Zhijian Chen
Research Subjects
Zhijian Chen has a total of 126 co-authors. Here are the top co-authors by number of shared publications:
- Lixin Xiao
Peking University
34 shared publications Bo Qu
State Key Laboratory for Artificial Microstructures and Mesoscopic Physics, School of Physics
28 shared publicationsZehao Zhang
State Key Laboratory for Artificial Microstructures and Mesoscopic Physics, Department of Physics, Peking University, Beijing 100871, P. R. China
16 shared publicationsCuncun Wu
School of Materials Science and Engineering, State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin 300130, China
14 shared publicationsXuan Guo
Key Lab OptoElect Sci & Technol Med, Fujian Prov Key Lab Photon Technol, Minist Educ, Fujian Normal Univ, Fuzhou 350007, People’s Republic of China
14 shared publicationsLixin Xiao
13 shared publications
Latest Publications
- Open Access
- 14 April 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1) , 330
Diamine-Mediated Synergistic Engineering of Orientation and Interfacial Field of 3D/1D Heterojunctions for Efficient Perovskite Photovoltaics
The performance of three-dimensional (3D) perovskite solar cells (PSCs) is predominantly limited by interfacial non-radiative recombination and instability. Although low-dimensional (LD) interlayers, particularly two-dimensional (2D) perovskites, are widely adopted for surface passivation, their heterogeneous n-values and quantum-well confinement often impede charge transport. One-dimensional (1D) perovskites offer a promising alternative due to their structural flexibility and superior passivation capabilities, yet their potential has been underexploited by challenges in controlled crystallization and ordered orientation. Here, we constructed a 3D/PDAI 2 /1D heterojunction through sequential deposition of propane-1,3-diammonium iodide (PDAI 2 ) and 4-amidinopyridinium chloride (4APyCl). The pre-anchored PDAI 2 not only provides field-effect passivation but also templates the subsequent vertical alignment of 1D Pb–I chains assembled with 4APyCl. This configuration establishes continuous out-of-plane charge transport channels, enabling effective surface defect passivation, favorable energy-level alignment, and enhanced interfacial carrier extraction. The resulting inverted PSCs achieved a champion power conversion efficiency of 25.8% and retained 85% of the initial performance after 1000 h of maximum power point tracking under 1-sun illumination. By demonstrating the critical role of molecular orchestration in LD interlayers, this work provides a blueprint for establishing structure–property relationships and guides the rational design of stable and efficient 3D/1D perovskite photovoltaics.
- 14 April 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1) , 330
Open AccessDiamine-Mediated Synergistic Engineering of Orientation and Interfacial Field of 3D/1D Heterojunctions for Efficient Perovskite Photovoltaics
The performance of three-dimensional (3D) perovskite solar cells (PSCs) is predominantly limited by interfacial non-radiative recombination and instability. Although low-dimensional (LD) interlayers, particularly two-dimensional (2D) perovskites, are widely adopted for surface passivation, their heterogeneous n-values and quantum-well confinement often impede charge transport. One-dimensional (1D) perovskites offer a promising alternative due to their structural flexibility and superior passivation capabilities, yet their potential has been underexploited by challenges in controlled crystallization and ordered orientation. Here, we constructed a 3D/PDAI 2 /1D heterojunction through sequential deposition of propane-1,3-diammonium iodide (PDAI 2 ) and 4-amidinopyridinium chloride (4APyCl). The pre-anchored PDAI 2 not only provides field-effect passivation but also templates the subsequent vertical alignment of 1D Pb–I chains assembled with 4APyCl. This configuration establishes continuous out-of-plane charge transport channels, enabling effective surface defect passivation, favorable energy-level alignment, and enhanced interfacial carrier extraction. The resulting inverted PSCs achieved a champion power conversion efficiency of 25.8% and retained 85% of the initial performance after 1000 h of maximum power point tracking under 1-sun illumination. By demonstrating the critical role of molecular orchestration in LD interlayers, this work provides a blueprint for establishing structure–property relationships and guides the rational design of stable and efficient 3D/1D perovskite photovoltaics.
