Gwilherm Nénert
Research Subjects
Gwilherm Nénert has a total of 212 co-authors. Here are the top co-authors by number of shared publications:
- Alexander N. Vasiliev
Lomonosov Moscow State University
7 shared publications Clemens Ritter
Institut Laue Langevin, Diffraction Group BP 156, 6 rue Jules Horowitz, F-38042 Grenoble Cedex 9, France
6 shared publicationsC. Ritter
Institut Laue-Langevin Diffraction Group 6 rue Jules Horowitz BP 156 F-38042 Grenoble Cedex 9 France
4 shared publications- Giacomo Diego Gatta
Dipartimento di Scienze della Terra, Università degli Studi di Milano, Milan, Italy
4 shared publications M. Mangir Murshed
Institute of Inorganic Chemistry and Crystallography , Universität Bremen , FB02, Leobener Strasse /NW2 , D-28359 Bremen ; Germany
4 shared publicationsReinhard X. Fischer
4 shared publications
Latest Publications
- Open Access
- 25 February 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (5)
Orbital and magnetic ordering in the weak ferromagnet vanadium trifluoride VF 3
We report on an investigation of the low-temperature structural, thermal, and magnetic properties of the binary trifluoride VF 3 by temperature-dependent magnetization, heat capacity, electron paramagnetic resonance, and synchrotron powder and neutron powder diffraction measurements. At room temperature the crystal structure of VF 3 features V 3 + spin S = 1 regular triangular layers. At ∼ 120 K VF 3 undergoes a structural phase transition, and at ∼ 18 K it undergoes an antiferromagnetic phase transition. The structural phase transition involves a minute orthorhombic distortion of the regular octahedral fluorine coordination shell of the trivalent V cations, effecting a distortion to the monoclinic crystal system. The magnetic phase transition generates a weak ferromagnet with V magnetic moments essentially confined to the trigonal planes of the room temperature structure described in the space group R − 3 c . The ordered magnetic moments of the V 3 + cations amount to ≈ 1 μ B and is thus distinctly reduced from the spin-only magnetic moment of 2 μ B . This finding and the weak ferromagnetic moment are discussed in view of the low-symmetry structure and spin-orbit effects on the 3 T 1 cubic ground term of the V 3 + d 2 system.
- 25 February 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (5)
Open AccessOrbital and magnetic ordering in the weak ferromagnet vanadium trifluoride VF 3
We report on an investigation of the low-temperature structural, thermal, and magnetic properties of the binary trifluoride VF 3 by temperature-dependent magnetization, heat capacity, electron paramagnetic resonance, and synchrotron powder and neutron powder diffraction measurements. At room temperature the crystal structure of VF 3 features V 3 + spin S = 1 regular triangular layers. At ∼ 120 K VF 3 undergoes a structural phase transition, and at ∼ 18 K it undergoes an antiferromagnetic phase transition. The structural phase transition involves a minute orthorhombic distortion of the regular octahedral fluorine coordination shell of the trivalent V cations, effecting a distortion to the monoclinic crystal system. The magnetic phase transition generates a weak ferromagnet with V magnetic moments essentially confined to the trigonal planes of the room temperature structure described in the space group R − 3 c . The ordered magnetic moments of the V 3 + cations amount to ≈ 1 μ B and is thus distinctly reduced from the spin-only magnetic moment of 2 μ B . This finding and the weak ferromagnetic moment are discussed in view of the low-symmetry structure and spin-orbit effects on the 3 T 1 cubic ground term of the V 3 + d 2 system.
