ESE. Charles H. Sykes

E. Charles H. Sykes

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


E. Charles H. Sykes has a total of 238 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Direct Visualization of Oxametallacycle and Ethylenedioxy Intermediates on Ag(111)

    by Elizabeth E. Happel, Toghrul Azizli, Sarah M. Stratton, Matthew M. Montemore, E. Charles H. Sykes

    The selective epoxidation of ethylene on silver remains one of the most industrially important yet mechanistically debated catalytic processes. Central to this debate is the identity of the intermediate that leads to selective epoxidation. However, unambiguous detection and characterization of chemical intermediates in situ is very challenging. Here, we take a well-defined single-crystal approach that enables direct atomic-scale imaging with scanning tunneling microscopy (STM) at cryogenic temperatures interpreted with density functional theory (DFT) and report how ethylene interacts with two different oxygen phases on Ag(111). At lower deposition temperatures, NO2 produces triangular six-oxygen-ring assemblies encircling Ag vacancies, whereas higher temperature exposures yield the well-known oxygen p(4 × 4) reconstruction, which is often attributed to nucleophilic oxygen. STM imaging reveals the formation of oxametallacycle (OMC)-like intermediates when ethylene interacts strongly with the oxygen-ring assemblies, supported by DFT calculations and simulated images. The strong interaction of ethylene in the OMC complexes leads to restructuring and the formation of chains of oxygen rings linked by ethylene. This contrasts with the weaker and less site-specific binding of ethylene to the p(4 × 4) surface. Together these model studies provide direct evidence for OMC-like intermediates often invoked in mechanistic studies of epoxidation and show they are more complex than the current one-oxygen, one-ethylene model.

  • Open Access

    Applications of Single-Atom Alloys in Thermal, Electro, and Photo Catalysis

    by Nima Rajabi, Dongbeom Kim, Yicheng Wang, Emma Hollis, Dennis Meier, Toghrul Azizli, Matthew M. Montemore, Adam Holewinski, Dayne F. Swearer, Phillip Christopher, et al.

    Single-atom alloys (SAAs) are an emerging class of heterogeneous catalysts that maximize atom efficiency by embedding isolated reactive metal atoms within a host metal surface, creating well-defined active sites. Atomic isolation imparts unique catalytic properties, including high selectivity, resistance to poisoning, coking, and sintering, and in some cases the ability to circumvent conventional scaling relationships that limit traditional catalysts. This article focuses on progress in the SAA field since our 2020 review (Chem. Rev.2020, 120, 12044−12088.), while incorporating earlier foundational studies where relevant. We first examine the fundamental principles governing SAA formation, stability, electronic structure, reactivity, and selectivity, drawing on insights from experimental single-crystal model systems and theoretical studies. We then review the application of SAAs in a wide range of industrially important reactions, including hydrogenation, dehydrogenation, selective oxidation, water–gas shift, Fischer–Tropsch synthesis, and dry reforming, among others. Beyond thermal catalysis, SAAs demonstrate great promise in electrocatalysis and plasmon-driven chemistry. Their structurally simple active sites have also enabled the rational design of novel catalysts and promoters that challenge conventional catalytic intuition. Looking ahead, recent advances in computing, including machine-learning potentials, offer the opportunity to explore vast compositional spaces and discover new alloy chemistries for challenging reactions using the SAA concept.

  • Open Access

    Trimetallic Single-Atom Alloys: Active Site Synergy or Most Reactive Atom Dominance? The Case of RhPtCu(111)

    by Vinita Lal, E. Charles H. Sykes

    Elucidating how different atomically dispersed dopant atoms interact and control reaction pathways is central to the rational design of trimetallic single-atom alloys (SAAs). Here, we investigate CH3rI decomposition on Cu(111), PtCu(111), RhCu(111), and RhPtCu(111) trimetallic SAAs in order to elucidate how coexisting dopant sites influence C–H activation, hydrogenation, and C–C coupling pathways. Temperature-programmed desorption measurements show distinct reactivity of the two bimetallic systems: PtCu(111) promotes C–C coupling to yield ethene and the methane produced originates mostly from C–H activation and subsequent hydrogenation of methyl groups. In contrast, RhCu(111) strongly suppresses C–C coupling chemistry reducing the ethene yield and produces methane mostly via hydrogenation by existing surface H. When Rh and Pt are codeposited to form a RhPtCu(111) SAA, the resulting reactivity and selectivity are not the sum of the two bimetallic SAAs. Instead, methane formation kinetics and product selectivity closely resemble bimetallic RhCu(111). Systematic variation of the Rh/(total Rh and Pt dopant) ratio shows that increasing Rh content progressively biases reactivity toward hydrogenation-dominated pathways while suppressing the C–C coupling pathway that leads to ethene formation. CO coadsorption experiments provide site-specific evidence for this behavior via selective blocking of Rh sites, which leads to a return to PtCu-like chemistry. Together, these results elucidate the reaction pathways on the RhPtCu(111) trimetallic SAA, showing that isolated Rh atoms act as dominant active sites that govern low-temperature reactivity and selectivity, thereby suppressing the C–C coupling facilitated by Pt sites at higher temperatures. This work demonstrates that RhPtCu(111) chemistry cannot be understood as linear combinations of their bimetallic counterparts, highlighting how one dopant atom can dominate the reaction pathways.

