Jang-Won Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jang-Won Lee has a total of 147 co-authors. Here are the top co-authors by number of shared publications:
- Hyun-Suk Lee
Sejong University
25 shared publications Byung-Gook Kim
Networks Business Division, Samsung Electronics, Suwon-si, Korea
19 shared publications- Do-Yup Kim
Department of Information and Telecommunication Engineering, Incheon National University, Incheon 22012, Republic of Korea
18 shared publications Hee-Tae Roh
LSIS Company Ltd., Anyang, Korea
18 shared publicationsJeong-Ahn Kwon
Dept. of EEE., Yonsei Univ., 50 Yonsei-ro, Seodaemun-gu, Seoul, Korea
11 shared publicationsSung-Yeon Kim
Department of Electrical and Electronic Engineering, Yonsei University, Seoul, Korea
9 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 169084-169096
Cost-Efficient Parameter Optimization for Intelligent Sensor Systems via Multi-Fidelity Bayesian Optimization
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 169084-169096
Open AccessCost-Efficient Parameter Optimization for Intelligent Sensor Systems via Multi-Fidelity Bayesian Optimization
- 17 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (1) , 523-534
Dedicated AP-Based Interference Cancellation in Cell-Free Massive MIMO Systems: Architecture and Algorithm
Since a cell-free massive multiple-input multiple-output (mMIMO) system employs a large number of access points (APs), which can collaboratively serve user equipments (UEs), its energy and spectral efficiency can be much higher than that of a conventional cellular system. Typically, to improve the performance of the cell-free mMIMO system, the inter-user interference (IUI) should be suppressed appropriately, which usually requires high computational complexity. To resolve this issue, we propose a new cell-free mMIMO architecture, called a dedicated AP-based interference cancellation (DAP-IC) architecture which consists of two types of APs: DS-APs that transmit the data signal to UEs and IUI-APs that transmit the signal to eliminate the IUI. This new architecture can help make low-complexity algorithms for cell-free mMIMO systems while maintaining good performance. In our proposed architecture, we formulate a joint optimization problem to determine the AP roles and precoding vectors for maximizing spectral efficiency while ensuring user fairness. To solve this problem, we develop a precoding and dedicated AP selection (PADAS) algorithm, which jointly optimizes the AP roles and precoding vectors, and evaluate its performance through simulations. To demonstrate the effectiveness of the proposed DAP-IC architecture, we compare our proposed algorithm with the weighted minimum mean square error (WMMSE) algorithm, which is widely used in conventional mMIMO systems since it can provide high performance. Simulation results demonstrate that our PADAS algorithm tailored to the DAP-IC architecture requires significantly lower computational complexity than the WMMSE algorithm for the conventional cell-free mMIMO architecture, while providing comparable performance. These results confirm that the proposed DAP-IC architecture provides an effective balance between performance and complexity, making it a practical solution for large-scale cell-free mMIMO systems.
- 17 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (1) , 523-534
Dedicated AP-Based Interference Cancellation in Cell-Free Massive MIMO Systems: Architecture and Algorithm
Since a cell-free massive multiple-input multiple-output (mMIMO) system employs a large number of access points (APs), which can collaboratively serve user equipments (UEs), its energy and spectral efficiency can be much higher than that of a conventional cellular system. Typically, to improve the performance of the cell-free mMIMO system, the inter-user interference (IUI) should be suppressed appropriately, which usually requires high computational complexity. To resolve this issue, we propose a new cell-free mMIMO architecture, called a dedicated AP-based interference cancellation (DAP-IC) architecture which consists of two types of APs: DS-APs that transmit the data signal to UEs and IUI-APs that transmit the signal to eliminate the IUI. This new architecture can help make low-complexity algorithms for cell-free mMIMO systems while maintaining good performance. In our proposed architecture, we formulate a joint optimization problem to determine the AP roles and precoding vectors for maximizing spectral efficiency while ensuring user fairness. To solve this problem, we develop a precoding and dedicated AP selection (PADAS) algorithm, which jointly optimizes the AP roles and precoding vectors, and evaluate its performance through simulations. To demonstrate the effectiveness of the proposed DAP-IC architecture, we compare our proposed algorithm with the weighted minimum mean square error (WMMSE) algorithm, which is widely used in conventional mMIMO systems since it can provide high performance. Simulation results demonstrate that our PADAS algorithm tailored to the DAP-IC architecture requires significantly lower computational complexity than the WMMSE algorithm for the conventional cell-free mMIMO architecture, while providing comparable performance. These results confirm that the proposed DAP-IC architecture provides an effective balance between performance and complexity, making it a practical solution for large-scale cell-free mMIMO systems.
