David Ivers
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David Ivers has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Darren Engwirda
T‐3 Fluid Dynamics and Solid Mechanics Group Los Alamos National Laboratory Los Alamos NM USA
2 shared publications - David Farmer
Bucknell University, Lewisburg, Pa
2 shared publications - Andrew Jackson
Institute of Geophysics, ETH Zürich, Zürich, Switzerland
1 shared publication - Collin Grant Phillips
Mathematics Learning Centre, The University of Sydney
1 shared publication D. Winch
School of Mathematics and Statistics, University of Sydney, NSW 2006, Australia
1 shared publicationDavid Galloway
The University of Sydney
1 shared publication
Latest Publications
- 30 July 2021
- Published by Australian Mathematical Publishing Association, Inc. in The ANZIAM Journal
- Vol. 63, 23-38
Slow-burning instabilities of Dufort-Frankel finite differencing
DuFort–Frankel averaging is a tactic to stabilize Richardson’s unstable three-level leapfrog timestepping scheme. By including the next time level in the right-hand-side evaluation, it is implicit, but it can be rearranged to give an explicit updating formula, thus apparently giving the best of both worlds. Textbooks prove unconditional stability for the heat equation, and extensive use on a variety of advection–diffusion equations has produced many useful results. Nonetheless, for some problems the scheme can fail in an interesting and surprising way, leading to instability at very long times. An analysis for a simple problem involving a pair of evolution equations that describe the spread of a rabies epidemic gives insight into how this occurs. An even simpler modified diffusion equation suffers from the same instability. Finally, the rabies problem is revisited and a stable method is found for a restricted range of parameter values, although no prescriptive recipe is known which selects this particular choice. doi:10.1017/S1446181121000043
- 30 July 2021
- Published by Australian Mathematical Publishing Association, Inc. in The ANZIAM Journal
- Vol. 63, 23-38
Slow-burning instabilities of Dufort-Frankel finite differencing
DuFort–Frankel averaging is a tactic to stabilize Richardson’s unstable three-level leapfrog timestepping scheme. By including the next time level in the right-hand-side evaluation, it is implicit, but it can be rearranged to give an explicit updating formula, thus apparently giving the best of both worlds. Textbooks prove unconditional stability for the heat equation, and extensive use on a variety of advection–diffusion equations has produced many useful results. Nonetheless, for some problems the scheme can fail in an interesting and surprising way, leading to instability at very long times. An analysis for a simple problem involving a pair of evolution equations that describe the spread of a rabies epidemic gives insight into how this occurs. An even simpler modified diffusion equation suffers from the same instability. Finally, the rabies problem is revisited and a stable method is found for a restricted range of parameter values, although no prescriptive recipe is known which selects this particular choice. doi:10.1017/S1446181121000043
- 1 January 2021
- Published by Cambridge University Press (CUP) in The ANZIAM Journal
- Vol. 63 (1) , 23-38
SLOW-BURNING INSTABILITIES OF DUFORT–FRANKEL FINITE DIFFERENCING
DuFort–Frankel averaging is a tactic to stabilize Richardson’s unstable three-level leapfrog timestepping scheme. By including the next time level in the right-hand-side evaluation, it is implicit, but it can be rearranged to give an explicit updating formula, thus apparently giving the best of both worlds. Textbooks prove unconditional stability for the heat equation, and extensive use on a variety of advection–diffusion equations has produced many useful results. Nonetheless, for some problems the scheme can fail in an interesting and surprising way, leading to instability at very long times. An analysis for a simple problem involving a pair of evolution equations that describe the spread of a rabies epidemic gives insight into how this occurs. An even simpler modified diffusion equation suffers from the same instability. Finally, the rabies problem is revisited and a stable method is found for a restricted range of parameter values, although no prescriptive recipe is known which selects this particular choice.
- 1 January 2021
- Published by Cambridge University Press (CUP) in The ANZIAM Journal
- Vol. 63 (1) , 23-38
SLOW-BURNING INSTABILITIES OF DUFORT–FRANKEL FINITE DIFFERENCING
DuFort–Frankel averaging is a tactic to stabilize Richardson’s unstable three-level leapfrog timestepping scheme. By including the next time level in the right-hand-side evaluation, it is implicit, but it can be rearranged to give an explicit updating formula, thus apparently giving the best of both worlds. Textbooks prove unconditional stability for the heat equation, and extensive use on a variety of advection–diffusion equations has produced many useful results. Nonetheless, for some problems the scheme can fail in an interesting and surprising way, leading to instability at very long times. An analysis for a simple problem involving a pair of evolution equations that describe the spread of a rabies epidemic gives insight into how this occurs. An even simpler modified diffusion equation suffers from the same instability. Finally, the rabies problem is revisited and a stable method is found for a restricted range of parameter values, although no prescriptive recipe is known which selects this particular choice.
