FGFrancesca Ghisetti

Francesca Ghisetti

*This is an algorithmically generated author record based on publicly available information.

Francesca Ghisetti has a total of 101 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Structural Inheritance and Fault Reactivation in the Nelson Thrust Belt (South Island, New Zealand)

    by Francesca Ghisetti, Mike R Johnston, Paul Wopereis, Hugh Allister Cowan

    The Nelson Thrust Belt (NTB) is a contractional structure within the Australian crust, northwest of the Pacific-Australian plate boundary in the northern South Island of New Zealand. Its structure and evolution record the influence of faults inherited from Paleozoic–Early Mesozoic terrane assembly and Late Cretaceous to Eocene rifting. We integrate revised regional mapping, LiDAR imagery, trench and borehole observations, and reinterpreted vintage seismic reflection lines to reconstruct how inherited fabric controlled fault localization and reactivation. The NTB comprises three principal fault groups, F1–F3, in decreasing order of structural elevation, and a local frontal splay, F4. Geometry, reverse reactivation, and association with syn- to late-rift deposits indicate that F2 and F3 are inverted normal faults. Fault inversion began in the Late Miocene and continued through the Pliocene–Pleistocene, but activity on F3 ceased earlier than on F2. F1 is a low- to moderate-angle thrust fault that truncates the underlying structures out of sequence. Together, these relationships suggest a long-term break-back transfer of deformation, while Late Pleistocene–Holocene seismic rupture of the major faults indicates that multiple structures were reactivated within overlapping earthquake cycles. The NTB provides a test case for recognizing how inherited crustal heterogeneity controlled long-term fault evolution and distributed active deformation in a contractional belt where modern subsurface imaging is limited.

  • Structural evolution, segmentation and activity of the onshore‐offshore Waimea‐Flaxmore Fault System in south‐eastern Tasman Bay, South Island, New Zealand

    by Francesca C. Ghisetti, Mike R. Johnston, Paul Wopereis, Richard H. Sibson

    The Waimea‐Flaxmore Fault System (W‐FFS) from the Nelson‐Richmond urban area to D'Urville Island is analysed through six regional transects that join depth‐converted seismic lines in Tasman Bay to onshore cross sections. Reverse reactivation of basement faults of the W‐FFS by mechanisms of fault‐propagation folding at c. 19‐10 Ma occurred along the entire length of the fault system. However, the W‐FFS remained Quaternary active only from the vicinity of Cape Soucis southwards into onshore Nelson, in contrast with cessation of activity along eastern Tasman Bay since 7 Ma. The inactive western faults of the W‐FFS are buried below Plio‐Quaternary marine sediments and segmented by the newly identified, c. E‐W, Croisilles Fault Zone, Cross Point and D'Urville faults, with cumulative dextral offset of c. 27 km. The c. E‐W faults extend from the onshore into Tasman Bay and are interpreted as the northernmost Late Miocene strands of the Marlborough Fault System that have accommodated incipient distributed shear in the crustal block north of the Queen Charlotte Fault Zone. Segmentation and along‐strike changes of the W‐FFS occur at the transition from the contractional domain of onshore Nelson to the northern Marlborough strike‐slip domain, driven by large‐scale kinematics of the Australia‐Pacific plate boundary.


  • Top Cited Papers

    The New Zealand Community Fault Model – version 1.0: an improved geological foundation for seismic hazard modelling

    by Hannu Seebeck, Russ Van Dissen, Nicola Litchfield, Philip M. Barnes, Andrew Nicol, Robert Langridge, David J. A. Barrell, Pilar Villamor, Susan Ellis, Mark Rattenbury, et al.

    The New Zealand Community Fault Model (NZ CFM) is a publicly available representation of New Zealand fault zones that have the potential to produce damaging earthquakes. Compiled through collaborative engagement between New Zealand earthquake‐science experts, this first edition (version 1.0) of the NZ CFM builds upon previous compilations of earthquake‐source active fault models with the addition of new and modified information. Developed primarily to support an update of the New Zealand National Seismic Hazard Model, the NZ CFM comprises two principal components. The first dataset is a two‐dimensional map representation of the surface traces of 880 generalised fault zones. Each fault zone is assigned specific geometric and kinematic attributes, including uncertainties, supplemented with a subjective quality ranking focused primarily on the confidence in assigned slip rates. The second component is a three‐dimensional representation of the fault zones as triangulated mesh surfaces that are projected down‐dip from the two‐dimensional mapped traces to a geophysically‐defined maximum fault rupture depth. This article summarises the compilation and parameterisation of the NZ CFM, along with background on its relation to predecessor datasets, and forward applications to probabilistic seismic hazard assessment and physics‐based earthquake models currently being developed for Aotearoa New Zealand.


