Ricardo Starbird-Perez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ricardo Starbird-Perez has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
- Esteban Avendano
Centro de Investigación en Ciencia e Ingeniería de Materiales (CICIMA), Universidad de Costa Rica, San Pedro 11501-2060, Costa Rica
7 shared publications - Laria Rodríguez-Quesada
Centro de Investigación en Servicios Químicos y Microbiológicos (CEQIATEC), Escuela de Química, Instituto Tecnológico de Costa Rica, Cartago 159-7050, Costa Rica
7 shared publications - Karla Ramírez-Sánchez
Centro de Investigación en Servicios Químicos y Microbiológicos (CEQIATEC), Escuela de Química, Instituto Tecnológico de Costa Rica, Cartago 159-7050, Costa Rica
6 shared publications - Giovanni Sáenz-Arce
Departamento de Física, Universidad Nacional, Heredia 86-3000, Costa Rica
5 shared publications - Roger Moya
Escuela de Ingeniería Forestal, Instituto Tecnológico de Costa Rica
5 shared publications - Aura Ledezma-Espinoza
Centro de Investigación en Servicios Químicos y Microbiológicos (CEQIATEC), Escuela de Química, Instituto Tecnológico de Costa Rica, Cartago 159-7050, Costa Rica
4 shared publications
Latest Publications
- Open Access
Gamma-Irradiated Starch/Chitosan Composite Particles for the Adsorption of Neospora caninum Membrane Proteins as a Potential Vaccine Delivery Platform
Gamma irradiation offers a simple and reagent-free strategy for tailoring the physicochemical properties of starch for the development of functional biomaterials, although its application in protein delivery systems remains largely unexplored. In this study, starch was irradiated at doses between 50 and 500 kGy and combined with chitosan to produce composite particles for the adsorption of Neospora caninum membrane proteins (NcMP), with the aim of developing a potential intranasal vaccine delivery platform. Irradiation induced progressive oxidation and depolymerization of starch, as evidenced by Fourier transform infrared (FTIR) analysis, increased apparent amylose content, reduced molecular weight and hydrodynamic diameter, and shifted the zeta potential to −13.4 mV, leading to the selection of starch irradiated at 300 kGy for particle preparation. The resulting starch–chitosan particles exhibited spherical morphology and, following protein adsorption, formed a protein-associated nanosystem with a hydrodynamic diameter of 105.7 nm and a zeta potential of −18.8 mV. Protein association was confirmed by fluorescence co-localization and an adsorption efficiency of 34%. These findings demonstrate that gamma irradiation is an effective approach for engineering starch-based composite particles with physicochemical characteristics suitable for protein association and intranasal delivery, supporting their potential as a versatile platform for protein subunit vaccine formulations.
Open AccessGamma-Irradiated Starch/Chitosan Composite Particles for the Adsorption of Neospora caninum Membrane Proteins as a Potential Vaccine Delivery Platform
Gamma irradiation offers a simple and reagent-free strategy for tailoring the physicochemical properties of starch for the development of functional biomaterials, although its application in protein delivery systems remains largely unexplored. In this study, starch was irradiated at doses between 50 and 500 kGy and combined with chitosan to produce composite particles for the adsorption of Neospora caninum membrane proteins (NcMP), with the aim of developing a potential intranasal vaccine delivery platform. Irradiation induced progressive oxidation and depolymerization of starch, as evidenced by Fourier transform infrared (FTIR) analysis, increased apparent amylose content, reduced molecular weight and hydrodynamic diameter, and shifted the zeta potential to −13.4 mV, leading to the selection of starch irradiated at 300 kGy for particle preparation. The resulting starch–chitosan particles exhibited spherical morphology and, following protein adsorption, formed a protein-associated nanosystem with a hydrodynamic diameter of 105.7 nm and a zeta potential of −18.8 mV. Protein association was confirmed by fluorescence co-localization and an adsorption efficiency of 34%. These findings demonstrate that gamma irradiation is an effective approach for engineering starch-based composite particles with physicochemical characteristics suitable for protein association and intranasal delivery, supporting their potential as a versatile platform for protein subunit vaccine formulations.
