David Mimoun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
David Mimoun has a total of 735 co-authors. Here are the top co-authors by number of shared publications:
- Naomi Murdoch
Université de Toulouse
30 shared publications - Philippe Lognonné
Université Paris Cité Institut de Physique du Globe de Paris CNRS Paris France
23 shared publications - Raphael François Garcia
ISAE-SUPAERO, 10 Avenue Marc Pelegrin, Toulouse, 31400, France [FR
20 shared publications - Alexander E. Stott
ISAE-SUPAERO, Unknown, Toulouse, France [FR
18 shared publications - Ralph D. Lorenz
Johns Hopkins University
17 shared publications - Claire Newman
Aeolis Research Chandler AZ USA
13 shared publications
Latest Publications
- Open Access
- 1 May 2026
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 7 (5) , 104
Guidelines for Estimating the 3D Size and Shape of Boulders from Planetary Surface Images
The shape of boulders on planetary surfaces can be used to investigate the geological processes that influence them and to estimate key surface mechanical properties. Such studies are typically based on 2D images, although 2D projections of irregular particles are known to differ from their 3D geometry. To investigate how well 2D images represent 3D morphological parameters, we assess to compare particle shapes in both representations (2D and 3D). Three different granular samples were investigated (LHS-1 lunar highland simulant, Øysand sand, and glass grit) using 3D X-ray computed tomography (3DXRCT) to reconstruct 3D particle geometries within the samples. More than 2700 particles are analyzed using both their full 3D shapes and different 2D projections derived from the 3D reconstructions. Using correlations between 2D and 3D morphological analyses of the 3DXRCT scan data set, we establish statistical relationships, with associated confidence intervals, between the two representations. The outcome is a methodology for estimating 3D size and shape parameters from 2D measurements. We apply this approach to boulders observed on asteroid Bennu by the NASA OSIRIS-REx mission. The resulting 3D size and shape parameters, estimated from 2D images, closely match the true 3D parameters derived from LIDAR data. We conclude with a set of recommendations for performing reliable morphological analyses of boulders and particles in 2D planetary images, including considerations of image resolution and sample size.
- 1 May 2026
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 7 (5) , 104
Open AccessGuidelines for Estimating the 3D Size and Shape of Boulders from Planetary Surface Images
The shape of boulders on planetary surfaces can be used to investigate the geological processes that influence them and to estimate key surface mechanical properties. Such studies are typically based on 2D images, although 2D projections of irregular particles are known to differ from their 3D geometry. To investigate how well 2D images represent 3D morphological parameters, we assess to compare particle shapes in both representations (2D and 3D). Three different granular samples were investigated (LHS-1 lunar highland simulant, Øysand sand, and glass grit) using 3D X-ray computed tomography (3DXRCT) to reconstruct 3D particle geometries within the samples. More than 2700 particles are analyzed using both their full 3D shapes and different 2D projections derived from the 3D reconstructions. Using correlations between 2D and 3D morphological analyses of the 3DXRCT scan data set, we establish statistical relationships, with associated confidence intervals, between the two representations. The outcome is a methodology for estimating 3D size and shape parameters from 2D measurements. We apply this approach to boulders observed on asteroid Bennu by the NASA OSIRIS-REx mission. The resulting 3D size and shape parameters, estimated from 2D images, closely match the true 3D parameters derived from LIDAR data. We conclude with a set of recommendations for performing reliable morphological analyses of boulders and particles in 2D planetary images, including considerations of image resolution and sample size.
- Open Access
- 25 April 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (8)
The Dissipation Regime of Turbulence on Mars Observed With Microphone Data From the Mars 2020 Perseverance Rover
Turbulent winds are a regular occurrence in planetary boundary layers. Turbulence affects mixing, energy fluxes and forcing on the surface environment. Energy injected into an atmosphere generates eddies of many scales down to a size where molecular viscous forces dominate, termed the Kolmogorov length scale. Here, we present an analysis of the turbulent energy cascade at this scale, the transition between the inertial and dissipative regimes, for the first time on Mars. This analysis is based on data from the SuperCam microphone on the Perseverance mission. We find a distribution of power laws in the inertial regime predominantly between −3 and −1 and the distribution of the Kolmogorov length scale from 0.005 to 0.03 m. This yields estimates of the dissipation rate of turbulence between 0.0001 and 1 . We compare these values to those calculated using Monin‐Obukhov similarity theory, identifying potential shortcomings for its application on Mars without modification.
