Peng Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Peng Xiao has a total of 132 co-authors. Here are the top co-authors by number of shared publications:
- Tao Chen
State Key Laboratory of Advanced Marine Materials Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo China
46 shared publications Yun Liang
Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
15 shared publicationsChang Zhang
Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Zhongguan West Road 1219 Ningbo 315201 China
14 shared publicationsJincui Gu
Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies
12 shared publicationsShan Li
State Key Laboratory of Advanced Marine Materials Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
12 shared publicationsWei Zhou
State Key Laboratory of Advanced Marine Materials Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
12 shared publications
Latest Publications
- Open Access
- 28 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Asymmetric hydrophilicity-driven fast water diffusion enabling heterogeneous hygroscopic gels toward high-yield atmospheric water harvest
Hygroscopic polymeric gels hold a promising avenue for sustainable sorption-based atmospheric water harvesting (SAWH). However, conventional designs relying on homogeneous hydrophilic networks face an inherent trade-off: strong hydrogen bond-mediated water retention and osmotic pressure-driven water transport. Here, we propose a strategy to construct heterogeneous structure composed of hydrophilic pectin shell and relatively hydrophobic graphene oxide (GO) sheets core for hygroscopic polymeric organgel integrated with glycerol. The pectin shell acts as a gas–liquid conversion interface, enabling continuous and efficient water condensation. The incorporation of pristine GO interlayers significantly reduces the interaction between adsorbed water molecules and hydrophilic functional groups. This configuration enhances glycerol-enabled osmotic pumping for rapid water transport into storage and supports efficient solar-driven water release. The resulting organgel exhibits a high water uptake capacity ranging from 0.83 to 6.57 g g−1 across a broad relative humidity spectrum (30% to 90%). Under 1.0 sun illumination, it achieves a notable desorption rate of 2.06 kg m−2 h−1, contributing to a daily water yield of up to 2.86 Lwaterkgsorbent−1day−1. This heterogeneous structure challenges the conventional paradigm of maximizing hydrophilicity and supports the rational design of high-performance toward next-generation SAWH materials.
- 28 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessAsymmetric hydrophilicity-driven fast water diffusion enabling heterogeneous hygroscopic gels toward high-yield atmospheric water harvest
Hygroscopic polymeric gels hold a promising avenue for sustainable sorption-based atmospheric water harvesting (SAWH). However, conventional designs relying on homogeneous hydrophilic networks face an inherent trade-off: strong hydrogen bond-mediated water retention and osmotic pressure-driven water transport. Here, we propose a strategy to construct heterogeneous structure composed of hydrophilic pectin shell and relatively hydrophobic graphene oxide (GO) sheets core for hygroscopic polymeric organgel integrated with glycerol. The pectin shell acts as a gas–liquid conversion interface, enabling continuous and efficient water condensation. The incorporation of pristine GO interlayers significantly reduces the interaction between adsorbed water molecules and hydrophilic functional groups. This configuration enhances glycerol-enabled osmotic pumping for rapid water transport into storage and supports efficient solar-driven water release. The resulting organgel exhibits a high water uptake capacity ranging from 0.83 to 6.57 g g−1 across a broad relative humidity spectrum (30% to 90%). Under 1.0 sun illumination, it achieves a notable desorption rate of 2.06 kg m−2 h−1, contributing to a daily water yield of up to 2.86 Lwaterkgsorbent−1day−1. This heterogeneous structure challenges the conventional paradigm of maximizing hydrophilicity and supports the rational design of high-performance toward next-generation SAWH materials.
- Open Access
- 2 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8981-8990
Ice-Templated Zwitterionic Sponge Hydrogels for Stable and Efficient Solar Desalination in High-Salinity Brines
Solar-driven steam generation (SSG) offers a sustainable pathway for desalination, yet achieving temperature-regulated control over macroporous structures in salt-tolerant hydrogels remains a critical challenge. Here, we report a carbon black-coated PDMAPS sponge hydrogel (PDMAPS-CB-SH) fabricated via an ice-templated polymerization strategy, where the pore size and connectivity are tuned by regulating ice-crystal growth at different prefreezing temperatures. The optimized PDMAPS-CB-SH integrates abundant interconnected pores with the intrinsic antipolyelectrolyte effect of zwitterionic networks, enabling rapid water transport and stable swelling in brines up to 10 wt % NaCl. Upon incorporation of carbon black nanoparticles, the hydrogel evaporator achieves a high evaporation rate of 1.93 kg m-2 h-1 with an efficiency of 95.1% in seawater under 1 sun irradiation (1.0 kW m-2), and maintains stable evaporation performance under the tested high-salinity condition. Outdoor field tests further confirm its scalability, delivering 12.35 kg m-2 day-1 of freshwater with condensate quality meeting WHO drinking-water standards. This work establishes ice-templated zwitterionic sponge hydrogels as a versatile and scalable platform for efficient solar desalination, particularly under challenging high-salinity conditions.
