RHRandall L. Headrick

Randall L. Headrick

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Randall L. Headrick has a total of 105 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Detachment-limited interlayer transport processes during SrTi O 3 pulsed laser epitaxy

    by Jeffrey G. Ulbrandt, Xiaozhi Zhang, Randall L. Headrick

    Pulsed laser epitaxial growth is characterized by high instantaneous deposition rates that lead to the nucleation of transient islands, both on surface terraces and on top of stable islands formed during previous deposition pulses. We report results from combined in x-ray reflectivity and kinetic Monte Carlo (kMC) simulations. Specular reflectivity monitors interlayer transport, while diffuse scattering reveals the evolution of in-plane length scales, both during the recovery time between individual laser pulses and over multiple deposited layers. The initial stage after each laser pulse is faster than the temporal resolution of the experiment, while subsequent recovery occurs over seconds. The results suggest that transient islands on top of stable two-dimensional islands form immediately after the deposition pulse and then ripen via detachment and diffusion, leading to the slower component. kMC simulations show that the detachment energy barrier plays a dominant role in determining the recovery time constant.

  • Open Access

    Detachment limited interlayer transport processes during SrTiO3 pulsed laser epitaxy

    by Jeffrey G. Ulbrandt, Xiaozhi Zhang, Randall L. Headrick

    Pulsed laser epitaxial growth is characterized by high instantaneous deposition rates that leads to the nucleation of transient islands, both on surface terraces, and on top of stable islands formed during previous deposition pulses. We report results from combined in-situ X-ray reflectivity and kinetic Monte Carlo (kMC) simulations. Specular reflectivity monitors interlayer transport, while diffuse scattering reveals the evolution of in-plane length scales, both during the recovery time between individual laser pulses and over multiple deposited layers. The initial stage after each laser pulse is faster than the temporal resolution of the experiment, while subsequent recovery occurs over seconds. The results suggest that transient islands on top of stable two-dimensional islands form immediately after the deposition pulse, and then ripen via detachment and diffusion, leading to the slower component. kMC simulations show that the detachment energy barrier plays a dominant role in determining the recovery time constant.

  • Local step-flow dynamics in thin film growth with desorption

    by Xiaozhi Zhang, Jeffrey G. Ulbrandt, Peco Myint, Andrei Fluerasu, Lutz Wiegart, Yugang Zhang, Christie Nelson, Karl F. Ludwig, Randall L. Headrick

    Desorption of deposited species plays a role in determining the evolution of surface morphology during crystal growth when the desorption time constant is short compared with the time to diffuse to a defect site, step edge, or kink. However, experiments to directly test the predictions of these effects are lacking. Novel techniques such as in situ coherent x-ray scattering can provide significant new information. Herein we present x-ray photon correlation spectroscopy (XPCS) measurements during diindenoperylene (DIP) vapor deposition on thermally oxidized silicon surfaces. DIP forms a nearly complete two-dimensional first layer over the range of temperatures studied (40-120(degrees)C), followed by mounded growth during subsequent deposition. Local step flow within mounds was observed, and we find that there was a terrace-length-dependent behavior of the step edge dynamics. This led to unstable growth with rapid roughening (beta > 0.5) and deviation from a symmetric error-function-like height profile. At high temperatures, the grooves between the mounds tend to close up leading to nearly flat polycrystalline films. Numerical analysis based on a (1 + 1)-dimensional model suggests that terrace-length dependent desorption of deposited ad-molecules is an essential cause of the step dynamics, and it influences the morphology evolution.


  • Open Access

    Title Coherent X-ray Studies of Surface Growth and Patte ring Processes

    by Randall L Headrick, Andrei Fluerasu, Lutz Wiegart, Yang Li, Peco Myint, Jeffrey Ulbrandt, Xiaozhi Zhang, Yugang Zhang, Karl Ludwig, Mahsa Mokhtarzadeh