- 12 November 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (47) , 21268-21279
Bidentate Ligand Synergy Enables Homogeneous Perovskite Films for Efficient Cs 2 AgBiBr 6 Solar Cells
- 12 November 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (47) , 21268-21279
Bidentate Ligand Synergy Enables Homogeneous Perovskite Films for Efficient Cs 2 AgBiBr 6 Solar Cells
- 26 February 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (10) , 4037-4045
Highly Oriented Large-Grain 2D Cs3Bi2X9 Polycrystalline Films by an Isogenous-Lattice Homoepitaxy Strategy for Photodetection
Outstanding optoelectronic performances, including high carrier mobility and long carrier diffusion length, have only been observed in single-crystalline Cs3Bi2X9, which requires a lengthy fabrication process but not in the easily formed polycrystalline solids. This discrepancy arises from the disordered crystallization and the resultant unsatisfactory film quality. Herein, we propose an isogenous-lattice homoepitaxy strategy to induce the crystallization of highly oriented, large-grain two-dimensional (2D) Cs3Bi2X9 films via the in situ precrystallized, lattice-matched isogenous three-dimensional (3D) Cs2AgBiBr6 intermediate. The introduced 3D Cs2AgBiBr6 intermediate serves as a primer to initiate and direct the oriented epitaxy of 2D Cs3Bi2X9 while significantly retarding the crystallization process through an additional halogen exchange process, leading to films with grains over 1 μm in size and a highly consistent crystallization orientation. Consequently, the target films exhibit photophysical properties comparable to those of single crystals and superior photodetection performance.
- 26 February 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (10) , 4037-4045
Highly Oriented Large-Grain 2D Cs3Bi2X9 Polycrystalline Films by an Isogenous-Lattice Homoepitaxy Strategy for Photodetection
Outstanding optoelectronic performances, including high carrier mobility and long carrier diffusion length, have only been observed in single-crystalline Cs3Bi2X9, which requires a lengthy fabrication process but not in the easily formed polycrystalline solids. This discrepancy arises from the disordered crystallization and the resultant unsatisfactory film quality. Herein, we propose an isogenous-lattice homoepitaxy strategy to induce the crystallization of highly oriented, large-grain two-dimensional (2D) Cs3Bi2X9 films via the in situ precrystallized, lattice-matched isogenous three-dimensional (3D) Cs2AgBiBr6 intermediate. The introduced 3D Cs2AgBiBr6 intermediate serves as a primer to initiate and direct the oriented epitaxy of 2D Cs3Bi2X9 while significantly retarding the crystallization process through an additional halogen exchange process, leading to films with grains over 1 μm in size and a highly consistent crystallization orientation. Consequently, the target films exhibit photophysical properties comparable to those of single crystals and superior photodetection performance.
- 6 December 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (50) , 12318-12325
Ultrafast Carrier Diffusion in Perovskite Monocrystalline Films
Monocrystalline perovskite materials exhibit superior properties compared with polycrystalline perovskites, including lower defect density, minimal grain boundaries, and enhanced carrier mobility. Nevertheless, the preparation of large-area, high-quality single-crystal films, which could prove invaluable for photoelectronic applications, remains a significant challenge. The study of how their unique properties go beyond polycrystalline thin films is still missing. In our experiment, using polarization-selective transient absorption microscopy, we directly observed the spatial carrier transportation in methylammonium lead iodide (CH3NH3PbI3, MAPbI3) strip-shaped monocrystalline ultrathin films. Ultrafast carrier diffusion transportation was observed. The monocrystalline carrier diffusion coefficient D (∼22 cm2 s-1) is an order of magnitude higher than that in polycrystalline films. Anisotropic carrier diffusion of the MAPbI3 single crystal has been discovered. It is also discovered that the electrons and holes are of different anisotropy and diffusion speed. This ultralong carrier transport inside the monocrystalline film provides solid support for the development of perovskite based photoelectronic devices.