- 17 July 2025
- Published by Cambridge University Press (CUP) in Powder Diffraction
- Vol. 40 (3) , 179-182
Crystal structure of RbCdVO 4 from X-ray laboratory powder diffraction
Data mining for materials science and structure prediction is growing rapidly. Such an approach relies a lot on the available published and unpublished crystal structure. In this contribution, we are using the experimental pattern reported in the PDF entry 00-058-0728 for the experimental data used to solve the previously unreported crystal structure of RbCdVO 4 . Contrary to the reported literature, the title compound crystallizes in the monoclinic system P2 1 with Z = 4. The lattice parameters are a = 12.53678(16) Å, b = 5.82451(7) Å, c = 12.47733(17) Å, β = 105.6169(10)°, and V = 877.47(2) Å 3 . Its crystal structure type is new and quite complex as it exhibits 28 atoms in the asymmetric unit.
- 17 July 2025
- Published by Cambridge University Press (CUP) in Powder Diffraction
- Vol. 40 (3) , 179-182
Crystal structure of RbCdVO 4 from X-ray laboratory powder diffraction
Data mining for materials science and structure prediction is growing rapidly. Such an approach relies a lot on the available published and unpublished crystal structure. In this contribution, we are using the experimental pattern reported in the PDF entry 00-058-0728 for the experimental data used to solve the previously unreported crystal structure of RbCdVO 4 . Contrary to the reported literature, the title compound crystallizes in the monoclinic system P2 1 with Z = 4. The lattice parameters are a = 12.53678(16) Å, b = 5.82451(7) Å, c = 12.47733(17) Å, β = 105.6169(10)°, and V = 877.47(2) Å 3 . Its crystal structure type is new and quite complex as it exhibits 28 atoms in the asymmetric unit.
- Open Access
- 25 August 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (8) , 084606
High-pressure evolution of silver iodate and the phaseA phase of silver iodate, , has been obtained at ambient temperature by compressing to 1.60(5) GPa. The crystal structure was identified via Rietveld refinement of high-pressure powder synchrotron x-ray diffraction. The reflections were indexed to an orthorhombic lattice (Pbca) with unit-cell dimensions of , and at 2.20(5) GPa. Density-functional theory calculations predict that is more stable than above 0.15 GPa. The -phase transition is characterized by a decrease in the volume per formula unit of approximately 2% and it is reversible on decompression. Single-crystal optical-absorption measurements and density-functional theory calculations reveal the electronic band gap to decrease monotonically with increasing pressure in both α and γ phases, however the -phase transition (indirect indirect) is characterized by an abrupt band-gap energy increase of approximately . This pressure induced band-gap evolution is rationalized based on the I-O bond lengths. The γ phase may correspond to an intermediate step between the previously known α and β phases.- 25 August 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (8) , 084606
Open AccessHigh-pressure evolution of silver iodate and the phaseA phase of silver iodate, , has been obtained at ambient temperature by compressing to 1.60(5) GPa. The crystal structure was identified via Rietveld refinement of high-pressure powder synchrotron x-ray diffraction. The reflections were indexed to an orthorhombic lattice (Pbca) with unit-cell dimensions of , and at 2.20(5) GPa. Density-functional theory calculations predict that is more stable than above 0.15 GPa. The -phase transition is characterized by a decrease in the volume per formula unit of approximately 2% and it is reversible on decompression. Single-crystal optical-absorption measurements and density-functional theory calculations reveal the electronic band gap to decrease monotonically with increasing pressure in both α and γ phases, however the -phase transition (indirect indirect) is characterized by an abrupt band-gap energy increase of approximately . This pressure induced band-gap evolution is rationalized based on the I-O bond lengths. The γ phase may correspond to an intermediate step between the previously known α and β phases. - 3 August 2023
- Published by Cambridge University Press (CUP) in Powder Diffraction
- Vol. 38 (3) , 180-184
A new polymorphic form of Na 2 SeO 3 ·5H 2 O: structure determination from X-ray laboratory powder diffraction
A new polymorphic form of sodium selenite pentahydrate is reported in this contribution. We determined its crystal structure from laboratory powder diffraction data recorded at room temperature. It crystallizes in the monoclinic system P 2 1 / n with Z = 4. The lattice parameters are a = 15.01473(16) Å, b = 7.03125(7) Å, c = 8.13336(10) Å, β = 98.4458(10)°, and V = 849.345(16) Å 3 . The crystal structure exhibits a layered structure with isolated 1D chains running along the b -axis.
