Alexander Gurko
Research Subjects
Alexander Gurko has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Oleg Sergiyenko
Autonomous University of Baja California, Mexicali, Mexico
9 shared publications - Vera Tyrsa
Universidad Autónoma de Baja California
8 shared publications - Julio Cesar Rodriguez Quiñonez
Universidad Autónoma de Baja California
7 shared publications - Daniel Hernandez-Balbuena
Universidad Autónoma de Baja California
6 shared publications - Lars Lindner
Universidad Autónoma de Baja California, México
4 shared publications - Paolo Mercorelli
Institute for Production Technology and Systems (IPTS), Leuphana Universität Lüneburg, 21335 Lüneburg, Germany
4 shared publications
Latest Publications
- Open Access
- 29 November 2022
- Published by Kharkiv National Automobile and Highway University in Bulletin of Kharkov National Automobile and Highway University
- No. 98,p. 37
Bio-inspired methods for planning the path of mobile robots
Біонатхненні інтелектуальні алгоритми є різновидом методів оптимізації, що знайшли широке використання у мобільній робототехніці. У даній роботі представлено огляд біонатхненних алгоритмів, що використовуються для планування шляху автономних мобільних роботів у заздалегідь невідомій місцевості. Запропоновано класифікацію біонатхненних алгоритмів оптимізації. Проведено аналіз основних алгоритмів ройового інтелекту та наведені відповідні ним псевдокоди.
- 29 November 2022
- Published by Kharkiv National Automobile and Highway University in Bulletin of Kharkov National Automobile and Highway University
- No. 98,p. 37
Open AccessBio-inspired methods for planning the path of mobile robots
Біонатхненні інтелектуальні алгоритми є різновидом методів оптимізації, що знайшли широке використання у мобільній робототехніці. У даній роботі представлено огляд біонатхненних алгоритмів, що використовуються для планування шляху автономних мобільних роботів у заздалегідь невідомій місцевості. Запропоновано класифікацію біонатхненних алгоритмів оптимізації. Проведено аналіз основних алгоритмів ройового інтелекту та наведені відповідні ним псевдокоди.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A PSO-Based Controller Tuning for a Laser Technical Vision System
The effectiveness of mobile robots when operating in unknown, cluttered terrain requires fast and accurate detection of the slightest obstacles that can interfere with the robot movement. The present paper is a continuation of research on improving the robot Laser Technical Vision System. Using Particle Swarm Optimization Algorithm performed an optimal tuning of the proportional-derivative controller parameters for the DC motor of a laser positioning system to improve the positioning speed. It is shown, that the resulting controller is robust, i.e. has a weak sensitivity to the parametric uncertainties of the motor model.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A PSO-Based Controller Tuning for a Laser Technical Vision System
The effectiveness of mobile robots when operating in unknown, cluttered terrain requires fast and accurate detection of the slightest obstacles that can interfere with the robot movement. The present paper is a continuation of research on improving the robot Laser Technical Vision System. Using Particle Swarm Optimization Algorithm performed an optimal tuning of the proportional-derivative controller parameters for the DC motor of a laser positioning system to improve the positioning speed. It is shown, that the resulting controller is robust, i.e. has a weak sensitivity to the parametric uncertainties of the motor model.
- Open Access
- 30 November 2021
- Published by Kharkiv National Automobile and Highway University in Vehicle and Electronics. Innovative Technologies
- No. 20,p. 27-36
Robust laser positioning in a mobile robot machine vision system
Problem. Laser scanning devices are widely used in Machine Vision Systems (MVS) of an autonomous mobile robot for solving SLAM problems. One of the concerns with MVS operation is the ability to detect relatively small obstacles. This requires scanning a limited sector within the field of view or even focusing on a specific point of space. The accuracy of the laser beam positioning is hampered by various kinds of uncertainties both due to the model simplifying and using inaccurate values of its parameters, as well as lacking information about perturbations. Goal. This paper presents the improvement of the MVS, described in previous works of the authors, by robust control of the DC motor, which represents the Positioning Laser drive. Methodology. For this purpose, a DC motor model is built, taking into account the parametric uncertainty. A robust digital PD controller for laser positioning is designed, and a comparative evaluation of the robust properties of the obtained control system with a classical one is carried out. The PWM signal formation by the microcontroller and processes in the H-bridge are also taken into account. Results. The obtained digital controller meets the transient process and accuracy requirements and combines the simplicity of a classic controller with a weak sensitivity to the parametric uncertainties of the drive model. Originality. The originality of the paper is in its focus on the MVS of the autonomous mobile robot developed by the authors. Practical value. The implementation of the MVS with the proposed controller will increase the reliability of obstacles detection within a robot field of view and the accuracy of environment mapping.
