Oleh Kuzmin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Oleh Kuzmin has a total of 152 co-authors. Here are the top co-authors by number of shared publications:
- Anton Kuzmin
Individual entrepreneur Kuzmin Anton Olehovych
8 shared publications - Dmytro Kuzmin
Limited Liability Company Retrostyle Games (Retrostyle Games LLC)
4 shared publications - Mariia Omelchenko
National University of Food Technologies
4 shared publications - Oktyabrina Chemakina
State University «Kyiv Aviation Institute», Ukraine
4 shared publications V Topolnik
4 shared publications- Igor Dudarev
Луцький національний технічний університет
3 shared publications
Latest Publications
- Open Access
- 18 June 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (3(89)) , 69-76
Development of a vegetable oil blend with improved oxidative stability for emulsion semi-finished products
For the technology of emulsion semi-finished products, it is relevant to develop a lipid base that combines oxidative stability, an acceptable fatty acid composition, and a controlled aromatic profile. The main problem is the insufficient substantiation of the composition of such lipid bases, which should simultaneously ensure a balanced fatty acid profile, oxidative stability, and aroma stability during storage. Therefore, a comparative assessment of vegetable oil blends with different component ratios was carried out to determine their influence on the fatty acid composition, aromatic characteristics, and technological potential of the lipid phase. Determination of the composition of fatty acids was carried out by gas chromatography with a flame ionization detector (GC-FID) after preliminary preparation of fatty acid methyl esters. Volatile components were determined by gas chromatography with a flame ionization detector (GC-FID). Chromatogram analysis and processing were performed using NetChrom v2.1 software. The quality of blends was assessed by the ratio of ω – 6/ω – 3 fatty acids, oxidative stability indicators and characteristics of the aromatic profile. It was found that variation in blend composition makes it possible to obtain oil blends with specified parameters and characteristics, ensuring oxidative stability of the studied systems, nutritional value and functionality. The functionality of blends is manifested in the ability to ensure stable operation in emulsions, sauces and semi-finished products without intensive oxidation and with preservation of quality characteristics during storage. The developed blend can be used as a lipid base for emulsion semi-finished products, sauces and functional dressings, which allows optimizing product formulations and improving their quality in HoReCa establishments.
- 18 June 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (3(89)) , 69-76
Open AccessDevelopment of a vegetable oil blend with improved oxidative stability for emulsion semi-finished products
For the technology of emulsion semi-finished products, it is relevant to develop a lipid base that combines oxidative stability, an acceptable fatty acid composition, and a controlled aromatic profile. The main problem is the insufficient substantiation of the composition of such lipid bases, which should simultaneously ensure a balanced fatty acid profile, oxidative stability, and aroma stability during storage. Therefore, a comparative assessment of vegetable oil blends with different component ratios was carried out to determine their influence on the fatty acid composition, aromatic characteristics, and technological potential of the lipid phase. Determination of the composition of fatty acids was carried out by gas chromatography with a flame ionization detector (GC-FID) after preliminary preparation of fatty acid methyl esters. Volatile components were determined by gas chromatography with a flame ionization detector (GC-FID). Chromatogram analysis and processing were performed using NetChrom v2.1 software. The quality of blends was assessed by the ratio of ω – 6/ω – 3 fatty acids, oxidative stability indicators and characteristics of the aromatic profile. It was found that variation in blend composition makes it possible to obtain oil blends with specified parameters and characteristics, ensuring oxidative stability of the studied systems, nutritional value and functionality. The functionality of blends is manifested in the ability to ensure stable operation in emulsions, sauces and semi-finished products without intensive oxidation and with preservation of quality characteristics during storage. The developed blend can be used as a lipid base for emulsion semi-finished products, sauces and functional dressings, which allows optimizing product formulations and improving their quality in HoReCa establishments.
- 23 March 2026
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 20 (1) , 108-122
INNOVATIVE TECHNOLOGY FOR HIGH–QUALITY DIETARY COLD SWEET DISHES USING PLANT POWDERS FROM BEETROOT AND BLUEBERRIES
The article presents the results of a study devoted to the development of innovative technology for cold sweet dishes of increased quality for dietary and functional purposes, using the example of whipped creams with the addition of beetroot and blueberry powders as natural sources of biologically active compounds. The relevance of the work is determined by the need to expand the range of dietary products with increased nutritional and biological value, as well as the search for effective technological solutions that ensure stable rheological and high sensory properties of finished products in accordance with modern concepts of nutrition, preventive nutrition, and functional product design. The research was carried out taking into account the philosophy of technologies as a system of conceptual principles aimed at minimizing intensive technological influences, preserving the natural biological value of raw materials, forming a stable product structure without heat treatment, and harmonizing technological, nutrition, and sensory characteristics. This approach made it possible to consider technology not only as a set of operations, but as a holistic model for creating a functional food product. The aim of the study is to scientifically substantiate the recipe composition and technological parameters for the preparation of cold sweet dietary dishes – whipped creams using beetroot and blueberry powders as sources of natural functional ingredients. The object of the study is the technology of cold sweet dishes, in particular whipped creams, and the subject is the influence of plant powders and gelling agents on the formation of their structural–mechanical, physicochemical, and organoleptic characteristics. In the course of experimental research, the recipe composition was optimized based on Greek yogurt with a fat content of 3%, cream 33%, beetroot and blueberry powders, agar–agar, and highly esterified pectin using natural sweeteners. It was established that the rational ratio of active components is 6.81 g of vegetable powders and 4.64 g of gelling agents per 100 g of recipe mass, which ensures the achievement of the maximum integral quality index. Physical and chemical evaluation confirmed the formation of an optimal product consistency with a viscosity of up to 680 mPa·s, minimal syneresis, stable acidity, and shape retention for 48 hours at a temperature of 4 ± 2 °C. The results of infrared spectroscopy and thermogravimetric analysis indicate the formation of a heat–resistant protein–polysaccharide structural matrix that is stable at temperatures up to 120 °C. Chemical analysis has shown a significant enrichment of the product with dietary fiber, minerals, and vitamins, as well as a high content of anthocyanins and betaines, which determines the pronounced antioxidant potential and functional activity of the developed creams. The proposed technology can be recommended for implementation in restaurants and food industry enterprises focused on the production of dietary and functional products.
