QZQian Zhang

Qian Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qian Zhang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance Analysis and Temperature-Corrected Core Loss Modeling of Soft Magnetic Materials for Hybrid Stepper Motors in Cryogenic Environments

    by Xiong-Jie Hu, Ye Rong, Qing-Yi Kong, Qian Zhang, Guang-Long Wang, Bo Jiang

    Hybrid stepper (HB) motors are widely used in precision actuation systems such as cryogenic refrigerator robotic arms. Under cryogenic working conditions, the core loss characteristics of magnetic materials change significantly, while conventional core loss models calibrated at room temperature can hardly provide reliable prediction accuracy. In this work, the electromagnetic properties of 35SW1900 non-oriented silicon steel were measured from 25 °C − 100 °C using a BROCKHAUS Epstein frame system. Variations in permeability, core loss and coercivity with magnetic flux density, temperature and frequency were obtained. An improved core loss model was developed by introducing a flux-dependent exponent and dual temperature correction coefficients for hysteresis and eddy current losses. Experiments place the prediction error of the proposed model within 4% under cryogenic conditions. Compared with the classical Bertotti model, the proposed model effectively reduces high-frequency deviation caused by the temperature-dependent material properties and skin effect. The core loss of silicon steel increases by 15–30% at −100 °C compared with room temperature, which is mainly attributed to the decrease in resistivity and the strengthening of domain wall pinning. This paper provides an accurate loss prediction method and design references for HB motors applied in ultralow temperature working conditions.

  • Open Access

    Influencing Factors of Failure Modes in High-Speed Permanent Magnet Motor Rotors Under Axial Constraint

    by Qing-Yi Kong, Zhong-Bao Du, Ye Rong, Li-Ying Shang, Guang-Long Wang, Qian Zhang, Lei-Zhao Geng, Sheng-Yan Zhou

    High-speed permanent magnet machines frequently employ axially constrained solid rotors. These rotors undergo complex failure due to the combined action of centrifugal loading and interference-fit contact pressure. Existing analytical models often overlook this interaction, which can lead to overestimated reliability. To address this limitation, a three-dimensional axisymmetric elastic–static model is developed. This model quantifies how rotational speed and interference fit jointly govern failure behaviour. A systematic computational framework is established to evaluate three primary failure modes: interface debonding, permanent magnet fracture, and retaining sleeve yielding. The framework explicitly accounts for axial constraint effects. Finite element simulations and prototype testing on a 3 kW, 200,000 r/min motor validate the model, confirming its accuracy in predicting failure limits. The stress distributions and dynamic responses under axial constraint are systematically analysed and compared with numerical and experimental results. Consequently, the proposed approach provides a reliable foundation for designing high-speed rotors under axial constraints.


  • Open Access

    Adaptive Graph Neural Networks with Semi-Supervised Multi-Modal Fusion for Few-Shot Steel Strip Defect Detection

    by Qing-Yi Kong, Ye Rong, Guang-Long Wang, Zi-Qi Xu, Qian Zhang, Zhan-Shuai Guan, Yu-Hui Fan

    In recent years, deep learning-based methods for surface defect detection in steel strips have advanced rapidly. Nevertheless, existing approaches still face several challenges in practical applications, such as insufficient dimensionality of feature information, inadequate representation capability for single-modal samples, poor adaptability to few-shot scenarios, and difficulties in cross-domain knowledge transfer. To overcome these limitations, this paper proposes a multi-modal fusion framework based on graph neural networks for few-shot classification and detection of surface defects. The proposed architecture consists of three core components: a multi-modal feature fusion module, a graph neural network module, and a cross-modal transfer learning module. By integrating heterogeneous data modalities—including visual images and textual descriptions—the method facilitates the construction of a more efficient and accurate defect classification and detection model. Experimental evaluations on steel strip surface defect datasets confirm the robustness and effectiveness of the proposed method under small-sample conditions. The results demonstrate that our approach provides a novel and reliable solution for automated quality inspection of surface defects in the steel industry.


  • Open Access

    Investigations on the Effect of Inclination Angle on the Aerodynamic Performance of a Two-Stage Centrifugal Compressor of a Proton Exchange Membrane Fuel Cell System

    by Wenke Wang, Dengfeng Yang, Li Guo, Rui Wu, Xiangyi Zhou, Qian Zhang, Qingyi Kong, Leon Hu

    This study examines how leading-edge inclination angles affect a two-stage centrifugal compressor’s aerodynamic performance using numerical and experimental methods. Five impellers with varied inclination configurations were designed for both stages. The results show that negative inclination improves the pressure ratio and efficiency under near-choke conditions, with greater enhancements in the low-pressure stage. Positive inclination significantly boosts the pressure ratio and efficiency under near-stall conditions, particularly in the low-pressure stage. Negative inclinations optimize blade loading and choke flow capacity, while effectively reducing incidence angle deviations induced by interstage pipeline distortion and decreasing outlet pressure fluctuation amplitude in the high-pressure stage. Positive inclinations delay flow separation, suppress tip leakage vortices, and extend the stall margin.

  • Open Access

    A super‐high‐speed PM motor drive for centrifugal air compressor used in fuel cell unmanned aerial vehicle

    by Qian Zhang, Dengfeng Yang, Qingyi Kong, Xiuxiu Sun, Zunyan Hu

    The authors show a PM motor drive with the maximum speed of 170,000 r/min for a super‐high‐speed centrifugal air compressor, which is used in high‐altitude unmanned aerial vehicle (UAV). Conventional turbochargers used in high‐altitude UAV are usually driven by the exhaust of the engine in the fuel cell system; however, the exhaust is composed of vapour and water drop, which can't drive a mechanical turbocharger effectively. In this circumstance, a super‐high‐speed electric centrifugal compressor becomes attractive to boost the air pressure and improve overall efficiency. A wide‐speed‐adaptive sliding mode observer (WSA‐SMO) is adopted to realise the super‐high‐speed sensorless control. A super‐high‐speed motor drive system is developed based on the WSA‐SMO. The current waveform at 170,000 r/min is shown to prove the steady state performance. The acceleration curves and start/stop curves are shown to demonstrate the excellent dynamic performances.


  • Fast Fault Diagnosis Method for Hall Sensors in Brushless DC Motor Drives

    by Qian Zhang, Ming Feng

    Brushless direct current (BLDC) motors with Hall sensors have been widely used in myriad industrial and commercial applications due to their simplicity and low cost. Meanwhile, the fault tolerant control (FTC) of Hall sensor drives has attracted renewed research attention. During FTC, the motor drives need to diagnose the Hall-sensor fault(s) and reconstruct the faulty signal(s). In this context, we propose an innovative fast fault diagnosis (FFD) method for analyzing different fault cases and diagnosing faulty signal(s) in the shortest possible time. Compared with established fault diagnosis (FD) methods, the FFD method does not require complicated vector-tracking observers, and it is capable of handling up to two simultaneous faults while greatly improving the diagnostic speed. Our simulation and experimental results verify the effectiveness of the proposed method and demonstrate its advantages over established methods particularly during transient operations. Due to the simplicity of the diagnostic algorithm, the proposed FFD method can be readily implemented in conventional drive systems, either through additional coding within existing controllers or as an auxiliary circuit.