- 25 April 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (8)
Open AccessThe Dissipation Regime of Turbulence on Mars Observed With Microphone Data From the Mars 2020 Perseverance Rover
Turbulent winds are a regular occurrence in planetary boundary layers. Turbulence affects mixing, energy fluxes and forcing on the surface environment. Energy injected into an atmosphere generates eddies of many scales down to a size where molecular viscous forces dominate, termed the Kolmogorov length scale. Here, we present an analysis of the turbulent energy cascade at this scale, the transition between the inertial and dissipative regimes, for the first time on Mars. This analysis is based on data from the SuperCam microphone on the Perseverance mission. We find a distribution of power laws in the inertial regime predominantly between −3 and −1 and the distribution of the Kolmogorov length scale from 0.005 to 0.03 m. This yields estimates of the dissipation rate of turbulence between 0.0001 and 1 . We compare these values to those calculated using Monin‐Obukhov similarity theory, identifying potential shortcomings for its application on Mars without modification.
- Open Access
- 10 July 2025
- Published by Wiley in ESS Open Archive
The Dissipation Regime of Turbulence on Mars With Microphone Data From the Mars 2020 Perseverance Rover
- 10 July 2025
- Published by Wiley in ESS Open Archive
Open AccessThe Dissipation Regime of Turbulence on Mars With Microphone Data From the Mars 2020 Perseverance Rover
- Open Access
- 22 February 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 130 (2)
WindSightNet: The Inter‐Annual Variability of Martian Winds Retrieved From InSight's Seismic Data With Machine Learning
Wind measurements from landed missions on Mars are vital to characterize the near surface atmospheric behavior on Mars and improve atmospheric models. These winds are responsible for aeolian change and the mixing of dust in and out of the atmosphere, which has a significant effect on global circulation. The NASA InSight mission recorded wind data for around 750 sols. The seismometer, however, recorded data for around 1400 sols. The dominant source of energy in the seismic data is in fact due to winds. To this end, we propose a machine learning model, dubbed WindSightNet, to map the seismic data to wind speed and direction. The trained network achieves wind speed and direction measurements with errors of 0.932 m/s and 32.6°. We use WindSightNet to retrieve winds from the entire time the seismometer was recording to compare year‐to‐year wind variations at InSight. The continuous nature of the data set enables the extraction of periodic behavior. We observe a pattern of waves due to baroclinic activity with periods of 2–3, 4, 5–7 and 9–20 sols occurring 180–360°. We also observe periodicity during the day due to convective cells. This is used to estimate the boundary layer height, yielding values between 2.3 and 7.7 km. A data‐science based metric is proposed to provide a quantification of the year‐to‐year differences in the wind speeds. This highlights variations linked to dust activity as well as other transient differences. On the whole, the seismic‐derived winds confirm the dominance of the global circulation leading to repeatable weather patterns.
- 22 February 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 130 (2)
Open AccessWindSightNet: The Inter‐Annual Variability of Martian Winds Retrieved From InSight's Seismic Data With Machine Learning
Wind measurements from landed missions on Mars are vital to characterize the near surface atmospheric behavior on Mars and improve atmospheric models. These winds are responsible for aeolian change and the mixing of dust in and out of the atmosphere, which has a significant effect on global circulation. The NASA InSight mission recorded wind data for around 750 sols. The seismometer, however, recorded data for around 1400 sols. The dominant source of energy in the seismic data is in fact due to winds. To this end, we propose a machine learning model, dubbed WindSightNet, to map the seismic data to wind speed and direction. The trained network achieves wind speed and direction measurements with errors of 0.932 m/s and 32.6°. We use WindSightNet to retrieve winds from the entire time the seismometer was recording to compare year‐to‐year wind variations at InSight. The continuous nature of the data set enables the extraction of periodic behavior. We observe a pattern of waves due to baroclinic activity with periods of 2–3, 4, 5–7 and 9–20 sols occurring 180–360°. We also observe periodicity during the day due to convective cells. This is used to estimate the boundary layer height, yielding values between 2.3 and 7.7 km. A data‐science based metric is proposed to provide a quantification of the year‐to‐year differences in the wind speeds. This highlights variations linked to dust activity as well as other transient differences. On the whole, the seismic‐derived winds confirm the dominance of the global circulation leading to repeatable weather patterns.