    X-ray Photon Correlation Spectroscopy (XPCS) is being developed as a tool to study nanoscale dynamics of fluctuations during thin film growth and surface patterning. XPCS examines the evolution of the X-ray scattering speckle pattern in reciprocal space to reveal dynamics information not accessible through any other means. Unlike low-coherence conventional X-ray scattering, which incoherently averages over different regions of a sample, coherent X-ray scattering is sensitive to the detailed structure of a given sample at that moment in time. In thin film growth processes, heterodyning, which occurs due to coherent mixing of two scattered signals, can be used to investigate the relationship between surface growth velocity and defect propagation. And, for polycrystalline thin film growth, the spatial coherence of the X-ray beam can substitute for the missing spatial coherence of the growth process to track layered growth in detail, even in a growth regime in which there are no conventional growth oscillations of the X-ray intensity. This has opened the door for detailed dynamics studies of individual atomic layers during real-world growth and patterning, not just in perfect single-crystal growth cases, which greatly expands the applicability of in-situ X-ray scattering methods. Step-flow dynamics in mounded polycrystalline growth has been studiedmore » separately for two thin film organic semiconductors deposited by thermal deposition in a vacuum environment, C60 and diindenoperylene (DIP). Highly oriented polycrystalline thin films are readily obtained in both systems, where mounds are composed of crystalline monolayer-height steps and terraces in a so-called wedding cake morphology. The formation of mounds is understood to be due to significant Ehrlich-Schwoebel step edge barriers that inhibit molecules from hopping down from one layer to the one below. The mounds exhibit local step flow, which can be monitored using coherent X-ray scattering. This is made possible due to heterodyning between scattering from the average mounds and the moving steps, which becomes visible in XPCS analysis. The effect of desorption, i.e. re-evaporation of deposited molecules is found to be important for understanding these processes. The impact of this work is to enable testing of models of step dynamics, the shape of mounds, and merging of mounds to form continuous thin films. Highly ordered polycrystalline thin films deposited on inexpensive substrates have applications in thin film solar cells and other organic electronic devices. In a separate set of experiments, speckle analysis during self-organized ion beam nanopatterning reveals memory stretching back to the beginning of patterning in the early stages and enables measurement of the velocity of self-organized patterns across surfaces providing the possibility of stringent new tests of the theory of pattern formation and motion. « less

  • Early stage growth of amorphous thin film: Average kinetics, nanoscale dynamics, and pressure dependence

    by Chenyu Wang, Karl F. Ludwig, Christa Wagenbach, Meliha G. Rainville, Suresh Narayanan, Hua Zhou, Jeffrey G. Ulbrandt, Randall L. Headrick

    We used the coherent grazing incidence small angle x-ray scattering technique to study the average kinetics and nanoscale dynamics during early-stage a-WSi2 sputter deposition. The kinetic and dynamic properties are examined as a function of pressure, which is known to be a critical factor in determining final surface roughness. Surface growth kinetics and dynamics are characterized by time parameters extracted from the height-height structure factor and correlation functions. The roughness at a given length scale reaches a maximum before relaxing down to a steady state. The lateral length scale dependence and pressure dependence are then compared among the measured kinetics and dynamics time parameters. Surfaces grown at lower pressures are smoother, leading to longer correlation times. The time parameters to reach a dynamic steady state and a kinetic steady state show contrasting pressure dependence. A dynamic steady state is reached earlier than the kinetic steady state at high pressure. A more random deposition direction and lower kinetic energy at higher pressures can explain these phenomena, along with the hypothesis that larger nanoclusters form in vapor before arriving at the surface. A continuum model is applied to simulate the overall behavior with mixed success.


  • Dynamic processes in transient phases during self-assembly of organic semiconductor thin films

    by Jing Wan, Yang Li, Jared Benson, Richards Miller, Mikhail Zhernenkov, Guillaume Freychet, Randall L. Headrick

    Understanding and manipulating crystallization processes has been an important challenge for solution-processed organic thin films, both for fundamental studies and for fabricating thin films with near-intrinsic charge transport properties. We report an in situ X-ray scattering study of the crystallization of 2-decyl-7-phenyl-[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-C10) during its deposition from solution. At temperatures modestly below the smectic-E/crystalline phase boundary, the crystallization goes through a transient liquid crystal state before reaching the final stable crystalline phase. Significant dynamics occur in the first few seconds of the transition, which are observed through fluctuations in the X-ray scattering intensity, and are correlated with the time interval that the transient thin film coexists with the evaporating solvent. The transition to the stable crystalline phase takes minutes or even hours under these conditions, which may be a result of the asymmetry of the molecule. Transient phases are of potential interest for applications, since they can act as a route to self-assembly of organic thin films. However, our observations show that the long-lived monolayer-stacked intermediate state does not act as a template for the bilayer-stacked crystalline phase. Rather, the grain structure is replaced through nucleation, where the nucleation free-energy barrier is related to a potential barrier that prevents molecules to flip their long axis by 180°.