- 1 March 2018
- Published by Elsevier in Physics of the Earth and Planetary Interiors
- Vol. 276, 44-59
Effects of anisotropic turbulent thermal diffusion on spherical magnetoconvection in the Earth’s core
- 1 March 2018
- Published by Elsevier in Physics of the Earth and Planetary Interiors
- Vol. 276, 44-59
Effects of anisotropic turbulent thermal diffusion on spherical magnetoconvection in the Earth’s core
- 2 November 2017
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 833, 131-163
Tilted incompressible Coriolis modes in spheroids
The incompressible flow of a uniform fluid, which fills a rigid spheroid rotating about an arbitrary axis fixed in an inertial frame, is dominated at small Rossby and Ekman numbers by the rotation through the Coriolis force. The effects of rotation on the flow can be found by treating the Coriolis force modified by a pressure gradient as a skew-symmetric bounded linear operator $\boldsymbol{{\mathcal{C}}}$ acting on smooth inviscid incompressible flows in the spheroid. It is shown that the space of incompressible polynomial flows of degree $N$ or less in the spheroid is invariant under $\boldsymbol{{\mathcal{C}}}$ for any $N$ . The skew symmetry of $\boldsymbol{{\mathcal{C}}}$ implies the Coriolis operator $\boldsymbol{{\mathcal{C}}}$ is non-defective for such flows with an orthogonal set of eigenmodes (inertial and geostrophic modes) which form a basis for the finite-dimensional space of spheroidal polynomial flows. The eigenmodes are tilted if the rotation axis is not aligned with the symmetry axis of the spheroid. The non-defective property of $\boldsymbol{{\mathcal{C}}}$ enables enumeration of the modes and proof of their completeness using the Weierstrass polynomial approximation theorem. The fundamental tool, which is required to establish invariance of spheroidal polynomial flows under $\boldsymbol{{\mathcal{C}}}$ and completeness of the Coriolis modes, is that the solution of the polynomial Poisson–Neumann problem, i.e. Poisson’s equation with Neumann boundary condition and polynomial data, in a spheroid is a polynomial. The Coriolis modes of degree one and all geostrophic modes are explicitly constructed. Only the modes of degree one have non-zero angular momentum in the boundary frame.- 2 November 2017
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 833, 131-163
Tilted incompressible Coriolis modes in spheroids
The incompressible flow of a uniform fluid, which fills a rigid spheroid rotating about an arbitrary axis fixed in an inertial frame, is dominated at small Rossby and Ekman numbers by the rotation through the Coriolis force. The effects of rotation on the flow can be found by treating the Coriolis force modified by a pressure gradient as a skew-symmetric bounded linear operator $\boldsymbol{{\mathcal{C}}}$ acting on smooth inviscid incompressible flows in the spheroid. It is shown that the space of incompressible polynomial flows of degree $N$ or less in the spheroid is invariant under $\boldsymbol{{\mathcal{C}}}$ for any $N$ . The skew symmetry of $\boldsymbol{{\mathcal{C}}}$ implies the Coriolis operator $\boldsymbol{{\mathcal{C}}}$ is non-defective for such flows with an orthogonal set of eigenmodes (inertial and geostrophic modes) which form a basis for the finite-dimensional space of spheroidal polynomial flows. The eigenmodes are tilted if the rotation axis is not aligned with the symmetry axis of the spheroid. The non-defective property of $\boldsymbol{{\mathcal{C}}}$ enables enumeration of the modes and proof of their completeness using the Weierstrass polynomial approximation theorem. The fundamental tool, which is required to establish invariance of spheroidal polynomial flows under $\boldsymbol{{\mathcal{C}}}$ and completeness of the Coriolis modes, is that the solution of the polynomial Poisson–Neumann problem, i.e. Poisson’s equation with Neumann boundary condition and polynomial data, in a spheroid is a polynomial. The Coriolis modes of degree one and all geostrophic modes are explicitly constructed. Only the modes of degree one have non-zero angular momentum in the boundary frame.- Open Access
- 4 October 2017
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 473 (2206) , 20170432
Kinematic dynamos in spheroidal geometries
The kinematic dynamo problem is solved numerically for a spheroidal conducting fluid of possibly large aspect ratio with an insulating exterior. The solution method uses solenoidal representations of the magnetic field and the velocity by spheroidal toroidal and poloidal fields in a non-orthogonal coordinate system. Scaling of coordinates and fields to a spherical geometry leads to a modified form of the kinematic dynamo problem with a geometric anisotropic diffusion and an anisotropic current-free condition in the exterior, which is solved explicitly. The scaling allows the use of well-developed spherical harmonic techniques in angle. Dynamo solutions are found for three axisymmetric flows in oblate spheroids with semi-axis ratios 1≤ a / c ≤25. For larger aspect ratios strong magnetic fields may occur in any region of the spheroid, depending on the flow, but the external fields for all three flows are weak and concentrated near the axis or periphery of the spheroid.