- 2 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8981-8990
Open AccessIce-Templated Zwitterionic Sponge Hydrogels for Stable and Efficient Solar Desalination in High-Salinity Brines
Solar-driven steam generation (SSG) offers a sustainable pathway for desalination, yet achieving temperature-regulated control over macroporous structures in salt-tolerant hydrogels remains a critical challenge. Here, we report a carbon black-coated PDMAPS sponge hydrogel (PDMAPS-CB-SH) fabricated via an ice-templated polymerization strategy, where the pore size and connectivity are tuned by regulating ice-crystal growth at different prefreezing temperatures. The optimized PDMAPS-CB-SH integrates abundant interconnected pores with the intrinsic antipolyelectrolyte effect of zwitterionic networks, enabling rapid water transport and stable swelling in brines up to 10 wt % NaCl. Upon incorporation of carbon black nanoparticles, the hydrogel evaporator achieves a high evaporation rate of 1.93 kg m-2 h-1 with an efficiency of 95.1% in seawater under 1 sun irradiation (1.0 kW m-2), and maintains stable evaporation performance under the tested high-salinity condition. Outdoor field tests further confirm its scalability, delivering 12.35 kg m-2 day-1 of freshwater with condensate quality meeting WHO drinking-water standards. This work establishes ice-templated zwitterionic sponge hydrogels as a versatile and scalable platform for efficient solar desalination, particularly under challenging high-salinity conditions.
- 12 December 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (9) , e18076
Supramolecular Coupling Effect Enhanced Highly Transparent, Conductive Ionic Skin for Underwater Sensory and Interactive Robotics
Soft electronics based on polymeric gels with unique optical, mechanical and electrical properties are of crucial importance in marine resource exploration. Hydrophobic fluorinated ionogel that combines with optical transparency, flexibility and conductivity is considered a promising potential. However, current soft ionogels struggle to meet the requirements of high electrical conductivity, transparency and perception sensitivity in the aquatic environment. Herein, a novel fluorinated polymeric ionogel is developed incorporated with tert‐butyl groups and hydrophobic ionic liquid. Benefiting from the strong supramolecular dipole interaction of fluorine atoms and the hydrogen bond of tert‐butyl ester, this designed polymeric ionogel exhibits both high transparency (96.38%) and enhanced ion mobility (1.74 mS cm −1 ). To further achieve high sensitivity, a suspended 3D morphing mechanism is proposed to construct an underwater camouflage skin with ultra‐high underwater sensitivity (≈2.9 Pa), which enables capturing flow field gradients, tracking biological motion, and precisely localizing disturbance sources. As a demo, the ionogel‐based suspended underwater electronic device is integrated into a dolphin‐inspired untethered robot and further showed the closed‐loop control capability of danger perception, decision and autonomous avoidance, demonstrating significant promise in underwater bionic electronics and intelligent robotics.
- 12 December 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (9) , e18076
Supramolecular Coupling Effect Enhanced Highly Transparent, Conductive Ionic Skin for Underwater Sensory and Interactive Robotics
Soft electronics based on polymeric gels with unique optical, mechanical and electrical properties are of crucial importance in marine resource exploration. Hydrophobic fluorinated ionogel that combines with optical transparency, flexibility and conductivity is considered a promising potential. However, current soft ionogels struggle to meet the requirements of high electrical conductivity, transparency and perception sensitivity in the aquatic environment. Herein, a novel fluorinated polymeric ionogel is developed incorporated with tert‐butyl groups and hydrophobic ionic liquid. Benefiting from the strong supramolecular dipole interaction of fluorine atoms and the hydrogen bond of tert‐butyl ester, this designed polymeric ionogel exhibits both high transparency (96.38%) and enhanced ion mobility (1.74 mS cm −1 ). To further achieve high sensitivity, a suspended 3D morphing mechanism is proposed to construct an underwater camouflage skin with ultra‐high underwater sensitivity (≈2.9 Pa), which enables capturing flow field gradients, tracking biological motion, and precisely localizing disturbance sources. As a demo, the ionogel‐based suspended underwater electronic device is integrated into a dolphin‐inspired untethered robot and further showed the closed‐loop control capability of danger perception, decision and autonomous avoidance, demonstrating significant promise in underwater bionic electronics and intelligent robotics.