- 23 March 2026
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 20 (1) , 108-122
INNOVATIVE TECHNOLOGY FOR HIGH–QUALITY DIETARY COLD SWEET DISHES USING PLANT POWDERS FROM BEETROOT AND BLUEBERRIES
The article presents the results of a study devoted to the development of innovative technology for cold sweet dishes of increased quality for dietary and functional purposes, using the example of whipped creams with the addition of beetroot and blueberry powders as natural sources of biologically active compounds. The relevance of the work is determined by the need to expand the range of dietary products with increased nutritional and biological value, as well as the search for effective technological solutions that ensure stable rheological and high sensory properties of finished products in accordance with modern concepts of nutrition, preventive nutrition, and functional product design. The research was carried out taking into account the philosophy of technologies as a system of conceptual principles aimed at minimizing intensive technological influences, preserving the natural biological value of raw materials, forming a stable product structure without heat treatment, and harmonizing technological, nutrition, and sensory characteristics. This approach made it possible to consider technology not only as a set of operations, but as a holistic model for creating a functional food product. The aim of the study is to scientifically substantiate the recipe composition and technological parameters for the preparation of cold sweet dietary dishes – whipped creams using beetroot and blueberry powders as sources of natural functional ingredients. The object of the study is the technology of cold sweet dishes, in particular whipped creams, and the subject is the influence of plant powders and gelling agents on the formation of their structural–mechanical, physicochemical, and organoleptic characteristics. In the course of experimental research, the recipe composition was optimized based on Greek yogurt with a fat content of 3%, cream 33%, beetroot and blueberry powders, agar–agar, and highly esterified pectin using natural sweeteners. It was established that the rational ratio of active components is 6.81 g of vegetable powders and 4.64 g of gelling agents per 100 g of recipe mass, which ensures the achievement of the maximum integral quality index. Physical and chemical evaluation confirmed the formation of an optimal product consistency with a viscosity of up to 680 mPa·s, minimal syneresis, stable acidity, and shape retention for 48 hours at a temperature of 4 ± 2 °C. The results of infrared spectroscopy and thermogravimetric analysis indicate the formation of a heat–resistant protein–polysaccharide structural matrix that is stable at temperatures up to 120 °C. Chemical analysis has shown a significant enrichment of the product with dietary fiber, minerals, and vitamins, as well as a high content of anthocyanins and betaines, which determines the pronounced antioxidant potential and functional activity of the developed creams. The proposed technology can be recommended for implementation in restaurants and food industry enterprises focused on the production of dietary and functional products.
- 25 December 2025
- Published by Private Company Technology Center
- p. 42-74
Integration of inclusive engineering principles and craft technologies in the design of food service facilities in the context of post-war reconstruction of Ukraine: building materials, architectural solutions, quality, safety
The study is devoted to the integration of inclusive engineering principles and craft technologies in the design of food service facilities within the context of Ukraine’s post-war reconstruction. The primary focus is on the environmentally responsible selection of building materials (wood, clay, straw, hemp fiber, arbolite concrete) and architectural solutions that address the needs of vulnerable population groups, including veterans, persons with disabilities, and internally displaced persons. Emphasis is placed on ensuring quality standards, safety (notably HACCP), and hygiene, which are critically important in the food service sector. In the context of the war in Ukraine, which has caused extensive infrastructure destruction, there is a need to create a new architectural and construction culture oriented toward sustainable development, social inclusivity, and the preservation of local identity. The proposed approach combines circular economy principles (material reuse), craft technologies (hand labor, local resources), and inclusive design (barrier-free access, adaptive furniture, sensory comfort). This contributes to the economic recovery of communities, reduces environmental impact, and creates culturally significant spaces. The objective is to develop a methodology for integrating inclusive engineering and craft technologies to create accessible, safe, and authentic food service facilities. The study includes an analysis of the thermophysical characteristics of building materials such as density, heat capacity, thermal conductivity, and vapor permeability, along with a comparison of their technological complexity, environmental friendliness, and economic feasibility. Results demonstrate the advantages of materials with high heat capacity (reed panels, arbolite) for energy efficiency and low thermal conductivity (cellulose insulation, foam glass) for thermal insulation. Architectural solutions encompass ramps, wide corridors, zoning, anti-slip surfaces, and hygienic materials compliant with HACCP standards. This approach ensures the creation of sustainable, safe, and socially inclusive spaces that support the local economy, reduce ecological footprint, and contribute to the preservation of Ukrainian identity. It is recommended to adapt regulatory frameworks and educational programs to promote these principles.