- 30 November 2021
- Published by Kharkiv National Automobile and Highway University in Vehicle and Electronics. Innovative Technologies
- No. 20,p. 27-36
Open AccessRobust laser positioning in a mobile robot machine vision system
Problem. Laser scanning devices are widely used in Machine Vision Systems (MVS) of an autonomous mobile robot for solving SLAM problems. One of the concerns with MVS operation is the ability to detect relatively small obstacles. This requires scanning a limited sector within the field of view or even focusing on a specific point of space. The accuracy of the laser beam positioning is hampered by various kinds of uncertainties both due to the model simplifying and using inaccurate values of its parameters, as well as lacking information about perturbations. Goal. This paper presents the improvement of the MVS, described in previous works of the authors, by robust control of the DC motor, which represents the Positioning Laser drive. Methodology. For this purpose, a DC motor model is built, taking into account the parametric uncertainty. A robust digital PD controller for laser positioning is designed, and a comparative evaluation of the robust properties of the obtained control system with a classical one is carried out. The PWM signal formation by the microcontroller and processes in the H-bridge are also taken into account. Results. The obtained digital controller meets the transient process and accuracy requirements and combines the simplicity of a classic controller with a weak sensitivity to the parametric uncertainties of the drive model. Originality. The originality of the paper is in its focus on the MVS of the autonomous mobile robot developed by the authors. Practical value. The implementation of the MVS with the proposed controller will increase the reliability of obstacles detection within a robot field of view and the accuracy of environment mapping.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3200-3205
Reduction of Angular Position Error of a Machine Vision System Using the Digital Controller LM629
A new approach to position the Technical Vision System (TVS) laser ray, which determines the 3D coordinates of any object under observation in the TVS Field-of-View (FOV), using the Digital Controller LM629 is proposed. This approach reduces significantly the angular position error by at least 82.97 per cent, compared to the previous implementation of a proportional algorithm in closed-loop configuration, using directly a single microcontroller. Present paper identifies the behavior of the DC motor shaft, which represents the main actuator of the TVS Positioning Laser (PL), adjusting an internal trapezoidal velocity profile, generated as the control signal for the DC motor. The reference value for the DC motor actual angular position is computed, using the Digital Controller LM629, which also tracks this actual angular position. The methodology of the new approach is developed in accordance with theoretical concepts. In addition, experimental results show the comparison between the previous implementation and this new approach.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3200-3205
Reduction of Angular Position Error of a Machine Vision System Using the Digital Controller LM629
A new approach to position the Technical Vision System (TVS) laser ray, which determines the 3D coordinates of any object under observation in the TVS Field-of-View (FOV), using the Digital Controller LM629 is proposed. This approach reduces significantly the angular position error by at least 82.97 per cent, compared to the previous implementation of a proportional algorithm in closed-loop configuration, using directly a single microcontroller. Present paper identifies the behavior of the DC motor shaft, which represents the main actuator of the TVS Positioning Laser (PL), adjusting an internal trapezoidal velocity profile, generated as the control signal for the DC motor. The reference value for the DC motor actual angular position is computed, using the Digital Controller LM629, which also tracks this actual angular position. The methodology of the new approach is developed in accordance with theoretical concepts. In addition, experimental results show the comparison between the previous implementation and this new approach.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Machine vision system for UAV navigation
Unmanned Aerial Vehicle (UAV) navigation requires Machine Vision Systems to determine physical values of near distanced objects. These machine vision systems must respond in sufficiently amount of time using less scanning data from the observed objects. A novel Technical Vision System (TVS), which uses DC motors and laser triangulation to determine spatial coordinates of these objects, is offered and used for UAV navigation. Present paper thereby shows the implementation of open-loop control algorithm, to position the TVS laser ray in the UAV Field of View (FOV). Issues of this implementation, experimental realization and results are presented, as the theoretical concept of a continuous FOV derived.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Machine vision system for UAV navigation
Unmanned Aerial Vehicle (UAV) navigation requires Machine Vision Systems to determine physical values of near distanced objects. These machine vision systems must respond in sufficiently amount of time using less scanning data from the observed objects. A novel Technical Vision System (TVS), which uses DC motors and laser triangulation to determine spatial coordinates of these objects, is offered and used for UAV navigation. Present paper thereby shows the implementation of open-loop control algorithm, to position the TVS laser ray in the UAV Field of View (FOV). Issues of this implementation, experimental realization and results are presented, as the theoretical concept of a continuous FOV derived.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 371-376