- 6 December 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (50) , 12318-12325
Ultrafast Carrier Diffusion in Perovskite Monocrystalline Films
Monocrystalline perovskite materials exhibit superior properties compared with polycrystalline perovskites, including lower defect density, minimal grain boundaries, and enhanced carrier mobility. Nevertheless, the preparation of large-area, high-quality single-crystal films, which could prove invaluable for photoelectronic applications, remains a significant challenge. The study of how their unique properties go beyond polycrystalline thin films is still missing. In our experiment, using polarization-selective transient absorption microscopy, we directly observed the spatial carrier transportation in methylammonium lead iodide (CH3NH3PbI3, MAPbI3) strip-shaped monocrystalline ultrathin films. Ultrafast carrier diffusion transportation was observed. The monocrystalline carrier diffusion coefficient D (∼22 cm2 s-1) is an order of magnitude higher than that in polycrystalline films. Anisotropic carrier diffusion of the MAPbI3 single crystal has been discovered. It is also discovered that the electrons and holes are of different anisotropy and diffusion speed. This ultralong carrier transport inside the monocrystalline film provides solid support for the development of perovskite based photoelectronic devices.
- 13 October 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 500
Improving carrier transport for stable and efficient perovskite solar cells via MXene-modified 2D perovskite capping layer
- 13 October 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 500
Improving carrier transport for stable and efficient perovskite solar cells via MXene-modified 2D perovskite capping layer
- 10 October 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (35)
Highly Efficient and Bright Blue OLEDs via TSCT‐TADF Molecule Regulated by Indolo[3,2,1‐jk]Carbazole
Thermally activated delayed fluorescence (TADF) materials with the through‐space charge transfer (TSCT) effects can provide a useful approach to efficiently utilize dark state triplet excitons through an efficient reverse intersystem crossing process. TSCT‐TADF emitters PCzoTrz‐ICz with small ∆EST values and high photoluminescence quantum yield is designed and synthesized using common acceptor triazine, donor 3,6‐diphenylcarbazole and Indolo[3,2,1‐jk]carbazole which is a rigid π‐conjugated group with high triplet state and high thermal stability. The doped‐organic light‐emitting diodes using PCzoTrz‐ICz as emitters exhibit high tolerance to host with different polarity and charge transport properties, and PCzoTrz‐ICz doped devices in 2,8‐bis(diphenylphosphoryl)dibenzofuran even realizes a maximum external quantum efficiency (EQEmax) of 32.5% and maximum current efficiency (CEmax) of 74.1 cd A−1, which is higher than EQEmax of 28.1% and CEmax of 64.8 cd A−1 of PCzoTrz. Moreover, PCzoTrz‐ICz can be used as highly efficient sensitizers for narrow band blue emitter of v‐DABNA, and achieves more than EQEmax of 33.3%, maximum luminance of 26,291 cd m−2, CEmax of 42.7 cd A−1 and blue index of 237 cd A−1 CIEy−1.
- 10 October 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (35)
Highly Efficient and Bright Blue OLEDs via TSCT‐TADF Molecule Regulated by Indolo[3,2,1‐jk]Carbazole
Thermally activated delayed fluorescence (TADF) materials with the through‐space charge transfer (TSCT) effects can provide a useful approach to efficiently utilize dark state triplet excitons through an efficient reverse intersystem crossing process. TSCT‐TADF emitters PCzoTrz‐ICz with small ∆EST values and high photoluminescence quantum yield is designed and synthesized using common acceptor triazine, donor 3,6‐diphenylcarbazole and Indolo[3,2,1‐jk]carbazole which is a rigid π‐conjugated group with high triplet state and high thermal stability. The doped‐organic light‐emitting diodes using PCzoTrz‐ICz as emitters exhibit high tolerance to host with different polarity and charge transport properties, and PCzoTrz‐ICz doped devices in 2,8‐bis(diphenylphosphoryl)dibenzofuran even realizes a maximum external quantum efficiency (EQEmax) of 32.5% and maximum current efficiency (CEmax) of 74.1 cd A−1, which is higher than EQEmax of 28.1% and CEmax of 64.8 cd A−1 of PCzoTrz. Moreover, PCzoTrz‐ICz can be used as highly efficient sensitizers for narrow band blue emitter of v‐DABNA, and achieves more than EQEmax of 33.3%, maximum luminance of 26,291 cd m−2, CEmax of 42.7 cd A−1 and blue index of 237 cd A−1 CIEy−1.