- 25 December 2025
- Published by Private Company Technology Center
- p. 42-74
Integration of inclusive engineering principles and craft technologies in the design of food service facilities in the context of post-war reconstruction of Ukraine: building materials, architectural solutions, quality, safety
The study is devoted to the integration of inclusive engineering principles and craft technologies in the design of food service facilities within the context of Ukraine’s post-war reconstruction. The primary focus is on the environmentally responsible selection of building materials (wood, clay, straw, hemp fiber, arbolite concrete) and architectural solutions that address the needs of vulnerable population groups, including veterans, persons with disabilities, and internally displaced persons. Emphasis is placed on ensuring quality standards, safety (notably HACCP), and hygiene, which are critically important in the food service sector. In the context of the war in Ukraine, which has caused extensive infrastructure destruction, there is a need to create a new architectural and construction culture oriented toward sustainable development, social inclusivity, and the preservation of local identity. The proposed approach combines circular economy principles (material reuse), craft technologies (hand labor, local resources), and inclusive design (barrier-free access, adaptive furniture, sensory comfort). This contributes to the economic recovery of communities, reduces environmental impact, and creates culturally significant spaces. The objective is to develop a methodology for integrating inclusive engineering and craft technologies to create accessible, safe, and authentic food service facilities. The study includes an analysis of the thermophysical characteristics of building materials such as density, heat capacity, thermal conductivity, and vapor permeability, along with a comparison of their technological complexity, environmental friendliness, and economic feasibility. Results demonstrate the advantages of materials with high heat capacity (reed panels, arbolite) for energy efficiency and low thermal conductivity (cellulose insulation, foam glass) for thermal insulation. Architectural solutions encompass ramps, wide corridors, zoning, anti-slip surfaces, and hygienic materials compliant with HACCP standards. This approach ensures the creation of sustainable, safe, and socially inclusive spaces that support the local economy, reduce ecological footprint, and contribute to the preservation of Ukrainian identity. It is recommended to adapt regulatory frameworks and educational programs to promote these principles.
- Open Access
- 22 August 2025
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 55,p. 379-389
DESIGNING A CAFÉ-CONFECTIONERY: A COMPREHENSIVE APPROACH TO QUALITY, SAFETY, AND INCLUSIVITY
The article explores a comprehensive approach to the design of a café-confectionery facility, with an emphasis on ensuring food quality, safety, and inclusivity through the implementation of the HACCP system. It examines the key stages of technological process organization, identification of critical control points, and the application of sanitary and hygienic standards along with digital technologies to enhance control efficiency. Special attention is given to the zoning of production areas and the optimization of raw material, semi-finished product, and final product flows to minimize the risks of microbiological, chemical, and physical contamination. The creation of an accessible, barrier-free environment for all users is also prioritized. The proposed practical recommendations contribute to the development of a safe, high-quality, and inclusive environment within café-confectionery establishments.
- 22 August 2025
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 55,p. 379-389
Open AccessDESIGNING A CAFÉ-CONFECTIONERY: A COMPREHENSIVE APPROACH TO QUALITY, SAFETY, AND INCLUSIVITY
The article explores a comprehensive approach to the design of a café-confectionery facility, with an emphasis on ensuring food quality, safety, and inclusivity through the implementation of the HACCP system. It examines the key stages of technological process organization, identification of critical control points, and the application of sanitary and hygienic standards along with digital technologies to enhance control efficiency. Special attention is given to the zoning of production areas and the optimization of raw material, semi-finished product, and final product flows to minimize the risks of microbiological, chemical, and physical contamination. The creation of an accessible, barrier-free environment for all users is also prioritized. The proposed practical recommendations contribute to the development of a safe, high-quality, and inclusive environment within café-confectionery establishments.
