Jingyao Wang
Research Subjects
Jingyao Wang has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Benjamin A. Wilhite
Texas A&M University
4 shared publications Mark R. Berglund
Synthetic Molecule Design and Development
4 shared publicationsJennifer McClary Groh
Synthetic Molecule Design and Development
3 shared publicationsM. Sam Mannan
Artie McFerrin Department of Chemical Engineering Texas A&M University College Station Texas
3 shared publications- Paridhi Agrawal
Synthetic Molecule Design and Development
3 shared publications Shekhar K. Viswanath
Synthetic Molecule Design and Development
3 shared publications
Latest Publications
- 22 October 2026
- Published by American Chemical Society (ACS) in Organic Process Research & Development
Synthesis of a Crystalline Acylated Lysine Building Block for Retatrutide Manufacture
Retatrutide contains a structurally complex lipidated side chain that presents significant challenges for efficient large-scale synthesis and isolation. We report the development of a novel and highly efficient commercial synthetic route to the lipidated side chain, designed to enable robust and sustainable manufacture at multimetric-ton scale. A central innovation of this process is the successful crystallization of an acylated lysine building block─a rare outcome for lipidated amino-acid-derived materials─which enables a chromatography-free isolation strategy and provides consistent solid-state quality. The optimized route leverages flow chemistry for key transformations in combination with crystallization-based purification, resulting in improved convergence, throughput, and operational robustness. Process mass intensity (PMI) analysis indicates a total raw material usage of 152 kg per kg of acylated lysine, with solvent consumption dominated by water and acetonitrile. Compared to a solid-phase synthetic route to the same intermediate, the liquid-phase process reduces total PMI by more than 65% and eliminates piperidine from the synthesis, representing a substantive improvement in manufacturing efficiency. Solvent usage in the final transformation was evaluated with an emphasis on process flexibility; preliminary studies demonstrate that DMSO provided comparable solubility and impurity profiles under manufacturing conditions, offering a potential path to complete elimination of DMF from the synthesis and further reduction of PMI. The process has been successfully incorporated into the retatrutide validation supply chain and is expected to support multimetric-ton-scale manufacture. The route consistently delivers ≥99% purity crystalline acylated lysine, which serves as a critical registered starting material for the commercial manufacture of retatrutide.
- 22 October 2026
- Published by American Chemical Society (ACS) in Organic Process Research & Development
Synthesis of a Crystalline Acylated Lysine Building Block for Retatrutide Manufacture
Retatrutide contains a structurally complex lipidated side chain that presents significant challenges for efficient large-scale synthesis and isolation. We report the development of a novel and highly efficient commercial synthetic route to the lipidated side chain, designed to enable robust and sustainable manufacture at multimetric-ton scale. A central innovation of this process is the successful crystallization of an acylated lysine building block─a rare outcome for lipidated amino-acid-derived materials─which enables a chromatography-free isolation strategy and provides consistent solid-state quality. The optimized route leverages flow chemistry for key transformations in combination with crystallization-based purification, resulting in improved convergence, throughput, and operational robustness. Process mass intensity (PMI) analysis indicates a total raw material usage of 152 kg per kg of acylated lysine, with solvent consumption dominated by water and acetonitrile. Compared to a solid-phase synthetic route to the same intermediate, the liquid-phase process reduces total PMI by more than 65% and eliminates piperidine from the synthesis, representing a substantive improvement in manufacturing efficiency. Solvent usage in the final transformation was evaluated with an emphasis on process flexibility; preliminary studies demonstrate that DMSO provided comparable solubility and impurity profiles under manufacturing conditions, offering a potential path to complete elimination of DMF from the synthesis and further reduction of PMI. The process has been successfully incorporated into the retatrutide validation supply chain and is expected to support multimetric-ton-scale manufacture. The route consistently delivers ≥99% purity crystalline acylated lysine, which serves as a critical registered starting material for the commercial manufacture of retatrutide.