- 3 August 2023
- Published by Cambridge University Press (CUP) in Powder Diffraction
- Vol. 38 (3) , 180-184
A new polymorphic form of Na 2 SeO 3 ·5H 2 O: structure determination from X-ray laboratory powder diffraction
A new polymorphic form of sodium selenite pentahydrate is reported in this contribution. We determined its crystal structure from laboratory powder diffraction data recorded at room temperature. It crystallizes in the monoclinic system P 2 1 / n with Z = 4. The lattice parameters are a = 15.01473(16) Å, b = 7.03125(7) Å, c = 8.13336(10) Å, β = 98.4458(10)°, and V = 849.345(16) Å 3 . The crystal structure exhibits a layered structure with isolated 1D chains running along the b -axis.
- Open Access
- 2 March 2023
- Published by University of Huddersfield Press in British Journal of Pharmacy
- Vol. 8 (2)
Phase stability and polymorphism of a new naproxen salt
- 2 March 2023
- Published by University of Huddersfield Press in British Journal of Pharmacy
- Vol. 8 (2)
Open AccessPhase stability and polymorphism of a new naproxen salt
- 16 January 2022
- Published by International Union of Crystallography (IUCr) in Acta crystallographica Section B, Structural science, crystal engineering and materials
- Vol. 78 (1) , 20-32
Polytypism in mcalpineite: a study of natural and synthetic Cu3TeO6
Synthetic and naturally occurring forms of tricopper orthotellurate, CuII 3TeVIO6 (the mineral mcalpineite) have been investigated by 3D electron diffraction (3D ED), X-ray powder diffraction (XRPD), Raman and infrared (IR) spectroscopic measurements. As a result of the diffraction analyses, CuII 3TeVIO6 is shown to occur in two polytypes. The higher-symmetric CuII 3TeVIO6-1C polytype is cubic, space group Ia 3, with a = 9.537 (1) Å and V = 867.4 (3) Å3 as reported in previous studies. The 1C polytype is a well characterized structure consisting of alternating layers of CuIIO6 octahedra and both CuIIO6 and TeVIO6 octahedra in a patchwork arrangement. The structure of the lower-symmetric orthorhombic CuII 3TeVIO6-2O polytype was determined for the first time in this study by 3D ED and verified by Rietveld refinement. The 2O polytype crystallizes in space group Pcca, with a = 9.745 (3) Å, b = 9.749 (2) Å, c = 9.771 (2) Å and V = 928.3 (4) Å3. High-precision XRPD data were also collected on CuII 3TeVIO6-2O to verify the lower-symmetric structure by performing a Rietveld refinement. The resultant structure is identical to that determined by 3D ED, with unit-cell parameters a = 9.56157 (19) Å, b = 9.55853 (11) Å, c = 9.62891 (15) Å and V = 880.03 (2) Å3. The lower symmetry of the 2O polytype is a consequence of a different cation ordering arrangement, which involves the movement of every second CuIIO6 and TeVIO6 octahedral layer by (1/4, 1/4, 0), leading to an offset of TeVIO6 and CuIIO6 octahedra in every second layer giving an ABAB* stacking arrangement. Syntheses of CuII 3TeVIO6 showed that low-temperature (473 K) hydrothermal conditions generally produce the 2O polytype. XRPD measurements in combination with Raman spectroscopic analysis showed that most natural mcalpineite is the orthorhombic 2O polytype. Both XRPD and Raman spectroscopy measurements may be used to differentiate between the two polytypes of CuII 3TeVIO6. In Raman spectroscopy, CuII 3TeVIO6-1C has a single strong band around 730 cm−1, whereas CuII 3TeVIO6-2O shows a broad double maximum with bands centred around 692 and 742 cm−1.
