Po-Yen Lai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Po-Yen Lai has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
Shih-Hung Chen
Department of Physics, National Central University, Jung-Li 32001, Taiwan
9 shared publications- Sheng-Lung Huang
Graduate Institute of Photonics and Optoelectronics, National Taiwan University, Taipei, Taiwan
7 shared publications Chun-Lin Chang
Institute of Photonics and Optoelectronics, National Taiwan University, Taipei 10617, Taiwan
6 shared publicationsHuizhe Liu
Institute of High Performance Computing (IHPC), Agency for Science Technology and Research (A*STAR), Singapore, Republic of Singapore
4 shared publicationsS. H. Chen
Department of Physics, National Central University, Jhongli 32001, Taiwan
4 shared publicationsY. R. Lin-Liu
Department of Physics, National Central University, Jhongli 32001, Taiwan
3 shared publications
Latest Publications
- 22 October 2026
- Published by Springer Nature in International Journal of Biometeorology
- Vol. 70 (11) , 281
Estimating hourly outdoor WBGT from routine meteorological observations for heat-stress assessment in tropical Singapore
Site-specific hourly WBGT information is needed for outdoor heat-stress assessment in hot-humid tropical environments, where heat exposure varies across station locations and work periods. Dedicated WBGT sensors, however, remain spatially limited, constraining routine station-scale assessment and retrospective exposure analysis. This study develops a locally calibrated, compact, physics-motivated formulation (fWBGT) for estimating hourly outdoor WBGT from routine automatic weather-station observations in tropical Singapore. The zero-iteration linear formulation uses a closed-form psychrometric wet-bulb surrogate (\(T_\text {psy}\)), global horizontal irradiance represented by \(\textrm{GHI}^{0.25}\), dry-bulb temperature, and 2-m wind speed to retain radiation- and wind-aware predictors without iterative heat-balance calculations. It was calibrated using five years of hourly co-located data from Changi, Singapore (2020–2024; \(N=31{,}242\)) and benchmarked against iterative, analytic, lookup-table, and multilayer perceptron (MLP) methods. fWBGT reproduced measured WBGT with RMSE = \(0.54\,^\circ \)C, \(R^2=0.936\), and approximately zero MBE. It was less accurate than the MLP (RMSE = \(0.43\,^\circ \)C) but executed approximately 1,750 times faster than the iterative Liljegren model. The simplified WBGT lookup approach showed nighttime errors exceeding \(5.4\,^\circ \)C. In 2025 temporal and spatial validation, fWBGT achieved daytime RMSE \(\le 1.13\,^\circ \)C and nighttime RMSE \(\le 0.71\,^\circ \)C. These results demonstrate that locally calibrated WBGT estimation provides an efficient methodology for station-scale heat-stress screening and exposure assessment in tropical microclimates. While the calibration-and-validation procedure is transferable, the Singapore-specific coefficients require local recalibration prior to application in other environments.- 22 October 2026
- Published by Springer Nature in International Journal of Biometeorology
- Vol. 70 (11) , 281
Estimating hourly outdoor WBGT from routine meteorological observations for heat-stress assessment in tropical Singapore
Site-specific hourly WBGT information is needed for outdoor heat-stress assessment in hot-humid tropical environments, where heat exposure varies across station locations and work periods. Dedicated WBGT sensors, however, remain spatially limited, constraining routine station-scale assessment and retrospective exposure analysis. This study develops a locally calibrated, compact, physics-motivated formulation (fWBGT) for estimating hourly outdoor WBGT from routine automatic weather-station observations in tropical Singapore. The zero-iteration linear formulation uses a closed-form psychrometric wet-bulb surrogate (\(T_\text {psy}\)), global horizontal irradiance represented by \(\textrm{GHI}^{0.25}\), dry-bulb temperature, and 2-m wind speed to retain radiation- and wind-aware predictors without iterative heat-balance calculations. It was calibrated using five years of hourly co-located data from Changi, Singapore (2020–2024; \(N=31{,}242\)) and benchmarked against iterative, analytic, lookup-table, and multilayer perceptron (MLP) methods. fWBGT reproduced measured WBGT with RMSE = \(0.54\,^\circ \)C, \(R^2=0.936\), and approximately zero MBE. It was less accurate than the MLP (RMSE = \(0.43\,^\circ \)C) but executed approximately 1,750 times faster than the iterative Liljegren model. The simplified WBGT lookup approach showed nighttime errors exceeding \(5.4\,^\circ \)C. In 2025 temporal and spatial validation, fWBGT achieved daytime RMSE \(\le 1.13\,^\circ \)C and nighttime RMSE \(\le 0.71\,^\circ \)C. These results demonstrate that locally calibrated WBGT estimation provides an efficient methodology for station-scale heat-stress screening and exposure assessment in tropical microclimates. While the calibration-and-validation procedure is transferable, the Singapore-specific coefficients require local recalibration prior to application in other environments.- Open Access
- 8 August 2026
- Published by Association for Computing Machinery (ACM)
- p. 11272-11283
Ready to Sim? Inverse Parametric Building Modeling via Universal Anchor Representation for Urban Simulation
- 8 August 2026
- Published by Association for Computing Machinery (ACM)
- p. 11272-11283
Open AccessReady to Sim? Inverse Parametric Building Modeling via Universal Anchor Representation for Urban Simulation