- Open Access
- 31 July 2025
- Published by OU Scientific Route
Innovative approaches in food processing and sustainability
The collective monograph presents a comprehensive overview of modern trends and scientific advancements aimed at improving food quality, nutritional value, and environmental impact. The chapters explore diverse topics such as the development of gluten-free granola technologies for the restaurant sector, optimization strategies for candied cherry production using frozen raw materials, and the enhancement of vegetable oil blends and ice cream with plant-based components. Emphasis is placed on functional foods - buckwheat, oats, and whey derivatives - for health-conscious consumers, as well as innovations in animal feed to improve meat quality. The book also addresses sustainable practices including the use of food industry by-products, like asparagus waste and sea buckthorn pectin, and post-harvest antioxidant protection techniques. These interdisciplinary contributions reflect cutting-edge solutions for advancing food processing technologies with a strong focus on sustainability and functional benefits.--------------------------------------------------------------------------------------------------------------How to Cite: Priss, O., Serdiuk, M., Kolisnychenko, T., Bandura, V., Sefikhanova, K., Opanashcuk, Y. et al.; Priss, O. (Ed.) (2025). Innovative approaches in food processing and sustainability. Tallinn: Scientific Route OÜ. doi: https://doi.org/10.21303/978-9908-9706-2-2--------------------------------------------------------------------------------------------------------------Introduction. Innovations for the sustainable development of food systemsOlesia Priss Chapter 1. Improvement of gluten-free granola production technology in the restaurant segmentMarina Serdiuk, Tetiana Kolisnychenko, Valentyna Bandura, Kateryna Sefikhanova, Yurii Opanashcuk, Tetyana Semko Chapter 2. A multi-criteria strategy for assessing the quality of frozen raw cherry fruitsIryna Ivanova, Marina Serdiuk, Tetiana Tymoshchuk, Antonina Drobitko, Olga Pyurko, Yana Mulienok Chapter 3. Сhemical composition and properties of vegetable oil blendsIgor Dudarev, Oksana Tsisar, Volodymyr Say Chapter 4. Development and characterisation of ice cream containing vegetable oilsSvitlana Panasyuk, Iryna Taraymovich, Tamara Sydoruk Chapter 5. Compositional analysis and potential of buckwheat and oats as functional food ingredientsVasylyna Shemet, Iryna Moroz, Olha Hulai Chapter 6. Justification and development of biotechnology of cooked sausage products for health purposesLarysa Bal-Prylypko, Nataliia Slobodianiuk, Maksym Ryabovol, Nataliia Holembovska, Ihor Ustymenko, Mykola Nikolayenko, Halyna Tolok, Maryna Nazarenko Chapter 7. Optimization of goose meat quality through oat and alfalfa-based feed additivesDaniil Maiboroda, Olena Danchenko, Viktoriya Gryshchenko Chapter 8. Reducing losses during storage of fruit vegetables: regulation of postharvest metabolismOlesia Priss, Liudmyla Kiurcheva, Serhii HoliachukChapter 9. Essential oils in pig diet as a means of improving pork qualityТaras Prudyus, Oleg Vishchur, Mykola Danchenko Chapter 10. Changes in quality parameters of sweet peppers during low-temperature storage after freezingNadiia Zahorko, Igor Dudarev, Valentyna Tkachuk Chapter 11. Sunflower lecithin as an alternative to soy lecithin: technological approaches to improving its rheological, sensory and functional propertiesAnastasiia Demydova, Svitlana Panasyuk, Yurii Hunko Chapter 12. Use of asparagus waste to fortify bakery productsOlesia Priss, Кateryna Kostetska, Pavlo Bulhakov Chapter 13. Innovative potential of sea buckthorn pectin in providing textural properties to food and pharmaceutical productsOlha Sumska, Olena Ishchenko, Kostiantyn Yermakov, Kateryna Smykalo, Igor Chernyshov, Oleksandr KarpenkoChapter 14. Innovative technology for high-quality functional alcoholic beverages based on tea-aromatic raw materials with antioxidant activityOleh Kuzmin, Oleksandra Niemirich, Olena Podobii, Liudmyla Mamchenko, Andrii Murzin, Mariia Omelchenko, Dmytro Kuzmin, Anton KuzminChapter 15. Technology improvement of cooked sausage products with the addition of non-traditional raw materialsNataliia Holembovska, Nataliia Slobodianiuk, Valentyna Israelian, Vladyslav Dorozhko, Sergii Gryshchenko, Mykola Gruntkovskyi, Vita Mykhalska, Petro Drozd
- 31 July 2025
- Published by OU Scientific Route
Open AccessInnovative approaches in food processing and sustainability
The collective monograph presents a comprehensive overview of modern trends and scientific advancements aimed at improving food quality, nutritional value, and environmental impact. The chapters explore diverse topics such as the development of gluten-free granola technologies for the restaurant sector, optimization strategies for candied cherry production using frozen raw materials, and the enhancement of vegetable oil blends and ice cream with plant-based components. Emphasis is placed on functional foods - buckwheat, oats, and whey derivatives - for health-conscious consumers, as well as innovations in animal feed to improve meat quality. The book also addresses sustainable practices including the use of food industry by-products, like asparagus waste and sea buckthorn pectin, and post-harvest antioxidant protection techniques. These interdisciplinary contributions reflect cutting-edge solutions for advancing food processing technologies with a strong focus on sustainability and functional benefits.