- 4 October 2017
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 473 (2206) , 20170432
Open AccessKinematic dynamos in spheroidal geometries
The kinematic dynamo problem is solved numerically for a spheroidal conducting fluid of possibly large aspect ratio with an insulating exterior. The solution method uses solenoidal representations of the magnetic field and the velocity by spheroidal toroidal and poloidal fields in a non-orthogonal coordinate system. Scaling of coordinates and fields to a spherical geometry leads to a modified form of the kinematic dynamo problem with a geometric anisotropic diffusion and an anisotropic current-free condition in the exterior, which is solved explicitly. The scaling allows the use of well-developed spherical harmonic techniques in angle. Dynamo solutions are found for three axisymmetric flows in oblate spheroids with semi-axis ratios 1≤ a / c ≤25. For larger aspect ratios strong magnetic fields may occur in any region of the spheroid, depending on the flow, but the external fields for all three flows are weak and concentrated near the axis or periphery of the spheroid.
- 29 May 2017
- Published by Taylor & Francis in Geophysical & Astrophysical Fluid Dynamics
- Vol. 111 (5) , 333-354
Enumeration, orthogonality and completeness of the incompressible Coriolis modes in a tri-axial ellipsoid
- 29 May 2017
- Published by Taylor & Francis in Geophysical & Astrophysical Fluid Dynamics
- Vol. 111 (5) , 333-354
Enumeration, orthogonality and completeness of the incompressible Coriolis modes in a tri-axial ellipsoid
- 4 April 2017
- Published by Australian Mathematical Publishing Association, Inc. in The ANZIAM Journal
- Vol. 58, 98-142
hp-finite element method for coupled linear systems of mixed-order differential equations with boundary layer behaviour
Hp -finite element method for coupled linear systems of mixed-order differential equations with boundary layer behaviour
- 4 April 2017
- Published by Australian Mathematical Publishing Association, Inc. in The ANZIAM Journal
- Vol. 58, 98-142
hp-finite element method for coupled linear systems of mixed-order differential equations with boundary layer behaviour
Hp -finite element method for coupled linear systems of mixed-order differential equations with boundary layer behaviour
- Open Access
Size-optimal Steiner points for Delaunay-refinement on curved surfaces
An extension of the restricted Delaunay-refinement algorithm for surface mesh generation is described, where a new point-placement scheme is introduced to improve element quality in the presence of mesh size constraints. Specifically, it is shown that the use of off-centre Steiner points, positioned on the faces of the associated Voronoi diagram, typically leads to significant improvements in the shape- and size-quality of the resulting surface tessellations. The new algorithm can be viewed as a Frontal-Delaunay approach -- a hybridisation of conventional Delaunay-refinement and advancing-front techniques in which new vertices are positioned to satisfy both element size and shape constraints. The performance of the new scheme is investigated experimentally via a series of comparative studies that contrast its performance with that of a typical Delaunay-refinement technique. It is shown that the new method inherits many of the best features of classical Delaunay-refinement and advancing-front type methods, leading to the construction of smooth, high quality surface triangulations with bounded radius-edge ratios and convergence guarantees. Experiments are conducted using a range of complex benchmarks, verifying the robustness and practical performance of the proposed scheme.
