial compatibility while reinforcing structural stability. This supramolecular structural engineering approach effectively mitigates the limitations of traditional membranes, achieving CO2 permeability of 1000.8 Barrer and CO2/N2 selectivity of 45, exceeding the 2008 Robeson upper bound and approaching the 2019 limit. Additionally, the membrane displays superior mechanical properties and long-term operational stability, providing a promising avenue toward high-performance materials for efficient CO2 capture.
- Open Access
- 26 February 2026
- Published by Elsevier in SSRN Electronic Journal
CS/ACNT@MOF Composite Membrane with Enhanced Photocatalytic Self-Cleaning Performance for Antifouling Oil–Water Emulsion Separation
To address the challenge of irreversible membrane fouling caused by highly emulsified oily wastewater, this study proposed a synergistic “hydration layer–photocatalysis” self-cleaning strategy and constructed a chitosan/acidified carbon nanotube@UiO-66-NH2 (CS/ACNT@MOF) composite membrane. The carbon network and photothermal effect of ACNT accelerated the separation and migration of photogenerated charge carriers in the UiO-66-NH2. Under visible-light irradiation, UiO-66-NH2 in situ generated reactive species (•OH/•O2−), which continuously degraded strongly adsorbed organic pollutants within membrane pores into removable small molecules. The degradation efficiency of Rhodamine B (Rh B) reached 99% within 60 min. Meanwhile, CS and the oxygen-containing functional groups on the ACNT surface formed a highly hydrated layer, suppressing dark-state re-adsorption. This design overcame the limitations of traditional passive antifouling approaches and achieved a closed-loop “anti-adhesion–self-cleaning” mechanism. The composite membrane exhibited separation efficiencies exceeding 99.1% for four types of oil-in-water emulsions, with a maximum permeation flux of up to 1734 L m-2 h-1 bar-1. In addition, the composite membrane showed excellent separation stability, and maintained a water flux recovery ratio (FRR) of 88.1% even after 20 separation cycles. The CS/ACNT@MOF membrane retained high separation performance when treating various complex oily wastewaters and exhibited remarkable chemical and mechanical stability, thereby providing a promising strategy for efficient separation of highly complex oil–water systems.
- 26 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCS/ACNT@MOF Composite Membrane with Enhanced Photocatalytic Self-Cleaning Performance for Antifouling Oil–Water Emulsion Separation
To address the challenge of irreversible membrane fouling caused by highly emulsified oily wastewater, this study proposed a synergistic “hydration layer–photocatalysis” self-cleaning strategy and constructed a chitosan/acidified carbon nanotube@UiO-66-NH2 (CS/ACNT@MOF) composite membrane. The carbon network and photothermal effect of ACNT accelerated the separation and migration of photogenerated charge carriers in the UiO-66-NH2. Under visible-light irradiation, UiO-66-NH2 in situ generated reactive species (•OH/•O2−), which continuously degraded strongly adsorbed organic pollutants within membrane pores into removable small molecules. The degradation efficiency of Rhodamine B (Rh B) reached 99% within 60 min. Meanwhile, CS and the oxygen-containing functional groups on the ACNT surface formed a highly hydrated layer, suppressing dark-state re-adsorption. This design overcame the limitations of traditional passive antifouling approaches and achieved a closed-loop “anti-adhesion–self-cleaning” mechanism. The composite membrane exhibited separation efficiencies exceeding 99.1% for four types of oil-in-water emulsions, with a maximum permeation flux of up to 1734 L m-2 h-1 bar-1. In addition, the composite membrane showed excellent separation stability, and maintained a water flux recovery ratio (FRR) of 88.1% even after 20 separation cycles. The CS/ACNT@MOF membrane retained high separation performance when treating various complex oily wastewaters and exhibited remarkable chemical and mechanical stability, thereby providing a promising strategy for efficient separation of highly complex oil–water systems.
- 23 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (1) , 319-331
Hierarchical Porous Spongy Hydrogel Evaporator with Mechanical Stability and Salt Resistance for Efficient Solar-Driven Desalination
- 23 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (1) , 319-331
Hierarchical Porous Spongy Hydrogel Evaporator with Mechanical Stability and Salt Resistance for Efficient Solar-Driven Desalination
- 2 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (97) , 19165-19182
Toward sustainable and durable liquid-infused surfaces: a review of lubricant-depletion mitigation strategies
Mechanisms and mitigation strategies for lubricant deleption on liquid-infused slippery surfaces.
- 2 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (97) , 19165-19182
Toward sustainable and durable liquid-infused surfaces: a review of lubricant-depletion mitigation strategies
Mechanisms and mitigation strategies for lubricant deleption on liquid-infused slippery surfaces.