--------------------------------------------------------------------------------------------------------------How to Cite: Priss, O., Serdiuk, M., Kolisnychenko, T., Bandura, V., Sefikhanova, K., Opanashcuk, Y. et al.; Priss, O. (Ed.) (2025). Innovative approaches in food processing and sustainability. Tallinn: Scientific Route OÜ. doi: https://doi.org/10.21303/978-9908-9706-2-2--------------------------------------------------------------------------------------------------------------Introduction. Innovations for the sustainable development of food systemsOlesia Priss Chapter 1. Improvement of gluten-free granola production technology in the restaurant segmentMarina Serdiuk, Tetiana Kolisnychenko, Valentyna Bandura, Kateryna Sefikhanova, Yurii Opanashcuk, Tetyana Semko Chapter 2. A multi-criteria strategy for assessing the quality of frozen raw cherry fruitsIryna Ivanova, Marina Serdiuk, Tetiana Tymoshchuk, Antonina Drobitko, Olga Pyurko, Yana Mulienok Chapter 3. Сhemical composition and properties of vegetable oil blendsIgor Dudarev, Oksana Tsisar, Volodymyr Say Chapter 4. Development and characterisation of ice cream containing vegetable oilsSvitlana Panasyuk, Iryna Taraymovich, Tamara Sydoruk Chapter 5. Compositional analysis and potential of buckwheat and oats as functional food ingredientsVasylyna Shemet, Iryna Moroz, Olha Hulai Chapter 6. Justification and development of biotechnology of cooked sausage products for health purposesLarysa Bal-Prylypko, Nataliia Slobodianiuk, Maksym Ryabovol, Nataliia Holembovska, Ihor Ustymenko, Mykola Nikolayenko, Halyna Tolok, Maryna Nazarenko Chapter 7. Optimization of goose meat quality through oat and alfalfa-based feed additivesDaniil Maiboroda, Olena Danchenko, Viktoriya Gryshchenko Chapter 8. Reducing losses during storage of fruit vegetables: regulation of postharvest metabolismOlesia Priss, Liudmyla Kiurcheva, Serhii HoliachukChapter 9. Essential oils in pig diet as a means of improving pork qualityТaras Prudyus, Oleg Vishchur, Mykola Danchenko Chapter 10. Changes in quality parameters of sweet peppers during low-temperature storage after freezingNadiia Zahorko, Igor Dudarev, Valentyna Tkachuk Chapter 11. Sunflower lecithin as an alternative to soy lecithin: technological approaches to improving its rheological, sensory and functional propertiesAnastasiia Demydova, Svitlana Panasyuk, Yurii Hunko Chapter 12. Use of asparagus waste to fortify bakery productsOlesia Priss, Кateryna Kostetska, Pavlo Bulhakov Chapter 13. Innovative potential of sea buckthorn pectin in providing textural properties to food and pharmaceutical productsOlha Sumska, Olena Ishchenko, Kostiantyn Yermakov, Kateryna Smykalo, Igor Chernyshov, Oleksandr KarpenkoChapter 14. Innovative technology for high-quality functional alcoholic beverages based on tea-aromatic raw materials with antioxidant activityOleh Kuzmin, Oleksandra Niemirich, Olena Podobii, Liudmyla Mamchenko, Andrii Murzin, Mariia Omelchenko, Dmytro Kuzmin, Anton KuzminChapter 15. Technology improvement of cooked sausage products with the addition of non-traditional raw materialsNataliia Holembovska, Nataliia Slobodianiuk, Valentyna Israelian, Vladyslav Dorozhko, Sergii Gryshchenko, Mykola Gruntkovskyi, Vita Mykhalska, Petro Drozd
- 23 June 2025
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 19 (2) , 79-89
RESEARCH ON THE SENSORY AND ANTIOXIDANT PROPERTIES OF FUNCTIONAL PASTES BASED ON SHIITAKE MUSHROOMS
The study is devoted to the assessment of the effect of heat treatment regimes of shiitake mushrooms (Lentinula edodes) on the antioxidant activity of functional pastes with improved organoleptic characteristics.. Low-temperature sous-vide technology (t=50–90 °C, τ=10–60 min) and high-temperature autoclaving technology (t=125 °C, τ=45 min) were used for heat treatment. Antioxidant activity was determined by redoxometry and pH-metry methods with the calculation of reducing capacity hydroalcoholic infusions (REinf) and plant materials (REplant). The results demonstrated that an increase in temperature during the heat treatment of shiitake mushrooms promotes the activation of individual redox components, confirming an increase in the redox potential of Ehact (from 7.0 mV in control to 15.50 mV in autoclaving), however, an increase in temperature leads to the degradation of thermolabile bioactive compounds, reducing the overall redox efficiency. The highest antioxidant activity (REinf=186.98 mV, REplant=141.34 mV) was recorded during sous-vide processing at 50 °C for 60 minutes, which ensured stable pH (7.31) and preservation of taste properties. Autoclaving lowered the pH to 7.18, causing intense Maillard reactions and degradation of antioxidants. Sensory assessment on a 5-point scale (appearance, color, texture, taste, aftertaste, smell) confirmed the superiority of low-temperature modes: sous-vide samples had a light beige color, plastic consistency, pronounced mushroom flavor, and umami and nutty descriptors (4–5 points), while autoclaved samples were characterized by darkening, liver flavor, and less plasticity (3–4 points). It has been established that low-temperature heat treatment of shiitake mushroom pastes contributes to the preservation of an authentic sensory profile and an increase in antioxidant activity, which justifies the use of shiitake mushrooms to create innovative functional products in the restaurant industry and specialized diets.