- 12 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (16) , 20776-20785
Crown-Assisted CsCu2I3 Growth and Trap Passivation for Perovskite Light-Emitting Diodes
Copper (Cu)-based perovskites are promising for lead-free perovskite light-emitting diodes (PeLEDs). However, it remains a significant challenge to achieve high performance devices due to the nonradiative loss caused by the disordered crystallization and lack of passivation. Crown ethers are known to form host-guest complexes by the interaction between C-O-C groups and certain cations, and 18-crown-6 (18C6) with an appropriate complementary size can interact with Cs+ and Cu+ cations. Herein, we studied the interaction between CsCu2I3 and two crowns with the same cyclic size, 18C6 and dibenzo-18-crown-6 (D18C6). Particularly, D18C6 can reduce the nonradiative recombination rate of CsCu2I3 film by passivating the defects and optimizing the film morphology effectively. The room mean square (RMS) decreased from 5.06 to 2.95 nm, and the PLQY was promoted from 4.71% to 19.9%. Besides, D18C6 can also decrease the barrier of hole injection. The PeLEDs based on D18C6-modified CsCu2I3 realized noticeable improvement with a maximum luminance and EQE of 583 cd/m2 and 0.662%, respectively.
- 12 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (16) , 20776-20785
Crown-Assisted CsCu2I3 Growth and Trap Passivation for Perovskite Light-Emitting Diodes
Copper (Cu)-based perovskites are promising for lead-free perovskite light-emitting diodes (PeLEDs). However, it remains a significant challenge to achieve high performance devices due to the nonradiative loss caused by the disordered crystallization and lack of passivation. Crown ethers are known to form host-guest complexes by the interaction between C-O-C groups and certain cations, and 18-crown-6 (18C6) with an appropriate complementary size can interact with Cs+ and Cu+ cations. Herein, we studied the interaction between CsCu2I3 and two crowns with the same cyclic size, 18C6 and dibenzo-18-crown-6 (D18C6). Particularly, D18C6 can reduce the nonradiative recombination rate of CsCu2I3 film by passivating the defects and optimizing the film morphology effectively. The room mean square (RMS) decreased from 5.06 to 2.95 nm, and the PLQY was promoted from 4.71% to 19.9%. Besides, D18C6 can also decrease the barrier of hole injection. The PeLEDs based on D18C6-modified CsCu2I3 realized noticeable improvement with a maximum luminance and EQE of 583 cd/m2 and 0.662%, respectively.
- 8 January 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (3) , 4099-4107
Passivating A-Site and X-Site Vacancies Simultaneously via N-Heterocyclic Amines for Efficient Cs2AgBiBr6 Solar Cells
To address the toxicity and stability issues of traditional lead halide perovskite solar cells (PSCs), the development of lead-free PSCs, such as Cs2AgBiBr6 solar cells, is of great significance. However, due to the low defect formation energy of Cs2AgBiBr6, a large number of vacancies, including A-site vacancies and X-site vacancies, form during the fabrication process of the Cs2AgBiBr6 film, which seriously damage the performance of the devices. The traditional phenylethylammonium (PEA) cation, mainly focusing on passivating A-site vacancies, is incapable of reducing X-site vacancies and so results in a limited performance improvement in Cs2AgBiBr6 solar cells. Herein, inspired by the capability of the Lewis base to coordinate with metal cations, a series of N-heterocyclic amines are introduced to serve as a dual-site passivator, reducing A-site and X-site vacancies at the same time. The highest power conversion efficiency of modified Cs2AgBiBr6 solar cells has been increased 36% from 1.10 to 1.50%. Further investigation reveals that the higher electron density of additives would lead to a stronger interaction with metal cations like Ag+ and Bi3+, thus reducing more X-site defects and improving carrier dynamics. Our work provides a strategy for passivating perovskite with various kinds of defects and reveals the connection between the coordination capability of additives and device performance enhancement, which could be instructive in improving the performance of lead-free PSCs.
