John S. Bulmer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
John S. Bulmer has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Adarsh Kaniyoor
Department of Materials Science and Metallurgy, University of Cambridge, Cambridge CB3 0FS, UK
2 shared publications Benji Maruyama
Air Force Research Laboratory, Materials and Manufacturing Directorate, AFRL/RX, Wright-Patterson Air Force Base, Ohio 45433, United States
2 shared publications- James A. Elliott
Department of Materials Science & Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge, CB3 0FS, United Kingdom
2 shared publications - Thurid S. Gspann
Institute of Nanotechnology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
2 shared publications Timothy Haugan
2 shared publicationsAdam M. Boies
1 shared publication
Latest Publications
- 13 July 2023
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 23 (14) , 6458-6464
Self-Assembly of Uniaxial Fullerene Supramolecules Aligned within Carbon Nanotube Fibers
The conductivity and strength of carbon nanotube (CNT)wires currentlyrival those of existing engineering materials; fullerene-based materialshave not progressed similarly, despite their exciting transport propertiessuch as superconductivity. This communication reveals a new mechanicallyrobust wire of mutually aligned fullerene supramolecules self-assembledbetween CNT bundles, where the fullerene supramolecular internal crystalstructure and outer surface are aligned and dispersed with the CNTbundles. The crystallinity, crystal dimensions, and other structuralfeatures of the fullerene supramolecular network are impacted by anumber of important production processes such as fullerene concentrationand postprocess annealing. The crystal spacing of the CNTs and fullerenesis not altered, suggesting that they are not exerting significantinternal pressure on each other. In low concentrations, the additionof networked fullerenes makes the CNT wire mechanically stronger.More importantly, novel mutually aligned and networked fullerene supramoleculesare now in a bulk self-supporting architecture.
- 13 July 2023
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 23 (14) , 6458-6464
Self-Assembly of Uniaxial Fullerene Supramolecules Aligned within Carbon Nanotube Fibers
The conductivity and strength of carbon nanotube (CNT)wires currentlyrival those of existing engineering materials; fullerene-based materialshave not progressed similarly, despite their exciting transport propertiessuch as superconductivity. This communication reveals a new mechanicallyrobust wire of mutually aligned fullerene supramolecules self-assembledbetween CNT bundles, where the fullerene supramolecular internal crystalstructure and outer surface are aligned and dispersed with the CNTbundles. The crystallinity, crystal dimensions, and other structuralfeatures of the fullerene supramolecular network are impacted by anumber of important production processes such as fullerene concentrationand postprocess annealing. The crystal spacing of the CNTs and fullerenesis not altered, suggesting that they are not exerting significantinternal pressure on each other. In low concentrations, the additionof networked fullerenes makes the CNT wire mechanically stronger.More importantly, novel mutually aligned and networked fullerene supramoleculesare now in a bulk self-supporting architecture.
- 1 March 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (9) , 094302
Field emission cathodes made from knitted carbon nanotube fiber fabrics
Field electron emission cathodes were constructed from knitted fabrics comprised entirely of carbon nanotube (CNT) fibers. The fabrics consisted of a top layer array of ∼2 mm high looped structures and a bottom layer that was 1 mm thick with a flat underlying surface. Field emission (FE) experiments were performed on 25.4 mm diameter CNT fabric cathodes in both direct current (DC) and pulsed voltage (PV) modes, and the results were compared to those obtained from a CNT film cathode. The DC measurements were performed at a maximum voltage of 1.5 kV. The CNT fabric cathode emitted 20 mA, which was an 8× increase over the emission current from the CNT film cathode. The DC results were analyzed using the corrected form of the Fowler–Nordheim FE theory initially developed by Murphy and Good, which allows for the determination of the formal emission area and effective gap-field enhancement factor. The PV experiments resulted in Ampere level emission currents from both CNT fabric and CNT film cathodes. For a 25 kV, 500 ns voltage pulse, the CNT fabric cathode emitted 4 A, which was 2× more current than the CNT film cathode. Scanning electron microscopy imaging after PV testing revealed that the fibers remained intact after >5000 pulses. These results indicate that knitted CNT fabrics offer a promising approach for developing large area, conformable, robust FE cathodes for vacuum electronic devices.
