CSChristoph Schmitz

Christoph Schmitz

*This is an algorithmically generated author record based on publicly available information.

Christoph Schmitz has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Valence change detection in memristive oxide based heterostructure cells by hard X-ray photoelectron emission spectroscopy

    by A. Kindsmüller, C. Schmitz, C. Wiemann, K. Skaja, D. J. Wouters, R. Waser, C. M. Schneider, R. Dittmann

    The switching mechanism of valence change resistive memory devices is widely accepted to be an ionic movement of oxygen vacancies resulting in a valence change of the metal cations. However, direct experimental proofs of valence changes in memristive devices are scarce. In this work, we have employed hard X-ray photoelectron emission microscopy (PEEM) to probe local valence changes in Pt/ZrOx/Ta memristive devices. The use of hard X-ray radiation increases the information depth, thus providing chemical information from buried layers. By extracting X-ray photoelectron spectra from different locations in the PEEM images, we show that zirconia in the active device area is reduced compared to a neighbouring region, confirming the valence change in the ZrOx film during electroforming. Furthermore, we succeeded in measuring the Ta 4f spectrum for two different resistance states on the same device. In both states, as well as outside the device region, the Ta electrode is composed of different suboxides without any metallic contribution, hinting to the formation of TaOx during the deposition of the Ta thin film. We observed a reduction of the Ta oxidation state in the low resistance state with respect to the high resistive state. This observation is contradictory to the established model, as the internal redistribution of oxygen between ZrOx and the Ta electrode during switching would lead to an oxidation of the Ta layer in the low resistance state. Instead, we have to conclude that the Ta electrode takes an active part in the switching process in our devices and that oxygen is released and reincorporated in the ZrOx/TaOx bilayer during switching. This is confirmed by the degradation of the high resistance state during endurance measurements under vacuum.


  • Open Access

    Quantifying redox-induced Schottky barrier variations in memristive devices via in operando spectromicroscopy with graphene electrodes

    by Christoph Baeumer, Christoph Schmitz, Astrid Marchewka, David N. Mueller, Richard Valenta, Johanna Hackl, Nicolas Raab, Steven P. Rogers, M. Imtiaz Khan, Slavomir Nemsak, et al.

    The continuing revolutionary success of mobile computing and smart devices calls for the development of novel, cost- and energy-efficient memories. Resistive switching is attractive because of, inter alia, increased switching speed and device density. On electrical stimulus, complex nanoscale redox processes are suspected to induce a resistance change in memristive devices. Quantitative information about these processes, which has been experimentally inaccessible so far, is essential for further advances. Here we use in operando spectromicroscopy to verify that redox reactions drive the resistance change. A remarkable agreement between experimental quantification of the redox state and device simulation reveals that changes in donor concentration by a factor of 2–3 at electrode-oxide interfaces cause a modulation of the effective Schottky barrier and lead to >2 orders of magnitude change in device resistance. These findings allow realistic device simulations, opening a route to less empirical and more predictive design of future memory cells.


  • Compact extreme ultraviolet source for laboratory-based photoemission spectromicroscopy

    by Christoph Schmitz, Daniel Wilson, Denis Rudolf, Carsten Wiemann, Lukasz Plucinski, Sally Riess, Martin Schuck, Hilde Hardtdegen, Claus M. Schneider, F. Stefan Tautz, et al.

    We report on the combination of a state-of-the-art energy-filtering photoemission electron microscope with an intense yet compact laboratory-based gas discharge extreme ultraviolet (EUV) light source. Using a photon energy of 71.7 eV from oxygen plasma (O5+ spectral line), we demonstrate element-selective photoelectron imaging in real space and band structure mapping in reciprocal space. Additionally, the high surface sensitivity of the EUV light was used to study the surface oxidation on islands of the phase-change material Ge1Sb2Te4 . The EUV light source allows the extension of spectromicroscopy, previously only feasible at synchrotron beamlines, to laboratory-based work.


  • Open Access

    Verification of redox-processes as switching and retention failure mechanisms in Nb:SrTiO3/metal devices

    by C. Baeumer, N. Raab, T. Menke, C. Schmitz, R. Rosezin, P. Müller, M. Andrä, V. Feyer, R. Bruchhaus, F. Gunkel, et al.

    We demonstrate that nanoscale redox reactions rather than purely electronic effects are responsible for resistive switching in Pt/Nb:SrTiO3 junctions.