- Open Access
- 12 December 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1
Author Correction: Mechanical properties of rubble pile asteroids (Dimorphos, Itokawa, Ryugu, and Bennu) through surface boulder morphological analysis
- 12 December 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1
Open AccessAuthor Correction: Mechanical properties of rubble pile asteroids (Dimorphos, Itokawa, Ryugu, and Bennu) through surface boulder morphological analysis
- Open Access
- 17 September 2024
- Published by Wiley
WindSightNet: the inter-annual variability of Martian winds retrieved from InSight’s seismic data with machine learning
Wind measurements from landed missions on Mars are vital to characterise the near surface atmospheric behaviour on Mars and improve atmospheric models. These winds are responsible for aeolian change and the mixing of dust in and out of the atmosphere, which has a significant effect on the global circulation. The NASA InSight mission successfully recorded wind data for around 750 sols. The seismometer, however, recorded nearly continuous data for around 1400 sols. The dominant source of energy in the seismic data is in fact due to the wind. To this end, we propose a machine learning model, dubbed WindSightNet, to map the seismic data to wind speed and direction. This converts the atmospheric information in the seismic data into a physically meaningful wind signal which can be used for analysis. We retrieve wind data from the entire period the seismometer was recording which enables a comparison of the year-to-year wind variations at InSight. The continuous nature of the dataset also enables the extraction of information on baroclinic activity at long periods and the periodicity of observed convective cells. A data science based metric is proposed to provide a quantification of the year-to-year differences in the wind speeds, which highlights variations linked to dust activity as well as other transient differences worthy of further study. On the whole, the seismic-derived winds confirm the dominance of the global circulation on the winds leading to highly repeatable weather patterns.
- 17 September 2024
- Published by Wiley
Open AccessWindSightNet: the inter-annual variability of Martian winds retrieved from InSight’s seismic data with machine learning
Wind measurements from landed missions on Mars are vital to characterise the near surface atmospheric behaviour on Mars and improve atmospheric models. These winds are responsible for aeolian change and the mixing of dust in and out of the atmosphere, which has a significant effect on the global circulation. The NASA InSight mission successfully recorded wind data for around 750 sols. The seismometer, however, recorded nearly continuous data for around 1400 sols. The dominant source of energy in the seismic data is in fact due to the wind. To this end, we propose a machine learning model, dubbed WindSightNet, to map the seismic data to wind speed and direction. This converts the atmospheric information in the seismic data into a physically meaningful wind signal which can be used for analysis. We retrieve wind data from the entire period the seismometer was recording which enables a comparison of the year-to-year wind variations at InSight. The continuous nature of the dataset also enables the extraction of information on baroclinic activity at long periods and the periodicity of observed convective cells. A data science based metric is proposed to provide a quantification of the year-to-year differences in the wind speeds, which highlights variations linked to dust activity as well as other transient differences worthy of further study. On the whole, the seismic-derived winds confirm the dominance of the global circulation on the winds leading to highly repeatable weather patterns.
- Open Access
- 30 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
Mechanical properties of rubble pile asteroids (Dimorphos, Itokawa, Ryugu, and Bennu) through surface boulder morphological analysis
Planetary defense efforts rely on estimates of the mechanical properties of asteroids, which are difficult to constrain accurately from Earth. The mechanical properties of asteroid material are also important in the interpretation of the Double Asteroid Redirection Test (DART) impact. Here we perform a detailed morphological analysis of the surface boulders on Dimorphos using images, the primary data set available from the DART mission. We estimate the bulk angle of internal friction of the boulders to be 32.7 ± 2. 5° from our measurements of the roundness of the 34 best-resolved boulders ranging in size from 1.67–6.64 m. The elongated nature of the boulders around the DART impact site implies that they were likely formed through impact processing. Finally, we find striking similarities in the morphology of the boulders on Dimorphos with those on other rubble pile asteroids (Itokawa, Ryugu and Bennu). This leads to very similar internal friction angles across the four bodies and suggests that a common formation mechanism has shaped the boulders. Our results provide key inputs for understanding the DART impact and for improving our knowledge about the physical properties, the formation and the evolution of both near-Earth rubble-pile and binary asteroids.
- 30 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
Open AccessMechanical properties of rubble pile asteroids (Dimorphos, Itokawa, Ryugu, and Bennu) through surface boulder morphological analysis
Planetary defense efforts rely on estimates of the mechanical properties of asteroids, which are difficult to constrain accurately from Earth. The mechanical properties of asteroid material are also important in the interpretation of the Double Asteroid Redirection Test (DART) impact. Here we perform a detailed morphological analysis of the surface boulders on Dimorphos using images, the primary data set available from the DART mission. We estimate the bulk angle of internal friction of the boulders to be 32.7 ± 2. 5° from our measurements of the roundness of the 34 best-resolved boulders ranging in size from 1.67–6.64 m. The elongated nature of the boulders around the DART impact site implies that they were likely formed through impact processing. Finally, we find striking similarities in the morphology of the boulders on Dimorphos with those on other rubble pile asteroids (Itokawa, Ryugu and Bennu). This leads to very similar internal friction angles across the four bodies and suggests that a common formation mechanism has shaped the boulders. Our results provide key inputs for understanding the DART impact and for improving our knowledge about the physical properties, the formation and the evolution of both near-Earth rubble-pile and binary asteroids.