- 1 March 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (9) , 094302
Field emission cathodes made from knitted carbon nanotube fiber fabrics
Field electron emission cathodes were constructed from knitted fabrics comprised entirely of carbon nanotube (CNT) fibers. The fabrics consisted of a top layer array of ∼2 mm high looped structures and a bottom layer that was 1 mm thick with a flat underlying surface. Field emission (FE) experiments were performed on 25.4 mm diameter CNT fabric cathodes in both direct current (DC) and pulsed voltage (PV) modes, and the results were compared to those obtained from a CNT film cathode. The DC measurements were performed at a maximum voltage of 1.5 kV. The CNT fabric cathode emitted 20 mA, which was an 8× increase over the emission current from the CNT film cathode. The DC results were analyzed using the corrected form of the Fowler–Nordheim FE theory initially developed by Murphy and Good, which allows for the determination of the formal emission area and effective gap-field enhancement factor. The PV experiments resulted in Ampere level emission currents from both CNT fabric and CNT film cathodes. For a 25 kV, 500 ns voltage pulse, the CNT fabric cathode emitted 4 A, which was 2× more current than the CNT film cathode. Scanning electron microscopy imaging after PV testing revealed that the fibers remained intact after >5000 pulses. These results indicate that knitted CNT fabrics offer a promising approach for developing large area, conformable, robust FE cathodes for vacuum electronic devices.
- Open Access
- 19 July 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (36) , 2008432
A Meta‐Analysis of Conductive and Strong Carbon Nanotube Materials
A study of 1304 data points collated over 266 papers statistically evaluates the relationships between carbon nanotube (CNT) material characteristics, including: electrical, mechanical, and thermal properties; ampacity; density; purity; microstructure alignment; molecular dimensions and graphitic perfection; and doping. Compared to conductive polymers and graphitic intercalation compounds, which have exceeded the electrical conductivity of copper, CNT materials are currently one‐sixth of copper's conductivity, mechanically on‐par with synthetic or carbon fibers, and exceed all the other materials in terms of a multifunctional metric. Doped, aligned few‐wall CNTs (FWCNTs) are the most superior CNT category; from this, the acid‐spun fiber subset are the most conductive, and the subset of fibers directly spun from floating catalyst chemical vapor deposition are strongest on a weight basis. The thermal conductivity of multiwall CNT material rivals that of FWCNT materials. Ampacity follows a diameter‐dependent power‐law from nanometer to millimeter scales. Undoped, aligned FWCNT material reaches the intrinsic conductivity of CNT bundles and single‐crystal graphite, illustrating an intrinsic limit requiring doping for copper‐level conductivities. Comparing an assembly of CNTs (forming mesoscopic bundles, then macroscopic material) to an assembly of graphene (forming single‐crystal graphite crystallites, then carbon fiber), the ≈1 µm room‐temperature, phonon‐limited mean‐free‐path shared between graphene, metallic CNTs, and activated semiconducting CNTs is highlighted, deemphasizing all metallic helicities for CNT power transmission applications.
- 19 July 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (36) , 2008432
Open AccessA Meta‐Analysis of Conductive and Strong Carbon Nanotube Materials
A study of 1304 data points collated over 266 papers statistically evaluates the relationships between carbon nanotube (CNT) material characteristics, including: electrical, mechanical, and thermal properties; ampacity; density; purity; microstructure alignment; molecular dimensions and graphitic perfection; and doping. Compared to conductive polymers and graphitic intercalation compounds, which have exceeded the electrical conductivity of copper, CNT materials are currently one‐sixth of copper's conductivity, mechanically on‐par with synthetic or carbon fibers, and exceed all the other materials in terms of a multifunctional metric. Doped, aligned few‐wall CNTs (FWCNTs) are the most superior CNT category; from this, the acid‐spun fiber subset are the most conductive, and the subset of fibers directly spun from floating catalyst chemical vapor deposition are strongest on a weight basis. The thermal conductivity of multiwall CNT material rivals that of FWCNT materials. Ampacity follows a diameter‐dependent power‐law from nanometer to millimeter scales. Undoped, aligned FWCNT material reaches the intrinsic conductivity of CNT bundles and single‐crystal graphite, illustrating an intrinsic limit requiring doping for copper‐level conductivities. Comparing an assembly of CNTs (forming mesoscopic bundles, then macroscopic material) to an assembly of graphene (forming single‐crystal graphite crystallites, then carbon fiber), the ≈1 µm room‐temperature, phonon‐limited mean‐free‐path shared between graphene, metallic CNTs, and activated semiconducting CNTs is highlighted, deemphasizing all metallic helicities for CNT power transmission applications.
