Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Arthur Chris Trembanis has a total of 90 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Autonomous Exploration and Digital Documentation of Great Lakes Shipwrecks: A Multi-Platform Survey Framework for Maritime Heritage

    by Arthur C. Trembanis

    The preservation of submerged cultural heritage depends on the ability to locate, document, and monitor sites before they are degraded or lost. Although the North American Great Lakes contain thousands of exceptionally well-preserved shipwrecks, their large geographic extent and diverse operating environments present significant challenges for efficient archeological survey. This study presents a multi-platform autonomous survey framework developed and implemented during 2021–2022 field campaigns in Lake Michigan and Lake Ontario. The framework integrates autonomous underwater vehicles (AUVs), autonomous surface vehicles (ASVs), crewed vessels, side-scan sonar, multibeam bathymetry, magnetometry, optical imaging, and field-based data review within a hierarchical workflow comprising wide-area assessment (WAA) reconnaissance, high-resolution geophysical (HRG) mapping, adaptive mission refinement, and visual confirmation. The surveys produced 19.72 km2 of geophysical coverage, including side-scan sonar mosaics, bathymetric surfaces, magnetic anomaly maps, and optical imagery that supported archeological interpretation. A case study from Lake Ontario demonstrates the framework’s effectiveness through the confirmation of a previously undocumented wooden shipwreck using complementary acoustic, magnetic, and visual datasets. Beyond the individual discoveries, the results demonstrate how integrated autonomous systems improve survey efficiency, support adaptive decision-making, and provide scalable methods for digital documentation, baseline site characterization, long-term monitoring, and preservation of submerged cultural heritage in freshwater and marine environments.

  • Open Access

    SandHound: A quadruped robotic platform for integrated coastal topographic and geotechnical mapping

    by Jacob Stasiewicz, Arthur Trembanis, Jack Puleo, David Young, Brian McFall, Gaurav Savant, Nick Spore

  • Open Access

    GhostVision: Democratizing Derelict Gear Detection Using Low-Cost Sonar and Artificial Intelligence

    by Cameron S. Bodine, Kleio Baxevani, Naveed Abbasi, Jared Wierzbicki, Ophelia Christoph, Catherine Hughes, Onur Bagoren, Olivia Hines, Julia Greco, Arthur Trembanis

    Derelict crab pots (“ghost pots”) cause bycatch mortality, habitat degradation, and lost harvest in shallow coastal ecosystems. Existing detection and recovery programs rely on expert operators and high-cost sonar, limiting coverage and reproducibility. Here, we present GhostVision, an open-source framework that integrates low-cost consumer side-scan sonar with modern object-detection models to enable scalable, rapid post-processing and mapping of derelict gear. Mobile Mapping Units (MMUs) equipped with off-the-shelf fishfinders surveyed more than 1500 acres in Delaware’s Inland Bays between 2020 and 2022. Three architectures (YOLOv12, YOLOv26, RF-DETR) were trained on 3110 manually annotated sonar images and evaluated with both dataset-centric metrics and full pipeline implementation. YOLOv12 showed the strongest untuned operational performance (F1 = 0.512; recall = 0.922), while post-processing optimization produced comparable performance across all three models (F1 ≈ 0.71–0.73). Across 11 complete test recordings, end-to-end processing required only 8.87–9.79% of survey time (approximately 10–11× faster than real-time), supporting same-day analysis and recovery workflows. GhostVision can foster community engagement in derelict crab-pot removal by pairing low-cost sonar with AI to aid recovery efforts at management-relevant scales. By lowering financial and technical barriers, GhostVision provides a reproducible pathway for large-scale stewardship and supports future extensions to multi-class detection and autonomous platforms.