- Open Access
- 12 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-12
Study of diffuse scattering on facial surface using ray tracing approach
This study investigates the role of topographic attributes in light scattering and diffuse reflection on the skin surface, and diffuse transmission across the surface layer. Validated ray-tracing simulations establish a quantitative link between subvisible micro texture (SMT) and macro texture to skin optical properties, representing youthful and healthy skin characteristics. Our findings reveal the dominant role of the subvisible micro texture parameter ( $${u}_{w}/{u}_{h}$$ , the ratio of width to height) in governing light scattering. Smaller ratios, corresponding to fine SMT, result in increased diffuse reflection and create a more pronounced soft-focus effect, which plays a critical role in driving profound skin appearance such as radiance. While the macro texture parameter also influences scattering, its impact is less significant. Additionally, we quantify the impact of SMT on the transversal light movement from inside the skin to outside it. This simulation showed that more incident light leaves after traveling inside skin with smaller $${u}_{w}/{u}_{h}$$ , a measure of finer SMT. Our validated 2D subvisible micro texture model accurately computes the light-skin interactions influenced by the various levels of the skin’s topographic features, offering valuable insights for cosmetics, dermatology, and aesthetic medical imaging.- 12 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-12
Open AccessStudy of diffuse scattering on facial surface using ray tracing approach
This study investigates the role of topographic attributes in light scattering and diffuse reflection on the skin surface, and diffuse transmission across the surface layer. Validated ray-tracing simulations establish a quantitative link between subvisible micro texture (SMT) and macro texture to skin optical properties, representing youthful and healthy skin characteristics. Our findings reveal the dominant role of the subvisible micro texture parameter ( $${u}_{w}/{u}_{h}$$ , the ratio of width to height) in governing light scattering. Smaller ratios, corresponding to fine SMT, result in increased diffuse reflection and create a more pronounced soft-focus effect, which plays a critical role in driving profound skin appearance such as radiance. While the macro texture parameter also influences scattering, its impact is less significant. Additionally, we quantify the impact of SMT on the transversal light movement from inside the skin to outside it. This simulation showed that more incident light leaves after traveling inside skin with smaller $${u}_{w}/{u}_{h}$$ , a measure of finer SMT. Our validated 2D subvisible micro texture model accurately computes the light-skin interactions influenced by the various levels of the skin’s topographic features, offering valuable insights for cosmetics, dermatology, and aesthetic medical imaging. - 30 July 2024
- Published by Springer Nature
- p. 373-393
District Cooling System for Singapore’s Residential Cooling
- 30 July 2024
- Published by Springer Nature
- p. 373-393
District Cooling System for Singapore’s Residential Cooling
- Open Access
- 3 March 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (3) , e0282106
Outdoor environmental comfort evaluation for retail planning in a tropical business district using Integrated Environmental Modeller
This research proposes a simulation-based assessment of outdoor thermal and acoustic comfort for a planned business urban district in Singapore for retail planning using a customized OpenFOAM-centric multi-physics environmental simulation platform called the Integrated Environmental Modeller (IEM). IEM was employed to simulate the coupled impacts of solar radiation on wind and air temperature and wind and air temperature effects on traffic noise propagation in the district on the equinox and solstice day of the hottest period. Using IEM simulation results, we computed the thermal and acoustic comfort acceptability indicators derived from local field studies’ results. The spatial distribution of environmental comfort acceptability indicators in the worst-case scenario can be used to distinguish the zones exposed to thermal or noise influence. The noise-affected zones are near the main roads and overlap a part of the thermal-affected area. The thermal-affected area is almost everywhere in the studied sites in the worst-case scenario. Having outdoor retail spaces with both poor thermal and acoustic comfort is not recommended if the thermal and acoustic comfort cannot be improved simultaneously. For the high-level retail planning, a simplified parametric analysis considering solar irradiance blockage and wind speed enhancements, is provided. Considering the worst-case scenario, ≥50% thermal acceptability can be achieved by blocking 54%-68% solar irradiance among the pedestrian thoroughfares and the retail spaces. Coupled together, blocking the solar irradiance and enhancing the wind speed can further improve thermal comfort locally. These results can guide the retail mix (e.g., al fresco restaurants, pop-up kiosks etc.) near high footfall areas and provide reference for future plans combining landscape and infrastructure, (e.g., trees with shelter walkaways, green walls with outdoor ventilation fans etc.) taking into account the environmental acceptability of people working in or visiting the tropical urban district.