- 1 May 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-01 (15) , 965
(Invited) Synthesis and Properties of All SWCNT Metallic Nanotube Wire
Copper and aluminum wire conductors are the principal means of conducting electricity. However, they add weight, possess poor fatigue and corrosion resistance and suffer from electromigration under severe conditions. Carbon nanotube (CNT) conductors have long been thought able to replace metals but still fall short of copper in electrical conductivity. CNT wires have so far displaced metal conductors in only a few high value-added applications. In this presentation, we outline an approach to create CNT conductors that address copper shortcomings. These carbon-based wires are made by a new high rate process to grow all metallic (armchair) CNT single wall tubes which are spun into wire in situ within the reactor all in one step, thereby keeping air away from the contacting surfaces of the tubes. We discuss a model of growth in terms of entropy of formation and radiation induced sympathetic vibration. In all other CNT yarn formation methods known to us, multistep processes are required which add cost or omit spinning. This latter process is necessary to add strength and improve conductivity. The innovations described in this talk include (1) methods for synthesis of nearly all metallic single chirality carbon nanotubes, and (2) the in situ spinning of these nanotubes within the reactor to a finished wire. We describe their properties determined by Raman, TGA, and structure by SEM and TEM. The conductivity of CNT wires depends on CNT alignment, surface contamination, control over the interfaces (Schottky barriers), and density. Yarns made from nanotubes of exactly the same diameters are also expected to pack well in the wire and provide better properties than the more typical random and larger diameters sometimes made. The combination of Boronite’s approach to create all CNT wire from uniform nanotubes with metallic chirality with the increasing commercial pressure to reduce weight, increase strength, and operational temperature, opens up commercial opportunities for very lightweight wiring in applications from aircraft to rotating machinery used at high temperatures. Weight saving in a variety of products is especially important for aircraft, cars, and even for large electric systems required to deliver very high current pulses. Boronite has also developed a unique method for infiltrating CNT spun yarn with copper, silver or aluminum to create electromigration resistant materials that can carry extreme currents.
- 1 May 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-01 (15) , 965
(Invited) Synthesis and Properties of All SWCNT Metallic Nanotube Wire
Copper and aluminum wire conductors are the principal means of conducting electricity. However, they add weight, possess poor fatigue and corrosion resistance and suffer from electromigration under severe conditions. Carbon nanotube (CNT) conductors have long been thought able to replace metals but still fall short of copper in electrical conductivity. CNT wires have so far displaced metal conductors in only a few high value-added applications. In this presentation, we outline an approach to create CNT conductors that address copper shortcomings. These carbon-based wires are made by a new high rate process to grow all metallic (armchair) CNT single wall tubes which are spun into wire in situ within the reactor all in one step, thereby keeping air away from the contacting surfaces of the tubes. We discuss a model of growth in terms of entropy of formation and radiation induced sympathetic vibration. In all other CNT yarn formation methods known to us, multistep processes are required which add cost or omit spinning. This latter process is necessary to add strength and improve conductivity. The innovations described in this talk include (1) methods for synthesis of nearly all metallic single chirality carbon nanotubes, and (2) the in situ spinning of these nanotubes within the reactor to a finished wire. We describe their properties determined by Raman, TGA, and structure by SEM and TEM. The conductivity of CNT wires depends on CNT alignment, surface contamination, control over the interfaces (Schottky barriers), and density. Yarns made from nanotubes of exactly the same diameters are also expected to pack well in the wire and provide better properties than the more typical random and larger diameters sometimes made. The combination of Boronite’s approach to create all CNT wire from uniform nanotubes with metallic chirality with the increasing commercial pressure to reduce weight, increase strength, and operational temperature, opens up commercial opportunities for very lightweight wiring in applications from aircraft to rotating machinery used at high temperatures. Weight saving in a variety of products is especially important for aircraft, cars, and even for large electric systems required to deliver very high current pulses. Boronite has also developed a unique method for infiltrating CNT spun yarn with copper, silver or aluminum to create electromigration resistant materials that can carry extreme currents.