  • Open Access

    Toluene formation via acetylene-propyne cyclotrimerization on Ag(111)

    by Nipun T. S. K. Dewage, Santu Biswas, E. Charles H. Sykes, Matthew M. Montemore, Dennis Meier

    Acetylene–propyne co-assemblies on Ag(111) expand alkyne cyclotrimerization chemistry by opening a C 2 –C 3 cross-coupling pathway to toluene.

  • Open Access

    Methanol Partial Oxidation on Cu(111) and PtCu(111) Single-Atom Alloy Surfaces: Effect of Surface Oxygen Coverage on Selectivity

    by Vinita Lal, Maggie Rickman, Jean-Sabin McEwen, Iradwikanari Waluyo, E. Charles H. Sykes

    The selective oxidation of methanol to formaldehyde on Cu surfaces is an important and well-studied reaction. However, a systematic analysis of product selectivity as a function of oxygen coverage on Cu(111) and Cu-based single-atom alloys (SAAs) has not been previously reported. In this work, we present a comprehensive investigation of deuterated methanol (CD3OH) partial oxidation on Cu(111) and 1% PtCu(111) SAA surfaces as a function of preadsorbed oxygen coverage. Temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS) reveal that isolated Pt atoms inhibit the initial surface oxidation of Cu(111) under low oxygen exposures. Despite this difference in oxidation kinetics, the product selectivity remains largely unaffected: on both Cu(111) and PtCu(111), formaldehyde (CD2O) is the predominant partial oxidation product over a broad range of oxygen coverages. The selectivity toward formaldehyde peaks at intermediate oxygen coverages (∼0.3 monolayers, ML), indicating the existence of an optimal oxygen loading for partial oxidation. Notably, the similar product selectivities on Cu(111) and PtCu(111) over a range of surface oxygen coverage indicate that Pt single atoms do not significantly alter the reaction pathway or shift the optimal oxygen coverage for formaldehyde formation. Control experiments confirm that Cu(111) is unreactive toward methanol in the absence of oxygen, while PtCu(111) surfaces produce a small amount of formaldehyde even when oxygen is not preadsorbed, indicating that isolated Pt atoms facilitate O–H activation at below 150 K, leading to H2 desorption, followed by C–D activation at higher temperatures (∼350 K). Density functional theory (DFT)-based calculations show that Pt atoms increase the O2 dissociation barrier relative to Cu(111), consistent with the observed inhibition of oxidation at low exposures. Overall, this work provides the first detailed selectivity map for methanol oxidation on oxidized Cu(111) and PtCu(111) SAA surfaces. By linking classical mechanistic insights─such as methoxy- and formate-mediated pathways─with single-atom alloy catalyst design, this work demonstrates that while Pt substitution modulates the oxidation kinetics and oxygen binding, the overall selectivity toward formaldehyde is governed primarily by oxygen coverage. These findings underscore the potential of isolated dopants to tune surface oxidation behavior without compromising the intrinsic partial oxidation selectivity of copper-based catalysts.


  • Open Access

    Product-promoted acetylene cyclotrimerization to benzene on Ag(111)

    by Nipun T.S.K. Dewage, Santu Biswas, E. Charles H. Sykes, Matthew M. Montemore, Dennis Meier


  • Open Access

    Ag(111) Remains Significantly Reduced In Situ under Simulated Ethylene Epoxidation Conditions

    by Elizabeth E. Happel, Toghrul Azizli, Gloria A. Sulley, Avery S. Daniels, Cole Easton, Adrian Hunt, Phillip Christopher, Iradwikanari Waluyo, Matthew M. Montemore, E. Charles H. Sykes

    Direct ethylene epoxidation is among the highest value processes in the chemical industry, yet the reaction mechanism remains debated. A central question is whether the unpromoted Ag catalyst is metallic or oxidized under reaction conditions, as this determines the active oxidant species. Using ambient pressure X-ray photoelectron spectroscopy at chemical potentials simulating industrial conditions, we find that under oxidizing environments, nucleophilic oxygen (∼80% surface coverage) and some carbonate impurities (∼20% coverage) form on Ag(111). Upon switching to an industrially relevant 5:2 ethylene-to-oxygen ratio at 433 K, nucleophilic oxygen is consumed, leaving mostly surface carbonate and bare Ag. The Ag(111) surface maintains ∼50% exposed metallic sites under these conditions. This indicates that proposed mechanisms involving a fully oxidized surface may not represent the state of the surface under relevant reaction conditions and that bare Ag sites, which are necessary to form the oxametallacycle intermediate thought to drive selective epoxidation, are available.