- 16 January 2022
- Published by International Union of Crystallography (IUCr) in Acta crystallographica Section B, Structural science, crystal engineering and materials
- Vol. 78 (1) , 20-32
Polytypism in mcalpineite: a study of natural and synthetic Cu3TeO6
Synthetic and naturally occurring forms of tricopper orthotellurate, CuII 3TeVIO6 (the mineral mcalpineite) have been investigated by 3D electron diffraction (3D ED), X-ray powder diffraction (XRPD), Raman and infrared (IR) spectroscopic measurements. As a result of the diffraction analyses, CuII 3TeVIO6 is shown to occur in two polytypes. The higher-symmetric CuII 3TeVIO6-1C polytype is cubic, space group Ia 3, with a = 9.537 (1) Å and V = 867.4 (3) Å3 as reported in previous studies. The 1C polytype is a well characterized structure consisting of alternating layers of CuIIO6 octahedra and both CuIIO6 and TeVIO6 octahedra in a patchwork arrangement. The structure of the lower-symmetric orthorhombic CuII 3TeVIO6-2O polytype was determined for the first time in this study by 3D ED and verified by Rietveld refinement. The 2O polytype crystallizes in space group Pcca, with a = 9.745 (3) Å, b = 9.749 (2) Å, c = 9.771 (2) Å and V = 928.3 (4) Å3. High-precision XRPD data were also collected on CuII 3TeVIO6-2O to verify the lower-symmetric structure by performing a Rietveld refinement. The resultant structure is identical to that determined by 3D ED, with unit-cell parameters a = 9.56157 (19) Å, b = 9.55853 (11) Å, c = 9.62891 (15) Å and V = 880.03 (2) Å3. The lower symmetry of the 2O polytype is a consequence of a different cation ordering arrangement, which involves the movement of every second CuIIO6 and TeVIO6 octahedral layer by (1/4, 1/4, 0), leading to an offset of TeVIO6 and CuIIO6 octahedra in every second layer giving an ABAB* stacking arrangement. Syntheses of CuII 3TeVIO6 showed that low-temperature (473 K) hydrothermal conditions generally produce the 2O polytype. XRPD measurements in combination with Raman spectroscopic analysis showed that most natural mcalpineite is the orthorhombic 2O polytype. Both XRPD and Raman spectroscopy measurements may be used to differentiate between the two polytypes of CuII 3TeVIO6. In Raman spectroscopy, CuII 3TeVIO6-1C has a single strong band around 730 cm−1, whereas CuII 3TeVIO6-2O shows a broad double maximum with bands centred around 692 and 742 cm−1.
- 19 November 2020
- Published by Springer Nature in Physics and Chemistry of Minerals
- Vol. 47 (12) , 1-8
Crystal structure and thermal behavior of Bi$_6$Te$_2$O$_{15}$: investigation of synthetic and natural pingguite- 19 November 2020
- Published by Springer Nature in Physics and Chemistry of Minerals
- Vol. 47 (12) , 1-8
Crystal structure and thermal behavior of Bi$_6$Te$_2$O$_{15}$: investigation of synthetic and natural pingguite- 1 October 2020
- Published by Walter de Gruyter GmbH in Zeitschrift für Kristallographie - Crystalline Materials
- Vol. 235 (10) , 433-437
Crystal structure of the synthetic analogue of iwateite, Na2BaMn(PO4)2: an X-ray powder diffraction and Raman study
- 1 October 2020
- Published by Walter de Gruyter GmbH in Zeitschrift für Kristallographie - Crystalline Materials
- Vol. 235 (10) , 433-437
Crystal structure of the synthetic analogue of iwateite, Na2BaMn(PO4)2: an X-ray powder diffraction and Raman study
- Open Access
A High-Pressure Investigation of the Synthetic Analogue of Chalcomenite, CuSeO3∙2H2O
Synthetic chalcomenite-type cupric selenite CuSeO3∙2H2O has been studied at room temperature under compression up to pressures of 8 GPa by means of single-crystal X-ray diffraction, Raman spectroscopy, and density-functional theory. According to X-ray diffraction, the orthorhombic phase undergoes an isostructural phase transition at 4.0(5) GPa with the thermodynamic character being first-order. This conclusion is supported by Raman spectroscopy studies that have detected the phase transition at 4.5(2) GPa and by the first-principles computing simulations. The structure solution at different pressures has provided information on the change with pressure of unit–cell parameters as well as on the bond and polyhedral compressibility. A Birch–Murnaghan equation of state has been fitted to the unit–cell volume data. We found that chalcomenite is highly compressible with a bulk modulus of 42–49 GPa. The possible mechanism driving changes in the crystal structure is discussed, being the behavior of CuSeO3∙2H2O mainly dominated by the large compressibility of the coordination polyhedron of Cu. On top of that, an assignation of Raman modes is proposed based upon density-functional theory and the pressure dependence of Raman modes discussed. Finally, the pressure dependence of phonon frequencies experimentally determined is also reported.