- Open Access
- 4 May 2026
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 30 (5) , 1308-1324
Simulation-Based Optimization of the Solid-Phase Peptide Synthesis Process
- 4 May 2026
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 30 (5) , 1308-1324
Open AccessSimulation-Based Optimization of the Solid-Phase Peptide Synthesis Process
- Open Access
- 16 May 2025
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 21 (23) , 4751-4760
Gelation behavior of short protected peptides in organic medium
Protected trimer peptides containing the KYF sequence motif formed gels in dichloromethane at similar concentrations to deprotected KYF peptides in water, though distinct gel properties point to different assembly mechanisms.
- 16 May 2025
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 21 (23) , 4751-4760
Open AccessGelation behavior of short protected peptides in organic medium
Protected trimer peptides containing the KYF sequence motif formed gels in dichloromethane at similar concentrations to deprotected KYF peptides in water, though distinct gel properties point to different assembly mechanisms.
- 12 April 2024
- Published by Wiley in AIChE Journal
- Vol. 70 (8)
Quality by design of solid‐phase peptide/protein coupling reaction via mechanistic reaction kinetics modeling approach
The peptide coupling reaction is one of the most critical steps in the solid phase synthesis of therapeutic peptides/proteins. Improper reaction conditions can result in several common impurities such as single amino acid deletions, additions, N‐terminus modifications, and D‐isomers, all while potentially impacting the active pharmaceutical ingredient critical quality attributes. In this work, we developed a first‐principle mechanistic reaction kinetics model for the solid‐phase peptide/protein coupling reaction based on well‐established reaction mechanisms and experimental data from literature. Utilizing the reaction kinetics model, we present a systematic, quality by design approach for the coupling reaction control strategy. Critical process parameters are identified via univariate analysis and the design space is designated via multivariate risk assessment. The presented approach provides a novel solution for designing solid‐phase peptide/protein synthesis control strategies and identifying normal operating ranges for each process parameter, as well as the associated design space.
- 12 April 2024
- Published by Wiley in AIChE Journal
- Vol. 70 (8)
Quality by design of solid‐phase peptide/protein coupling reaction via mechanistic reaction kinetics modeling approach
The peptide coupling reaction is one of the most critical steps in the solid phase synthesis of therapeutic peptides/proteins. Improper reaction conditions can result in several common impurities such as single amino acid deletions, additions, N‐terminus modifications, and D‐isomers, all while potentially impacting the active pharmaceutical ingredient critical quality attributes. In this work, we developed a first‐principle mechanistic reaction kinetics model for the solid‐phase peptide/protein coupling reaction based on well‐established reaction mechanisms and experimental data from literature. Utilizing the reaction kinetics model, we present a systematic, quality by design approach for the coupling reaction control strategy. Critical process parameters are identified via univariate analysis and the design space is designated via multivariate risk assessment. The presented approach provides a novel solution for designing solid‐phase peptide/protein synthesis control strategies and identifying normal operating ranges for each process parameter, as well as the associated design space.