  • Open Access

    SandHound: A Quadruped Robotic Platform for Integrated Coastal Topographic and Geotechnical Mapping

    by Arthur Trembanis, Jacob Stasiewicz, Jack Puleo, David Young, Brian McFall, Gaurav Savant, Nicholas Spore

    Coastal zones are critical regions that support vital economic and ecological systems, yet they are increasingly threatened by erosion, sea-level rise, and extreme weather. Effective management of these environments can be supported by high-resolution, co-registered topographic and sedimentological datasets. Conventional methods to obtain subaerial topographic datasets such as ground-based real-time kinematic GPS surveys, Unmanned Aerial System (UAS) based Structure-from-Motion (SfM) photogrammetry, and fixed position light detection and ranging (lidar) are limited by safety, mobility, and the inability to capture both elevation and sediment properties simultaneously in dynamic coastal settings. We introduce SandHound, a quadruped unmanned ground vehicle (UGV-Q), modified and operated to conduct a complete and multi-faceted survey in the subaerial beach zone. SandHound’s integrated payload includes lidar for topographic mapping, and stereoscopic cameras for onboard grainsize prediction via SandSnap. Field experiments at the U.S. Army Corps of Engineers Field Research Facility (FRF) in Duck, North Carolina, were conducted to validate the system’s core functions. The evaluation focused on three components: (1) accuracy of SandHound’s topographic data compared to SfM and fixed position lidar, (2) effectiveness of the SandSnap system validated against physical sediment samples (Camsizer), and (3) assessmentof system mobility across a study area characterized by varied near-surface compaction (measured using external Dynamic Cone Penetrometer-DCP-tests). SandHound achieved comparable or improved elevation accuracy (RMSE ∼0.15 m) when compared to the fixed position lidar as a ground truth, out-performing UAS-based SfM (RMSE ∼ 0.24 m). SandHound achieved spatial coverage of (∼ 89%) of the study area, and reliable operation across the range of measured sediment conditions. Site-specific tuning of SandSnap yielded a median absolute percent error of ∼ 13.4% in median grain size (D50) when compared with Camsizer analyses, while DCP values from 0.47–5.02 MPa confirmed reliable quadruped operation across loose to moderately compact sediment. These results demonstrate that UGV-Q platforms can provide a safe, mobile, and efficient means of integrated topographic and sedimentological measurements, offering a robust new tool for coastal monitoring, erosion assessment, and post-storm reconnaissance.

  • Open Access

    Hydrodynamics and Sediment-Transport Pathways along a Mixed-Energy Spit-Inlet System: A Modeling Study at Chincoteague Inlet (Virginia, USA)

    by Ioannis Y. Georgiou, Francesca Messina, Mohiuddin Sakib, Shan Zou, Madeline Foster-Martinez, Martijn Bregman, Christopher J. Hein, Michael S. Fenster, Justin L. Shawler, Kaitlyn McPherran, et al.

    Tidal-inlet systems are dynamic features that respond to short-term (e.g., storms) and longer-term processes (e.g., sea-level rise, changes in tidal prism). The Chincoteague Inlet system, located along the northern Eastern Shore of Virginia (USA), is a dynamic coastal complex that experiences rapid change associated with sediment redistribution and a shifting inlet throat due to the southern elongation of adjacent Assateague Island. In this study, a numerical model based on Delft3D with coupled flow–waves, multiclass sediment transport, and morphologic feedback was developed to quantify the hydrodynamic and geomorphic controls within this rapidly evolving inlet–spit system and to develop a more comprehensive understanding of regional to local controls on sediment-transport pathways. Model results show that most of the sand transport along southern Assateague Island is sequestered nearshore and proximally in deeper sinks within Fishing Point, and, of that, only finer sand sizes are transported around the spit, confirming previous analysis and hypothesis. The model also showed that sand transport toward the south increases along Wallops Island and quantified spatially explicit transport trends for selected sediment classes, revealing that coarser sediment bypassing is a punctuated process that is proportional to storms.


  • Open Access

    Using Convolutional Neural Networks for Detection and Morphometric Analysis of Carolina Bays from Publicly Available Digital Elevation Models