- Open Access
- 8 October 2025
- Published by Springer Nature in Research Square
Asymmetric Hydrophilicity-Driven Fast Water Diffusion Enabling Heterogeneous Hygroscopic Gels toward High-Yield Atmospheric Water Harvest
Hygroscopic polymeric gels hold a promising avenue for sustainable sorption-based atmospheric water harvesting (SAWH). However, conventional designs relying on homogeneous hydrophilic networks face an inherent trade-off: strong hydrogen bond-mediated water retention and osmotic pressure-driven water transport. Here, we propose a new strategy to construct heterogeneous structure composed of hydrophilic pectin shell and relatively hydrophobic graphene oxide (GO) sheets core for hygroscopic polymeric organgel integrated with glycerol. The pectin shell acts as a gas–liquid conversion interface, enabling continuous and efficient water condensation. The incorporation of pristine GO interlayers significantly reduces the interaction between adsorbed water molecules and hydrophilic functional groups. This unique configuration enhances glycerol-enabled osmotic pumping for rapid water transport into storage and supports efficient solar-driven water release. The resulting organgel exhibits a high water uptake capacity ranging from 0.83 to 6.57 g g⁻¹ across a broad relative humidity spectrum (30% to 90%). Under 1.0 sun illumination, it achieves a notable desorption rate of 2.06 kg m⁻² h⁻¹, contributing to a daily water yield of up to 2.86 L water kg sorbent ⁻¹ day⁻¹. This heterogeneous structure challenges the conventional paradigm of maximizing hydrophilicity and opens a new avenue for the rational design of high-performance toward next-generation SAWH materials.
- 8 October 2025
- Published by Springer Nature in Research Square
Open AccessAsymmetric Hydrophilicity-Driven Fast Water Diffusion Enabling Heterogeneous Hygroscopic Gels toward High-Yield Atmospheric Water Harvest
Hygroscopic polymeric gels hold a promising avenue for sustainable sorption-based atmospheric water harvesting (SAWH). However, conventional designs relying on homogeneous hydrophilic networks face an inherent trade-off: strong hydrogen bond-mediated water retention and osmotic pressure-driven water transport. Here, we propose a new strategy to construct heterogeneous structure composed of hydrophilic pectin shell and relatively hydrophobic graphene oxide (GO) sheets core for hygroscopic polymeric organgel integrated with glycerol. The pectin shell acts as a gas–liquid conversion interface, enabling continuous and efficient water condensation. The incorporation of pristine GO interlayers significantly reduces the interaction between adsorbed water molecules and hydrophilic functional groups. This unique configuration enhances glycerol-enabled osmotic pumping for rapid water transport into storage and supports efficient solar-driven water release. The resulting organgel exhibits a high water uptake capacity ranging from 0.83 to 6.57 g g⁻¹ across a broad relative humidity spectrum (30% to 90%). Under 1.0 sun illumination, it achieves a notable desorption rate of 2.06 kg m⁻² h⁻¹, contributing to a daily water yield of up to 2.86 L water kg sorbent ⁻¹ day⁻¹. This heterogeneous structure challenges the conventional paradigm of maximizing hydrophilicity and opens a new avenue for the rational design of high-performance toward next-generation SAWH materials.
- 30 September 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (44) , 15864-15873
Engineering Nanocracks Enabled Soft Micro-Wrinkles with Anomalous Strain-Resistance Effect for Underwater Electronics
Elastic wrinkle-based sensors are generally based on a typical positive gauge-factor mechanism, which inevitably suffers from issues of high power consumption and the heat of current-typed devices. Herein, an interfacial interlocked soft-hard elastomeric wrinkle is designed for stretchable negative resistance electronics. The hard CNTs/PDMS elastomeric film is cross-linked in situ on the prestretched soft elastomer surface, allowing the formation of wrinkles after strain release. The achieved wrinkle-based sensor presents the negative resistance correlation with a strain responsive range from 0% to 90% and shows a long-term electrical stability (5000 cycles) and wide operating frequency (0.01-1.0 Hz) in the water environment. As a demonstration, the sensor is further used as wearable electronics for humans and swimming robots to sensitively monitor the underwater motion behaviors. Moreover, the sensory flexible grippers are integrated to realize real-time biometric tracking and retrieval, demonstrating the potential of underwater integrated electronics with low energy consumption and accessible circuit design.