UAV remote laser scanner improvement by continuous scanning using DC motors
Previous research have shown the advantages of a novel Technical Vision System (TVS), developed at the Autonomous University of Baja California (UABC), which uses triangulation to determine spatial coordinates on any object under observation. Present paper proposes a new application for the TVS use on drones with remote laser scanner in agriculture to determine a vegetation index of scanned crops. Thereby the needed algorithm to position the laser ray in the TVS field-of-view are proposed, implemented using microcontroller and tested using various experimental factors. Experimentation results shows the advantages and disadvantages of every algorithm comparing the positioning errors after control.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 371-376
UAV remote laser scanner improvement by continuous scanning using DC motors
Previous research have shown the advantages of a novel Technical Vision System (TVS), developed at the Autonomous University of Baja California (UABC), which uses triangulation to determine spatial coordinates on any object under observation. Present paper proposes a new application for the TVS use on drones with remote laser scanner in agriculture to determine a vegetation index of scanned crops. Thereby the needed algorithm to position the laser ray in the TVS field-of-view are proposed, implemented using microcontroller and tested using various experimental factors. Experimentation results shows the advantages and disadvantages of every algorithm comparing the positioning errors after control.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1037-1042
Resolution improvement of accelerometers measurement for drones in agricultural applications
In agricultural tasks, monitoring of large fields is required. In the last years automatic/autonomous monitoring has been researched; where unmanned aerial vehicles (UAV)-commonly known as drones-are used. For these systems, constrains related with autonomy during flight arise. In order to control properly the UAVs during flight, they require to measure physical variables, in a fast and accurate way. Also, the weight of instruments must be reduced for improving autonomy. In general, aerial vehicles obtain parameters like position, velocity and acceleration using inertial navigation systems. Regarding to this concern, in this work application of a novel technique for measurements onboard UAVs-particularly inertial measurement unit or IMU-is proposed. There are accelerometers inside the IMU. These accelerometers have a frequency domain output. The speed and position are calculated by the INS from acceleration. The acceleration is obtained from frequency measurements of the accelerometers output. For this reason an accurate and fast frequency measurement method is required. In this work, for this particular application, frequency measurement using principle of rational approximations is proposed. This technique allows to measure frequency in short time and with high accuracy, using a few electronic components. Due this properties, it perfectly fits requirements for UAVs.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1037-1042
Resolution improvement of accelerometers measurement for drones in agricultural applications
In agricultural tasks, monitoring of large fields is required. In the last years automatic/autonomous monitoring has been researched; where unmanned aerial vehicles (UAV)-commonly known as drones-are used. For these systems, constrains related with autonomy during flight arise. In order to control properly the UAVs during flight, they require to measure physical variables, in a fast and accurate way. Also, the weight of instruments must be reduced for improving autonomy. In general, aerial vehicles obtain parameters like position, velocity and acceleration using inertial navigation systems. Regarding to this concern, in this work application of a novel technique for measurements onboard UAVs-particularly inertial measurement unit or IMU-is proposed. There are accelerometers inside the IMU. These accelerometers have a frequency domain output. The speed and position are calculated by the INS from acceleration. The acceleration is obtained from frequency measurements of the accelerometers output. For this reason an accurate and fast frequency measurement method is required. In this work, for this particular application, frequency measurement using principle of rational approximations is proposed. This technique allows to measure frequency in short time and with high accuracy, using a few electronic components. Due this properties, it perfectly fits requirements for UAVs.
- 15 May 2016
- Published by Springer Nature
- p. 177-196
Trajectory Tracking Control of an Excavator Arm Using Guaranteed Cost Control
- 15 May 2016
- Published by Springer Nature
- p. 177-196
Trajectory Tracking Control of an Excavator Arm Using Guaranteed Cost Control
- 1 January 2015
- Published by INSTICC
- p. 52-59
Guaranteed Control of a Robotic Excavator During Digging Process
- 1 January 2015
- Published by INSTICC
- p. 52-59
Guaranteed Control of a Robotic Excavator During Digging Process
- 1 March 2014
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 54, 159-169
Optical 3D laser measurement system for navigation of autonomous mobile robot
- 1 March 2014
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 54, 159-169
Optical 3D laser measurement system for navigation of autonomous mobile robot