Heeyeop Chae
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Heeyeop Chae has a total of 316 co-authors. Here are the top co-authors by number of shared publications:
- Sung-Min Cho
Department of Surgery, Division of Cardiac Surgery, Johns Hopkins School of Medicine, Baltimore, Md
11 shared publications - Chang-Koo Kim
Ajou University
8 shared publications - Donggeun Jung
Department of Physics, Institute of Basic Science, Brain Korea 21 Physics Research Division, Sungkyunkwan University, Suwon, South Korea
8 shared publications Sung Min Cho
School of Chemical Engineering Sungkyunkwan University (SKKU) Suwon Republic of Korea
8 shared publicationsWei Jiang
Department of Materials Science and Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea
8 shared publications- Daekyoung Kim
Nanosys, Inc. Milpitas CA
7 shared publications
Latest Publications
- 29 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (41) , 19891-19899
Efficient and stable green-emitting AgInGaS/AgGaS 2 /ZnGaS quantum dots
Zn-based shell growth on AIGS/AGS quantum dots introduces defects under Ga-deficient conditions. A Ga-rich environment suppresses defect formation, and the resulting ZnGaS outer shell improves oxidation stability by 2.4-fold.
- 29 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (41) , 19891-19899
Efficient and stable green-emitting AgInGaS/AgGaS 2 /ZnGaS quantum dots
Zn-based shell growth on AIGS/AGS quantum dots introduces defects under Ga-deficient conditions. A Ga-rich environment suppresses defect formation, and the resulting ZnGaS outer shell improves oxidation stability by 2.4-fold.
- Open Access
- 26 August 2026
- Published by Springer Nature in Journal of Information Display
- Vol. 27 (3) , 20
Enhanced stability and direct patterning of quantum dot films via plasma-induced ligand polymerization
- 26 August 2026
- Published by Springer Nature in Journal of Information Display
- Vol. 27 (3) , 20
Open AccessEnhanced stability and direct patterning of quantum dot films via plasma-induced ligand polymerization
- 20 August 2026
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 46 (6) , 98
Plasma Etching of SiO2 Using Pentafluoropropanol and Hexafluoroisopropanol as Low Global Warming Potential Alternatives to C4F8
- 20 August 2026
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 46 (6) , 98
Plasma Etching of SiO2 Using Pentafluoropropanol and Hexafluoroisopropanol as Low Global Warming Potential Alternatives to C4F8
- 23 June 2026
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (17)
Photolithographic Patterning of Colloidal Quantum Dots Enabled by Plasma‐Induced Ligand Polymerization
The ligands on the indium phosphide (InP) quantum dot (QD) are crossed‐linked through plasma‐induced ligand polymerization (PILP) by exposing the QD films to energetic Ar ions generated in an inductively coupled plasma (ICP). Following the PILP treatment, 3 um‐scale QD patterns were demonstrated using a photolithography process in this work. In the first step, the oleic acid (OA) ligands on InP QDs were cross‐linked by ions having energy in the range of 100–400 V in plasma. The cross‐linking OA was verified from C═C─H bond peak at 3006 cm −1 in Fourier‐transform infrared (FT‐IR) spectra. The energy dose required for cross‐linking was estimated from ion flux, bias voltage, and processing time. The energy dose of 5.9–6.6 J/cm 2 was identified as appropriate dose range enabling cross‐linking of the ligands. In the second step, the photoresist (PR) was coated on the top of the cross‐linked QD films, and PR patterns were formed with UV exposure followed by PR development. In the final step, the unmasked QD regions were removed by ion sputter etching in an Ar plasma, and 3 µm‐scale patterns were demonstrated. This work demonstrates that PILP is an effective approach for microscale QD patterning.
- 23 June 2026
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (17)
Photolithographic Patterning of Colloidal Quantum Dots Enabled by Plasma‐Induced Ligand Polymerization
The ligands on the indium phosphide (InP) quantum dot (QD) are crossed‐linked through plasma‐induced ligand polymerization (PILP) by exposing the QD films to energetic Ar ions generated in an inductively coupled plasma (ICP). Following the PILP treatment, 3 um‐scale QD patterns were demonstrated using a photolithography process in this work. In the first step, the oleic acid (OA) ligands on InP QDs were cross‐linked by ions having energy in the range of 100–400 V in plasma. The cross‐linking OA was verified from C═C─H bond peak at 3006 cm −1 in Fourier‐transform infrared (FT‐IR) spectra. The energy dose required for cross‐linking was estimated from ion flux, bias voltage, and processing time. The energy dose of 5.9–6.6 J/cm 2 was identified as appropriate dose range enabling cross‐linking of the ligands. In the second step, the photoresist (PR) was coated on the top of the cross‐linked QD films, and PR patterns were formed with UV exposure followed by PR development. In the final step, the unmasked QD regions were removed by ion sputter etching in an Ar plasma, and 3 µm‐scale patterns were demonstrated. This work demonstrates that PILP is an effective approach for microscale QD patterning.