- Open Access
- 10 July 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 129 (7)
Acoustic Propagation in the Near‐Surface Martian Atmosphere
This work introduces a comprehensive model of sound propagation on Mars, in light of the recent operation of several microphones on the Martian surface. The main outcome of this work is an operational acoustic model capable of simulating the sound field created by any source, at any location on the Martian surface, at any time. Expanding on the result of previous work (Gillier et al., 2024, https://doi.org/10.1029/2023je008257 ), we use the parabolic equation method for sound propagation in order to obtain the overall sound field produced by a source, in a given atmospheric composition and state, and accounting for ground properties. The resulting model enables the study of acoustics on Mars, and has the potential also to be used to probe the properties of the Martian environment using acoustic measurements with known sources. We investigate the effects of the Martian ground and the vertical profile of temperature and wind, on sound propagation. We find that the ground has a minor effect on sound propagation, and the wind profile strongly influences sound propagation as on Earth. However, the midday near surface temperature profiles on Mars are shown to cause refraction, which generates non‐negligible acoustic losses that are an order of magnitude stronger than typical refraction‐related acoustic losses on Earth. We show that the effect of the Martian atmospheric turbulence is to slightly reduce the acoustic losses due to refraction. Finally, we apply our model to show that refraction and atmospheric turbulence have a negligible effect on the propagation of sound from Ingenuity to the Perseverance rover.
- 10 July 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 129 (7)
Open AccessAcoustic Propagation in the Near‐Surface Martian Atmosphere
This work introduces a comprehensive model of sound propagation on Mars, in light of the recent operation of several microphones on the Martian surface. The main outcome of this work is an operational acoustic model capable of simulating the sound field created by any source, at any location on the Martian surface, at any time. Expanding on the result of previous work (Gillier et al., 2024, https://doi.org/10.1029/2023je008257 ), we use the parabolic equation method for sound propagation in order to obtain the overall sound field produced by a source, in a given atmospheric composition and state, and accounting for ground properties. The resulting model enables the study of acoustics on Mars, and has the potential also to be used to probe the properties of the Martian environment using acoustic measurements with known sources. We investigate the effects of the Martian ground and the vertical profile of temperature and wind, on sound propagation. We find that the ground has a minor effect on sound propagation, and the wind profile strongly influences sound propagation as on Earth. However, the midday near surface temperature profiles on Mars are shown to cause refraction, which generates non‐negligible acoustic losses that are an order of magnitude stronger than typical refraction‐related acoustic losses on Earth. We show that the effect of the Martian atmospheric turbulence is to slightly reduce the acoustic losses due to refraction. Finally, we apply our model to show that refraction and atmospheric turbulence have a negligible effect on the propagation of sound from Ingenuity to the Perseverance rover.
- Open Access
- 7 May 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 129 (5)
Geographical, Seasonal and Diurnal Variations of Acoustic Attenuation, and Sound Speed in the Near‐Surface Martian Atmosphere
This work introduces a comprehensive model of sound attenuation and speed on Mars, in light of the recent operation of several microphones on the surface of Mars. The proposed acoustic model calculates the sound speed and attenuation throughout the near‐surface Martian atmosphere based on first‐principles. We evaluate the effects of the seasonal and diurnal cycle of air temperature, pressure and CO2, as well as the concentration of airborne dust on the sound attenuation. The attenuation and speed of sound are most sensitive to the air temperature and, therefore, they vary with the diurnal temperature cycle and to a lesser degree with the seasonal changes in temperature. The speed of sound also varies with the seasonal variations of the concentration of CO2. The main outcome of this work is an acoustic model capable of computing the sound speed and attenuation for any location at the Martian surface at any time of year and any time of day.
- 7 May 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 129 (5)
Open AccessGeographical, Seasonal and Diurnal Variations of Acoustic Attenuation, and Sound Speed in the Near‐Surface Martian Atmosphere
This work introduces a comprehensive model of sound attenuation and speed on Mars, in light of the recent operation of several microphones on the surface of Mars. The proposed acoustic model calculates the sound speed and attenuation throughout the near‐surface Martian atmosphere based on first‐principles. We evaluate the effects of the seasonal and diurnal cycle of air temperature, pressure and CO2, as well as the concentration of airborne dust on the sound attenuation. The attenuation and speed of sound are most sensitive to the air temperature and, therefore, they vary with the diurnal temperature cycle and to a lesser degree with the seasonal changes in temperature. The speed of sound also varies with the seasonal variations of the concentration of CO2. The main outcome of this work is an acoustic model capable of computing the sound speed and attenuation for any location at the Martian surface at any time of year and any time of day.
- 18 March 2024
- Published by Springer Nature in Space Science Reviews
- Vol. 220 (3) , 1-36
The In Situ Evaluation of the SEIS Noise Model
- 18 March 2024
- Published by Springer Nature in Space Science Reviews
- Vol. 220 (3) , 1-36
The In Situ Evaluation of the SEIS Noise Model