  • Open Access

    Enhancement of charge transfer in thermally-expanded and strain-stabilized TIPS-pentacene thin films

    by Yang Li, Jing Wan, Detlef-M. Smilgies, Richards Miller, Randall L. Headrick

    We present an extensive study of the optical and electronic properties of TIPS-pentacene thin films utilizing in situ x-ray diffraction, polarized optical spectroscopy, and ab initio density functional theory. The influence of molecular packing on the properties are reported for thin films deposited in the temperature range from 25∘C to 140∘C and for films that are strain stabilized at their as-deposited lattice spacings after cooling to room temperature. Anisotropic thermal expansion causes relative displacement of neighboring molecules while maintaining a nearly constant stacking distance. This leads to a large blueshift in the absorption spectrum as the temperature increases. The blueshift largely reverses a redshift at room temperature compared to the solution absorption spectrum. A reduction in the ratio of the first two vibronic peaks relative to the solution spectrum is also observed. This combination of electronic and vibronic effects is a signature of charge transfer excitonic coupling with a positive coupling constant JCT, which depends sensitively on the alignment of the nodes of the frontier molecular orbitals with those on neighboring molecules. These effects are also correlated with the sign and magnitude of electron and hole charge transfer integrals te and th calculated from density functional theory that provide additional evidence for charge transfer mediated coupling, as well as insight into the origin of an experimentally observed enhancement of the field-effect transistor mobility in strain-stabilized thin films. The results suggest approaches to improve carrier mobility in strained thin films and for optical monitoring of electronic changes.


  • Fast nonthermal processes in pulsed laser deposition

    by Jeffrey G. Ulbrandt, Xiaozhi Zhang, Randall L. Headrick, Rui Liu, Matthew Dawber, Kenneth Evans-Lutterodt

    Pulsed laser deposition (PLD) is widely used to grow epitaxial thin films of quantum materials. Here, we use in situ x-ray scattering to study homoepitaxy of SrTiO3 by energetic deposition (e-PLD) versus PLD thermalized by a He background gas (th-PLD). Energetic PLD suppresses the lateral growth of two-dimensional islands, which suggests that particles with kinetic energies of ∼100 eV break up smaller islands. Fast interlayer transport occurs for th-PLD as well as e-PLD, implying a process operating on submicrosecond time scales for incident particles with kinetic energies below 10 eV.


  • Open Access

    Role of ferroelectric polarization during growth of highly strained ferroelectric materials

    by Rui Liu, Jeffrey G. Ulbrandt, Hsiang-Chun Hsing, Anna Gura, Benjamin Bein, Alec Sun, Charles Pan, Giulia Bertino, Amanda Lai, Kaize Cheng, et al.

    In ferroelectric thin films and superlattices, the polarization is intricately linked to crystal structure. Here we show that it can also play an important role in the growth process, influencing growth rates, relaxation mechanisms, electrical properties and domain structures. This is studied by focusing on the properties of BaTiO3 thin films grown on very thin layers of PbTiO3 using x-ray diffraction, piezoforce microscopy, electrical characterization and rapid in-situ x-ray diffraction reciprocal space maps during the growth using synchrotron radiation. Using a simple model we show that the changes in growth are driven by the energy cost for the top material to sustain the polarization imposed upon it by the underlying layer, and these effects may be expected to occur in other multilayer systems where polarization is present during growth. This motivates the concept of polarization engineering as a complementary approach to strain engineering.


  • Open Access

    Coherent X-ray measurement of step-flow propagation during growth on polycrystalline thin film surfaces

    by Randall L. Headrick, Jeffrey G. Ulbrandt, Peco Myint, Jing Wan, Yang Li, Andrei Fluerasu, Yugang Zhang, Lutz Wiegart, Karl F. Ludwig

    The properties of artificially grown thin films are strongly affected by surface processes during growth. Coherent X-rays provide an approach to better understand such processes and fluctuations far from equilibrium. Here we report results for vacuum deposition of C60 on a graphene-coated surface investigated with X-ray Photon Correlation Spectroscopy in surface-sensitive conditions. Step-flow is observed through measurement of the step-edge velocity in the late stages of growth after crystalline mounds have formed. We show that the step-edge velocity is coupled to the terrace length, and that there is a variation in the velocity from larger step spacing at the center of crystalline mounds to closely-spaced, more slowly propagating steps at their edges. The results extend theories of surface growth, since the behavior is consistent with surface evolution driven by processes that include surface diffusion, the motion of step-edges, and attachment at step edges with significant step-edge barriers.