- 23 June 2025
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 19 (2) , 79-89
RESEARCH ON THE SENSORY AND ANTIOXIDANT PROPERTIES OF FUNCTIONAL PASTES BASED ON SHIITAKE MUSHROOMS
The study is devoted to the assessment of the effect of heat treatment regimes of shiitake mushrooms (Lentinula edodes) on the antioxidant activity of functional pastes with improved organoleptic characteristics.. Low-temperature sous-vide technology (t=50–90 °C, τ=10–60 min) and high-temperature autoclaving technology (t=125 °C, τ=45 min) were used for heat treatment. Antioxidant activity was determined by redoxometry and pH-metry methods with the calculation of reducing capacity hydroalcoholic infusions (REinf) and plant materials (REplant). The results demonstrated that an increase in temperature during the heat treatment of shiitake mushrooms promotes the activation of individual redox components, confirming an increase in the redox potential of Ehact (from 7.0 mV in control to 15.50 mV in autoclaving), however, an increase in temperature leads to the degradation of thermolabile bioactive compounds, reducing the overall redox efficiency. The highest antioxidant activity (REinf=186.98 mV, REplant=141.34 mV) was recorded during sous-vide processing at 50 °C for 60 minutes, which ensured stable pH (7.31) and preservation of taste properties. Autoclaving lowered the pH to 7.18, causing intense Maillard reactions and degradation of antioxidants. Sensory assessment on a 5-point scale (appearance, color, texture, taste, aftertaste, smell) confirmed the superiority of low-temperature modes: sous-vide samples had a light beige color, plastic consistency, pronounced mushroom flavor, and umami and nutty descriptors (4–5 points), while autoclaved samples were characterized by darkening, liver flavor, and less plasticity (3–4 points). It has been established that low-temperature heat treatment of shiitake mushroom pastes contributes to the preservation of an authentic sensory profile and an increase in antioxidant activity, which justifies the use of shiitake mushrooms to create innovative functional products in the restaurant industry and specialized diets.
- Open Access
- 1 January 2025
- Published by OU Scientific Route
- p. 285-317
Innovative technology for high-quality functional alcoholic beverages based on tea-aromatic raw materials with antioxidant activity
Innovative approaches in food processing and sustainability The feasibility of using water-alcohol infusions of tea-herbal raw materials (Ilex paraguariensis, Camellia sinensis, Citrus spp.) for the production of alcoholic beverages has been substantiated. These components are characterized by high bioactivity, the stability of polyphenolic compounds in alcoholic media, appealing aroma, and favorable sensory properties, making them an effective basis for innovative functional beverages. The antioxidant activity of the obtained infusions was determined. The highest reducing capacity (REₚₗₐₙₜ) was observed in citrus peel infusions (up to 204.00 mV for orange peel), green tea (56.06 mV), and yerba mate (59.02 mV). This indicates the presence of a significant amount of bioactive compounds that retain antioxidant potential even in ethanol-containing systems. The potential for modifying infusions based on tea-aromatic compositions within alcoholic beverage technology has been explored. It was established that the optimal mass ratio of components ω = 20/75/5% (mate/tea/citrus peel) provides a balanced flavor, reduces the bitterness of mate, enhances the aroma with fresh fruity notes, and increases the overall sensory evaluation score (up to 9.82 points – for mate/green tea/orange peel). Sensory evaluation of the infusions confirmed their suitability for commercial development. All infusions received high sensory scores ranging from 9.63 to 9.82 on a 10-point scale, indicating strong consumer appeal and potential for implementation in the restaurant industry for the creation of new-generation functional alcoholic beverages. Optimized formulations for functional alcoholic beverages enriched with antioxidant tea-herbal infusions have been developed. The formulation includes: 38.49% of the infusion (mate/tea/citrus peel in a 20/75/5% ratio), 7.54% brandy, 53.08% sugar syrup, as well as vanillin, citric acid, caramel coloring, and ethanol/water to adjust the alcohol content to 20% vol. This ensures a functional and sensory balance while maintaining market viability. The integration of antioxidant-rich infusions based on Ilex paraguariensis, Camellia sinensis, and Citrus spp. into alcoholic beverage technology offers new opportunities for the restaurant industry to expand product offerings, enhance functional value, and cater to the growing demand for health-oriented and innovative beverages.