- Open Access
- 28 February 2025
- Published by Elsevier in ICT Express
- Vol. 11 (2) , 245-257
A review on multi-fidelity hyperparameter optimization in machine learning
- 28 February 2025
- Published by Elsevier in ICT Express
- Vol. 11 (2) , 245-257
Open AccessA review on multi-fidelity hyperparameter optimization in machine learning
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12 (12) , 19882-19900
Optimal Placement of Aerial Base Station Utilizing Topographic Features
In aerial base station (ABS) placement studies, leveraging information on topographic features for air-to-ground (A2G) channel analysis has been considered a promising approach. Recently, this approach has been studied in several works. However, these studies have predominantly focused on simplistic three-dimensional cuboid representations of topographic features, which do not adequately capture the complexity of real-world environments, thereby impeding accurate A2G channel analysis. In this paper, we propose a more advanced strategy by generalizing the shapes and arrangements of topographic features to enable their realistic and accurate representations. Utilizing these generalized topographic models, we study the problem of finding the ABS location for coverage maximization. To solve this problem, we identify so-called line-of-sight (LoS) and non-LoS (NLoS) zones formed by these generalized topographic features through geometric analysis and obtain straightforward derivations of the coverage area for any given ABS location. Building upon this foundation, we develop a new ABS placement strategy, termed the polygonal feature-aware ABS placement algorithm (FA-poly). Our simulation results demonstrate that the proposed FA-poly significantly outperforms existing baseline methods in terms of the coverage area, as it accurately identifies channel conditions by leveraging information on generalized topographic features and obtains the coverage area based on them.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12 (12) , 19882-19900
Optimal Placement of Aerial Base Station Utilizing Topographic Features
In aerial base station (ABS) placement studies, leveraging information on topographic features for air-to-ground (A2G) channel analysis has been considered a promising approach. Recently, this approach has been studied in several works. However, these studies have predominantly focused on simplistic three-dimensional cuboid representations of topographic features, which do not adequately capture the complexity of real-world environments, thereby impeding accurate A2G channel analysis. In this paper, we propose a more advanced strategy by generalizing the shapes and arrangements of topographic features to enable their realistic and accurate representations. Utilizing these generalized topographic models, we study the problem of finding the ABS location for coverage maximization. To solve this problem, we identify so-called line-of-sight (LoS) and non-LoS (NLoS) zones formed by these generalized topographic features through geometric analysis and obtain straightforward derivations of the coverage area for any given ABS location. Building upon this foundation, we develop a new ABS placement strategy, termed the polygonal feature-aware ABS placement algorithm (FA-poly). Our simulation results demonstrate that the proposed FA-poly significantly outperforms existing baseline methods in terms of the coverage area, as it accurately identifies channel conditions by leveraging information on generalized topographic features and obtains the coverage area based on them.