- 3 March 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (3) , e0282106
Open AccessOutdoor environmental comfort evaluation for retail planning in a tropical business district using Integrated Environmental Modeller
This research proposes a simulation-based assessment of outdoor thermal and acoustic comfort for a planned business urban district in Singapore for retail planning using a customized OpenFOAM-centric multi-physics environmental simulation platform called the Integrated Environmental Modeller (IEM). IEM was employed to simulate the coupled impacts of solar radiation on wind and air temperature and wind and air temperature effects on traffic noise propagation in the district on the equinox and solstice day of the hottest period. Using IEM simulation results, we computed the thermal and acoustic comfort acceptability indicators derived from local field studies’ results. The spatial distribution of environmental comfort acceptability indicators in the worst-case scenario can be used to distinguish the zones exposed to thermal or noise influence. The noise-affected zones are near the main roads and overlap a part of the thermal-affected area. The thermal-affected area is almost everywhere in the studied sites in the worst-case scenario. Having outdoor retail spaces with both poor thermal and acoustic comfort is not recommended if the thermal and acoustic comfort cannot be improved simultaneously. For the high-level retail planning, a simplified parametric analysis considering solar irradiance blockage and wind speed enhancements, is provided. Considering the worst-case scenario, ≥50% thermal acceptability can be achieved by blocking 54%-68% solar irradiance among the pedestrian thoroughfares and the retail spaces. Coupled together, blocking the solar irradiance and enhancing the wind speed can further improve thermal comfort locally. These results can guide the retail mix (e.g., al fresco restaurants, pop-up kiosks etc.) near high footfall areas and provide reference for future plans combining landscape and infrastructure, (e.g., trees with shelter walkaways, green walls with outdoor ventilation fans etc.) taking into account the environmental acceptability of people working in or visiting the tropical urban district.
- 10 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2298-2303
Machine Learning-based MIMO Signal Detection in Wireless Networks with Random Traffic
In this paper, we propose a novel machine learning-based signal detection scheme for multi-user wireless multiple-input multiple-output (MIMO) networks with random traffic. We focus on the challenging case in which the number of active users that transmit data to the base station in a time slot is a random variable from the viewpoint of the base station. Instead of using multiple machine learning models and exhaustive search, we propose using a novel deep machine learning model that adopts an extended constellation diagram and a loss function based on the nonuniform probability mass function for transmitted symbols. Simulation results reveal that the proposed machine learning-based signal detection scheme outperforms the zero-forcing detector and the minimum mean square error detector in wireless MIMO networks when the number of active users is random.
- 10 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2298-2303
Machine Learning-based MIMO Signal Detection in Wireless Networks with Random Traffic
In this paper, we propose a novel machine learning-based signal detection scheme for multi-user wireless multiple-input multiple-output (MIMO) networks with random traffic. We focus on the challenging case in which the number of active users that transmit data to the base station in a time slot is a random variable from the viewpoint of the base station. Instead of using multiple machine learning models and exhaustive search, we propose using a novel deep machine learning model that adopts an extended constellation diagram and a loss function based on the nonuniform probability mass function for transmitted symbols. Simulation results reveal that the proposed machine learning-based signal detection scheme outperforms the zero-forcing detector and the minimum mean square error detector in wireless MIMO networks when the number of active users is random.
