Dawn M. Mills
Research Subjects
Dawn M. Mills has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Janet Crespo-Cajigas
TEDAC Improvised Explosive Detection and Synthesis Center, Visiting Scientist Program, FBI Laboratory, Redstone Arsenal, AL, USA
5 shared publications - Dmitry M. Kolpashchikov
Chemistry Department University of Central Florida Orlando Florida USA
2 shared publications - Karin Y. Chumbimuni-Torres
Department of Chemistry, University of Central Florida, Orlando, Fl 32816, USA
2 shared publications - Amy Dobrowansky1 shared publication
Byron Ockerman
Department of Mechanical Engineering, University of Washington, Seattle, WA, USA; Spectree Inc, Seattle, WA, USA
1 shared publicationChristopher P. Martin
1 shared publication
Latest Publications
- Open Access
- 26 May 2026
- Published by Elsevier in SSRN Electronic Journal
Assessing the Impact of Synthetic Precursors on Chemical Variability, Odor Signatures, and Canine Detectability of R-Salt Variants
Explosive detection canines (EDCs/K9s) have had a long working history, proving them to be indispensable assets in the safeguarding of national security. Nevertheless, their ability to generalize novel or improvised explosives is often challenged by the ingenuity of adversaries. In this research, multiple EDC teams were exposed for the first time to hexahydro-1,3,5-trinitroso-1,3,5-triazine (R-Salt) synthesized through different processes. All five R-Salt variants were characterized using small-scale sensitivity testing (SSST) as well as an assortment of analytical chemical instrumentation. SSST showed differences in impact and electrostatic discharge sensitivity according to sample age and preparation. The odor profile was characterized using thermal desorption coupled to gas chromatography-mass spectrometry (TD-GC-MS) and the R-Salt samples were found to contain between 4 to 7 odorants based on synthetic precursors, age, and recrystallization. EDCs imprinted on laboratory grade recrystallized R-Salt to familiarize the new odor profile on day 1, followed by a second imprinting session on day 2. After the first session of imprinting, EDC alert rate improved by 40%. Excluding the recrystallized sample used for imprinting, differences in alert rates of the RSalt variants was only 15%, highlighting the ability to generalize crude and aged samples from minimal training with the recrystallized sample. In general, this research provides the explosive forensic community with foundational chemical odorant information on R-Salt and some of its variants. Additionally, it provides evidence of EDC capabilities in the detection and generalization of R-Salt and hints towards EDC potential to quickly adapt to new and emerging explosive threats.
- 26 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAssessing the Impact of Synthetic Precursors on Chemical Variability, Odor Signatures, and Canine Detectability of R-Salt Variants
Explosive detection canines (EDCs/K9s) have had a long working history, proving them to be indispensable assets in the safeguarding of national security. Nevertheless, their ability to generalize novel or improvised explosives is often challenged by the ingenuity of adversaries. In this research, multiple EDC teams were exposed for the first time to hexahydro-1,3,5-trinitroso-1,3,5-triazine (R-Salt) synthesized through different processes. All five R-Salt variants were characterized using small-scale sensitivity testing (SSST) as well as an assortment of analytical chemical instrumentation. SSST showed differences in impact and electrostatic discharge sensitivity according to sample age and preparation. The odor profile was characterized using thermal desorption coupled to gas chromatography-mass spectrometry (TD-GC-MS) and the R-Salt samples were found to contain between 4 to 7 odorants based on synthetic precursors, age, and recrystallization. EDCs imprinted on laboratory grade recrystallized R-Salt to familiarize the new odor profile on day 1, followed by a second imprinting session on day 2. After the first session of imprinting, EDC alert rate improved by 40%. Excluding the recrystallized sample used for imprinting, differences in alert rates of the RSalt variants was only 15%, highlighting the ability to generalize crude and aged samples from minimal training with the recrystallized sample. In general, this research provides the explosive forensic community with foundational chemical odorant information on R-Salt and some of its variants. Additionally, it provides evidence of EDC capabilities in the detection and generalization of R-Salt and hints towards EDC potential to quickly adapt to new and emerging explosive threats.