- Open Access
- 19 September 2024
- Published by Elsevier in ICT Express
- Vol. 10 (6) , 1315-1330
A review on label cleaning techniques for learning with noisy labels
- 19 September 2024
- Published by Elsevier in ICT Express
- Vol. 10 (6) , 1315-1330
Open AccessA review on label cleaning techniques for learning with noisy labels
- 10 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (16) , 27571-27583
Joint Optimization of Location, Beam, and Radio Resource for an Aerial Base Station With Controllable Directional Antennas
Recent advancements in an unmanned aerial vehicle (UAV)-enabled network have demonstrated potential of a directional antenna to enhance network performance by utilizing limited resources more efficiently. In the UAV-enabled network where a directional antenna is utilized, controlling both its beam direction and beamwidth appropriately is an important issue in order to maximize its efficiency. Existing studies on the UAV-enabled network with a directional antenna, however, have primarily concentrated on adjusting antenna’s beamwidth with a fixed beam direction for simplicity. In this article, we explore joint optimization of both beam direction and beamwidth of a UAV equipped with controllable directional antennas. To this end, we consider a UAV-enabled network where the UAV functions as an aerial base station (ABS), relaying data from a ground base station (GBS) to multiple ground users (GUs), aiming at maximizing the sum rate for all GUs by controlling the location, beam direction, and beamwidth of the UAV and resource allocation. To address this complex problem, we develop an algorithm called Joint optimization of location, beam direction, beamwidth, and resource allocation (Joint-LDWR). Through comprehensive simulations, we show the outstanding performance of Joint-LDWR, focusing on its efficiency for enhancing network performance. The results highlight a significant benefit of simultaneously controlling beam direction and beamwidth of the ABS together with its location in the UAV-enabled network.
- 10 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (16) , 27571-27583
Joint Optimization of Location, Beam, and Radio Resource for an Aerial Base Station With Controllable Directional Antennas
Recent advancements in an unmanned aerial vehicle (UAV)-enabled network have demonstrated potential of a directional antenna to enhance network performance by utilizing limited resources more efficiently. In the UAV-enabled network where a directional antenna is utilized, controlling both its beam direction and beamwidth appropriately is an important issue in order to maximize its efficiency. Existing studies on the UAV-enabled network with a directional antenna, however, have primarily concentrated on adjusting antenna’s beamwidth with a fixed beam direction for simplicity. In this article, we explore joint optimization of both beam direction and beamwidth of a UAV equipped with controllable directional antennas. To this end, we consider a UAV-enabled network where the UAV functions as an aerial base station (ABS), relaying data from a ground base station (GBS) to multiple ground users (GUs), aiming at maximizing the sum rate for all GUs by controlling the location, beam direction, and beamwidth of the UAV and resource allocation. To address this complex problem, we develop an algorithm called Joint optimization of location, beam direction, beamwidth, and resource allocation (Joint-LDWR). Through comprehensive simulations, we show the outstanding performance of Joint-LDWR, focusing on its efficiency for enhancing network performance. The results highlight a significant benefit of simultaneously controlling beam direction and beamwidth of the ABS together with its location in the UAV-enabled network.
- 24 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (15) , 26173-26190
Hybrid Offline–Online UAV Trajectory Design and Subchannel Allocation in UAV Relaying OFDMA Networks
In this paper, we study an unmanned aerial vehicle (UAV) relaying orthogonal frequency division multiple access (OFDMA) network with multiple user equipment (UE) pairs, each having explicitly given quality-of-service (QoS) requirements. Our goal is to maximize the system throughput while satisfying the QoS requirements for UE pairs, despite the air-to-ground (A2G) channel randomness. To this end, we develop a hybrid offline-online algorithm that designs the UAV’s 3D trajectory in an offline manner and then allocates sub-channels during the UAV flight in an online manner. Under the proposed algorithm, the UAV’s 3D trajectory is elaborately designed with statistical channel state information (CSI), and sub-channels are opportunistically allocated based on instantaneous CSI. In practice, the QoS requirements might not be guaranteed since perfect CSI cannot be obtained a priori. Nevertheless, the proposed algorithm significantly improves the QoS satisfaction of UE pairs to the fullest extent possible by leveraging available CSI. Through simulation, we validate the performance of the proposed algorithm in enhancing the QoS satisfaction of UE pairs and the system throughput.