- 30 April 2026
- Published by Springer Nature
- p. 125-135
Effect of Gamma Irradiation on the Obtention of Maize Starch-Based Particles via Electrospraying
- 30 April 2026
- Published by Springer Nature
- p. 125-135
Effect of Gamma Irradiation on the Obtention of Maize Starch-Based Particles via Electrospraying
- Open Access
- 26 April 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (18) , 8587-8596
A Greener Solid-State Route to Thermochromic VO 2 (M1) Powders: Low-Vacuum Synthesis with Minimal Waste and Tungsten Doping
- 26 April 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (18) , 8587-8596
Open AccessA Greener Solid-State Route to Thermochromic VO 2 (M1) Powders: Low-Vacuum Synthesis with Minimal Waste and Tungsten Doping
- Open Access
6 H Hydrothermal Synthesis of W-Doped VO2(M) for Smart Windows in Tropical Climates
Thermochromic smart windows are a promising technology to reduce energy consumption in buildings, particularly in tropical regions where cooling demands are high. Vanadium dioxide (VO2) is the most studied thermochromic material due to its reversible semiconductor-to-metal transition near 68 °C. Conventional synthesis routes require long reaction times and post-annealing steps. In this work, we report a rapid hydrothermal synthesis of monoclinic VO2(M) and tungsten-doped VO2(M) powders obtained within only 6 h at 270 °C, using vanadyl sulfate as precursor and controlled precipitation at pH ≈ 8.5. Differential scanning calorimetry confirmed the reversible transition at 59 °C for the undoped VO2, with a hysteresis of 18 °C, while tungsten doping reduced the transition temperature by ~17 °C per wt.% of W. X-ray diffraction verified the monoclinic phase with minor traces of VO2(B), a non-thermochromic polymorph of VO2, and microstructural analysis revealed crystallite sizes below 35 nm. Electron microscopy and dynamic light scattering confirmed particle sizes suitable for dispersion in polymeric matrices. This approach significantly reduces synthesis time compared to typical hydrothermal methods requiring 20–48 h and avoids further annealing. The resulting powders provide a low-cost and scalable route for fabricating thermochromic coatings with transition temperatures closer to ambient conditions, making them relevant for smart-window applications in tropical climates, where lower transition temperatures are generally regarded as beneficial.
Open Access6 H Hydrothermal Synthesis of W-Doped VO2(M) for Smart Windows in Tropical Climates
Thermochromic smart windows are a promising technology to reduce energy consumption in buildings, particularly in tropical regions where cooling demands are high. Vanadium dioxide (VO2) is the most studied thermochromic material due to its reversible semiconductor-to-metal transition near 68 °C. Conventional synthesis routes require long reaction times and post-annealing steps. In this work, we report a rapid hydrothermal synthesis of monoclinic VO2(M) and tungsten-doped VO2(M) powders obtained within only 6 h at 270 °C, using vanadyl sulfate as precursor and controlled precipitation at pH ≈ 8.5. Differential scanning calorimetry confirmed the reversible transition at 59 °C for the undoped VO2, with a hysteresis of 18 °C, while tungsten doping reduced the transition temperature by ~17 °C per wt.% of W. X-ray diffraction verified the monoclinic phase with minor traces of VO2(B), a non-thermochromic polymorph of VO2, and microstructural analysis revealed crystallite sizes below 35 nm. Electron microscopy and dynamic light scattering confirmed particle sizes suitable for dispersion in polymeric matrices. This approach significantly reduces synthesis time compared to typical hydrothermal methods requiring 20–48 h and avoids further annealing. The resulting powders provide a low-cost and scalable route for fabricating thermochromic coatings with transition temperatures closer to ambient conditions, making them relevant for smart-window applications in tropical climates, where lower transition temperatures are generally regarded as beneficial.
- 3 September 2025
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 21 (5) , 1-10
Effect of weathering on thickness, colour and chemical composition of one-side charring surface of tropical woods
- 3 September 2025
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 21 (5) , 1-10
Effect of weathering on thickness, colour and chemical composition of one-side charring surface of tropical woods
- Open Access
Biochar-Based Electrochemical Degradation System for Removing Pharmaceutical Pollutants from Aqueous Media as Potential Wastewater Treatment
The occurrence of pharmaceutical pollutants in aquatic matrices has been reported as an increasing concern around the world. Sustainable and feasible water treatment technologies are necessary to mitigate water pollution. In this study, we developed an environmentally friendly biochar electro-degradative system using biomass derived through green technologies. The system demonstrated exceptional removal efficiency, achieving over 99% removal of acetaminophen, sulindac, and carbamazepine following biochar electro-degradative treatment. Similar results were achieved from the mixture of the three compounds. The biochar column reusability confirmed the system stability, even after repeating the degradation cycles. Our findings highlight the potential of this novel electro-degradative system as an effective solution for the removal of pharmaceutical residues from wastewater.