- 8 January 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (3) , 4099-4107
Passivating A-Site and X-Site Vacancies Simultaneously via N-Heterocyclic Amines for Efficient Cs2AgBiBr6 Solar Cells
To address the toxicity and stability issues of traditional lead halide perovskite solar cells (PSCs), the development of lead-free PSCs, such as Cs2AgBiBr6 solar cells, is of great significance. However, due to the low defect formation energy of Cs2AgBiBr6, a large number of vacancies, including A-site vacancies and X-site vacancies, form during the fabrication process of the Cs2AgBiBr6 film, which seriously damage the performance of the devices. The traditional phenylethylammonium (PEA) cation, mainly focusing on passivating A-site vacancies, is incapable of reducing X-site vacancies and so results in a limited performance improvement in Cs2AgBiBr6 solar cells. Herein, inspired by the capability of the Lewis base to coordinate with metal cations, a series of N-heterocyclic amines are introduced to serve as a dual-site passivator, reducing A-site and X-site vacancies at the same time. The highest power conversion efficiency of modified Cs2AgBiBr6 solar cells has been increased 36% from 1.10 to 1.50%. Further investigation reveals that the higher electron density of additives would lead to a stronger interaction with metal cations like Ag+ and Bi3+, thus reducing more X-site defects and improving carrier dynamics. Our work provides a strategy for passivating perovskite with various kinds of defects and reveals the connection between the coordination capability of additives and device performance enhancement, which could be instructive in improving the performance of lead-free PSCs.
- 7 September 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (37) , 18301-18309
Surface Reconstruction for Efficient Cs2AgBiBr6 Solar Cells
- 7 September 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (37) , 18301-18309
Surface Reconstruction for Efficient Cs2AgBiBr6 Solar Cells
- 21 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (30) , 36716-36723
Superstable CsxSnBrx+2@CsBr Nanocrystals with Over 1200 h of Half-Value PLQY in Air
Tin-basedperovskites comprise one of the preferred nontoxic alternativesto Pb-based perovskites due to their desirable optoelectronic properties.However, there remains a crucial stability problem due to the propertyof Sn2+ oxidation. In this study, we reported stable tin-basedperovskite nanocrystals (NCs) using stannous acetate as the Sn2+ source because of its stronger Sn-O bonding. To preventthe oxidation of Sn2+, a thin layer of CsBr coverage wasformed in situ; tin-based perovskite NCs, Cs (x) SnBr x+2@CsBr (1 < x < 4), show a high photoluminescence quantum yield (PLQY) of 78.2%and high stability. The measured lifetime of PLQY decrease to halfof the initial value is & SIM;1287 h under ambient conditions and & SIM;2200 h under a nitrogen atmosphere, respectively. Furthermore,the as-fabricated light-emitting diodes based on Cs (x) SnBr x+2@CsBr NCs as the emittinglayer exhibit a maximum luminescence of 16 cd/m(2) and anexternal quantum efficiency of 0.035% with peaks at 451 and 615 nm,corresponding to the emissions of CsBr and Cs (x) SnBr x+2, respectively. This work provideda new way to obtain stable Sn-based perovskite NCs and exhibited theirpotential for application in white light-emitting diodes (LEDs).
- 21 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (30) , 36716-36723
Superstable CsxSnBrx+2@CsBr Nanocrystals with Over 1200 h of Half-Value PLQY in Air
Tin-basedperovskites comprise one of the preferred nontoxic alternativesto Pb-based perovskites due to their desirable optoelectronic properties.However, there remains a crucial stability problem due to the propertyof Sn2+ oxidation. In this study, we reported stable tin-basedperovskite nanocrystals (NCs) using stannous acetate as the Sn2+ source because of its stronger Sn-O bonding. To preventthe oxidation of Sn2+, a thin layer of CsBr coverage wasformed in situ; tin-based perovskite NCs, Cs (x) SnBr x+2@CsBr (1 < x < 4), show a high photoluminescence quantum yield (PLQY) of 78.2%and high stability. The measured lifetime of PLQY decrease to halfof the initial value is & SIM;1287 h under ambient conditions and & SIM;2200 h under a nitrogen atmosphere, respectively. Furthermore,the as-fabricated light-emitting diodes based on Cs (x) SnBr x+2@CsBr NCs as the emittinglayer exhibit a maximum luminescence of 16 cd/m(2) and anexternal quantum efficiency of 0.035% with peaks at 451 and 615 nm,corresponding to the emissions of CsBr and Cs (x) SnBr x+2, respectively. This work provideda new way to obtain stable Sn-based perovskite NCs and exhibited theirpotential for application in white light-emitting diodes (LEDs).