Sherif M. Daghash
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Sherif M. Daghash has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Mahmoud M. Reda Taha
Univ. of New Mexico
3 shared publications - Osman E. Ozbulut
Department of Civil and Environmental Engineering University of Virginia Charlottesville Virginia USA
3 shared publications - Daniel Heras Murcia
Univ. of New Mexico
2 shared publications - Eslam Soliman
Assiut University
2 shared publications - Fernando Moreu
Department of Civil, Construction and Environmental Engineering, University of New Mexico, Albuquerque, USA
2 shared publications Kenichi Soga
Chancellor’s Professor of Civil Engineering, Dept. of Civil and Environmental Engineering, Univ. of California, Berkeley, Berkeley, CA 94720-1710
2 shared publications
Latest Publications
- 13 September 2022
- Published by Morressier GmbH
CTA Session #1: Emerging Technologies for Infrastructure Resilience
The resilience of infrastructure systems to changing natural and social-technical environments is essential for life quality and public security |
- 13 September 2022
- Published by Morressier GmbH
CTA Session #1: Emerging Technologies for Infrastructure Resilience
The resilience of infrastructure systems to changing natural and social-technical environments is essential for life quality and public security |
- 1 June 2021
- Published by American Society of Civil Engineers (ASCE) in ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
- Vol. 7 (2) , 03121002
Emerging Technologies for Resilient Infrastructure: Conspectus and Roadmap
Emerging technologies (ETs) are increasingly becoming more accessible, and as they make their way into the field will be an integral part of the engineering community’s work that impacts future civil infrastructure. In the meantime, infrastructure resilience has become a recurring theme in government and industry discussions. ETs are expected to contribute to improving infrastructure resilience capacities, namely, absorptive, adaptive, and restorative. Through an extensive literature review, an in-depth conspectus of the state of the art of ETs in civil engineering is provided, leading to a vision for how these technologies impact infrastructure resilience. Three distinct disruptive technologies that can impact infrastructure resilience are demonstrated—specifically, smart materials, advanced construction technology, and advanced sensing technology. Such ETs will remarkably affect the well-known four characteristic elements of infrastructure resilience: redundancy, robustness, rapidity, and resourcefulness. These innovative technologies will warrant infrastructure to withstand or efficiently recover from multihazard disruptive events, leading to improved resilience. A roadmap to field implementation is presented considering the financial cycles necessary for ETs to make an impact on infrastructure resilience.
- 1 June 2021
- Published by American Society of Civil Engineers (ASCE) in ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
- Vol. 7 (2) , 03121002
Emerging Technologies for Resilient Infrastructure: Conspectus and Roadmap
Emerging technologies (ETs) are increasingly becoming more accessible, and as they make their way into the field will be an integral part of the engineering community’s work that impacts future civil infrastructure. In the meantime, infrastructure resilience has become a recurring theme in government and industry discussions. ETs are expected to contribute to improving infrastructure resilience capacities, namely, absorptive, adaptive, and restorative. Through an extensive literature review, an in-depth conspectus of the state of the art of ETs in civil engineering is provided, leading to a vision for how these technologies impact infrastructure resilience. Three distinct disruptive technologies that can impact infrastructure resilience are demonstrated—specifically, smart materials, advanced construction technology, and advanced sensing technology. Such ETs will remarkably affect the well-known four characteristic elements of infrastructure resilience: redundancy, robustness, rapidity, and resourcefulness. These innovative technologies will warrant infrastructure to withstand or efficiently recover from multihazard disruptive events, leading to improved resilience. A roadmap to field implementation is presented considering the financial cycles necessary for ETs to make an impact on infrastructure resilience.
- 27 June 2020
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 54 (29) , 4661-4676
Enhancing flexural capacity of RC columns through near surface mounted SMA and CFRP bars
This study explores the flexural behavior of reinforced concrete (RC) columns strengthened with near surface mounted (NSM) shape memory alloy (SMA) bars or carbon fiber reinforced polymer (CFRP) bars. Seven RC column specimens were designed and fabricated to study the influence of different variables on the flexural response of the strengthened columns. These parameters include type of NSM reinforcement (SMA bars or CFRP bars), ratio of NSM reinforcement, and effect of CFRP jacketing. The columns were tested under cyclic lateral loading with constant axial force. The flexural behavior of each specimen was examined in terms of peak load, failure load, drift ratios, displacement ductility, stiffness degradation, energy dissipation, and seismic damage index. The experimental results indicate that strengthening of RC columns with NSM SMA or CFRP bars improves the flexural behavior of the columns through increasing the lateral load capacity, reducing the stiffness degradation and increasing the cumulative energy absorption up to failure. Further enhancement in the lateral response of RC columns was obtained by combining NSM bars and CFRP jacketing as the later provides an additional confinement to the critical sections of the test specimens.