Open AccessBiochar-Based Electrochemical Degradation System for Removing Pharmaceutical Pollutants from Aqueous Media as Potential Wastewater Treatment
The occurrence of pharmaceutical pollutants in aquatic matrices has been reported as an increasing concern around the world. Sustainable and feasible water treatment technologies are necessary to mitigate water pollution. In this study, we developed an environmentally friendly biochar electro-degradative system using biomass derived through green technologies. The system demonstrated exceptional removal efficiency, achieving over 99% removal of acetaminophen, sulindac, and carbamazepine following biochar electro-degradative treatment. Similar results were achieved from the mixture of the three compounds. The biochar column reusability confirmed the system stability, even after repeating the degradation cycles. Our findings highlight the potential of this novel electro-degradative system as an effective solution for the removal of pharmaceutical residues from wastewater.
- 24 October 2024
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 82 (6) , 2169-2180
Changes in chemical, physical and mechanical characteristics of three kinds of solid wood after one-sided surface charring
- 24 October 2024
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 82 (6) , 2169-2180
Changes in chemical, physical and mechanical characteristics of three kinds of solid wood after one-sided surface charring
- Open Access
- 16 October 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (43) , 43426-43437
Evaluation of Conductive Porous Biobased Composites with Tunable Mechanical Properties for Potential Biological Applications
In this work, starch-based porous cryogels with controlled mechanical and electrical properties were prepared for tissue engineering applications. The starch cryogels were formulated using κ-carrageenan, poly(vinyl alcohol) (PVA), and styrylpyridinium-substituted PVA (SbQ) into the composite. A conductive cryogel was polymerized by chemical oxidation of 3,4-ethylenedioxythiophene (EDOT) using iron(III) p-toluenesulfonate as a strategy to control the electrical properties. The physical, thermal, and mechanical properties were evaluated for the obtained composites. Macro- and nanoscale results confirmed the capability of tuning the mechanical properties of the material by the addition of biopolymers in different contents. The presence of κ-carrageenan significantly increased the storage modulus and decreased the damping effect in the formulations. The presence of PVA showed a plasticizing effect in the formulations, confirmed by the buffering effect and an increase in storage modulus. PVA-SBQ improved the mechanical properties by cross-linking. The addition of PEDOT increased the mechanical and electrical properties of the obtained materials.
- 16 October 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (43) , 43426-43437
Open AccessEvaluation of Conductive Porous Biobased Composites with Tunable Mechanical Properties for Potential Biological Applications
In this work, starch-based porous cryogels with controlled mechanical and electrical properties were prepared for tissue engineering applications. The starch cryogels were formulated using κ-carrageenan, poly(vinyl alcohol) (PVA), and styrylpyridinium-substituted PVA (SbQ) into the composite. A conductive cryogel was polymerized by chemical oxidation of 3,4-ethylenedioxythiophene (EDOT) using iron(III) p-toluenesulfonate as a strategy to control the electrical properties. The physical, thermal, and mechanical properties were evaluated for the obtained composites. Macro- and nanoscale results confirmed the capability of tuning the mechanical properties of the material by the addition of biopolymers in different contents. The presence of κ-carrageenan significantly increased the storage modulus and decreased the damping effect in the formulations. The presence of PVA showed a plasticizing effect in the formulations, confirmed by the buffering effect and an increase in storage modulus. PVA-SBQ improved the mechanical properties by cross-linking. The addition of PEDOT increased the mechanical and electrical properties of the obtained materials.