- 8 September 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (37) , 14986-14996
Development of a Mechanistic Amino Acid Activation Reaction Kinetics Model for Safe and Efficient Solid Phase Peptide Synthesis
- 8 September 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (37) , 14986-14996
Development of a Mechanistic Amino Acid Activation Reaction Kinetics Model for Safe and Efficient Solid Phase Peptide Synthesis
- Open Access
- 6 December 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (50) , 46809-46824
Mechanistic Study of Diketopiperazine Formation during Solid-Phase Peptide Synthesis of Tirzepatide
This study focused on investigating diketopiperazine (DKP) and the formation of associated double-amino-acid deletion impurities during linear solid-phase peptide synthesis (SPPS) of tirzepatide (TZP). We identified that the DKP formation primarily occurred during the Fmoc-deprotection reaction and post-coupling aging of the unstable Fmoc-Pro-Pro-Ser-resin active pharmaceutical ingredient (API) intermediate. Similar phenomena have also been observed for other TZP active pharmaceutical ingredient (API) intermediates that contain a penultimate proline amino acid, such as Fmoc-Ala-Pro-Pro-Pro-Ser-resin, Fmoc-Pro-Pro-Pro-Ser-resin, and Fmoc-Gly-Pro-Ser-Ser-Gly-Ala-Pro-Pro-Pro-Ser-resin, which are intermediates for both hybrid and linear synthesis approaches. During post-coupling aging, it is found that Fmoc deprotection can proceed in dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone (NMP), and acetonitrile (ACN) solvents without any piperidine addition. Density functional theory (DFT) calculations showed that a peptide that has a penultimate proline stabilizes the transition state through the C-H···π interaction during Fmoc decomposition, which causes those peptides to be more prone to cascade-deprotection reactions. Pseudo-reaction pathways are then proposed, and a corresponding macrokinetics model is developed to allow accurate prediction of the TZP peptide intermediate self-deprotection and DKP formation rate. Based on those studies, control strategies for minimizing DKP formation were further investigated and an alternative to Fmoc protection was identified (Bsmoc-protected amino acids), which eliminated the formation of the DKP byproducts. In addition, the use of oxyma additives and lower storage temperature was demonstrated to markedly improve the peptide intermediate stability to DKP degradation pathways.
- 6 December 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (50) , 46809-46824
Open AccessMechanistic Study of Diketopiperazine Formation during Solid-Phase Peptide Synthesis of Tirzepatide
This study focused on investigating diketopiperazine (DKP) and the formation of associated double-amino-acid deletion impurities during linear solid-phase peptide synthesis (SPPS) of tirzepatide (TZP). We identified that the DKP formation primarily occurred during the Fmoc-deprotection reaction and post-coupling aging of the unstable Fmoc-Pro-Pro-Ser-resin active pharmaceutical ingredient (API) intermediate. Similar phenomena have also been observed for other TZP active pharmaceutical ingredient (API) intermediates that contain a penultimate proline amino acid, such as Fmoc-Ala-Pro-Pro-Pro-Ser-resin, Fmoc-Pro-Pro-Pro-Ser-resin, and Fmoc-Gly-Pro-Ser-Ser-Gly-Ala-Pro-Pro-Pro-Ser-resin, which are intermediates for both hybrid and linear synthesis approaches. During post-coupling aging, it is found that Fmoc deprotection can proceed in dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone (NMP), and acetonitrile (ACN) solvents without any piperidine addition. Density functional theory (DFT) calculations showed that a peptide that has a penultimate proline stabilizes the transition state through the C-H···π interaction during Fmoc decomposition, which causes those peptides to be more prone to cascade-deprotection reactions. Pseudo-reaction pathways are then proposed, and a corresponding macrokinetics model is developed to allow accurate prediction of the TZP peptide intermediate self-deprotection and DKP formation rate. Based on those studies, control strategies for minimizing DKP formation were further investigated and an alternative to Fmoc protection was identified (Bsmoc-protected amino acids), which eliminated the formation of the DKP byproducts. In addition, the use of oxyma additives and lower storage temperature was demonstrated to markedly improve the peptide intermediate stability to DKP degradation pathways.