- 27 June 2020
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 54 (29) , 4661-4676
Enhancing flexural capacity of RC columns through near surface mounted SMA and CFRP bars
This study explores the flexural behavior of reinforced concrete (RC) columns strengthened with near surface mounted (NSM) shape memory alloy (SMA) bars or carbon fiber reinforced polymer (CFRP) bars. Seven RC column specimens were designed and fabricated to study the influence of different variables on the flexural response of the strengthened columns. These parameters include type of NSM reinforcement (SMA bars or CFRP bars), ratio of NSM reinforcement, and effect of CFRP jacketing. The columns were tested under cyclic lateral loading with constant axial force. The flexural behavior of each specimen was examined in terms of peak load, failure load, drift ratios, displacement ductility, stiffness degradation, energy dissipation, and seismic damage index. The experimental results indicate that strengthening of RC columns with NSM SMA or CFRP bars improves the flexural behavior of the columns through increasing the lateral load capacity, reducing the stiffness degradation and increasing the cumulative energy absorption up to failure. Further enhancement in the lateral response of RC columns was obtained by combining NSM bars and CFRP jacketing as the later provides an additional confinement to the critical sections of the test specimens.
- 1 August 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 24 (8)
Tensile Behavior and Cost-Efficiency Evaluation of ASTM A1010 Steel for Bridge Construction
This study investigates the mechanical properties of ASTM A1010 steel plates and assesses their cost efficiency through life cycle cost (LCC) analyses when used in bridge construction. First, tensile tests were conducted on specimens with different plate thicknesses and rolling direction orientations. The overall stress–strain response and tensile properties of the A1010 steel were evaluated. In addition, failure zones of fractured specimens were analyzed using a scanning electron microscope to reveal the fracture morphology and failure type. Then, to assess the competitiveness of this relatively new steel in bridge construction, a series of LCC analyses were conducted. The first analytical investigation focused on the comparative LCC performance of two case study bridges located at different atmospheric environments and constructed using either A1010 steel or painted conventional carbon steel. The second analytical study explored the major factors impacting the A1010 payoff time. Results indicated that the use of A1010 steel can be most beneficial in bridges located in aggressive environmental conditions with heavy traffic volumes.
- 1 August 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 24 (8)
Tensile Behavior and Cost-Efficiency Evaluation of ASTM A1010 Steel for Bridge Construction
This study investigates the mechanical properties of ASTM A1010 steel plates and assesses their cost efficiency through life cycle cost (LCC) analyses when used in bridge construction. First, tensile tests were conducted on specimens with different plate thicknesses and rolling direction orientations. The overall stress–strain response and tensile properties of the A1010 steel were evaluated. In addition, failure zones of fractured specimens were analyzed using a scanning electron microscope to reveal the fracture morphology and failure type. Then, to assess the competitiveness of this relatively new steel in bridge construction, a series of LCC analyses were conducted. The first analytical investigation focused on the comparative LCC performance of two case study bridges located at different atmospheric environments and constructed using either A1010 steel or painted conventional carbon steel. The second analytical study explored the major factors impacting the A1010 payoff time. Results indicated that the use of A1010 steel can be most beneficial in bridges located in aggressive environmental conditions with heavy traffic volumes.
- 3 May 2018
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 27 (6) , 065003
Tensile and fatigue behavior of polymer composites reinforced with superelastic SMA strands
This study explores the use of superelastic shape memory alloy (SMA) strands, which consist of seven individual small-diameter wires, in an epoxy matrix and characterizes the tensile and fatigue responses of the developed SMA/epoxy composites. Using a vacuum assisted hand lay-up technique, twelve SMA fiber reinforced polymer (FRP) specimens were fabricated. The developed SMA-FRP composites had a fiber volume ratio of 50%. Tensile response of SMA-FRP specimens were characterized under both monotonic loading and increasing amplitude loading and unloading cycles. The degradation in superelastic properties of the developed SMA-FRP composites during fatigue loading at different strain amplitudes was investigated. The effect of loading rate on the fatigue response of SMA-FRP composites was also explored. In addition, fractured specimens were examined using the scanning electron microscopy (SEM) technique to study the failure mechanisms of the tested specimens. A good interfacial bonding between the SMA strands and epoxy matrix was observed. The developed SMA-FRP composites exhibited good superelastic behavior at different strain amplitudes up to at least 800 cycle after which significant degradation occurred.
- 3 May 2018
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 27 (6) , 065003
Tensile and fatigue behavior of polymer composites reinforced with superelastic SMA strands
This study explores the use of superelastic shape memory alloy (SMA) strands, which consist of seven individual small-diameter wires, in an epoxy matrix and characterizes the tensile and fatigue responses of the developed SMA/epoxy composites. Using a vacuum assisted hand lay-up technique, twelve SMA fiber reinforced polymer (FRP) specimens were fabricated. The developed SMA-FRP composites had a fiber volume ratio of 50%. Tensile response of SMA-FRP specimens were characterized under both monotonic loading and increasing amplitude loading and unloading cycles. The degradation in superelastic properties of the developed SMA-FRP composites during fatigue loading at different strain amplitudes was investigated. The effect of loading rate on the fatigue response of SMA-FRP composites was also explored. In addition, fractured specimens were examined using the scanning electron microscopy (SEM) technique to study the failure mechanisms of the tested specimens. A good interfacial bonding between the SMA strands and epoxy matrix was observed. The developed SMA-FRP composites exhibited good superelastic behavior at different strain amplitudes up to at least 800 cycle after which significant degradation occurred.
- 7 April 2018
- Published by Springer Nature
- p. 659-665
Fatigue Behavior Characterization of Superelastic Shape Memory Alloy Fiber-Reinforced Polymer Composites
- 7 April 2018
- Published by Springer Nature
- p. 659-665
Fatigue Behavior Characterization of Superelastic Shape Memory Alloy Fiber-Reinforced Polymer Composites