- 1 January 2025
- Published by OU Scientific Route
- p. 285-317
Open AccessInnovative technology for high-quality functional alcoholic beverages based on tea-aromatic raw materials with antioxidant activity
Innovative approaches in food processing and sustainability The feasibility of using water-alcohol infusions of tea-herbal raw materials (Ilex paraguariensis, Camellia sinensis, Citrus spp.) for the production of alcoholic beverages has been substantiated. These components are characterized by high bioactivity, the stability of polyphenolic compounds in alcoholic media, appealing aroma, and favorable sensory properties, making them an effective basis for innovative functional beverages. The antioxidant activity of the obtained infusions was determined. The highest reducing capacity (REₚₗₐₙₜ) was observed in citrus peel infusions (up to 204.00 mV for orange peel), green tea (56.06 mV), and yerba mate (59.02 mV). This indicates the presence of a significant amount of bioactive compounds that retain antioxidant potential even in ethanol-containing systems. The potential for modifying infusions based on tea-aromatic compositions within alcoholic beverage technology has been explored. It was established that the optimal mass ratio of components ω = 20/75/5% (mate/tea/citrus peel) provides a balanced flavor, reduces the bitterness of mate, enhances the aroma with fresh fruity notes, and increases the overall sensory evaluation score (up to 9.82 points – for mate/green tea/orange peel). Sensory evaluation of the infusions confirmed their suitability for commercial development. All infusions received high sensory scores ranging from 9.63 to 9.82 on a 10-point scale, indicating strong consumer appeal and potential for implementation in the restaurant industry for the creation of new-generation functional alcoholic beverages. Optimized formulations for functional alcoholic beverages enriched with antioxidant tea-herbal infusions have been developed. The formulation includes: 38.49% of the infusion (mate/tea/citrus peel in a 20/75/5% ratio), 7.54% brandy, 53.08% sugar syrup, as well as vanillin, citric acid, caramel coloring, and ethanol/water to adjust the alcohol content to 20% vol. This ensures a functional and sensory balance while maintaining market viability. The integration of antioxidant-rich infusions based on Ilex paraguariensis, Camellia sinensis, and Citrus spp. into alcoholic beverage technology offers new opportunities for the restaurant industry to expand product offerings, enhance functional value, and cater to the growing demand for health-oriented and innovative beverages.
- 1 January 2025
- Published by Publishing House Helvetica (Publications) in Theory and practice of design
- No. 35,p. 83-95
VISUAL-COMMUNICATION SYSTEMS IN AN INCLUSIVE URBAN ENVIRONMENT
The article is devoted to the study of functional and architectural-design aspects of visual communication systems in an inclusive urban environment. The authors identify challenges in integrating various technologies, such as digital information systems and adaptive navigation elements, to create an accessible and comfortable space for all user groups. The aim of the article is to explore the functional and architectural-design components of inclusive visual communication systems in urban settings that ensure accessibility and convenience for all social groups, including people with disabilities. Methodology: A combination of theoretical analysis of architectural and social principles, methods for studying contemporary trends in inclusive design, and practical approaches to adapting visual communication for diverse users. Scientific novelty: The article proposes a new approach to designing visual communication systems that integrate the needs of all users, ensuring both functional and aesthetic accessibility in urban environments. Key design principles are identified, as well as the significance of aesthetic and stylistic characteristics of visual communications and their role in harmonizing the architectural environment. Results: To create inclusive urban spaces, it is necessary to integrate adaptive technologies into the design of architectural elements that meet the needs of people with disabilities. The conclusions emphasize the importance of a comprehensive approach to the design of inclusive urban spaces, incorporating not only physical accessibility but also the psychological and social aspects of human interaction with the environment through visual and communication systems.Practical relevance. The developed recommendations and methodological guidelines can be directly used by urban planners, architects, and designers in the renovation of street and public spaces, contributing to improved accessibility, safety, and comfort for all user groups, particularly those with limited mobility. Стаття присвячена дослідженню функціональних і архітектурно-дизайнерських аспектів проєктування візуально-комунікативних систем в інклюзивному міському середовищі. Автори виділяють проблеми інтеграції різних технологій, таких як цифрові інформаційні системи та адаптивні елементи навігації, для створення доступного і комфортного простору для всіх груп користувачів. Метою статті є дослідження функціональних та архітектурно-дизайнерських аспектів проєктування інклюзивних візуально-комунікативних систем у міському середовищі, які забезпечують доступність та зручність для всіх соціальних груп, зокрема людей з обмеженими можливостями. Методологія: поєднання теоретичного аналізу архітектурних і соціальних принципів, методів вивчення сучасних тенденцій у проєктуванні інклюзивних середовищ, практичних напрямів адаптації візуальних комунікацій для різних користувачів. Результати: для створення інклюзивних міських просторів необхідно інтегрувати адаптивні технології в дизайн архітектурних елементів, що відповідають потребам людей з обмеженими можливостями. У висновках підкреслюється важливість комплексного підходу до проєктування інклюзивних міських просторів, що включає не лише фізичну доступність, але й психологічні та соціальні аспекти взаємодії людини з середовищем через візуальні та комунікаційні системи. Наукова новизна: пропозиція нового підходу до проєктування візуально-комунікативних систем, які інтегрують потреби всіх користувачів, що дозволяє забезпечити функціональну і естетичну доступність міського середовища. Визначено: ключові принципи проєктування, значення естетичних і стилістичних характеристик візуальних комунікацій та їх роль у гармонізації архітектурного середовища. Практична значущість. Розроблені рекомендації та методичні вказівки можуть бути безпосередньо використані міськими планувальниками, архітекторами та дизайнерами при оновленні вуличного та громадського простору, сприяючи підвищенню рівня доступності, безпеки та комфорту для всіх категорій користувачів, зокрема маломобільних груп населення.