- Open Access
- 19 November 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-10
Investigation of SARS-CoV-2 inactivation using UV-C LEDs in public environments via ray-tracing simulation
This paper proposes an investigating SARS-CoV-2 inactivation on surfaces with UV-C LED irradiation using our in-house-developed ray-tracing simulator. The results are benchmarked with experiments and Zemax OpticStudio commercial software simulation to demonstrate our simulator's easy accessibility and high reliability. The tool can input the radiant profile of the flexible LED source and accurately yield the irradiance distribution emitted from an LED-based system in 3D environments. The UV-C operating space can be divided into the safe, buffer, and germicidal zones for setting up a UV-C LED system. Based on the published measurement data, the level of SARS-CoV-2 inactivation has been defined as a function of UV-C irradiation. A realistic case of public space, i.e., a food court in Singapore, has been numerically investigated to demonstrate the relative impact of environmental UV-C attenuation on the SARS-CoV-2 inactivation. We optimise a specific UV-C LED germicidal system and its corresponding exposure time according to the simulation results. These ray-tracing-based simulations provide a useful guideline for safe deployment and efficient design for germicidal UV-C LED technology.
- 19 November 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-10
Open AccessInvestigation of SARS-CoV-2 inactivation using UV-C LEDs in public environments via ray-tracing simulation
This paper proposes an investigating SARS-CoV-2 inactivation on surfaces with UV-C LED irradiation using our in-house-developed ray-tracing simulator. The results are benchmarked with experiments and Zemax OpticStudio commercial software simulation to demonstrate our simulator's easy accessibility and high reliability. The tool can input the radiant profile of the flexible LED source and accurately yield the irradiance distribution emitted from an LED-based system in 3D environments. The UV-C operating space can be divided into the safe, buffer, and germicidal zones for setting up a UV-C LED system. Based on the published measurement data, the level of SARS-CoV-2 inactivation has been defined as a function of UV-C irradiation. A realistic case of public space, i.e., a food court in Singapore, has been numerically investigated to demonstrate the relative impact of environmental UV-C attenuation on the SARS-CoV-2 inactivation. We optimise a specific UV-C LED germicidal system and its corresponding exposure time according to the simulation results. These ray-tracing-based simulations provide a useful guideline for safe deployment and efficient design for germicidal UV-C LED technology.
- 1 February 2020
- Published by Elsevier in Building and Environment
- Vol. 169
Effectively modeling surface temperature and evaluating mean radiant temperature in tropical outdoor industrial environments
- 1 February 2020
- Published by Elsevier in Building and Environment
- Vol. 169
Effectively modeling surface temperature and evaluating mean radiant temperature in tropical outdoor industrial environments
- 27 April 2018
- Published by Optica Publishing Group in Applied Optics
- Vol. 57 (13) , 3551-3555
Compact millijoule diode-seeded two-stage fiber master oscillator power amplifier using a multipass and forward pumping scheme
The multipass scheme for a diode-seeded fiber master oscillator power amplifier with a nanojoule-to-millijoule output energy level at a repetition rate of is numerically analyzed for comparison to an experimental benchmark. For a 6/125 single-mode preamplifier with a small input energy (), there is a significant improvement in the output energy from 0.7% to 80% and 95% of the maximum extractable energy using the double-pass and four-pass schemes, respectively. For a 30/250 large-mode-area power amplifier using the double-pass and forward pumping scheme, the required input energy is decreased from 100 μJ to 18 μJ for millijoule energy extraction with accompanying Stokes waves of less than 10% of the total energy. The system based on the full master oscillator power amplifier configuration with an output energy exceeding millijoule level can be optimally simplified to two stages for commercialization.- 27 April 2018
- Published by Optica Publishing Group in Applied Optics
- Vol. 57 (13) , 3551-3555
Compact millijoule diode-seeded two-stage fiber master oscillator power amplifier using a multipass and forward pumping scheme
The multipass scheme for a diode-seeded fiber master oscillator power amplifier with a nanojoule-to-millijoule output energy level at a repetition rate of is numerically analyzed for comparison to an experimental benchmark. For a 6/125 single-mode preamplifier with a small input energy (), there is a significant improvement in the output energy from 0.7% to 80% and 95% of the maximum extractable energy using the double-pass and four-pass schemes, respectively. For a 30/250 large-mode-area power amplifier using the double-pass and forward pumping scheme, the required input energy is decreased from 100 μJ to 18 μJ for millijoule energy extraction with accompanying Stokes waves of less than 10% of the total energy. The system based on the full master oscillator power amplifier configuration with an output energy exceeding millijoule level can be optimally simplified to two stages for commercialization.