Open AccessA High-Pressure Investigation of the Synthetic Analogue of Chalcomenite, CuSeO3∙2H2O
Synthetic chalcomenite-type cupric selenite CuSeO3∙2H2O has been studied at room temperature under compression up to pressures of 8 GPa by means of single-crystal X-ray diffraction, Raman spectroscopy, and density-functional theory. According to X-ray diffraction, the orthorhombic phase undergoes an isostructural phase transition at 4.0(5) GPa with the thermodynamic character being first-order. This conclusion is supported by Raman spectroscopy studies that have detected the phase transition at 4.5(2) GPa and by the first-principles computing simulations. The structure solution at different pressures has provided information on the change with pressure of unit–cell parameters as well as on the bond and polyhedral compressibility. A Birch–Murnaghan equation of state has been fitted to the unit–cell volume data. We found that chalcomenite is highly compressible with a bulk modulus of 42–49 GPa. The possible mechanism driving changes in the crystal structure is discussed, being the behavior of CuSeO3∙2H2O mainly dominated by the large compressibility of the coordination polyhedron of Cu. On top of that, an assignation of Raman modes is proposed based upon density-functional theory and the pressure dependence of Raman modes discussed. Finally, the pressure dependence of phonon frequencies experimentally determined is also reported.
- 22 November 2018
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 51 (6) , 1671-1683
In situdetection of a novel lysozyme monoclinic crystal form upon controlled relative humidity variation
The effect of relative humidity (rH) on protein crystal structures, an area that has attracted high scientific interest during the past decade, is investigated in this study on hen egg-white lysozyme (HEWL) polycrystalline precipitatesvia in situlaboratory X-ray powder diffraction (XRPD) measurements. For this purpose, HEWL was crystallized at room temperature and pH 4.5, leading to a novel monoclinic HEWL phase which, to our knowledge, has not been reported before. Analysis of XRPD data collected upon rH variation revealed several structural modifications. These observations, on a well-studied molecule like HEWL, underline not only the high impact of humidity levels on biological crystal structures, but also the significance of in-house XRPD as an analytical tool in industrial drug development and its potential to provide information for enhancing manufacturing of pharmaceuticals.
- 22 November 2018
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 51 (6) , 1671-1683
In situdetection of a novel lysozyme monoclinic crystal form upon controlled relative humidity variation
The effect of relative humidity (rH) on protein crystal structures, an area that has attracted high scientific interest during the past decade, is investigated in this study on hen egg-white lysozyme (HEWL) polycrystalline precipitatesvia in situlaboratory X-ray powder diffraction (XRPD) measurements. For this purpose, HEWL was crystallized at room temperature and pH 4.5, leading to a novel monoclinic HEWL phase which, to our knowledge, has not been reported before. Analysis of XRPD data collected upon rH variation revealed several structural modifications. These observations, on a well-studied molecule like HEWL, underline not only the high impact of humidity levels on biological crystal structures, but also the significance of in-house XRPD as an analytical tool in industrial drug development and its potential to provide information for enhancing manufacturing of pharmaceuticals.