- 24 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (15) , 26173-26190
Hybrid Offline–Online UAV Trajectory Design and Subchannel Allocation in UAV Relaying OFDMA Networks
In this paper, we study an unmanned aerial vehicle (UAV) relaying orthogonal frequency division multiple access (OFDMA) network with multiple user equipment (UE) pairs, each having explicitly given quality-of-service (QoS) requirements. Our goal is to maximize the system throughput while satisfying the QoS requirements for UE pairs, despite the air-to-ground (A2G) channel randomness. To this end, we develop a hybrid offline-online algorithm that designs the UAV’s 3D trajectory in an offline manner and then allocates sub-channels during the UAV flight in an online manner. Under the proposed algorithm, the UAV’s 3D trajectory is elaborately designed with statistical channel state information (CSI), and sub-channels are opportunistically allocated based on instantaneous CSI. In practice, the QoS requirements might not be guaranteed since perfect CSI cannot be obtained a priori. Nevertheless, the proposed algorithm significantly improves the QoS satisfaction of UE pairs to the fullest extent possible by leveraging available CSI. Through simulation, we validate the performance of the proposed algorithm in enhancing the QoS satisfaction of UE pairs and the system throughput.
- 23 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 22 (3) , 1868-1884
On the Use of High-Rise Topographic Features for Optimal Aerial Base Station Placement
The use of unmanned aerial vehicles as aerial base stations (ABSs) can significantly enhance the capacity and coverage of wireless systems. In this paper, the problem of optimal ABS placement is studied while exploiting high-rise topographic features to maximize wireless coverage. In contrast to prior art that relies on simplified full line-of-sight (LoS) channel models or impractical probabilistic LoS channel models, this paper presents a novel feature-aware channel model that decisively discerns whether an air-to-ground (A2G) link is in LoS or non-LoS (NLoS) based on the topographical environment data for the target area. To resolve the challenges created by the dependence between the channel gain and the topographical environment in this feature-aware channel model, the LoS and NLoS zones in the target area are analyzed from a geometrical point of view. Then, based on the analysis results, the coverage area is derived in a tractable form and then used to develop a feature-aware ABS placement algorithm, called ABS-FA, based on particle swarm optimization (PSO). The effectiveness of the proposed approach is compared with two other baseline algorithms based on the full LoS and probabilistic LoS channel models, called ABS-LoS and ABS-Prob, respectively. Simulation results show that, depending on the topographical environment, ABS-LoS may outperform ABS-Prob, or vice versa, and even both may be very limited in some cases, because the full LoS and probabilistic LoS channel models cannot properly capture whether an A2G link is in LoS or NLoS. The results also show that the proposed ABS-FA scheme always outperforms these baseline algorithms and that, for instance, it can provide approximately 25% and 50% higher coverage performance compared to ABS-Prob and ABS-LoS, respectively. These results verify that considering a feature-aware channel model can be a very effective approach for determining the ABS location.