  • Map‐view restorations of the South Island, New Zealand: a reappraisal of the last 10 Myr of evolution of the Alpine and Wairau faults

    by Francesca C. Ghisetti

    Retro‐deformation of horizontal and vertical displacements is used to reconstruct the evolution of the South Island plate boundary faults since the Late Miocene. Finite dextral offset across the Alpine Fault is estimated from a system of N‐S reverse faults displaced from Otago to the Glenroy‐Matakitaki area, where the N‐S tectonic trends are generally interpreted as a ‘bend’ of the Alpine Fault. Increasing dextral offset on the Alpine Fault was accompanied by a NE‐migrating wave of exhumation and uplift of its hanging wall, tracked by syntectonic terrestrial deposits. Strike‐slip and dip‐slip components both decrease near the ‘bend’, where deformation is transferred to the Wairau and Marlborough faults. The Wairau Fault offsets dextrally by c. 50 km the N‐S faults of the Glenroy‐Matakitaki area, correlated with the Waimea‐Flaxmore Fault System of Nelson. Finite dextral separation along the Alpine Fault is 410 km, and the N‐S ‘bend’ is interpreted as a transpressive stepover between the Alpine and the Wairau faults. The lack of connection between the Alpine and Wairau faults, combined with slip transfer to the Hope Fault over the last 2 Myr, do not favour propagation of coseismic rupture from the Alpine Fault to the Wairau Fault across the ‘bend’.


  • Structural evolution of the active Waimea‐Flaxmore Fault System in the Nelson‐Richmond urban area, South Island, New Zealand

    by Francesca C. Ghisetti, Mike R. Johnston, Paul Wopereis

    The Waimea‐Flaxmore Fault System (W‐FFS) comprises NE‐striking, SE‐dipping reverse faults superposing Eastern Province terranes on Cenozoic sedimentary units of the Moutere Depression. We present a revised geological map and cross sections of the W‐FFS in the Nelson‐Richmond urban area, aimed at reconstructing the structural evolution during multiple phases of reactivation. Our data and structural interpretations depict the inversion of the W‐FFS from an inherited system of Late Cretaceous‐Eocene normal faults to multiple reverse fault splays that propagated through the cover sequence over the last 10 Ma. Fault tip propagation with folding of the cover sequence persisted during the Quaternary, with breaching of the Waimea and Flaxmore faults to the surface and propagation of a splay thrust (Tahunanui Fault) still concealed beneath Quaternary deposits. Ongoing crustal shortening associated with the Pacific‐Australian plate boundary in the northern South Island creates favourable conditions for reactivation of the long‐lived W‐FFS in the contemporary stress field.


  • Structural and morpho‐tectonic evidence of Quaternary faulting within the Moutere Depression, South Island, New Zealand

    by Francesca C. Ghisetti, Mike R. Johnston, Paul Wopereis, Richard H. Sibson

    The subsurface structure of the Moutere Depression is obscured by a thick Plio‐Quaternary gravel sequence. Surface and subsurface data have been used to define a blind basement pop‐up bounded to the west by a NNE‐striking reverse fault dipping c. 50°E (Ruby Bay‐Moutere Fault, RB‐MF). The RB‐MF is geometrically and kinematically similar to the adjacent Waimea‐Flaxmore Fault System (W‐FFS) and linked to the Surville Fault offshore and the Tutaki Fault to the south. Reverse‐slip activity on the RB‐MF started post 21–18 Ma and continued after deposition of the lower Pleistocene gravel sequence, but the fault tip remains buried. Persistent Quaternary activity with progressive development of a hanging wall anticline is inferred from surface topography and deformation of late Quaternary river terraces. The collected evidence suggests that the RB‐MF is capable of being reactivated in the present‐day stress field, though slip rates are lower than those of the Holocene‐active W‐FFS.