  • Avalanche‐Discharge‐Induced Electrical Forming in Tantalum Oxide‐Based Metal–Insulator–Metal Structures

    by Katharina Skaja, Christoph Bäumer, Oliver Peters, Stephan Menzel, Marco Moors, Hongchu Du, Manuel Bornhöfft, Christoph Schmitz, Vitaliy Feyer, Chun‐Lin Jia, et al.

    Oxide‐based metal–insulator–metal structures are of special interest for future resistive random‐access memories. In such cells, redox processes on the nanoscale occur during resistive switching, which are initiated by the reversible movement of native donors, such as oxygen vacancies. The formation of these filaments is mainly attributed to an enhanced oxygen diffusion due to Joule heating in an electric field or due to electrical breakdown. Here, the development of a dendrite‐like structure, which is induced by an avalanche discharge between the top electrode and the Ta2O5‐x layer, is presented, which occurs instead of a local breakdown between top and bottom electrode. The dendrite‐like structure evolves primarily at structures with a pronounced interface adsorbate layer. Furthermore, local conductive atomic force microscopy reveals that the entire dendrite region becomes conductive. Via spectromicroscopy it is demonstrated that the subsequent switching is caused by a valence change between Ta4+ and Ta5+, which takes place over the entire former Pt/Ta2O5‐x interface of the dendrite‐like structure.


  • Open Access

    Spectromicroscopic insights for rational design of redox-based memristive devices

    by Christoph Baeumer, Christoph Schmitz, Amr H. H. Ramadan, Hongchu Du, Katharina Skaja, Vitaliy Feyer, Philipp Müller, Benedikt Arndt, Chun-Lin Jia, Joachim Mayer, et al.

    The demand for highly scalable, low-power devices for data storage and logic operations is strongly stimulating research into resistive switching as a novel concept for future non-volatile memory devices. To meet technological requirements, it is imperative to have a set of material design rules based on fundamental material physics, but deriving such rules is proving challenging. Here, we elucidate both switching mechanism and failure mechanism in the valence-change model material SrTiO3, and on this basis we derive a design rule for failure-resistant devices. Spectromicroscopy reveals that the resistance change during device operation and failure is indeed caused by nanoscale oxygen migration resulting in localized valence changes between Ti4+ and Ti3+. While fast reoxidation typically results in retention failure in SrTiO3, local phase separation within the switching filament stabilizes the retention. Mimicking this phase separation by intentionally introducing retention-stabilization layers with slow oxygen transport improves retention times considerably.


  • Role of functional groups in surface bonding of planarπ-conjugated molecules

    by Oliver Bauer, Giuseppe Mercurio, Martin Willenbockel, Werner Reckien, Christoph Heinrich Schmitz, Benjamin Fiedler, Serguei Soubatch, Thomas Bredow, Frank Stefan Tautz, Moritz Sokolowski

    The trends in the bonding mechanism of 3,4,9,10-perylenetetracarboxylic acid dianhydride (PTCDA) to the Ag(111), Ag(100), and Ag(110) surfaces were analyzed on the basis of data obtained from x-ray standing waves and dispersion-corrected density functional theory. Of importance are the attractive local O-Ag bonds on the anhydride groups. They are the shorter, the more open the surface is, and lead even to partly repulsive interactions between the perylene core and the surface. In parallel, there is an increasing charge donation from the Ag surface into the π system of the PTCDA. This synergism explains the out-of-plane distortion of the adsorbed PTCDA and the surface buckling. DOI: http://dx.doi.org/10.1103/PhysRevB.86.235431 ©2012 American Physical Society


  • Imaging of vascular chaos

    by Randall L. Barbour, Harry L. Graber, Yaling Pei, Christoph H. Schmitz

    Dynamic processes in biology are often controlled by multiple parameters that interact in a complex nonlinear fashion. Increasingly, evidence has accumulated that such behavior exhibits the property of sensitivity to initial conditions, a feature exhibited by chaotic systems. One such system is the vasculature. In this report, we present what we believe is the first experimental demonstration ever of imaging chaotic behavior of the vasculature in a large tissue structure (i.e., the human forearm). Supporting these findings are results from numerical simulation demonstrating our ability to image and correctly characterize complex dynamic behavior in dense scattering media that experience spatiotemporally coincident variations in hemodynamic states.