- 14 May 2026
- Published by Elsevier in Applied Surface Science
- Vol. 742
Plasma-assisted thermal atomic layer etching of ruthenium via O2/Ar plasma oxidation and formic acid chelation
- 14 May 2026
- Published by Elsevier in Applied Surface Science
- Vol. 742
Plasma-assisted thermal atomic layer etching of ruthenium via O2/Ar plasma oxidation and formic acid chelation
- 19 March 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (6) , 11382
Optical emission spectral analysis using FastICA for diagnosing wafer edge uniformity in plasma etching
Spatially integrated signals in optical emission spectroscopy (OES) inherently mask localized reaction dynamics at the wafer edge. This study applies independent component analysis (ICA) to standard plasma emission spectra to resolve this spatial limitation without hardware modification. The FastICA algorithm decouples edge-specific transient dynamics from the bulk plasma background. Subsequently, second-order temporal derivative analytics isolate the distinct oscillatory signature induced by the edge-localized impedance mismatch. Analysis reveals that a characteristic intensity modulation of argon emission lines correlates with transient shifts in the electron energy distribution function (EEDF). The predictive model, validated via leave-one-out cross-validation (LOOCV), achieves a cross-validated coefficient of determination Q 2 of 0.913. These results demonstrate that the proposed method provides a highly reliable and robust computational alternative to dedicated spatial sensors for diagnosing wafer edge uniformity. This computational framework transforms a standard 1D optical sensor into a spatially resolvable diagnostic tool.
- 19 March 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (6) , 11382
Optical emission spectral analysis using FastICA for diagnosing wafer edge uniformity in plasma etching
Spatially integrated signals in optical emission spectroscopy (OES) inherently mask localized reaction dynamics at the wafer edge. This study applies independent component analysis (ICA) to standard plasma emission spectra to resolve this spatial limitation without hardware modification. The FastICA algorithm decouples edge-specific transient dynamics from the bulk plasma background. Subsequently, second-order temporal derivative analytics isolate the distinct oscillatory signature induced by the edge-localized impedance mismatch. Analysis reveals that a characteristic intensity modulation of argon emission lines correlates with transient shifts in the electron energy distribution function (EEDF). The predictive model, validated via leave-one-out cross-validation (LOOCV), achieves a cross-validated coefficient of determination Q 2 of 0.913. These results demonstrate that the proposed method provides a highly reliable and robust computational alternative to dedicated spatial sensors for diagnosing wafer edge uniformity. This computational framework transforms a standard 1D optical sensor into a spatially resolvable diagnostic tool.
- 16 February 2026
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 43 (5) , 1403-1413
Temperature Effects on Reaction Kinetics of Hydrogenated Amorphous Carbon Deposition in Inductively Coupled C2H2 Plasmas
- 16 February 2026
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 43 (5) , 1403-1413
Temperature Effects on Reaction Kinetics of Hydrogenated Amorphous Carbon Deposition in Inductively Coupled C2H2 Plasmas
- 27 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (11) , 4389-4403
PMA-interlayered hole transport layers enabling sub-bandgap emission and improved stability in perovskite LEDs
Perovskite light-emitting diodes (PeLEDs) have drawn significant attention for their excellent optoelectronic properties. Although efficiency has improved rapidly, reducing driving voltage and enhancing stability remain key challenges. Here, we propose an interfacial engineering strategy using phosphomolybdic acid (PMA) as a p-type dopant-like interlayer, forming a PMA-sandwiched structure within the hole transport layer (HTL). A PeLED with a [ITO/PEDOT:PSS/TFB/PMA/TFB/Perovskite/TPBi/LiF/Al] configuration exhibited a reduced turn-on voltage (Von) of 2.7 V, compared to 3.4 V in the control device. The p-doping-like effect of PMA improved hole injection and transport, as supported by UV-vis absorption, hole-only device characteristics, time-resolved photoluminescence, and capacitance–voltage measurements. Furthermore, to match the enhanced hole mobility, a bilayer electron transport layer (ETL) incorporating PO-T2T was introduced. The resulting device achieved excellent charge balance, with a Von of 2.1 V—below the 2.38 eV bandgap corresponding to 522 nm emission—and a peak power efficiency of 50.03 lm W−1. The operational lifetime was extended by approximately four-fold compared to that of the control. This study presents a simple and effective strategy for achieving low-voltage and stable PeLEDs via HTL interfacial engineering using solution-processable PMA.