  • Review: Factors Affecting the Assessment of Earthquake Hazard from Compressional Inversion Structure

    by Richard H. Sibson, Francesca C. Ghisetti

    Compressional inversion involves reverse‐slip reactivation (± strike slip) of normal faults inherited from earlier crustal extension during crustal shortening. Examples of seismically active inversion provinces with damaging earthquakes M<7.8 range from active island arc systems to formerly rifted cratonic crust. Inversion structures are characterized by a distinctive structural‐stratigraphic signature shown by seismic reflection profiling to be quite widespread. Compressional inversion is largely responsible for an anomalous group of seismically active reverse faults dipping at 45°–60°, distinct from dominant Andersonian thrust dips of 30°±5°. Time‐averaged slip rates on such structures are generally slow (about 1  mm/yr, or less) and total reverse displacement is often limited. Reactivation mechanics does much to explain the observed dip distribution for reverse‐slip ruptures, suggesting first that low‐displacement faults are characterized overall by Byerlee friction (μs∼0.6), and second that high fluid overpressures are needed for reactivation of moderate‐steep reverse faults. Support for the latter comes from hydrothermal veining apparently produced by fault‐valve action on reverse faults exhumed from seismogenic depths, and from distinctive geophysical anomalies in the midcrust of areas undergoing active inversion. Nucleation of earthquake ruptures on inversion structures appears to be fluid driven (H2O, CO2, etc.), with failure triggered by locally rising fluid overpressure rather than by increasing differential stress alone. Evaluation of seismic hazard from inversion structures is problematic because of their slow slip rate and long recurrence intervals, and also because their surface expression is structurally complex and often obscured. Structural‐stratigraphic complexity is compounded by competition between inversion structures and younger, more optimally oriented thrust faults, and by subsidiary strike‐slip accompanying inversion.


  • Open Access

    The role of protothrusts in frontal accretion and accommodation of plate convergence, Hikurangi subduction margin, New Zealand

    by Philip M. Barnes, Francesca C. Ghisetti, Susan Ellis, Julia K. Morgan

    Protothrusts mark the onset of deformation at the toe of large subduction accretionary wedges. They are recognized in seismic reflection sections as small-displacement (tens of meters) faults seaward of the primary frontal thrust fault. Although assumed to reflect incipient accretionary deformation and to mark the location of future thrusts, few studies discuss their displacement properties, evolution, and kinematic role during frontal accretion and propagation of the subduction décollement. We analyze high-quality geophysical and bathymetric images of the spectacular 25-km-wide Hikurangi margin protothrust zone (PTZ), the structure of which varies along strike north and south of the colliding Bennett Knoll seamount. We provide a quantitative data set on protothrust scaling relationships and fractal fault population characteristics. Our analyses lead us to speculate on the importance of stratigraphic heterogeneity in structural development, and highlight the role of protothrust arrays in the formation of the frontal thrust. We document a migrating wave of protothrust activity in association with forward advancement of the décollement and deformation front. Shortening east of the present frontal thrust, calculated from displacements on seismically imaged faults and from subseismic faulting derived from power law relationships, reveal the significant role of the PTZ in accommodating shortening. There is possibly as much as ∼7.4 km and ∼4.0 km of shortening accommodated by the PTZ south and north, respectively, of Bennett Knoll seamount. As much as ∼90% of the total shortening may be accommodated at subseismic scale. These data indicate that the active PTZ, together with older accreted PTZs, may accommodate ∼10%–50% of the total margin-normal convergence rate at the Hikurangi margin.


  • Development of a 3D Velocity Model of the Canterbury, New Zealand, Region for Broadband Ground‐Motion Simulation

    by Robin L. Lee, Brendon A. Bradley, Francesca C. Ghisetti, Ethan M. Thomson

    A 3D model of the geologic structure and associated seismic velocities in the Canterbury, New Zealand, region is developed utilizing data from depth‐converted seismic reflection lines, petroleum and water‐well logs, and cone penetration tests and is implicitly guided by existing contour maps and geologic cross sections in data‐sparse subregions. The model, developed using geostatistical Kriging, explicitly represents the significant and regionally recognizable geologic surfaces that mark the boundaries between geologic units with distinct lithology and age. The model is examined in the form of both geologic surface elevation contour maps as well as vertical cross sections of shear‐wave velocity, with the most prominent features being the Banks Peninsula Miocene–Pliocene volcanic edifice and the Pegasus and Rakaia late Mesozoic–Neogene sedimentary basins. The adequacy of the modeled geologic surfaces is assessed through a residual analysis of point constraints used in the Kriging and qualitative comparisons with previous geologic models of subsets of the region. Seismic velocities for the lithological units between the geologic surfaces have also been derived, thus providing the necessary information for a Canterbury velocity model for use in broadband seismic‐wave propagation. The developed model also has application for the determination of depths to specified shear‐wave velocities for use in empirical ground‐motion modeling, which is explicitly discussed via an example.