Open AccessSize-optimal Steiner points for Delaunay-refinement on curved surfaces
An extension of the restricted Delaunay-refinement algorithm for surface mesh generation is described, where a new point-placement scheme is introduced to improve element quality in the presence of mesh size constraints. Specifically, it is shown that the use of off-centre Steiner points, positioned on the faces of the associated Voronoi diagram, typically leads to significant improvements in the shape- and size-quality of the resulting surface tessellations. The new algorithm can be viewed as a Frontal-Delaunay approach -- a hybridisation of conventional Delaunay-refinement and advancing-front techniques in which new vertices are positioned to satisfy both element size and shape constraints. The performance of the new scheme is investigated experimentally via a series of comparative studies that contrast its performance with that of a typical Delaunay-refinement technique. It is shown that the new method inherits many of the best features of classical Delaunay-refinement and advancing-front type methods, leading to the construction of smooth, high quality surface triangulations with bounded radius-edge ratios and convergence guarantees. Experiments are conducted using a range of complex benchmarks, verifying the robustness and practical performance of the proposed scheme.
- 1 March 2016
- Published by Elsevier in Computer-Aided Design
- Vol. 72, 157-171
Off-centre Steiner points for Delaunay-refinement on curved surfaces
- 1 March 2016
- Published by Elsevier in Computer-Aided Design
- Vol. 72, 157-171
Off-centre Steiner points for Delaunay-refinement on curved surfaces
- Open Access
- 4 February 2015
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 766, 468-498
Enumeration, orthogonality and completeness of the incompressible Coriolis modes in a sphere
We consider incompressible flows in the rapid-rotation limit of small Rossby number and vanishing Ekman number, in a bounded volume with a rigid impenetrable rotating boundary. Physically the flows are inviscid, almost rigid rotations. We interpret the Coriolis force, modified by a pressure gradient, as a linear operator acting on smooth inviscid incompressible flows in the volume. The eigenfunctions of the Coriolis operator $\boldsymbol{{\mathcal{C}}}$ so defined are the inertial modes (including any Rossby modes) and geostrophic modes of the rotating volume. We show $\boldsymbol{{\mathcal{C}}}$ is a bounded operator and that $-\text{i}\boldsymbol{{\mathcal{C}}}$ is symmetric, so that the Coriolis modes of different frequencies are orthogonal. We prove that the space of incompressible polynomial flows of degree $N$ or less in a sphere is invariant under $\boldsymbol{{\mathcal{C}}}$ . The symmetry of $-\text{i}\boldsymbol{{\mathcal{C}}}$ thus implies the Coriolis operator is non-defective on the finite-dimensional space of spherical polynomial flows. This enables us to enumerate the Coriolis modes, and to establish their completeness using the Weierstrass polynomial approximation theorem. The fundamental tool, which is required to establish invariance of spherical polynomial flows under $\boldsymbol{{\mathcal{C}}}$ and completeness, is that the solution of the polynomial Poisson–Neumann problem, i.e. Poisson’s equation with a Neumann boundary condition and polynomial data, in a sphere is a polynomial. We also enumerate the Coriolis modes in a sphere, with careful consideration of the geostrophic modes, directly from the known analytic solutions.- 4 February 2015
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 766, 468-498
Open AccessEnumeration, orthogonality and completeness of the incompressible Coriolis modes in a sphere
We consider incompressible flows in the rapid-rotation limit of small Rossby number and vanishing Ekman number, in a bounded volume with a rigid impenetrable rotating boundary. Physically the flows are inviscid, almost rigid rotations. We interpret the Coriolis force, modified by a pressure gradient, as a linear operator acting on smooth inviscid incompressible flows in the volume. The eigenfunctions of the Coriolis operator $\boldsymbol{{\mathcal{C}}}$ so defined are the inertial modes (including any Rossby modes) and geostrophic modes of the rotating volume. We show $\boldsymbol{{\mathcal{C}}}$ is a bounded operator and that $-\text{i}\boldsymbol{{\mathcal{C}}}$ is symmetric, so that the Coriolis modes of different frequencies are orthogonal. We prove that the space of incompressible polynomial flows of degree $N$ or less in a sphere is invariant under $\boldsymbol{{\mathcal{C}}}$ . The symmetry of $-\text{i}\boldsymbol{{\mathcal{C}}}$ thus implies the Coriolis operator is non-defective on the finite-dimensional space of spherical polynomial flows. This enables us to enumerate the Coriolis modes, and to establish their completeness using the Weierstrass polynomial approximation theorem. The fundamental tool, which is required to establish invariance of spherical polynomial flows under $\boldsymbol{{\mathcal{C}}}$ and completeness, is that the solution of the polynomial Poisson–Neumann problem, i.e. Poisson’s equation with a Neumann boundary condition and polynomial data, in a sphere is a polynomial. We also enumerate the Coriolis modes in a sphere, with careful consideration of the geostrophic modes, directly from the known analytic solutions.