- 20 April 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 18 (17) , 3490-3501
Analytical characterization of bulk R-Salt and its odor profile to establish a framework for canine detection
In early 2025, an improvised explosive known as R-Salt (hexahydro-1,3,5-trinitroso-1,3,5-triazine), was recovered from multiple improvised explosive devices in a terrorist attack in New Orleans, USA. R-Salt is not commonly included in canine training kits and its odor profile has not yet been characterized, potentially affecting its detection by explosives detector canines (EDCs) in operational settings. This study provides an in-depth characterization of the headspace composition of R-Salt using thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) to provide methodology for future canine (K9) training aid development and evaluation. This work includes thorough characterization of the crude and recrystallized bulk material as well as methodical optimization of TD parameters, flow rates, and sample collection time used for headspace analysis. The odor profile of a laboratory grade batch of R-Salt before (R-Salt-C) and after recrystallization (R-Salt-R) was characterized at room temperature for comparison and to establish a baseline odor profile. The odor profile of R-Salt-R included two compounds, R-Salt and a potential degradant, while the R-Salt-C contained an additional 7 compounds, one of which is attributed to NO2 off-gassing. In addition, the vapor pressure was determined to be 6.51 × 108 atm for R-Salt-R using thermal gravimetric analysis whereas the vapor pressure of R-Salt-C was 3.15 × 10−7 atm, indicating the presence of additional volatile contaminants. The extensive characterization provided in this study can be used to evaluate EDC detection of R-Salt and the methodology can be utilized across the explosive forensics community for R-Salt headspace characterization, evaluation and development of K9 training aids.
- 20 April 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 18 (17) , 3490-3501
Analytical characterization of bulk R-Salt and its odor profile to establish a framework for canine detection
In early 2025, an improvised explosive known as R-Salt (hexahydro-1,3,5-trinitroso-1,3,5-triazine), was recovered from multiple improvised explosive devices in a terrorist attack in New Orleans, USA. R-Salt is not commonly included in canine training kits and its odor profile has not yet been characterized, potentially affecting its detection by explosives detector canines (EDCs) in operational settings. This study provides an in-depth characterization of the headspace composition of R-Salt using thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) to provide methodology for future canine (K9) training aid development and evaluation. This work includes thorough characterization of the crude and recrystallized bulk material as well as methodical optimization of TD parameters, flow rates, and sample collection time used for headspace analysis. The odor profile of a laboratory grade batch of R-Salt before (R-Salt-C) and after recrystallization (R-Salt-R) was characterized at room temperature for comparison and to establish a baseline odor profile. The odor profile of R-Salt-R included two compounds, R-Salt and a potential degradant, while the R-Salt-C contained an additional 7 compounds, one of which is attributed to NO2 off-gassing. In addition, the vapor pressure was determined to be 6.51 × 108 atm for R-Salt-R using thermal gravimetric analysis whereas the vapor pressure of R-Salt-C was 3.15 × 10−7 atm, indicating the presence of additional volatile contaminants. The extensive characterization provided in this study can be used to evaluate EDC detection of R-Salt and the methodology can be utilized across the explosive forensics community for R-Salt headspace characterization, evaluation and development of K9 training aids.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
Uncovering variability in 2,4,6-trinitrotoluene (TNT) odor signatures through thermal desorption-GC/MS
Thermal desorption-GC/MS was used to characterize TNT odor signatures across morphologies, identifying subtle chemical differences that may influence canine detection and the representativeness of training aids.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
Uncovering variability in 2,4,6-trinitrotoluene (TNT) odor signatures through thermal desorption-GC/MS
Thermal desorption-GC/MS was used to characterize TNT odor signatures across morphologies, identifying subtle chemical differences that may influence canine detection and the representativeness of training aids.
- 24 October 2024
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 50 (1)
Headspace Characterization of Smokeless Powders Using Thermal Desorption‐Gas Chromatography‐Mass Spectrometry for Consideration in Canine Detection Training
Explosives detection canines (K9s) are routinely utilized for non‐contact detection of smokeless powders (SP) but the distinct odor(s) used by K9s for SP detection are unknown. Here, the headspace of single base (SB) and double base (DB) SPs was collected using dynamic air sampling and characterized using thermal desorption (TD) gas chromatography coupled to mass spectrometry to identify headspace analytes. TD method parameters were optimized and the headspace analysis of 26 SPs resulted in detection of 3291 compounds. Statistical analyses were utilized to narrow down significant components and principal component analysis was used to visualize potential relationships within the data. SP samples originating from the same countries clustered together and a separation in clustering for SB and DB SPs was also observed. Unique volatile chemical compounds were identified for SB and DB SPs (15 and 10 components respectively), as well as for SPs with differing origins. Shared entities between these sample groupings were also identified which may help provide a list of compounds useful for generalization of SPs regardless of manufacturing origin or SP type. Some components identified in the headspace include nitroglycerin, diphenylamine, butyl acetate, and phthalates among others. The variance in headspace data demonstrates the complexity of SP odor profiles and reiterates the need for paired K9 detection studies to understand generalization across SPs. Further implications of this research may allow for identification of additional SP training aids for inclusion in K9 kits to broaden their exposure to a diverse set of SP odor profiles.