- 1 January 2025
- Published by Publishing House Helvetica (Publications) in Theory and practice of design
- No. 35,p. 83-95
VISUAL-COMMUNICATION SYSTEMS IN AN INCLUSIVE URBAN ENVIRONMENT
The article is devoted to the study of functional and architectural-design aspects of visual communication systems in an inclusive urban environment. The authors identify challenges in integrating various technologies, such as digital information systems and adaptive navigation elements, to create an accessible and comfortable space for all user groups. The aim of the article is to explore the functional and architectural-design components of inclusive visual communication systems in urban settings that ensure accessibility and convenience for all social groups, including people with disabilities. Methodology: A combination of theoretical analysis of architectural and social principles, methods for studying contemporary trends in inclusive design, and practical approaches to adapting visual communication for diverse users. Scientific novelty: The article proposes a new approach to designing visual communication systems that integrate the needs of all users, ensuring both functional and aesthetic accessibility in urban environments. Key design principles are identified, as well as the significance of aesthetic and stylistic characteristics of visual communications and their role in harmonizing the architectural environment. Results: To create inclusive urban spaces, it is necessary to integrate adaptive technologies into the design of architectural elements that meet the needs of people with disabilities. The conclusions emphasize the importance of a comprehensive approach to the design of inclusive urban spaces, incorporating not only physical accessibility but also the psychological and social aspects of human interaction with the environment through visual and communication systems.Practical relevance. The developed recommendations and methodological guidelines can be directly used by urban planners, architects, and designers in the renovation of street and public spaces, contributing to improved accessibility, safety, and comfort for all user groups, particularly those with limited mobility. Стаття присвячена дослідженню функціональних і архітектурно-дизайнерських аспектів проєктування візуально-комунікативних систем в інклюзивному міському середовищі. Автори виділяють проблеми інтеграції різних технологій, таких як цифрові інформаційні системи та адаптивні елементи навігації, для створення доступного і комфортного простору для всіх груп користувачів. Метою статті є дослідження функціональних та архітектурно-дизайнерських аспектів проєктування інклюзивних візуально-комунікативних систем у міському середовищі, які забезпечують доступність та зручність для всіх соціальних груп, зокрема людей з обмеженими можливостями. Методологія: поєднання теоретичного аналізу архітектурних і соціальних принципів, методів вивчення сучасних тенденцій у проєктуванні інклюзивних середовищ, практичних напрямів адаптації візуальних комунікацій для різних користувачів. Результати: для створення інклюзивних міських просторів необхідно інтегрувати адаптивні технології в дизайн архітектурних елементів, що відповідають потребам людей з обмеженими можливостями. У висновках підкреслюється важливість комплексного підходу до проєктування інклюзивних міських просторів, що включає не лише фізичну доступність, але й психологічні та соціальні аспекти взаємодії людини з середовищем через візуальні та комунікаційні системи. Наукова новизна: пропозиція нового підходу до проєктування візуально-комунікативних систем, які інтегрують потреби всіх користувачів, що дозволяє забезпечити функціональну і естетичну доступність міського середовища. Визначено: ключові принципи проєктування, значення естетичних і стилістичних характеристик візуальних комунікацій та їх роль у гармонізації архітектурного середовища. Практична значущість. Розроблені рекомендації та методичні вказівки можуть бути безпосередньо використані міськими планувальниками, архітекторами та дизайнерами при оновленні вуличного та громадського простору, сприяючи підвищенню рівня доступності, безпеки та комфорту для всіх категорій користувачів, зокрема маломобільних груп населення.
- Open Access
- 30 September 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in European Science
- No. sge32-02,p. 89-96
OPTIMIZATION OF THE RECIPE FOR MAKING GALETTES IMPROVED WITH INNOVATIVE INGREDIENTS
This article examines the process of optimizing the recipe for making galettes enriched with innovative ingredients. The expediency of optimization was discussed. The criterion of optimality and controlling factors, the change of which will have an impact
- 30 September 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in European Science
- No. sge32-02,p. 89-96
Open AccessOPTIMIZATION OF THE RECIPE FOR MAKING GALETTES IMPROVED WITH INNOVATIVE INGREDIENTS
This article examines the process of optimizing the recipe for making galettes enriched with innovative ingredients. The expediency of optimization was discussed. The criterion of optimality and controlling factors, the change of which will have an impact
- Open Access
- 30 September 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in European Science
- No. sge32-02,p. 79-88
FOOD SAFETY AND QUALITY MANAGEMENT SYSTEM IN THE RESTAURANT INDUSTRY
This paper develops a food safety and quality management system for a food service establishment in accordance with Ukrainian legislation. The system covers all stages of liquid broth production and includes hazard analysis, the development of a HACCP pla
- 30 September 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in European Science
- No. sge32-02,p. 79-88
Open AccessFOOD SAFETY AND QUALITY MANAGEMENT SYSTEM IN THE RESTAURANT INDUSTRY
This paper develops a food safety and quality management system for a food service establishment in accordance with Ukrainian legislation. The system covers all stages of liquid broth production and includes hazard analysis, the development of a HACCP pla