- 27 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (11) , 4389-4403
PMA-interlayered hole transport layers enabling sub-bandgap emission and improved stability in perovskite LEDs
Perovskite light-emitting diodes (PeLEDs) have drawn significant attention for their excellent optoelectronic properties. Although efficiency has improved rapidly, reducing driving voltage and enhancing stability remain key challenges. Here, we propose an interfacial engineering strategy using phosphomolybdic acid (PMA) as a p-type dopant-like interlayer, forming a PMA-sandwiched structure within the hole transport layer (HTL). A PeLED with a [ITO/PEDOT:PSS/TFB/PMA/TFB/Perovskite/TPBi/LiF/Al] configuration exhibited a reduced turn-on voltage (Von) of 2.7 V, compared to 3.4 V in the control device. The p-doping-like effect of PMA improved hole injection and transport, as supported by UV-vis absorption, hole-only device characteristics, time-resolved photoluminescence, and capacitance–voltage measurements. Furthermore, to match the enhanced hole mobility, a bilayer electron transport layer (ETL) incorporating PO-T2T was introduced. The resulting device achieved excellent charge balance, with a Von of 2.1 V—below the 2.38 eV bandgap corresponding to 522 nm emission—and a peak power efficiency of 50.03 lm W−1. The operational lifetime was extended by approximately four-fold compared to that of the control. This study presents a simple and effective strategy for achieving low-voltage and stable PeLEDs via HTL interfacial engineering using solution-processable PMA.
- 16 December 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (4) , 1898-1904
Control of the photoluminescence bandwidth of ZnTeSe quantum dots by suppressing the Te cluster effect
To examine effect of Te spatial confinement on Te clustering, ZnTeSe QDs were prepared with center or surface-doped Te. Center-doped ZnTeSe QDs effectively suppressed Te clustering, showing PL at 531 nm with a narrow FWHM of 39 nm and a high QY of 89%.
- 16 December 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (4) , 1898-1904
Control of the photoluminescence bandwidth of ZnTeSe quantum dots by suppressing the Te cluster effect
To examine effect of Te spatial confinement on Te clustering, ZnTeSe QDs were prepared with center or surface-doped Te. Center-doped ZnTeSe QDs effectively suppressed Te clustering, showing PL at 531 nm with a narrow FWHM of 39 nm and a high QY of 89%.
- 15 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 39 (1) , 74-81
Data-Driven Endpoint Detection for Small Open Area Etching Using Interpretable Transfer Learning
Accurate endpoint detection is critical in semiconductor plasma etching. Optical emission spectroscopy data contains information about the endpoint, but its analysis requires significant domain knowledge, and it contains large noise when the open area ratio is small. This paper proposes an interpretable data-driven endpoint detection method for small open area etching, leveraging transfer learning. First, we propose a formal metric quantifying the significance of endpoint trend in each wavelength signal and select the wavelength signals that are most sensitive to endpoint variations. Second, we devise an asymmetric autoencoder to uncover the endpoint trend in the noisy signals. Its asymmetric architecture incorporates nonlinear characteristics while ensuring the latent feature reflects the endpoint trends of the individual signals. Experimental results show that the model that learned the large open area etching (11.1%) can detect the endpoints of the small open area etching (0.5%) with the relative mean absolute error less than 0.6%, and amplify the signal-to-noise ratio by a factor of 2-3. Furthermore, the analysis of the selected wavelengths provides deeper insights into the underlying physical processes. The proposed method can be applied with minimal domain knowledge, while its results allow for exploring physical interpretations.
- 15 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 39 (1) , 74-81
Data-Driven Endpoint Detection for Small Open Area Etching Using Interpretable Transfer Learning
Accurate endpoint detection is critical in semiconductor plasma etching. Optical emission spectroscopy data contains information about the endpoint, but its analysis requires significant domain knowledge, and it contains large noise when the open area ratio is small. This paper proposes an interpretable data-driven endpoint detection method for small open area etching, leveraging transfer learning. First, we propose a formal metric quantifying the significance of endpoint trend in each wavelength signal and select the wavelength signals that are most sensitive to endpoint variations. Second, we devise an asymmetric autoencoder to uncover the endpoint trend in the noisy signals. Its asymmetric architecture incorporates nonlinear characteristics while ensuring the latent feature reflects the endpoint trends of the individual signals. Experimental results show that the model that learned the large open area etching (11.1%) can detect the endpoints of the small open area etching (0.5%) with the relative mean absolute error less than 0.6%, and amplify the signal-to-noise ratio by a factor of 2-3. Furthermore, the analysis of the selected wavelengths provides deeper insights into the underlying physical processes. The proposed method can be applied with minimal domain knowledge, while its results allow for exploring physical interpretations.