- 24 October 2024
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 50 (1)
Headspace Characterization of Smokeless Powders Using Thermal Desorption‐Gas Chromatography‐Mass Spectrometry for Consideration in Canine Detection Training
Explosives detection canines (K9s) are routinely utilized for non‐contact detection of smokeless powders (SP) but the distinct odor(s) used by K9s for SP detection are unknown. Here, the headspace of single base (SB) and double base (DB) SPs was collected using dynamic air sampling and characterized using thermal desorption (TD) gas chromatography coupled to mass spectrometry to identify headspace analytes. TD method parameters were optimized and the headspace analysis of 26 SPs resulted in detection of 3291 compounds. Statistical analyses were utilized to narrow down significant components and principal component analysis was used to visualize potential relationships within the data. SP samples originating from the same countries clustered together and a separation in clustering for SB and DB SPs was also observed. Unique volatile chemical compounds were identified for SB and DB SPs (15 and 10 components respectively), as well as for SPs with differing origins. Shared entities between these sample groupings were also identified which may help provide a list of compounds useful for generalization of SPs regardless of manufacturing origin or SP type. Some components identified in the headspace include nitroglycerin, diphenylamine, butyl acetate, and phthalates among others. The variance in headspace data demonstrates the complexity of SP odor profiles and reiterates the need for paired K9 detection studies to understand generalization across SPs. Further implications of this research may allow for identification of additional SP training aids for inclusion in K9 kits to broaden their exposure to a diverse set of SP odor profiles.
- 1 August 2019
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 293, 11-15
Rapid detection of different DNA analytes using a single electrochemical sensor
- 1 August 2019
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 293, 11-15
Rapid detection of different DNA analytes using a single electrochemical sensor
- Open Access
- 15 November 2016
- Published by Wiley in Electroanalysis
- Vol. 29 (3) , 873-879
A Single Electrochemical Probe Used for Analysis of Multiple Nucleic Acid Sequences
Electrochemical hybridization sensors have been explored extensively for analysis of specific nucleic acids. However, commercialization of the platform is hindered by the need for attachment of separate oligonucleotide probes complementary to a RNA or DNA target to an electrode's surface. Here we demonstrate that a single probe can be used to analyze several nucleic acid targets with high selectivity and low cost. The universal electrochemical four‐way junction (4J)‐forming (UE4J) sensor consists of a universal DNA stem‐loop (USL) probe attached to the electrode's surface and two adaptor strands (m and f) which hybridize to the USL probe and the analyte to form a 4J associate. The m adaptor strand was conjugated with a methylene blue redox marker for signal ON sensing and monitored using square wave voltammetry. We demonstrated that a single sensor can be used for detection of several different DNA/RNA sequences and can be regenerated in 30 seconds by a simple water rinse. The UE4J sensor enables a high selectivity by recognition of a single base substitution, even at room temperature. The UE4J sensor opens a venue for a re‐useable universal platform that can be adopted at low cost for the analysis of DNA or RNA targets.
- 15 November 2016
- Published by Wiley in Electroanalysis
- Vol. 29 (3) , 873-879
Open AccessA Single Electrochemical Probe Used for Analysis of Multiple Nucleic Acid Sequences
Electrochemical hybridization sensors have been explored extensively for analysis of specific nucleic acids. However, commercialization of the platform is hindered by the need for attachment of separate oligonucleotide probes complementary to a RNA or DNA target to an electrode's surface. Here we demonstrate that a single probe can be used to analyze several nucleic acid targets with high selectivity and low cost. The universal electrochemical four‐way junction (4J)‐forming (UE4J) sensor consists of a universal DNA stem‐loop (USL) probe attached to the electrode's surface and two adaptor strands (m and f) which hybridize to the USL probe and the analyte to form a 4J associate. The m adaptor strand was conjugated with a methylene blue redox marker for signal ON sensing and monitored using square wave voltammetry. We demonstrated that a single sensor can be used for detection of several different DNA/RNA sequences and can be regenerated in 30 seconds by a simple water rinse. The UE4J sensor enables a high selectivity by recognition of a single base substitution, even at room temperature. The UE4J sensor opens a venue for a re‐useable universal platform that can be adopted at low cost for the analysis of DNA or RNA targets.