- 26 November 2019
- Published by Wiley in AIChE Journal
- Vol. 66 (4) , e16875
Integrated thermodynamic and kinetic model of homogeneous catalytic N‐oxidation processes
The homogeneous phosphotungstic acid catalyzed N‐oxidation of alkylpyridines by hydrogen peroxide has important applications in pharmaceutical and fine chemical industries. Current industry practice is to employ a semibatch reactor with gradual dosing of hydrogen peroxide into an alkylpyridine/catalyst solution under isothermal conditions. However, due to lack of understanding of reaction mechanism and thermodynamic behavior, this system is subject to significant risk of flammability, fires and explosions due to hydrogen peroxide decomposition. In this study, we conducted semibatch N‐oxidation process in an isothermal reaction calorimeter (RC1) over a wide range of temperature, catalyst amount and oxidizer dosing rates. Reactor pressure, reaction heat generation rate and in situ FTIR spectra of liquid phase species were recorded in real‐time during experiments, and final product was quantified using HPLC and GC–MS analytical tools. We developed an integrated thermodynamic and kinetics model of homogeneous N‐oxidation reaction based on experimental results and past literature findings. More specifically, Wilson excess Gibbs model was employed to estimate activity coefficients of highly nonideal liquid mixture. We found ideal gas law was satisfactory in calculating incondensable oxygen pressure. First principle reaction mechanism and kinetics parameters of (a) catalytic N‐oxidation reaction; (b) catalytic hydrogen peroxide decomposition reaction; (c) noncatalytic N‐oxidation reaction; (d) noncatalytic hydrogen peroxide decomposition reaction was derived based on experimental findings of this study and past literature. The proposed integrated thermodynamic model and kinetics model successfully predicted highly nonlinear reactor pressure, species concentration and reaction enthalpy generation rate profile of homogenous catalytic N‐oxidation and H2O2 decomposition reaction. The optimal reactions conditions with maximum N‐oxide product yield and minimum reactor pressure and catalyst usage was theoretically identified and further verified by experiments. The obtained model can be used for inherently safer reactor design and applied to other homogeneous tungstic acid catalytic hydrogen peroxide oxidation processes.
- 26 November 2019
- Published by Wiley in AIChE Journal
- Vol. 66 (4) , e16875
Integrated thermodynamic and kinetic model of homogeneous catalytic N‐oxidation processes
The homogeneous phosphotungstic acid catalyzed N‐oxidation of alkylpyridines by hydrogen peroxide has important applications in pharmaceutical and fine chemical industries. Current industry practice is to employ a semibatch reactor with gradual dosing of hydrogen peroxide into an alkylpyridine/catalyst solution under isothermal conditions. However, due to lack of understanding of reaction mechanism and thermodynamic behavior, this system is subject to significant risk of flammability, fires and explosions due to hydrogen peroxide decomposition. In this study, we conducted semibatch N‐oxidation process in an isothermal reaction calorimeter (RC1) over a wide range of temperature, catalyst amount and oxidizer dosing rates. Reactor pressure, reaction heat generation rate and in situ FTIR spectra of liquid phase species were recorded in real‐time during experiments, and final product was quantified using HPLC and GC–MS analytical tools. We developed an integrated thermodynamic and kinetics model of homogeneous N‐oxidation reaction based on experimental results and past literature findings. More specifically, Wilson excess Gibbs model was employed to estimate activity coefficients of highly nonideal liquid mixture. We found ideal gas law was satisfactory in calculating incondensable oxygen pressure. First principle reaction mechanism and kinetics parameters of (a) catalytic N‐oxidation reaction; (b) catalytic hydrogen peroxide decomposition reaction; (c) noncatalytic N‐oxidation reaction; (d) noncatalytic hydrogen peroxide decomposition reaction was derived based on experimental findings of this study and past literature. The proposed integrated thermodynamic model and kinetics model successfully predicted highly nonlinear reactor pressure, species concentration and reaction enthalpy generation rate profile of homogenous catalytic N‐oxidation and H2O2 decomposition reaction. The optimal reactions conditions with maximum N‐oxide product yield and minimum reactor pressure and catalyst usage was theoretically identified and further verified by experiments. The obtained model can be used for inherently safer reactor design and applied to other homogeneous tungstic acid catalytic hydrogen peroxide oxidation processes.
- 21 November 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (1) , 464-474
Development of Consequent Models for Three Categories of Fire through Artificial Neural Networks
- 21 November 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (1) , 464-474
Development of Consequent Models for Three Categories of Fire through Artificial Neural Networks
- 1 October 2019
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 378, 120585
Mechanism study of ammonium nitrate decomposition with chloride impurity using experimental and molecular simulation approach
- 1 October 2019
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 378, 120585
Mechanism study of ammonium nitrate decomposition with chloride impurity using experimental and molecular simulation approach