    by Mark A. Lundine, Arthur C. Trembanis

    Carolina Bays are oriented and sandy-rimmed depressions that are ubiquitous throughout the Atlantic Coastal Plain (ACP). Their origin has been a highly debated topic since the 1800s and remains unsolved. Past population estimates of Carolina Bays have varied vastly, ranging between as few as 10,000 to as many as 500,000. With such a large uncertainty around the actual population size, mapping these enigmatic features is a problem that requires an automated detection scheme. Using publicly available LiDAR-derived digital elevation models (DEMs) of the ACP as training images, various types of convolutional neural networks (CNNs) were trained to detect Carolina bays. The detection results were assessed for accuracy and scalability, as well as analyzed for various morphologic, land-use and land cover, and hydrologic characteristics. Overall, the detector found over 23,000 Carolina Bays from southern New Jersey to northern Florida, with highest densities along interfluves. Carolina Bays in Delmarva were found to be smaller and shallower than Bays in the southeastern ACP. At least a third of Carolina Bays have been converted to agricultural lands and almost half of all Carolina Bays are forested. Few Carolina Bays are classified as open water basins, yet almost all of the detected Bays were within 2 km of a water body. In addition, field investigations based upon detection results were performed to describe the sedimentology of Carolina Bays. Sedimentological investigations showed that Bays typically have 1.5 m to 2.5 m thick sand rims that show a gradient in texture, with coarser sand at the bottom and finer sand and silt towards the top. Their basins were found to be 0.5 m to 2 m thick and showed a mix of clayey, silty, and sandy deposits. Last, the results compiled during this study were compared to similar depressional features (i.e., playa-lunette systems) to pinpoint any similarities in origin processes. Altogether, this study shows that CNNs are valuable tools for automated geomorphic feature detection and can lead to new insights when coupled with various forms of remotely sensed and field-based datasets.


  • Open Access

    Developing a CNN for automated detection of Carolina bays from publicly available LiDAR data

    by Mark Lundine, Arthur Trembanis

    For over a century, the enigmatic Carolina bays have captivated geologists and spurred contentious debate on their origin. These circular to ovate and shallow (median diameter of 222 m, median depth of 2.17 m, median area of 26,249 sq. m) depressions span the Atlantic Coastal Plain (ACP) from northern Florida to southern New Jersey, with total counts ranging between 10,000 and 500,000. Using 1 meter gridded, 1.7 km by 1.7 km LiDAR digital elevation models (DEMs) of Delaware as training images, a convolutional neural network (CNN) was trained to detect Carolina bays. With such a large population size and with such uncertainty around the actual population size, mapping the Carolina bays is a problem that requires an automated detection scheme. Manual detection of bays from LiDAR across the entire Atlantic Coastal Plain would be extremely time intensive and prone to human annotation errors. Using Faster R-CNN within the TensorFlow Python library, a network was trained on 978 LiDAR images for 24 hours (42,450 iterations) on an Intel Core i7-4790K CPU at 4.00 GHz. This network automatically detects bays from LiDAR images with a bounding box and a confidence level. These bounding boxes can then be used to subset and then analyze regions of the DEM for statistics on the bays’ three-dimensional shape. Extending this algorithm to DEMs from other areas of the ACP will provide a better understanding of the bays’ geographic distribution as well as any differences in morphology between different geographic regions. This method for detecting geomorphic features is a highly efficient process that will provide better means for mapping various types of abundant geomorphic features in the future.


  • Open Access

    Benthic Habitat Morphodynamics-Using Remote Sensing to Quantify Storm-Induced Changes in Nearshore Bathymetry and Surface Sediment Texture at Assateague National Seashore

    by Arthur Trembanis, Alimjan Abla, Ken Haulsee, Carter DuVal

    This study utilizes repeated geoacoustic mapping to quantify the morphodynamic response of the nearshore to storm-induced changes. The aim of this study was to quantitatively map the nearshore zone of Assateague Island National Seashore (ASIS) to determine what changes in bottom geomorphology and benthic habitats are attributable to storm events including hurricane Sandy and the passage of hurricane Joaquin. Specifically, (1) the entire domain of the National Parks Service offshore area was mapped with side-scan sonar and multibeam bathymetry at a resolution comparable to that of the existing pre-storm survey, (2) a subset of the benthic stations were resampled that represented all sediment strata previously identified, and (3) newly obtained data were compared to that from the pre-storm survey to determined changes that could be attributed to specific storms such as Sandy and Joaquin. Capturing event specific dynamics requires rapid response surveys in close temporal association of the before and after period. The time-lapse between the pre-storm surveys for Sandy and our study meant that only a time and storm integrated signature for that storm could be obtained whereas with hurricane Joaquin we could identify impacts to the habitat type and geomorphology more directly related to that particular storm. This storm impacts study provides for the National Park Service direct documentation of storm-related changes in sediments and marine habitats on multiple scales: From large scale, side-scan sonar maps and interpretation of acoustic bottom types, to characterize as fully as possible habitats from 1 to 10 m up to many kilometer scales, as well as from point benthic samples within each sediment stratum and these results can help guide management of the island resources.