- Open Access
- 9 August 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (8) , 314
PEBAX® 5533D Formulation for Enhancement of Mechanical and Thermal Properties of Material Used in Medical Device Manufacturing
The medical device industry is constantly innovating in the search for materials that demonstrate superior performance, better intrinsic characteristics, profitability, and a positive impact on potential patients. The thermoplastic polymer resin Pebax® 5533D is one of the most widely used commercial materials for manufacturing medical device parts due to its easy processability. However, its mechanical and thermal properties require improvements to mitigate identified manufacturing defects, such as a decrease in material flexibility, high susceptibility to moisture, and thermal degradation during processing. Therefore, this study integrated different materials, such as plasticizers and filler additives, to produce a polymer compound prototype formula as a solution technique to enhance the current material’s performance. Modifying mechanical and rheological properties allows to evaluate the impacts on the polymeric material’s flexibility and thermal behavior. This was achieved by processing mixed additives using injector-molding equipment to obtain equal-molded samples of every formula. In addition, material characterization was performed to determine the variations in the samples’ crystallization, flexural strength, and moisture content. Calcium stearate was determined to be the most significant component serving as a mechanical resistance modifier and thermal stabilizer alongside calcium chloride as a moisture content reducer combined with Pebax® 5533D.
- 9 August 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (8) , 314
Open AccessPEBAX® 5533D Formulation for Enhancement of Mechanical and Thermal Properties of Material Used in Medical Device Manufacturing
The medical device industry is constantly innovating in the search for materials that demonstrate superior performance, better intrinsic characteristics, profitability, and a positive impact on potential patients. The thermoplastic polymer resin Pebax® 5533D is one of the most widely used commercial materials for manufacturing medical device parts due to its easy processability. However, its mechanical and thermal properties require improvements to mitigate identified manufacturing defects, such as a decrease in material flexibility, high susceptibility to moisture, and thermal degradation during processing. Therefore, this study integrated different materials, such as plasticizers and filler additives, to produce a polymer compound prototype formula as a solution technique to enhance the current material’s performance. Modifying mechanical and rheological properties allows to evaluate the impacts on the polymeric material’s flexibility and thermal behavior. This was achieved by processing mixed additives using injector-molding equipment to obtain equal-molded samples of every formula. In addition, material characterization was performed to determine the variations in the samples’ crystallization, flexural strength, and moisture content. Calcium stearate was determined to be the most significant component serving as a mechanical resistance modifier and thermal stabilizer alongside calcium chloride as a moisture content reducer combined with Pebax® 5533D.
- Open Access
Evaluating the Effect of Iron(III) in the Preparation of a Conductive Porous Composite Using a Biomass Waste-Based Starch Template
In this work, the effect of iron(III) in the preparation of a conductive porous composite using a biomass waste-based starch template was evaluated. Biopolymers are obtained from natural sources, for instance, starch from potato waste, and its conversion into value-added products is highly significant in a circular economy. The biomass starch-based conductive cryogel was polymerized via chemical oxidation of 3,4-ethylenedioxythiophene (EDOT) using iron(III) p-toluenesulfonate as a strategy to functionalize porous biopolymers. Thermal, spectrophotometric, physical, and chemical properties of the starch template, starch/iron(III), and the conductive polymer composites were evaluated. The impedance data of the conductive polymer deposited onto the starch template confirmed that at a longer soaking time, the electrical performance of the composite was improved, slightly modifying its microstructure. The functionalization of porous cryogels and aerogels using polysaccharides as raw materials is of great interest for applications in electronic, environmental, and biological fields.
Open AccessEvaluating the Effect of Iron(III) in the Preparation of a Conductive Porous Composite Using a Biomass Waste-Based Starch Template
In this work, the effect of iron(III) in the preparation of a conductive porous composite using a biomass waste-based starch template was evaluated. Biopolymers are obtained from natural sources, for instance, starch from potato waste, and its conversion into value-added products is highly significant in a circular economy. The biomass starch-based conductive cryogel was polymerized via chemical oxidation of 3,4-ethylenedioxythiophene (EDOT) using iron(III) p-toluenesulfonate as a strategy to functionalize porous biopolymers. Thermal, spectrophotometric, physical, and chemical properties of the starch template, starch/iron(III), and the conductive polymer composites were evaluated. The impedance data of the conductive polymer deposited onto the starch template confirmed that at a longer soaking time, the electrical performance of the composite was improved, slightly modifying its microstructure. The functionalization of porous cryogels and aerogels using polysaccharides as raw materials is of great interest for applications in electronic, environmental, and biological fields.