- 30 September 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (44) , 15864-15873
Engineering Nanocracks Enabled Soft Micro-Wrinkles with Anomalous Strain-Resistance Effect for Underwater Electronics
Elastic wrinkle-based sensors are generally based on a typical positive gauge-factor mechanism, which inevitably suffers from issues of high power consumption and the heat of current-typed devices. Herein, an interfacial interlocked soft-hard elastomeric wrinkle is designed for stretchable negative resistance electronics. The hard CNTs/PDMS elastomeric film is cross-linked in situ on the prestretched soft elastomer surface, allowing the formation of wrinkles after strain release. The achieved wrinkle-based sensor presents the negative resistance correlation with a strain responsive range from 0% to 90% and shows a long-term electrical stability (5000 cycles) and wide operating frequency (0.01-1.0 Hz) in the water environment. As a demonstration, the sensor is further used as wearable electronics for humans and swimming robots to sensitively monitor the underwater motion behaviors. Moreover, the sensory flexible grippers are integrated to realize real-time biometric tracking and retrieval, demonstrating the potential of underwater integrated electronics with low energy consumption and accessible circuit design.
- 3 April 2025
- Published by Springer Nature in Chinese Journal of Polymer Science
- Vol. 43 (7) , 1155-1162
Interfacial Elastic Film with Temperature Mediated-phase Transition Behavior for Tunable Suspended Sensing
- 3 April 2025
- Published by Springer Nature in Chinese Journal of Polymer Science
- Vol. 43 (7) , 1155-1162
Interfacial Elastic Film with Temperature Mediated-phase Transition Behavior for Tunable Suspended Sensing
- 10 February 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (7)
Frontispiece: Hydrogen‐Bonded Supramolecular Network Enabled Gentle Reprogramming of Liquid Crystal Elastomer toward Evolutionary Robot
- 10 February 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (7)
Frontispiece: Hydrogen‐Bonded Supramolecular Network Enabled Gentle Reprogramming of Liquid Crystal Elastomer toward Evolutionary Robot
- 10 February 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (7)
Frontispiz: Hydrogen‐Bonded Supramolecular Network Enabled Gentle Reprogramming of Liquid Crystal Elastomer toward Evolutionary Robot
- 10 February 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (7)
Frontispiz: Hydrogen‐Bonded Supramolecular Network Enabled Gentle Reprogramming of Liquid Crystal Elastomer toward Evolutionary Robot
- 7 January 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (21)
Fish‐Like Dual‐Bubbling Nanostructured Membranes‐Based Actuation System for Enhanced Underwater Sensing
Underwater sensing is crucial for sea exploration and guiding underwater vehicles. Artificial flexible or soft sensors with high sensitivity and environmental adaptability can be one promising alternative. However, the current sensors may experience sharp decline of the sensory performance attributed to the heavy water pressure. Here, inspired by the structure of swimming bladder, a fish‐like dual‐bubbling sensory membrane is developed with undiminished sensitivity by designing integrated actuation system for underwater mechanical sensing. The integrated system includes a morphing layer of soft elastomer for 3D adaptability and a sensing layer of harder elastomer embedded with carbon nanotubes (CNTs), capable of detecting fluctuations as small as 5 Pa at 8 kPa pressure and maintaining stable sensitivity up to 18 kPa. The rational design of modular‐actuation sensory system (MASS) allows the adjustment of sensing capability to handle with the higher applied water pressure. Furthermore, the designed sensor is integrated into underwater vehicle to sensitively detect the navigation behaviors and further to monitor external environmental mechanical stimuli even under 1.6 m condition. The proposed design principle is expected to provide guidance for biomimetic underwater sensory or actuating systems.
- 7 January 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (21)
Fish‐Like Dual‐Bubbling Nanostructured Membranes‐Based Actuation System for Enhanced Underwater Sensing
Underwater sensing is crucial for sea exploration and guiding underwater vehicles. Artificial flexible or soft sensors with high sensitivity and environmental adaptability can be one promising alternative. However, the current sensors may experience sharp decline of the sensory performance attributed to the heavy water pressure. Here, inspired by the structure of swimming bladder, a fish‐like dual‐bubbling sensory membrane is developed with undiminished sensitivity by designing integrated actuation system for underwater mechanical sensing. The integrated system includes a morphing layer of soft elastomer for 3D adaptability and a sensing layer of harder elastomer embedded with carbon nanotubes (CNTs), capable of detecting fluctuations as small as 5 Pa at 8 kPa pressure and maintaining stable sensitivity up to 18 kPa. The rational design of modular‐actuation sensory system (MASS) allows the adjustment of sensing capability to handle with the higher applied water pressure. Furthermore, the designed sensor is integrated into underwater vehicle to sensitively detect the navigation behaviors and further to monitor external environmental mechanical stimuli even under 1.6 m condition. The proposed design principle is expected to provide guidance for biomimetic underwater sensory or actuating systems.