- 23 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 22 (3) , 1868-1884
On the Use of High-Rise Topographic Features for Optimal Aerial Base Station Placement
The use of unmanned aerial vehicles as aerial base stations (ABSs) can significantly enhance the capacity and coverage of wireless systems. In this paper, the problem of optimal ABS placement is studied while exploiting high-rise topographic features to maximize wireless coverage. In contrast to prior art that relies on simplified full line-of-sight (LoS) channel models or impractical probabilistic LoS channel models, this paper presents a novel feature-aware channel model that decisively discerns whether an air-to-ground (A2G) link is in LoS or non-LoS (NLoS) based on the topographical environment data for the target area. To resolve the challenges created by the dependence between the channel gain and the topographical environment in this feature-aware channel model, the LoS and NLoS zones in the target area are analyzed from a geometrical point of view. Then, based on the analysis results, the coverage area is derived in a tractable form and then used to develop a feature-aware ABS placement algorithm, called ABS-FA, based on particle swarm optimization (PSO). The effectiveness of the proposed approach is compared with two other baseline algorithms based on the full LoS and probabilistic LoS channel models, called ABS-LoS and ABS-Prob, respectively. Simulation results show that, depending on the topographical environment, ABS-LoS may outperform ABS-Prob, or vice versa, and even both may be very limited in some cases, because the full LoS and probabilistic LoS channel models cannot properly capture whether an A2G link is in LoS or NLoS. The results also show that the proposed ABS-FA scheme always outperforms these baseline algorithms and that, for instance, it can provide approximately 25% and 50% higher coverage performance compared to ABS-Prob and ABS-LoS, respectively. These results verify that considering a feature-aware channel model can be a very effective approach for determining the ABS location.
- Open Access
- 16 July 2022
- Published by Elsevier in ICT Express
- Vol. 9 (3) , 341-355
Enabling technologies for AI empowered 6G massive radio access networks
- 16 July 2022
- Published by Elsevier in ICT Express
- Vol. 9 (3) , 341-355
Open AccessEnabling technologies for AI empowered 6G massive radio access networks
- 30 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 9 (19) , 18908-18923
Joint Antenna and Device Scheduling in Full-Duplex MIMO Wireless-Powered Communication Networks
In this paper, we study a joint antenna and internet-of-things device (ID) scheduling problem in the full-duplex (FD) multiple-input multiple-output (MIMO) wireless powered communication network (WPCN) over time-varying fading channels. We first formulate an optimization problem to maximize the average sum rate of IDs while satisfying their minimum average data rate requirements by jointly scheduling ID selection for uplink data transmission, antenna switching, and beamforming. To deal with the problem, we propose a scheduling algorithm based on Lagrangian duality and the stochastic optimization theory. The proposed scheduling algorithm necessitates solving per-time-slot problems, each of which aims at maximizing the weighted sum of the selected ID’s uplink data rate and the non-selected IDs’ harvested power from the downlink by jointly optimizing ID selection, antenna switching between uplink and downlink, and beamforming at that time slot. To solve the per-time slot problem, we develop a joint ID selection, antenna switching, and beamforming (Joint-IAB) algorithm based on the block coordinate descent (BCD) and successive convex approximation (SCA) methods. Through simulation, we demonstrate that our scheduling algorithm with the proposed Joint-IAB algorithm provides better performance than the other scheduling algorithms while well satisfying the given minimum average data rate requirements of IDs.
- 30 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 9 (19) , 18908-18923
Joint Antenna and Device Scheduling in Full-Duplex MIMO Wireless-Powered Communication Networks
In this paper, we study a joint antenna and internet-of-things device (ID) scheduling problem in the full-duplex (FD) multiple-input multiple-output (MIMO) wireless powered communication network (WPCN) over time-varying fading channels. We first formulate an optimization problem to maximize the average sum rate of IDs while satisfying their minimum average data rate requirements by jointly scheduling ID selection for uplink data transmission, antenna switching, and beamforming. To deal with the problem, we propose a scheduling algorithm based on Lagrangian duality and the stochastic optimization theory. The proposed scheduling algorithm necessitates solving per-time-slot problems, each of which aims at maximizing the weighted sum of the selected ID’s uplink data rate and the non-selected IDs’ harvested power from the downlink by jointly optimizing ID selection, antenna switching between uplink and downlink, and beamforming at that time slot. To solve the per-time slot problem, we develop a joint ID selection, antenna switching, and beamforming (Joint-IAB) algorithm based on the block coordinate descent (BCD) and successive convex approximation (SCA) methods. Through simulation, we demonstrate that our scheduling algorithm with the proposed Joint-IAB algorithm provides better performance than the other scheduling algorithms while well satisfying the given minimum average data rate requirements of IDs.