  • Metal hybridization in dilute-alloy catalysts promotes sintering resistance by decreasing surface mobility

    by Jordan Finzel, Audrey Dannar, Shoutian Sun, Adam S. Hoffman, Yogita Soni, Bin Wang, Simon R. Bare, E. Charles H. Sykes, Phillip Christopher

    Dilute-metal-alloy nanoparticles exhibit enhanced catalytic performance compared with monometallic nanoparticles for many reactions. Anecdotal reports indicate that very dilute alloying can also slow the sintering rates of supported nanoparticles, although this has not been rigorously assessed and cannot be explained using bulk descriptors such as metal melting temperature. Here we utilize methanol synthesis reactivity, microscopy and in situ spectroscopy measurements to demonstrate that 1 atom% Pt addition to ~1–2-nm-diameter Cu (Pt1Cu100) nanoparticles supported on SiO2 dramatically decreases their sintering rates. Minimal sintering of Pt1Cu100 nanoparticles is observed during aging in H2 up to 700 °C versus 500 °C for Cu nanoparticles. Scanning tunnelling microscopy reveals that the addition of 0.01 monolayer of Pt to a Cu(110) surface decreases the detachment rate of undercoordinated atoms, demonstrating that dilute dopants can locally decrease the rate of the first step in nanoparticle sintering. Density functional theory calculations quantify the stabilization and predict other sinter-resistant dilute alloys. We find that the degree of host–dopant d-state hybridization correlates with decreased surface mobility, providing a mechanistic framework for designing sinter-resistant catalysts.


  • Open Access

    Low Temperature Oxygen Activation on the NiAg(100) Single-Atom Alloy Surface

    by Cole A. Easton, Sarah M. Stratton, Nima Rajabi, Nishadi Amarathunga, Matthew M. Montemore, E. Charles H. Sykes

    Silver-catalyzed ethylene epoxidation remains the only industrially viable route for ethylene oxide (EO) production. However, this process requires chlorine and other promoters to achieve a high EO selectivity while still generating substantial CO2 emissions. A recent theory-guided approach identified Ni, in single-atom alloy (SAA) form, as a new promoter of this reaction. Specifically, the addition of Ni to Ag nanoparticles supported on α-Al2O3 at a highly diluted ratio (1 Ni per 200 Ag atoms) increased catalyst selectivity to EO by ∼25%, the same increase afforded by the ubiquitous industrial promoter chlorine. To better understand the effect of Ni, we investigated the interaction of O2 with NiAg(100) SAA surfaces by using scanning tunneling microscopy (STM) and density functional theory (DFT). While only molecular O2 was present when pure Ag(100) was exposed to O2 at 78 K, a distinct NiO2 species, indicative of O2 dissociation at Ni atom sites, was identified on the NiAg(100) SAA under the same conditions. High-resolution STM imaging backed by DFT simulations elucidated the formation of an O–Ni–O species with the oxygen atoms in 4-fold hollow sites. These findings provide direct experimental evidence that Ni atoms are very effective at O2 activation, even at cryogenic temperatures. This suggests that, in addition to the known role of Ni in stabilizing the unselective nucleophilic oxygen on Ag, it could also accelerate O2 dissociation, which can be rate limiting.


  • Open Access

    Direct Observation of Hydroxyls Formed from Water and Oxygen on Ag(100)

    by Cole A. Easton, Sarah M. Stratton, Nima Rajabi, Nishadi Amarathunga, Elizabeth E. Happel, Avery S. Daniels, Adrian Hunt, Hojoon Lim, Vinita Lal, Nipun T.S.K. Dewage, et al.

    The interaction of oxygen with silver is a key descriptor of the catalytic reactivity of silver nanoparticles which are ubiquitous in large-scale partial oxidation reactions like ethylene epoxidation. Despite Ag(100) being proposed as the most selective facet, it is less studied than (111) and (110) surfaces. Using scanning tunneling microscopy and synchrotron X-ray photoelectron spectroscopy, we report that, in addition to the well-known O adatoms formed from O2 dissociation on Ag(100), hydroxyl groups (OH), at a binding energy of ∼ 531 eV, are also present. The O/OH ratio depends on exposure to water and surface temperature. These assignments are consistent with our density functional theory calculations, which indicate that the formation of two OH groups from an O atom and H2O molecule is exothermic. These results indicate that, in addition to O, OH is present even under ultrahigh vacuum conditions and therefore should be considered in proposed catalytic pathways.